Used Liebherr R 313 Litronic for sale (258)

Condition: ready for operation (used), Year of construction: 2022, A fast-erecting tower crane Liebherr is available. Tower height: 22.8m, max. outreach: 25m, max. load capacity: 2500kg, hook height: 19.1m. Machine dimensions X/Y/Z: approx. 12000mm/2500mm/3500mm, weight: approx. 11300kg, control: radio control, operating hours: 8507h, load hours: 113h, next safety inspection (UVV): 06/2024. Includes bottom-slewing mechanism, 4x setup spindles with base plates, and jib. Documentation available. An on-site inspection is possible. Itodpsxaphzjfx Aaaop

Condition: used, Used 4-in-1 bucket from a Liebherr LR634 crawler loader. Transport dimensions / weight: 255 x 165 x 190 cm - 2.30 t. Iedpfsw T Rklsx Aaaetp

Condition: used, Gear skiving machine LIEBHERR LK 200 Isdpfx Ajuhbq Aeaaotp

Condition: used, mileage: 67,400 km, lifting height: 59,100 mm, Year of construction: 2018, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Identification Serial number: 076646 Other information Front tyres / undercarriage remaining: 0 Itjdpjtr Nuqofx Aaajp Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Upper engine: Perkins Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x4 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), functionality: fully functional, mileage: 180,264 km, fuel type: diesel, color: yellow, empty load weight: 23,500 kg, axle configuration: 2 axles, number of seats: 2, first registration: 07/1998, next inspection (TÜV): 07/2026, Year of construction: 1998, operating hours: 18,712 h, For sale: Liebherr 1030-2 truck crane with a lifting capacity of 30 tonnes. Technical condition: fully operational. The crane was overhauled in 2025. Details to be discussed during on-site inspection. The crane holds a valid technical inspection until 23/07/2026 and a current UDT operational permit valid until 31/07/2026. The vehicle has a valid third-party liability insurance policy. The vehicle is registered in Poland. The crane has been operated by the current owner since 2014. Purchase directly from the actual user! We are not intermediaries or traders. Itedpfoxava Rsx Aaaep On-site inspection and machine testing possible at the facility in Brodnica (87-300), Poland. The machine is ready for work.

Condition: used, functionality: fully functional, color: yellow, overall weight: 25,000 kg, Year of construction: 2014, Liebherr L 576 wheel loader, year: 2014, total weight 25t, used condition Iedpfx Aajw S I Dtjastp

Condition: used, Year of construction: 1969, max. wheel diameter 265 mm gear width 45 mm max. module 4 min. module 0,3 max. workpiece diameter 300 mm stroke length max. 0-50 mm stroke position adjustment 25 mm distance work spindle /surface of the table 170/245 mm spindle taper innen MK 4 table-size 180 mm table hole 95/75 mm strokes per minute 450 - 840 total power requirement 10 kW weight of the machine ca. 5200 kg dimensions of the machine ca. m Max. gear Æ (external) approx. 265 mm Isdpfet Hwruox Aaaetp Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 mm Table travel, cross, approx. 175 mm Number of strokes, infinitely variable 450 - 840 /min Feed range 0.09 - 0.6 mm/stroke Rotary feed, strokes per cutter revolution 2,722 - 681 Total electrical load 10 kW - 380 V - 50 Hz Weight 5,200 kg Accessories / Special Features * Selection switch for various working programmes, and for manual control. * Multi-cut device for roughing, finishing and sparkout, via presettable micrometer screws. * Hydraulic workpiece external clamping device mounted on table, for internal gears (a sort of collet chuck). * Separate switch cabinet. * Separate hydraulic unit. * Hydrostatic straight guide, with cooling aggregate for the hydrostatic pressure oil, separate. * Lateral table adjustment ensures optimal ram lift from workpiece. * Infinitely variable number of strokes via DC motor. * Built-on coolant device. * Presettable impulse counter for switching off table after every cut. With digital display. * Various change gears.

