Used Linhai 500 for sale (15,894)

Condition: used, mileage: 493,082 km, power: 205 kW (278.72 HP), first registration: 03/2005, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,300 mm, loading space length: 2,760 mm, loading space height: 400 mm, total length: 6,300 mm, total width: 2,300 mm, total height: 3,400 mm, Equipment: air conditioning, all wheel drive, crane, soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Unimog U500 3-way tipper + Crane K 9501 (Vehicle 405) First registration: 16.08.2023 Mileage: 13,983 km Operating hours: 13,983 Engine capacity: 6374 ccm Power: 205 kW / 280 hp Engine: 6 cylinders Permissible gross vehicle weight: 15,000 kg, unladen weight: 9,100 kg, payload: 4,900 kg Overall length: 6,300 mm x overall width: 2,300 mm x overall height: 3,400 mm 2 x rotating beacon, 2 x signal horn, 2 x long-range headlights + 2 x work lights on roof structure Municipal hydraulics with 3 valves on the left and right sides at the front, non-pressurized return line at the front PTO at the front Mounting plate with towing hook at the front Snowplow control prepared 1 pair of standard lights + 1 pair of work lights on the A-pillar Leaf spring suspension 4x4 all-wheel drive Crane Palfinger PK 9501, manufactured in 2004, with 2 x hydraulic outriggers, series S-106-SK-A, Mpa 30.0 with 3 x hydraulic extension Crane control from below + remote control Rear-view camera 2 x LED reversing lights Trailer coupling Rockinger Tipping platform (3-way tipper) L: 2,760 mm x W: 2,300 mm x H: 400 mm, 6 x lashing eyes recessed in the tipping platform Tires 385/65R22.5, front approximately 40%, rear approximately 80/80% Air connections in red and yellow at the rear 3 x valves at the rear for hydraulics Iiedpfez Rkr Uox Ap Djh 1+2 seat configuration Telligent M/A with folding clutch 2 x electric windows, 2 x electric mirrors + mirror heating Joystick control Hands-free phone system prepared Heated driver's seat Axle locks front and rear Headlight range adjustment Radio/CD Reinforced engine brake Rear-view camera with monitor Price: € 35,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the Ludwigslust District Court; for disputes exceeding this amount, it is the Schwerin Regional Court. Subject to errors, typos, and prior sale.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, controller manufacturer: MITSUBISHI, controller model: M-730UM, number of axes: 3, This 3-axis DMG MORI NLX1500MC/500 was manufactured in 2015. It features a spindle output of 11/7.5 kW and a maximum spindle speed of 6,000 min-1. The machine is equipped with a 12-station turret and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX1500MC/500 horizontal turning machine we have for sale. Contact us for further details. - Operation Panel Type: ERGOLINE TOUCH (21.5 + 15.6)- Customer Factory Voltage: 380 V- Frequency: 50 Hz- Nominal Bed Length: 500 mm- Spindle 1 Output: 11 / 7.5 kW- Spindle 1 Speed: 6,000 min-1- Spindle 1 Through-Spindle Hole Diameter: 61 mm- Spindle 1 Chuck Type: Hollow Chuck (6")- Spindle 1 Chuck Manufacturer: Kitagawa- Spindle 1 Chuck Cylinder Stroke Check: Stroke end detection- Turret 1 Type: 12 Stations- Turret 1 Milling Function: Provided- Turret 1 Rotary Tool Spindle Output: 5.5 (3 min) / 3.7 kW- Turret 1 Rotary Tool Spindle Speed: 10,000 min-1- Turret 1 Rotary Tool Spindle Torque: 29 N·m (3 min) / 14 N·m- Turret 1 Tool Mounting Method: By bolts- Turret 1 Overhang of O.D. Cutting Rotary Tool: 100 mm (Y-axis stroke control)- Tailstock: Provided (Programmable Z-axis travel type)- Tailstock Spindle: Live Center MT4- Chip Conveyor: Provided (Right disposal type, Hinge)- Coolant System: High-pressure (635 W / 1040 W), Water-soluble coolant Isdpjz Dt D Ejfx Ap Doih Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Technical details: welding current: 500 A Length: 590 mm Isdpfez Dt Tgox Ap Dsih height: 430 mm connection voltage: 400 V open-circuit voltage: 65 V capacity in kVA: 20,1 KvA protection class: IP23S weight of the machine approx.: 85 kg dimensions L x W x H: 0,60 x 0,44 x 0,44 m Kemppi FastMig KM 500 – MIG/MAG Welding Power Source The Kemppi FastMig KM 500 is a powerful industrial MIG/MAG welding power source designed for professional welding applications in metal fabrication, mechanical engineering, production and maintenance. With a maximum welding current of approximately 500 A, the KM 500 is particularly suitable for demanding welding work and applications requiring high welding performance and a high duty cycle. The power source is designed as part of the modular Kemppi FastMig system and can be combined with suitable Kemppi wire feeding units, such as the FastMig MSF series. The modular design allows the power source and wire feeder to be positioned separately, making the system suitable for both workshop use and larger workpieces. Typical applications: steel construction, mechanical engineering, heavy fabrication, repair and maintenance, production welding and general industrial MIG/MAG welding. *

