Gear skiving machine

LIEBHERR LK 200

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,050 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, 3-Axis Machining Center Manufacturer: Bridgeport Model: VMC-1000 XP Year of manufacture: 10-2002 Control type: Heidenhain iTNC-530 Operating hours: n/a S/N: 82XXXX Technical Data: ----- - Travel X-Y-Z: 1,050 x 610 x 600 mm - Spindle: max. 8,000 rpm - Tool holder: SK40 - Tool magazine: 22 positions - Coolant system - Through-spindle coolant (IKZ) - Glass scales on all axes X-Y-Z - Central lubrication - Weight: approx. 4.2 t - Dimensions LxWxH: 3,000 x 2,350 x 2,400 mm Nwsdpew Nyfdefx Agzer Accessories: ----- - Manuals - Tool holder package Special features: ----- - Through-spindle coolant (IKZ) deactivated due to defective flow tube in spindle - Spindle replaced in 2023, few hours of operation, precise concentricity

Condition: good (used), Year of construction: 2004, TBT ML 200-2-800 deep hole drilling machine TECHNICAL DATA Type: ML 200-2-800 Year of construction: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drilling slide stroke: 800 mm Drilling range: 1 - 10 mm Process: Single-lip drill Drilling depth: Immersion spindle: 110 mm Seal housing: 430 mm Sealing housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 Voltage: 240 / 350 / 350 V Frequency: 100 - 800 Hz Weight: Approx. 2.6 T We assume no liability for the accuracy, completeness and up-to-dateness of the information provided Njdpfxsvcbg So Agzswr

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 40 mm arm length 1.000 mm workpiece height max. 1.250 mm table-size 1.150 x 690 mm spindle taper MT 4 spindle turning speed range 40 - 1.400 U/min feed range 0,08 - 0,40 mm/min crossrail adjustment horizontal 800 mm crossrail adjustment vertical 700 mm spindle stroke 220 mm power requirement 3,5 kW voltage 380 V total power requirement 4,0 kW weight of the machine ca. 1,6 t - Serial-No.: A01/446/97 Nedsl Ha Twspfx Agzowr - adjustable cube table 600 x 500 x 500 mm - coolant device - machine light

Year of construction: 2021, condition: new, type: gas-fired with central recuperator max. temperature: 1300°C max. furnace output: approx. 700 kg/h clear door opening (w x h): 600 x 400 mm number of burners: 6 number of control areas: 3 heating capacity: 720 kW el. total connected load: approx. 15 kVA PLC: Siemens S7 Nwedpsg E S Inofx Agzor

Year of construction: 1990, condition: excellent (used), Equipment The machine can be upgraded with new software and control system according to customer requirements. Measuring range X = 850 mm Y = 1200 mm Nwedpfjff Eakjx Agzor Z = 600 mm Measurement accuracy 2,5µ + L/250 Price: on request! We would be happy to provide you with a detailed offer! Please note: Our offer is directed exclusively to professional customers. (Changes and errors in the technical data, information and prices as well as prior sale reserved)

Condition: new, We have different electronic parts for DMG machines, BOSCH,Siemens .... Nedpfxoddxv Uo Agzswr On Your request I will send detailed photos of all parts.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 5,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/5M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, technical inspection anytime after appointment Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 1800 mm height: 1800 mm total weight: 7300 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers Njdpfxowk Iq Ej Agzewr - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: used, Year of construction: 1967, functionality: fully functional, table width: 1,000 mm, table length: 810 mm, overall weight: 11,000 kg, workpiece weight (max.): 1,200 kg, spindle speed (max.): 1,600 rpm, spindle speed (min.): 32 rpm, spindle diameter: 120 mm, space requirement height: 2,475 mm, space requirement length: 3,970 mm, space requirement width: 2,230 mm, Equipment: rotational speed infinitely variable, - Maximum power consumption: 14 kW - Rated spindle power: 8 kW - Spindle drive power: 8 HP - Control voltage: 110 V - Table rotation continuously 360 degrees in both directions - Transverse table stroke (X-axis): 760 (+20) mm - Longitudinal table stroke (Z-axis): 760 (+20) mm - Vertical headstock stroke (Y-axis), min. and max. height of the spindle axis above the table: 50-710 (+20) mm - Rapid traverse: 2 m/min - 9 adjustable feed rates: 0.04 - 0.6 mm/rev - Hydraulically continuously adjustable working feed rates in manual mode (strokes): 0 - 3000 mm/min - Optical reading accuracy: linear axes 0.001 mm / manual rotary axis 1 sec. arc - Positioning referenced Accuracy on the built-in scales: ± 0.0015 mm / ± 2 sec. arc - With central lubrication of the guideways Nwodpjwdwqnsfx Agzsr - Internal spindle: ISA No. 40 steep taper with Dixi bayonet, diameter 75 mm - Extras: Various tool holders, accessories, and operating instructions are included.

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm 48 St. tool taper SK50 daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t Nodpfsu I E Emex Agzjwr required space 16,8 x 10,3 x 7,9 m

Condition: excellent (used), Year of construction: 1997, grinding diameter 80 - 250 mm grinding length 600 mm centre height 175 mm longitudinal feed 750 mm workpiece turning speeds 6 - 600 U/min Nodpfx Asu D I Tlegzowr grinding spindle speed 1500 - 3600 U/min cross movement - autom. and by hand 320 mm Control Kelco 80 total power requirement kW weight of the machine ca. 4,4 t dimensions of the machine ca. 3,1 x 2,1 x 2,0 m