Used Loewer Discmaster Sf 2/2 - 1500 for sale (25)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, The DiscMaster SF is equipped with oscillating disc stations from above and below for the simultaneous processing of two workpiece sides in one pass. The disc tools with flexible sanding flaps rotate and oscillate across the workpiece. This means that all internal and external contours are processed uniformly through 360°, regardless of the orientation of the contour. Loewer DiscMaster SF 2/2 - 1500 deburring machine (2020) Manufacturer: Loewer Type: DiscMaster SF 2/2 - 1500 Dcjdpfxoxnnfbo Ah Ujp Year of manufacture: 2020 Condition: very good, used max. sanding height : 80 mm max. workpiece width : 1500mm Disc motor - rated power : 4 x 2,2 kW disc motor - speed : 1.000 min-1 feed adjustment motor - rated power : 2 x 0.37 kW Height adjustment motor : 0,75kW Oscillation motor : 4 x 0.75 kW Operating voltage : 400 V Frequency : 50 Hz On-site fuse protection : 40 A Extraction connection dimension : 2 x 180 mm Air requirement : 5,500 m3 / h Minimum air speed at the machine connection : 30 m / s Negative pressure at the extraction connection : 2,750 Pa Operating pressure : 6 - 8 bar Length : 1,950 mm Width : 2,150 mm Height : 2,000 mm Weight: 3,400 kg Options: - Transport table infeed - Transport table outfeed - Sensor strip for even tool wear. Detection of the machine's occupancy and display at the infeed of the preferred loading position. Scope of delivery: - Documentation

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, working width: 300 mm, sheet thickness (max.): 150 mm, pass-through width: 300 mm, nominal power: 7.5 kW (10.20 HP), LÖWER SmartGrinder SG 300 K Wet Grinding Machine for Grinding or Deburring Metal - 1 contact roller unit with height adjustment via gear and handwheel - Workpiece thickness: 0.5 - 150 mm - Abrasive belt size: 300 x 3000 mm - Additional conveyor belt: 300 x 3040 mm, profile spacing 240 mm - Additional conveyor belt: 300 x 3040 mm, profile spacing approx. 505 mm (6 sections) - Drive motor: 7.5 kW - Ammeter for performance display - Infinitely variable feed speed via conveyor belt: 2 - 9 m/min - Digital counter with zero reset (instead of absolute counter) - Upper tank with drain opening D = 120 mm - Two jet water nozzles, completely piped - Rubber-coated and grooved contact roller, 150 mm diameter - Contact roller hardness: 65° Shore - Additional HT grinding wheel, roller grit 120 - Infinitely variable abrasive belt speed: 7.5 - 22 m/s, adjustable via frequency converter and potentiometer for matching cutting speed during deburring or finishing - Grooved rolls for abrasive and conveyor belts - Height adjustment via handwheel, with digital display - Manual paper band filter with perforated sheet filter carrier above the settling tank. Includes holder, reel, and fleece roll. The filter fleece must be advanced manually. - Infeed guard with emergency stop - Additional rubber-coated pressure roller - Pneumatic belt tensioning - Rubber-coated spring-mounted pressure rollers, height and distance adjustable - Settling tank with matching pump - Dimensions (L x W x H): 1700 x 900 x 2400 mm - Weight: 685 kg - Operating voltage: 400 V, 50 Hz, 3-phase - Operating pressure: 6-8 bar - CE compliant Various VSM grinding fleece (100/180/240), approx. 3 pieces each at €153.00 each Various VSM zirconia alumina (80/120/240), approx. 15 pieces each at €16.35 each The machine has barely been used (only once in 2025!) and is in like-new condition! Absolutely WITHOUT defects Dcsdjxbpt Hepfx Ah Uop Original price over €29,000 + VAT

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm Dodpfx Aovnv Tqoh Uecp - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: good (used), functionality: fully functional, Corner press for mini finger joints Dcedoxch Hnopfx Ah Usp