Condition: new, SCM Olimpic 500 HT - Automatic edge banding machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control console (control panel) - Human-machine interface (HMI) software "Maestro active edge" - Fine trimming and radius cutter head, radius = 1 mm - Fine trimming and radius cutter head, radius = 2 mm - Electronic positioning of the upper pressure bar - Spacers on the infeed guide rail - "SAVENERGY" kit - Interior lighting of the machine housing and the edge banding area - "Nesting" contact rollers - "AAR" 1 release agent spray unit - Spray unit for final finishing of the edge - Spray unit for sensitive edges - Joining unit "RT-V1" - "EASY SIZE" device Iiodpjzgf Idsfx Ap Djh - Gluing unit "VC-VM" - Ceramic lamp with infrared radiation - Electronic positioning of the pressure rollers - Trimming unit "K-2 Radius" - Chamfer and radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit, 3 automatic positions straight/R/R, for "Round 2-A" - Radius cutter head "RAS-HP Multiedge 2R" - Planing cutter "RC-N" - Buffing unit "SP-V" Machine is new and still in its original packaging. Commissioning possible in Germany and Austria. Currently, a subsidy of 15% is possible in Germany; we will be happy to assist you with this. Special offer machine at a special price.

Year of construction: 1990, condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40 Spring, summer, autumn, and winter – your products must be able to withstand different temperatures during manufacturing, transport, storage, and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function, and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Iisdoh Izh Iepfx Ap Deh Designation: WT 11-18 Type: Temperature test chamber Test chamber volume: 500 liters Temperature range: -40°C to +180°C External dimensions: 110 cm wide, 173 cm deep, and 204 cm high Internal dimensions: 80 cm wide, 85 cm deep, and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Condition: used Complete factory closure, large selection of storage platforms, pallet racks, shelving systems, paternosters. High-quality industrial machines, lathes, grinding machines, hand tools. You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2001, Laser marking system Fab. Baublys Typ. BL 150 S/NC 500 Year 2001 Technical data Manufacturer: Baublys Type: BL 150 S/NC 500 Year of manufacture: 2001 Laser: 150 Watt Laser type Q-switch pulsed solid-state laser Laser medium Nd:YAG Wavelength 1064 nm Beam diameter approx. 1.2 - 1.3 mm after decoupling mirror at TEM00 Beam divergence 5 mrad TEM00 Pulse duration (time) CW / 90 ns Max. Output power 65 W multimode 16 W single mode Pulse energy 16 mJ at 3 kHz Beam deflection system Galvanometer system Line thickness with mixed mode approx. 0.12 mm Deflection speed 3 m/s; this corresponds to 200 characters/s at a height of 1.5 mm and a single-line font Dimension: approx. Weight: approx. Power supply Voltage 400 V, three-phase current 50 Hz, 3 phases, clockwise rotating field Connection 5-pin CEE plug 16 A 6h Iedpfx Ajq Abnnsp Djih Max. Power consumption 8.5 kW, max. 16 A per phase Fuse protection 3 x 16 A slow-blow Water connection Cooling water flow rate 7.5 l/min at 20°C flow temperature Connection thread to be discharged G 3/4" external thread Heat quantity approx. 6.5 kW Max. Cooling water temperature at inlet 20°C Water consumption dependent on inlet temperature Outlet temperature < = 35°C Ambient conditions for transportation and storage Temperature +5°C to +40°C Humidity < 70% Installation site Observe transport instructions Ambient conditions for operation Temperature +10°C to +40°C Humidity < 70% Installation location Observe transport instructions All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: excellent (used), Touch panel Space requirements: Width: 600 mm Depth: 500 mm Iijdpfjg Af U Eox Ap Dsh Height: 90 mm