Condition: used, functionality: fully functional, power: 72 kW (97.89 HP), overall weight: 10,000 kg, Year of construction: 1999, operating hours: 13,000 h, Liebherr L514 Stereo wheel loader Year of manufacture: 1999 13,000 operating hours 72 kW diesel engine approx. 10,000 kg Itedpfx Aajw Tlzfjaep 20 km/h Fork + bucket Hydraulic quick coupler Transport dimensions: 6.90 x 2.49 x 3.10 m

Condition: good (used), Liebherr - Lorenz S800 Gear Hobbing Machine Ijdpfx Asw R Tykjaaotp -Well-maintained machine with comprehensive accessories -1x pallet of change gears -1x pallet of hobbing cutters -1x pallet of arbors -DOCUMENTATION -Max. workpiece length with counter support: 600 mm -Max. workpiece length with counter support retracted: 800 mm -Max. travel of the milling slide: 360 mm -Largest pitch machinable with largest workpiece: 5 Pi / in standard range: 8 Pi -Spindle taper - milling spindle: MT 5 -Arbors: 22/27/32/40 mm -Max. cutter diameter: 186 mm -Max. cutter length: 170 mm -Max. cutter shift: 80 mm -Cutter speeds: 40-220 rpm -Feed rates steplessly adjustable / horizontal -Feed rates steplessly adjustable / vertical -Feed rates steplessly adjustable / tangential -Clamping table without coolant rim: 550 mm -Clamping table bore: 100 mm -Clamping arbor taper: MT5 Dimensions: LxWxH 3.6 x 1.8 x 1.9 meters / Weight 5000 kg Subject to errors and input mistakes.

Condition: excellent (used), operation weight: 5,680 kg, Year of construction: 2020, Make Liebherr Model: KUD03355-080WJ18-001-000 Itjdpfx Aaet H Dzpjaep Year of manufacturing: 2020 Dimensions LxWxH (mm) 3600 x 300 Weight (kg) ca 5680 Total quantity in stock 3 Country of origin Germany Comments Outside diimension 3600mm, Outside ring 126 logs ( 85mm hard to hard), Inside ring 128 logs ( 80mm hard to hard)

Condition: ready for operation (used), Year of construction: 1995, A Liebherr PR 722 B bulldozer (crawler) is available. Engine type: Liebherr D 924 T-E, engine power: 97kW(132hp), displacement: 6.7l(6700cm³), max. speed: 11km/h, track width: 610mm, height above cab: 3100mm, transport dimensions X/Y/Z: approx. 3890mm/2410mm/3100mm, weight: approx. 15400kg, operating hours: 11884h. The right drive of the machine is leaking. Documentation available. On-site inspection is possible. Itsdpfouzlgwox Aaaop

Condition: good (used), Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5- K/500 -Working area: Ø max. 500 mm -Max. cutter diameter: 186 mm -Accessories: including extensive accessories see photos -Machine dimensions: 2300/1460/H1870 mm -Dimensions accessories: pallets 1420/1300/H300 / 1200/800/300 mm Isdpfx Aev Dtmmeaaotp -Weight: 5300 kg plus 535 kg accessories

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: Itodpfxet Hw R De Aaajp • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 2018, Field of application: Construction Bucket capacity: 5 m³ Technical condition: very good Visual appearance: very good Serial number: Eurosteel Delivery terms: EXW Please contact Christiaan Dekker for more information 5 cubic meter bucket • Make: Eurosteel , Dutch build • 5 teeth • Pin diameter: 120mm • Between ears: 600mm • Bucket comes from Liebherr 964C Price Euro. 5.500,- Itjdpfou U N Ddox Aaajp

Condition: good (used), Quick coupler system: Yes Technical condition: good Visual appearance: good Please contact Ferdinand Pater for more information Iodpjt Dlviefx Aaaotp