Condition: good (used), Year of construction: 2012, 1 used deburring and edge rounding machine Manufacturer: Loewer Type: Cross Master DD 300 Year of manufacture: 2012 Working width: 300 mm Disc motors: 2×1.5 kW, 750 rpm Disc diameter: 400 mm Workpiece thickness: 0.3 to 100 mm Infinitely variable feed speed: 1 to 6 m/min Infinitely variable speed control (optional): 300-1100 rpm Extraction connection: 150 mm Machine dimensions (LxWxH): 1,600 x 1,800 x 1,700 mm Djdpjw Imucjfx Ah Ujcp

Condition: good (used), Year of construction: 2000, * Manufacturer: LÖWER * Machine No.: 10068 * Year of manufacture: 2000 * Type: KFM (see manufacturer's brochure) * Weight: 220 kg * Full load current: 18 A * Connection: 3~ three-phase, 400 V, 50 Hz * Protection: on-site protection 25 A The machine was used in our production facility until the end of operations, always running reliably and without issues. Dcedpfx Ahjw N Sh Ds Uop The balls have been replaced. The machine is ready for use and shows minimal signs of wear. Technical specifications can be found in the attached PDF. Collection from 41334 Nettetal.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 11055, Löwer DiscMaster Compact DM2DBECO Grinding Machine (Year of Manufacture 2008) Description: Used deburring and intermediate sanding machine “DiscMaster Compact” by Löwer, suitable for high-precision edge rounding, finishing sanding, and deburring of wooden parts. The machine is equipped with a disc station featuring sanding discs, spiral rollers, and pressure rollers. Condition & Equipment: Multiple sanding units are installed, brushes and discs are present (see photos) Conveyor belt with wear on the belt – should be replaced Machine is currently stored, professionally dismantled, and free of distortion Location & Delivery: Dedpfx Ahow Nbtcj Uocp Location: 91550 Dinkelsbühl Incoterms: EXW Dinkelsbühl (loaded at yard) – Collection, transport, and insurance to be arranged by the buyer Legal Notice: Sale without warranty Only for commercial customers

Condition: used, Year of construction: 1984, second hand Make Löwer Type ZA 3000 Year of construction 1984 Machine no. 5485 Motor 1.5 kW motorized brakes Number of spindles 2 x vertical saw, horizontal milling cutter Clamping height 200 mm Diameter 40 mm Cross-cut saw Table size 800 mm x 350 mm Rotatable stop Stop ruler 2000 mm, Festo LAS stop system Manual workpiece clamping Extraction connection 120 mm Required space approx. 1700 mm x 1700 mm x 1600 mm Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition, as viewed, without overhaul, without guarantee and warranty Dsdpjvwf I Aofx Ah Uecp

Condition: new, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (L/W/H) 3065x1600x1900 mm weight of the machine ca. 1500 kg LÖWER Leistomat SD ----- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By the It is possible to immerse the aggregates deeper into the profiles to be able to deliver. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter for adjusting the grinding intensity using frequency converters (separate for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fastener for Grinding wheels (wood pulp) - Feed via three lower and one upper conveyor belts and Spring-loaded pressure rollers with infinitely variable speed 4-15m/min - Parameters that can be set using the touch panel are workpiece thickness, Workpiece width (left side units individually), immersion depth Side units, spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and the Profile shape (workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic Clamping of the workpiece and feeding in after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (case) x width x height (mm): 3065x 1600 x 1900 Complete length: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Dcodpfxjvnv Uhj Ah Uop Set of replacement slats for Leistomat SD-200 consisting of Area aggregates: 30 strips EH45 / 200 - 7 (rolls) 30 strips EH45 / 200 - 20 (rolls) Folding units: 96 strips M55 / 120 - 4 SmartFlex slat disc Ø200 solid with 30 grooves 50mm long Set of replacement slats for SmartFlex slat disc consisting of 60 strip M35 / 50 K 180-7 p Sandpaper disc VB for soft disc D=200mm grit 220 with velor backing (Velcro), pack of 100. Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. ----- Price of the above-mentioned special accessories on request! -----...

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 2788, Crosscut saw diam. 300 mm Milling spindle diam. 40 mm sliding table with Festo length stop suction nozzle saw 120 mm dto.cutter 140 mm Dedeiau I Sepfx Ah Uecp cable + plug 16 Amp, without operating tool Unfortunately, we can not answer inquiries without complete contact information.