Year of construction: 2020, condition: like new (used), Tapered rollers 550mm for log transport solid construction, good condition 2 pieces available roller length: 800 mm Ijdpfx Apjgvvvls Djih roller diameter: 400 mm shaft diameter: 45 mm 2 stationary bearings INA Sprocket: z= 25, zt=30, diameter: approx. 280 mm

Condition: used, mileage: 422,000 km, power: 368 kW (500.34 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 8x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: crane, Crane Number of hydraulic extensions: 8 Number of manual extensions: 2 Remote control: ✓ = More information = Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Steering Crane: Palfinger PK 54000, year of manufacture 1999 Iodsz N Hnpopfx Ap Djih = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: new, Saw blade extending upwards, up to D 500mm Tilting of the saw unit to the right and left up to 20° Rapid positioning of the saw unit to pre-defined angular positions (135°, 90°, 45°) Iisdpfez R Daxox Ap Deh Positioning in intermediate angular positions via pneumatic locking Adjustable feed rate, feed controlled hydropneumatically Pneumatically operated integrated safety device with complete coverage of the sawing area Fog spray device Workpiece clamping by a pair of pneumatically operated horizontal and vertical clamping cylinders Preparation for connecting a dust extraction system 3kW, 400V, 50Hz Possible options: Infeed roller conveyor Measuring device, manual or motorized Digital display Laser device for displaying the cutting line Minimum quantity lubrication system Dust extraction system

Condition: repair required (used), functionality: not functional, Walter HMC 500 WWM 5-axis tool grinding machine, damaged. A-axis: 750mm Iedpfx Ajz E Rcbep Doih X-axis: 290mm Y-axis: 320mm Z-axis: 660mm Tool diameter: 200mm Error code shown in the picture.

Condition: good (used), Year of construction: 1986, Grinding depth: 500 mm Internal diameter: 20...400 mm Workpiece spindle speed: 40...400 rpm Table speed: 0.1...8 m/min Isdpfx Apsz Rn R Uj Doih Rapid traverse: 10 m/min Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: grindable diameter within the workpiece guard: internal: 20..400 mm; external: 500 mm max. workpiece diameter within the workpiece guard: 500 mm max. grinding depth: 315 mm grindable taper angle: 60° Internal grinding spindle speeds: 2640...16500 rpm Drive power for surface grinding unit: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Table travel: 630 mm max. distance from the workpiece spindle flange to the grinding spindle support: 1250 mm

Condition: new, machine/vehicle number: 20260503002, fuel type: diesel, motor manufacturer: Cummins 6ZTAA13-G4, General information Year of manufacture: 2026 Field of application: Construction Ijdpfx Asz Nu Eisp Dsih Weights Empty weight: 4.830 kg Functional Generator capacity: 500 kVA Dimensions of cargo space: 425 x 160 x 240 cm CE mark: yes Other information Fuel consumption: 70.4 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A44J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 800 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, mileage: 359,865 km, power: 368 kW (500.34 HP), first registration: 08/2022, tire size: 315/70 R22.5, axle configuration: 4x2, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, second fuel tank, spoiler, trailer coupling, = Additional Options and Accessories = - CD player - Roof spoiler - Spare key - Speed limiter - Aluminum fuel tank - Alloy wheels - Headlights - Stability control - Standard air conditioning - Sun visor - Alternating current - Tool kit - Xenon headlights Iedpfx Apezgk Szs Dsih = Additional Information = General Information Year of manufacture: 2022 Cab: Globetrotter Axle Configuration Tire size: 315/70 R22.5 Axle brand: Anders Brakes: Disc brakes Front axle: Steered; Tire tread depth left: 11 mm; Tire tread depth right: 11 mm; Suspension: Leaf spring suspension Rear axle: Double tires; Tire tread depth left inner: 8 mm; Tire tread depth left outer: 9 mm; Tire tread depth right inner: 6 mm; Tire tread depth right outer: 6 mm; Suspension: Air suspension Weights Unladen weight: 7,738 kg Payload: 11,262 kg GVW: 19,000 kg Condition Damage: None