Condition: used, max. wheel diameter 1800 mm gear width 725 mm max. module 5 Control Siemens 840D sl axial travel 725 mm turning speed range - stepless 44 - 440 U/min cutter diameter max. 240 mm cutter width - max. 300 mm table diameter 1500 mm boring diameter 350 mm weight of the machine ca. 27 t dimensions of the machine ca. 8,8 x 6,1 x 3,25 m Equipment / Accessories: - max. distance from clamping table to counterholder/to center of milling spindle: 1045 mm - milling spindle: Isdpfxsvylirj Aaajtp - max. axis distance between milling spindle and clamping spindle with/without counterholder: 1200 mm - min. axis distance between milling spindle and clamping spindle with/without counterholder: 525 mm - quick cutter change device - chip extraction device - milling arbors - documentation

Year of construction: 1999, condition: ready for operation (used), Module size: 5mm, max. workpiece diameter: 180mm, axial travel: 400mm, shank travel: 200mm, milling cutter diameter: 150mm, tool speed: 2250rpm, table speed: 250rpm, max. tool clamping length for bore milling cutter/end milling cutter: 236mm/360mm, control: Liebherr PC-NC. Documentation available. On-site inspection is possible. Ijdpfx Aaovpviueaotp

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Equipment: hydraulics, We offer a hydraulic cylinder for the high-tip bucket of our sold wheel loader. Dimensions: Eye diameter: 70 mm Iodpswpffqefx Aaajtp Length retracted eye center to eye center: 860 mm Length extended eye center to eye center: 1240 mm Stroke: 390 mm

Condition: used, Year of construction: 1999, max. wheel diameter 280 mm gear width 330 mm max. module 5 min. module 1 Itjdpfx Aaot Hwu Asasp Control LIEBHERR CNC total power requirement 28 kW weight of the machine ca. 12 t dimensions of the machine ca. m

Condition: new, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Liebherr Likufix SW33 Adapter Plate / NEW / in stock & immediately available Price: €4,690.00 net / €5,581.10 gross Two bolt patterns available. Drawings of the bolt patterns can be found in the photos. - Likufix SW33 adapter plate is equipped with 4 connections - Also available from stock with a connector for the leakage oil line! Surcharge: €375.00 net - Excavator class: 8t – 20t - Weight: 160 kg Suitable for many attachments such as hydraulic hammers, sorting grapples, and the following Westtech products: Small bolt pattern: - Westtech CL190 - Westtech CL260 - Westtech C250 - Westtech G850 Large bolt pattern: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires leakage oil line) - Westtech CS580 (requires leakage oil line) - Westtech CS780 (requires leakage oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All matching Westtech products also in stock and immediately available! Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Mr. Herden will gladly assist you (by phone). Upon request, we will also be happy to provide you with a financing offer. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. Itsdjw N Aa Dspfx Aaaep We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted!

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1191, rotational speed (min.): 4,000 rpm, rotational speed (max.): 10,000 rpm, tool length: 210 mm, TECHNICAL DETAILS Largest workpiece diameter: 180 mm Module range: 1 - 5 Minimum number of millable teeth: 7 Milling head swivel angle: ±35° Resolution accuracy: 0.1 degrees Workpiece table load: 17 kN Tool data Infinitely variable tool speed range: 4,000 - 10,000 rpm Number of tool threads: 1 - 7 Tool diameter for generating grinding: max. 145 mm Tool diameter for form grinding: max. 175 mm Tool length: max. 210 mm Total tool travel in the V-axis: max. 200 mm Shift travel from machine center - plus (+) direction: max. 100 mm Shift travel from machine center - minus (-) direction: max. 100 mm MACHINE DETAILS Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Maximum rated current: 65 A Fuses in the supply line: 80 A Ambient temperature: +15 °C - +38 °C Relative humidity: max. 90% at 20 °C Relative humidity: max. 50% at 38 °C Operating noise: 80 dB(A) EQUIPMENT Itodswmb Amopfx Aaasp - With counterholder - No dresser - CBN wheels only

Condition: used, Year of construction: 1984, max. wheel diameter 1500 mm gear width 700 mm max. module 5 Control Liebherr LH90 smallest number of teeth to be hobbed 6 milling head: Motorfräskopf milling spindle speeds (infinitely variable) 44 - 440 U/min milling head -swivable +/- 45 ° table diameter 1100 mm max. table load 8000 kg total power requirement 66 kVA Equipment / Accessories: Iodpevvcgtsfx Aaaotp - chip extraction device - milling arbors - documentation