Condition: not inspected (used), Sanding belt length 2280 mm Sanding belt width 140 mm Motor 2.2 kW Table length 1000 mm Circular grinding device Extraction fan Dcodjvrzclspfx Ah Ujp Transport device

Condition: used, Year of construction: 1983, incl. new feeder beltusedmanufactured by Löwertype RSM 280 SXbuilt in 1983Masch.-No. 5245number of aggregates 1 piecemotor 5,5 kWsanding width ca. 190 mmsanding height ca. 120 mm3 feed speeds 6 / 11 / 16 m/t length ca. 1600 mmbelt width ca. 200 mmheight indicator gauge analogcombined aggregates roll/padfixed sanding pad1-beltstrip blowing deviceexhaust connection D 100 mmrequired space ca. 1300 mm x 800 mm x 1700 mmweight ca. 550 kgtotal connected power ca. 6,5 kWlocated in 97447 Gerolzhofen, free on truck, unverpacktsale in current condition as seen,without revision,without guarantee and Gewährleistung Dodjvwf Nyepfx Ah Uocp

Condition: used, Year of construction: 1975, with new feed carpet, not installed second hand Make Löwer Type RSM 280 S Year of construction 1975 Machine no. 3528 Number of belt units 1 piece Engines 5.5 hp Sanding width approx. 140 / 150 mm Grinding height approx. 120 mm band oscillation tape blow-off Feed speed 6 / 11 / 16 m/min. Band length approx. 1600 mm Band width approx. 160 mm Extraction connection D 100 mm Space requirement approx. LxWxH mm 1400x1000x1600 Weight approx. 650 kg Dsdjvwgczopfx Ah Uscp Storage location 97447 Gerolzhofen Handover in the current condition as seen without guarantee and guarantee - free loaded -

Year of construction: 2015, condition: used, machine/vehicle number: 12162, Technical data: - Manufacturer: Löwer - Type: DM 3DBB 400 - Year of manufacture: 2015 - Max. brush width: 1,350 mm - Max. brush diameter: 400 mm - Max. working height: 100 mm - Brush motor – rated power: 2 × 2.5 kW - Brush motor speed: 1,410 rpm - Feed motor – rated power: 1.5 kW - Feed motor – speed: 935 rpm - Disc motor – rated power: 2 × 1.5 kW - Disc motor speed: 1,410 rpm - Disc speed: 50–350 rpm - Vacuum motor – rated power 7.5 kW - Vacuum motor – speed 2,800 rpm - Height adjustment motor – rated power: 0.45 kW - Height adjustment motor – speed 1,410 rpm - Brush speed 30–350 rpm - Feed speed 3–15 m/min. - Weight: 1900 kg 2.5 ELECTRICAL CONNECTION - Operating voltage 400 V - Frequency 50 Hz - Fuse provided by customer 63 A - Full load current: 47 A - The cross-section of the supply cable must be at least AWG 2 (25 mm²). Dcsdjxqf I Eopfx Ah Uop 2.6 PNEUMATIC CONNECTION - Operating pressure 6–8 bar - Maximum pressure 8 bar 2.7 EXHAUST CONNECTION - Connection size 4 x Ø = 140 mm - Air requirement 1,108 m³/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Negative pressure at the extraction connection 1,180 Pa For blowing device: - Connection size 3 × Ø = 80 mm - Air requirement 390 m³/h per connection - Minimum air speed at the connection on the machine 20 m/s - Negative pressure at the suction connection 950 Pa - Vacuum outlet 1 × Ø = 200 mm, 300 m³/h

Condition: used, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds Dodpovu Hgbsfx Ah Uscp - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: - The conveyor belt integrated into the table is driven by a geared motor. - The built-in dial gauge on the handwheel and at the front of the table allows for precise monitoring of material removal. - The machine is designed on the principle of thickness reduction (thickness planing), which means uniform material removal and grinding accuracy to within 0.1 mm. - Optimal grinding pattern thanks to the oscillating sanding belt. Dodoww Raispfx Ah Uocp - No belt misalignment due to pneumatically controlled oscillation. - Sanding belt length: 1600 mm - Sanding belt width: 200 mm - Table length: 1000 mm - Working height: 120 mm - Drive motor: 5.5 kW Availability: short-term Storage location: Flörsheim

