Used Maka Stv 71 for sale (44)

Condition: good (used), Year of construction: 1990, Table milling machine with power feed Bwjdeyy I R Rspfx Afxet Tilting spindle With table extension on both sides

Condition: used, Year of construction: 1992, with Centrofix cutterhead Machine cleaned, fully inspected Tables measured – adjusted very precisely, max deviation 0.05 mm Test planing carried out Used, good condition, low hours Manufacturer: Maka Type: AH 430 Year of manufacture: 1992 Machine no.: 9201531 GS wood dust tested Motor: 3.0 kW Control panel on top Planing width approx. 430 mm Infeed table length approx. 1500 mm Outfeed table length approx. 1200 mm Swing guard Slotted/low-noise table lips Number of knives: 4 Centrofix cutterblock Bwodpfxoxuv Rre Afxot Table adjustment via handwheel automatic brake Extraction connection D 140 mm Space requirement approx. 2700 mm x 1200 mm x 1400 mm Weight approx. 800 kg Storage location: 97447 Gerolzhofen, loaded free of charge, unpackaged Handover in as-inspected condition, without any warranty or guarantee.

Condition: used, Year of construction: 1992, with Centrofix - cutterhead variable feed speed 2 x outfeed rollers Cleaned, lubricated, partially overhauled Fully set up, test planed, New parts: digital display, distance rings, infeed mat, connection box Used, good condition, top features Manufacturer: Maka Model: DH 630 A Year of construction: 1992 Machine no.: 9201891 GS-certified for wood dust Motor: 6.7 kW Planing width: approx. 630 mm Planing height: approx. 300 mm Bsdsxuv N Iopfx Afxswt Table roller: 1 pc, adjustable Segmented pressure beam Segmented infeed roller 2 steel outfeed rollers Feed rate: 0-21 m/min, stepless Number of knives: 4 Knife system: Centro-Fix reversible knives Digital height display Electrical height adjustment with handwheel for fine-tuning Extraction port D 150 mm Space required: approx. 1200 x 1200 x 1400 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, ex stock, unpacked Transfer as is, as inspected, without warranty or guarantee

Condition: good (used), Year of construction: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact design with control cabinet integrated into the base frame. CNC control BWO 900C, 1 MB memory, in the integrated PC. Technical data: Working areas / cube dimensions: for tool length 130 mm and diameter 60 mm X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 300 mm, at 120 mm tool height A-axis: 540° B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 45 m/min. Z-axis: 15 m/min. A/B-axis: 10,000 °/min. Bodpfoir Aq Tox Afxowt 1 high-speed milling spindle HSD 6.8 kW, Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm. With ceramic bearing, air-cooled. Tool holder SK 30 with tool changer. 1 drum-type tool magazine for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the top surface. Aluminum table top 1,000 x 1,000 mm with grid drilling 1 vacuum pump 54 m³/h, 1 vacuum clamping circuit Automatic central lubrication, Control cabinet with air conditioning unit. Work safety: Sliding door for front loading, protective cabin for the rear of the machine, with a side access door; the cabin is open at the top. Connection values: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz The use of an RCD (residual current device) in the machine power supply is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 18 m³/h Tool holders and machining tools are not included in the scope of supply. Used machine, without any guarantee or warranty.

Condition: excellent (used), Year of construction: 1995, upon request Bsdpfx Asfxgmgefxswt

Condition: excellent (used), Year of construction: 1995, CNC machine in good condition due to limited use. Previously used for door production but can be used for any purpose. Double table, can be loaded from the left and right. 4-axis x 5000 mm y 1350 mm Bodpfx Ajig T Epjfxowt z 450 mm a 190° Main spindle SK 40, 8 kW, water-cooled Up to 17,000 rpm Chain magazine with 24 positions.

Condition: excellent (used), IM Very good condition. Bsdpeyxnxljfx Afxowt

Condition: excellent (used), Motor power: 2.02 kW Pneumatic tensioners Pneumatic depth adjustment Shoulder length: 220 cm Working depth: 16 cm Bwsdpfxoh Im S Nj Afxjt

Condition: ready for operation (used), Motor 1.5 kW 2 presses Depth of opening 13 cm Width of opening 20 cm Height of opening 15 cm Bedpfet D Evpox Afxewt

Condition: good (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. Bwodpjvmpx Rsfx Afxot - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases.

Condition: used, Year of construction: 2000, Used machine MAKA CNC Door Processing Center HC 55 TBZ Year of manufacture: 2000 CNC machining center for processing interior doors (hardware mortising, vision panel cut-outs, peephole machining, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Working ranges: For door width: 250 – 1,280 mm For door height: max. 2,500 mm For door leaf thickness: max. 80 mm Rapid traverse speed: X / Y-axis: 45 m/min Z-axis: 10 m/min 1 universal milling unit SK40 With integrated A-axis swivel 190° (+/- 95°), along X-axis for lock/hinge machining on both sides along the longitudinal door edge directly with the unit. Water-cooled milling spindle, nominal output 8 kW, available from 7,000 rpm, continuously variable speed from 1,000 – 17,100 rpm, SK40 tool holder for automatic tool change. 1 chain-type tool magazine with 24 positions, for tools up to Ø 90 mm, for sorted storage up to max. Ø 160 mm, positioned at unit’s service position. Max. tool length 200 mm from spindle mount. Milling spindle and 2 x magazine positions equipped for angle/feeler heads with torque support. Machine table with width adjustment via program, as well as width measurement for edge processing for consistent milling depth on both sides. 1 set of infeed rollers for manual loading, automatically elevating and lowering. 1 longitudinal stop with pneumatic insertion stroke, mounted on the traversing unit for positioning according to door length and thickness. 4 pneumatic lateral stops, swing-in type, for doors with veneer/cover overhang up to max. 15 mm, with selectable height adjustment for varying stop heights on finished doors (single/double rebate doors). 2 vacuum clamping lines, 5 vacuum suction cups per line, 130/200 x 70 mm, with touch valve and blow-off device. Per line, 3 vacuum cups can be lowered according to the door height being processed. 1 vacuum pump, approx. 128 m³/h suction capacity, with 250-liter intermediate tank, enabling rapid vacuum build-up. Automatic central lubrication, free-standing control cabinet with air conditioner. Safety features: Bumper on both sides of the gantry, protective fencing on the sides. Bwedpfx Afsv S Dn Djxjt Various tools and tool holders can be taken over by agreement. The machine can be inspected in Hermaringen.