Condition: excellent (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. control Memory-Funktion Weinig Powermat 500 with grooved table ----- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ----- Technical Data: Iiodpfx Apezughzj Djh Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool circle: 125-180 mm Tool circle for rebate cutter: 130-160 mm Travel Axial: 17 mm Folding attachment MarathonCoatin for table insert in front of 1st lower tool holder 2nd Spindle - right ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. groove depth: 35 mm Axially travel: 80 mm Radial travel: Min. tool diameter at stop level: 93 mm Max. tool diameter behind stop level: 200 mm 3rd Spindle - left ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads: max. 163 mm Max. Groove depth: 35 mm Axially travel: 55 mm Pressure shoe in front of left spindle, including 2 lateral pressure rollers, spring-loaded Spindle radially CNC-controlled 4th Spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Maximum tool swing diameter for straight cutter heads: 180 mm Maximum groove depth: 35 mm Axially travel: 40 mm Spindle radially CNC-controlled Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. 5. Spindle - Lower ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 225 mm Max. throat depth: 15 mm Axially travel: 35 mm Radial travel: Min. tool diameter to table level: 93 mm Max. tool diameter 6 mm below table level: 225 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Feed roller adjustment travel relative to the left tool holder, axial 35 mm Reduced roller spacing relative to the right tool Machine electrical system ----- Operating voltage 400 V (voltage range 380 - 420 V), 50 Hz. Machine stand, tables, and stops ----- Infeed table: 2500 mm long (including jointing guide) Slotted guide for short or difficult-to-guide workpieces, coated...

Condition: used, mileage: 199,989 km, power: 100 kW (135.96 HP), first registration: 04/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 3,300 mm, loading space width: 2,050 mm, loading space height: 1,950 mm, Equipment: ABS, central locking, electronic stability program (ESP), tail-lift, 3-seater, automatic transmission, tachometer, power steering, electric windows, on-board computer, electric exterior mirrors, center armrest, twin tires, cruise control, wing doors, side door/right, large D-Hollandia tail lift with 750 kg payload, Carrier Xarios 500 refrigeration unit, side protection, power connection, standby and in-transit cooling, etc. Errors and prior sale are subject to change. For sale only to commercial businesses and for export. Test drive/inspection at TÜV Dekra or Iveco is possible! A new TÜV certificate can be provided upon request! All documents can be sent in advance via email or WhatsApp to check mileage, accident history, vehicle history, etc.! WhatsApp available! Iisdpfxezwid Rj Ap Doh !!!! Fg-8662 !!!! Key number 166 !!!!!

Condition: used, mileage: 290,000 km, power: 96 kW (130.52 HP), first registration: 12/2014, fuel type: diesel, overall weight: 3,300 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 2,900 mm, loading space width: 1,900 mm, loading space height: 2,050 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, 3-seater, power steering, driver airbag, 6-speed manual transmission, tachometer, power steering, electric windows, onboard computer, electric exterior mirrors, center armrest, gullwing doors, central locking + remote control, power outlet, Carrier Xarios 500 refrigeration unit, unladen weight: 2300 kg, payload: 1000 kg, etc. Errors and prior sale excepted. Iedpfx Ajy Upb Tjp Doih For sale only to businesses and for export. !!!! Fg-5074 !!!! Key number 128 !!!!!