Condition: used, Year of construction: 1982, overall weight: 950 kg, Abrasive belt length 2200 mm, abrasive belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, abrasive belt speed approx. 21 m/s, feed rates 6 - 11 - 16 m/min, main drive motor 7.5 kW, feed motor 0.26 - 0.55 - 1 kW, pneumatic belt oscillation and belt air jet, incl. chassis Dcodpfxsxq Ehxe Ah Ujp

Condition: used, Polishing sander Löwer FA 4 S Year of construction 1998 Machine no. 9667 400V, 14.5Amp. 4x 0.37kW motor Working length 3000mm Dodpfownh Avox Ah Uecp Dimensions: 5000x18050x1600mm (LxWxH), weight 550kg - Documentation available: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Frame sanding machine LÖWER RSM 280 SX -used- Frame sanding machine sanding pad, oscillation, frame sanding device, feed belt, belt cleaning ----- Technical data ----- Sanding width: 190 mm, max. workpiece thickness: 120 mm, Speeds: 6,11,16 m/min, Dcsdpsu R Tbhofx Ah Usp Motor: 5.5 kW, weight: 550 kg

Condition: used, Year of construction: 1991, machine/vehicle number: 7379, Grinding machine for frames, moldings, stair treads, furniture parts, etc. - Manufacturer: Löwer - Type: ESM400S - 1 longitudinal grinding belt - 1 dust extraction brush - Year of manufacture: 1991 Dodpjw Hx Umefx Ah Ujcp - Grinding width: 390 mm - Grinding height: 120 mm - Table length: 1,300 mm - Grinding belt speed: 1,300 m/min. - Grinding belt length: 1,800 mm - Grinding belt width: 400 mm - Electric height adjustment - Grinding belt oscillation - Conveyor belt feed 3+6+12 m/min. - Machine length: 1,400 mm - Machine width: 1,220 mm - Machine height: 1,900 mm - Extraction connection: D140 + 80 mm - Air connection: 6 bar - Weight: 650 kg - Location: Warehouse D-32825 Blomberg

Year of construction: 2008, condition: used, Number of sanding units 8 st. sanding width 150 mm Machine can be inspected during production! Leistomat - Finisch and intermediate leveling machine Löwer LZ 8 ----- ----- for finish sanding (smoothing, defibering and edge breaking) or intermediate sanding profiled window latch - Finish and intermediate sanding machine with eight sanding blade aggregates, 2 surface units at the top (synchronism / counter-rotation) 2 surface units below (synchronism / counter-rotation) 4 profile units with angled arrangement top right, bottom right, top left, bottom left, all mating - linear guidance of all grinding units over Linear ball bearing sets on hardened shafts - Timed immersion of all in the opposite direction rotating grinding units directly above the incoming Workpiece edges to avoid looping through the Primer in the front edge area. By the It is possible to immerse the aggregates deeper in the Be able to deliver profiles. - Timed replacement of the rotating in synchronism Aggregate - motor workpiece thickness adjustment of the machine by means of motorized height adjustment via push button - Display of workpiece thickness via digital display with modern magnetic tape system - Variable grinding disc speed via frequency converter to adapt the grinding intensity to different Primers by means of frequency converters 200-1000 rpm - Workpiece width recognition at the machine infeed with automatic adjustment of the left grinding units to the current workpiece width - Profile preselection via selector switch on the machine inlet side as well as automatic adjustment of the Abrasive blade aggregates on the selected profile - modern PLC control for easy operation of the machine - Suction connection 5 x 100mm diameter - Length (body) x width x height (mm): 2600 x 1500 x 1600 Length complete: 3600mm (including roller conveyor with integrated workpiece width recognition) - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version Technical specifications: Number of sanding units: 8 pcs. Surface brush width: max. 150 mm Working height: max. 100 mm Surface Brush Motor: 0.75 kW Side brush motor: 0.37 kW Brush speed: 1380 rpm Feed motor: 1.1 kW Feed rate: 4-20 M / min Feed stepless Speed ??controller grinding units Automatic width detection Digital magnetic tape gauge Extraction nozzle: 5 x 100 mm Air requirement: 5 x 565 m3 / h Minimum air velocity at the connection of the machine: 20 m / s Dimensions: Length: 2600 mm Width: 1480 mm Height: 1700 mm Weight: 950 kg Dodpexpi D Uefx Ah Ujcp WITH inlet roller conveyor ----- Price of the Löwer amchine on request! he return conveyor device that can be seen in the pictures is no longer available and is NOT included in the scope of delivery (Technical data according to manufacturer - without guarantee!)