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm Diameter of the table 1500 mm max. module 22 Control 840D turning speeds 3,5 U/min table load capacity 20000 KG Distance of shafts 70...1220 mm Stroke length 30...330 mm no. of strokes 10...200 Hub/min total power requirement 138 kW weight of the machine ca. 38 t dimensions of the machine ca. 11x5 m machine: Full CNC machine with electronic rolling coupling for C- and D-axes and digital INDRAMAT drive technology. Stiff machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wraparound, longitudinal guide with roller recirculating shoes. Ground preloaded ball screw with play-free preloaded nut. Digital AC drive technology with play-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically play-free preloaded double worm gear, part wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic compensation of the workpiece weight. Table hole with a diameter of 500 mm through and open at the bottom. Water-cooled digital AC servo motors. The machine is to be installed on a foundation. Machine stand: as a highly rigid cast construction for axial travel of 1200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and wraparound with roller recirculating shoes. Ground ball screw with play-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shapping head: SK 4.1 with hydraulic NC servo drive for impact spindle movement and cutting wheel lifting, stroke length 330 mm, impact spindle diameter 160 mm. Hydrostatically supported impact spindle, linear guide and lateral guide for the lifting mechanism. Maximum tool diameter 300 mm. Drive motor power 30 kW. Stroke rates from 10 - 200 DH/min, stroke speed from 5 - 45 m/min. Impact spindle speed for working and return stroke independently programmable. In the cutting area, the spindle speed remains constant. Maximum cutting wheel speed 10 rpm, digital AC drive technology. Itedpfsv E R Eijx Aaasp Cutting wheel lifting correction for internal and external gearing manually reversible. Lateral offset of the impact spindle axis up to 50 mm from the machine center to prevent return stroke collision of the cutting wheel, manually adjustable.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you by phone. Liebherr Likufix SW48 Adapter Plate / NEW / in stock & immediately available Price: €5,690.00 net / €6,771.10 gross Two bolt patterns available. Drawings of the bolt patterns can be found in the photos. - Likufix SW48 adapter plate is equipped with 4 hydraulic connections - Also available from stock with a plug for the drain line! Additional charge: €375.00 net - Excavator class: 15t – 35t - Weight: 258 kg Suitable for many attachments such as hydraulic breakers, sorting grabs, and the following Westtech products: Small bolt pattern: - Westtech CL190 - Westtech CL260 - Westtech C250 - Westtech G850 Large bolt pattern: Itedpjw N Aawsfx Aaajp - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (drain line required) - Westtech CS580 (drain line required) - Westtech CS780 (drain line required) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All suitable Westtech products also in stock and immediately available! Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) available from stock and ready for immediate delivery. Mr. Herden (phone) will be happy to assist you. Upon request, we will also be pleased to provide you with a financing offer. We are an official sales and service partner for OilQuick, Holp, Gierking GMT, Weber MT, Westtech, DMS, Seppi M., Magni Telehandlers, JCB Construction Equipment, Mercedes-Benz, and Iveco. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. All information subject to change and prior sale.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0315, workpiece weight (max.): 15 kg, wheel diameter: 80 mm, milling length: 220 mm, workpiece length (max.): 450 mm, TECHNICAL DETAILS Max. workpiece diameter: 80 mm Workpiece weight: 15 kg Workpiece length: -50 mm - 450 mm Machining Max. nominal module for steel: 3 mm Max. milling stroke: 250 mm Max. shift travel: 180 mm Table diameter: 145 mm Table speed: 150 rpm Milling head swivel angle: ±45 degrees Cutter-workpiece center distance: 10 mm - 200 mm Milling unit Cutter diameter: 90 mm Cutter length: max. 220 mm Iodpfxewmbnpe Aaastp Cutter speeds: 1,000 rpm Milling spindle drive power: 15 / 23 kW Table drive power: 5.8 / 19.0 kW MACHINE DETAILS Weight of the machine with counterweight: 10,000 kg Total connected load: 25–35 kVA