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display Iisdpfx Apovu Hd Te Deh - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: used, This listing is for the Gilson PIPETMAN P5000 500-5000uL Single Channel Pipette. Colour-code Purple Ijdpfx Apsxv Dqpj Dsih The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Condition: excellent (used), Year of construction: 2006, Esta Eurosog W/H 80.299 industrial vacuum cleaner As a powerful industrial vacuum cleaner, the EUROSOG-W is suitable for coarse, dry, fine, and free-flowing dust. The AC version is designed for occasional use in cleaning work in workshops. Its smooth-running wheels provide the industrial vacuum cleaner with high mobility. The spacious dust collection container has a capacity of 80 liters. Thanks to the patented tilting device, the dust can be disposed of effortlessly. Application areas for the EUROSOG industrial vacuum cleaners: AC version for occasional use For dry, coarse, and fine dust For cleaning machining tools For general cleaning work (e.g., workshop floors) Can be used in many industries (e.g., wood and metal industry) Metal industry Construction industry Wood industry Chemical industry Printing industry Flock industry Cleaning industry Craft trades Automotive industry Mechanical engineering Stone industry Paper industry Tobacco industry and many more Isdpoivdt Eofx Ap Deih Your benefits at a glance: Powerful industrial vacuum cleaner for dry dust Compact design Easy disposal of the dust collection bag Special features of the EUROSOG-W series: Manual brush cleaning Washable permanent filter cartridges, available for dust classes M and H Optionally available with M and H test certificates Patented, tilting filter housing Manufacturer: ESTA Absaugtechnik Type: Eurosog W/H 80.299 with TÜV test certificate, dust class "H" Vmax: 360 m³/h Vmin: 815 m³/h pumax: 180 mbar Filter area: 5 m² Max. air volume flow: up to 500 m³/h 230 V Year of manufacture: 2006 Item weight: 81.00 kg RRP: €4900.00 You can find more industrial vacuum cleaners in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Klöckner-Moeller Busbar System BD O-100 A Klöckner-Moeller Busbar System Ijdouzhxpjpfx Ap Deih BD O-100 A 500 V Busbar, 160 cm 120 pieces 192 meters You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Micrometer, caliper type Length: 475 - 500 mm Iiodjby Rggspfx Ap Deh in a wooden case

Year of construction: 1999, condition: excellent (used), SICA-TRK-SY.U 25-160 PIPE SAW for LD-PE and HD-PE PIPES CHIPLESS CUTTING With central clamps with for all diameters Minimum diameter 25 mm Max diameter 160 mm Year of construction 1999 Status: Very good, in working order Machine locations: Iisdpfem E Nqyjx Ap Dsh Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 The machine is my property.

Condition: good (used), Year of construction: 2004, Stedler SAM-BA-MAT E 500 Shrink Wrapping Machine, AM-BA-MAT E 500 Shrink Wrapping Machine Functional Description The machine is used for individually or collectively wrapping packages with polyethylene shrink film. * Operating principle: Semi-automatic and pneumatic. * Process: The product is manually fed in via a format slide; all subsequent steps (banding, further transport into the shrink tunnel) are carried out automatically. * Sealing process: A continuously heated safety sealing device separates and seals the film. A Teflon cloth prevents the film from sticking to the sealing blade. Placing the film rolls * Positioning: The rolls are placed on pairs of support rollers, both above and below. * Adjustment: Adjustment rings limit the film laterally with an allowance of approximately 1–2 mm (adjustment using an Allen key). * Preparation: The film ends are guided through the sealing device. By pushing the infeed carriage forward and backward once, the separating sealing process is pneumatically initiated, creating the so-called film curtain. * Film material: Processes two rolls of flat shrink film made of polyethylene. * Film thickness: The recommended standard thickness is 40 µm (micrometers). * Film alignment: The rolls are fixed with adjustment rings, with a lateral play of 1–2 mm to be set. * Film width: The maximum width is 210 mm. * Control: The machine operates pneumatically and is activated via a manual slide. Machine data Manufacturer: Stedler Type: SAM-BA-MAT E 500 Operating voltage: 230 V Connection value: 0.75 kW Operating principle: Semi-automatic and pneumatic [Image content] Dimensions (L x W x H): 1500 x 1170 x 1300 mm Year of manufacture: 2004 Sealing & Film specifications Iedjtzbkkspfx Ap Dsih Maximum temperature: 250 °C Sealing readiness: approx. 1.5 s Film material: Flat shrink film made of polyethylene (PE) [Image content] Film width: up to 210 mm Film thickness: 40 µm (micrometers) More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), Interroll roller conveyor with 24 V drive The 24 V roller conveyor enables pressure-free transport of individual items with the aid of a control system. Each zone is driven by a RollerDrive, which is connected to a fixed number of idler rollers via PolyVee belts. Interroll Roller conveyor Length: 1700 mm Roller length: approx. 490 mm Roller diameter: approx. 50 mm Roller material: Steel, galvanized Iedpfstzbwdox Ap Dsih Roller type: Interroll Series 1100 easy-running conveyor roller Drive roll drum motor drive roller Voltage: 24 V Current: 1.10 A Gear ratio: 36:1 Number of rollers: 13 Height: 800 mm Side guide 2 supports, height-adjustable More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!