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush max. sanding width 300 mm max. sanding height 200 mm Dcedpsxfl Easfx Ah Usp year of manufacture 1994 with CE mark

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: 10999, DESCRIPTION Double-sided grinding machine / grinding machine top/bottom Manufacturer Löwer Type DSM 3000 with workpiece return Bthgq0Ygu0 Working width: 290 mm Grinding thickness: 2-200 mm Shortest workpiece length: approx. 320 mm Equipped with: 1x grinding unit from above, 7.5 kW 1x brushing unit from above, 0.37 kW 1x grinding unit from below, 7.5 kW 1x brushing unit from below, 0.37 kW Grinding belt dimensions: 300 x 1800 mm Dcsdpfx Aov Dfp Heh Uep Electric height adjustment, 0.37 kW Adjustable feed, 6/11/16 m/min. Compressed air: 6-8 bar Dimensions approx. 2700 x 1100 x 1900 mm Weight approx. 1600 kg

Condition: new, Number of sanding units 1 st. sanding width 150 mm Sanding height max. 150 mm Loewer edge finishing machine MiniSpin N ----- Machines for finishing and fine sanding of Edges and profiles with a grinding spindle horizontal or vertical. Motor 0,75 KW Spindle in vertical position for machining edges Pivoted spindle in horizontal position, laterally etc. for processing longer profile bars or Conjunction with a combined grinding head for grinding of edges with a grinding disc blades Grinding head swiveling + / - 20 ° for editing oblique lines Dedpfx Ahexmk Aye Uecp Working height / width 150 mm max. Diameter roller / brush

Condition: new, Number of sanding units 2 St. sanding width 190 mm Sanding height max. 2-180 mm LÖWER double-sided grinding machine DSM 2000 ----- Double-sided single wood sander for sanding Solid wood such as window wood etc. Stable top quality Guide with long casting tables, brushing and finishing equipment and conveyor belt feed. Suitable for high continuous loads even with higher chip removals. - Staggered sanding and finishing units at the top and bottom - Directly driven rubberized grinding rollers for slip-free power transmission - Combined grinding via roller and shoe for high chip removal at the same time flat intervention zone - Maintenance and wear-free CERMET-coated sanding shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and higher grinding Grinding belt service life - Forced pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the sanding rollers Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom using a precision threaded spindle Dimension display via scale ring (resolution 0.1mm) - Sanding belt tension via pneumatic cylinders with constant clamping pressure - Sanding belt change with pneumatic belt relaxation in seconds - Adjustment of the sanding belt run when changing the belt - electro-pneumatic compressed air monitoring - Run-in protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated non-slip and non-stick conveyor belts over heavy, 1000mm long cast tables with a finely planed surface and Spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and even workpiece transport - Feed gear motor with three different feed speeds for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - automatic workpiece thickness scanning (no previous measurement necessary) - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Dcsdpfjvu Hdtox Ah Usp Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Grinding thickness: 2-180mm - two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 6, 11 and 16 m/min. - automatic height adjustment: 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle: 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height: 850mm - Length: 2105mm - Length with control panel 2490mm - Width: 880mm - Height: 1910mm - Weight: approx. 1500 kg - Operating voltage: 400 volts, 50 Hz, 3P - CE version ----- ----- Basic price of the machine on request! ----- ----- Special accessories with surcharge: continuous feed 4-20 m/min. for speed adjustment to the previous machine Price on request Workpiece blow-off - using nozzles from above and below at the machine ...