Condition: good (used), Year of construction: 2005, Used machine MAKA PE 70 5-axis CNC machining center for machining wood and plastic. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2005 Technical data: CNC control BWO 920 for 5-axis machining. LCD display 10.4" 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) A-axis 540° (rotation axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y axis 45 m/min. Z-axis 24 m/min. A/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power 7.5 kW (S1) 10 kW (S6), speed continuously adjustable up to 22,000 rpm, milling spindle HSK-F63, water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - HSK-F63 tool interface for automatic tool change system. - 1 horizontal drum magazine, with 20 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 x control circuits for "lifting / lowering" stops - 2 x control circuits for "lifting / lowering" slide bar - 2 x control circuits for "clamping / releasing" pneumatics - 2 x vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine designed with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per vacuum pump approx. 130 m³/h, with tank. - Vacuum supports with various suction plates. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. Work safety: - Mobile protective cabin with safety bumpers on the operator side. Repairs / maintenance before delivery: - New maintenance. - New slatted curtain on the portal - New sliding window - New Y-axis energy chain - New Z-axis energy chain - Various cables and air hoses replaced. Bwjdovr A A Tepfx Afxet

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used machine MAKA PM 270 R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2001 Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile control panel stand. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 1 chain tool magazine with 32 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "lifting/lowering" slide rail - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! The system can be delivered including various tool holders upon request. We would be happy to make you a separate offer for this. Bsdpfxovmywqe Afxjwt Vacuum supply: - 1 vacuum pump, approx. 140 m³ suction power, including a tank with a capacity of 250 liters for quick vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Raise/lower stops to position components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Mobile protective cabin with safety bumpers on the operator side.

Condition: used, Year of construction: 1999, Used MAKA KPF 334 RT 5-Axis CNC Machining Center Year of Manufacture: 1999 High-performance CNC milling center for 5-axis machining, ideal for machining deep-drawn parts. Compact design with control cabinet integrated into the base frame. Equipped with automatic central lubrication and a control cabinet with air conditioning unit. Model/Version: Gantry-type machine with two aluminum tables Axis Data: Axis: Size / Travel / Speed X-Axis: 2,750 mm / 40 m/min. Y-/V-Axis: 2,400 mm / 40 m/min. Z-Axis: 700 mm / 15 m/min. Rotation Axis: 540° / 10,000°/min. Swivel Axis: 200° / 10,000°/min. Machine connection: Voltage: 400V Voltage deviation: max. +/- 5% Operating temperature: 10 - 35° Air pressure: 6 bar Working areas / workpiece cube dimensions: X-axis: 2 x 1,000 mm (coupled 2,150 mm) Bwsdpfxov S Ut De Afxot Y-axis: 1,000 mm Z-axis: 400 mm These specifications are based on a fixture height of 170 mm / tool length of 60 mm. 1 Equipment 1.1 Table design Two aluminum surface tables with threaded bushings for mounting, each measuring 1,000 x 1,000 mm. The tables can be coupled for machining large components. Both table tops are also equipped with threaded bushings and centering bushings (or dowel pins) to accommodate the customer's milling fixture, as specified. 1.2 Vacuum supply Machine equipped with a vacuum system. 1 Vacuum Pump 1.3 Clamping System 1 Vacuum clamping circuit with vacuum distribution unit, pressure gauge, and pressure switch. Plug-in couplings mounted on the machine table. 1.4 Milling Unit: 1 DFM 83/90 milling spindle, ER16 / M22 x 1.5 2.5 kW / 27,000 rpm Universal unit for 5-axis milling with 90° head, tool holder ER16 / M22 x 1.5 1,000 to 27,000 rpm (infinitely variable speed), air-cooled. A-axis 540° (rotation axis +/- 270°) B-axis 200° (swivel axis +/- 100°) 1.5 Axis Drives Ball screw in the X/Y and Z axes; A/B axes with hollow shaft drives. 1.6 Work Safety 1 sliding door per table, automatically opening. Includes protective cabin. 1.7 Control System 1 BWO 900 machine control unit with 1 BWO 900C control unit, mounted on a mobile control panel. 1.8 Mains Voltage The machine is equipped for the following mains voltage: Voltage: 400 V (max. +/- 5%) Installed power: approx. 9 kW Frequency: 50 Hz The use of residual current protection in the machine supply line is not permitted. 1.9 Country Specification Technical machine documentation in German. Consisting of: - Operating instructions for the machine - Operating instructions for the control system - Electrical and pneumatic circuit diagrams - Control system language in German.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 73,695 h, functionality: fully functional, machine/vehicle number: 22021508, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, controller model: BWO RC, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 2,000 mm Bwodpfx Afoyq Nx Asxet Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse speed X/Y-axis: 60 m/min Rapid traverse speed Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control unit: BWO RC Operating hours: 73,695 h EQUIPMENT Swiveling spindle Coolant system (MMS) External chiller unit (Manufacturer: Maka) New ball screw for Z-axis, installed by Maka Service in 2024

Condition: repair required (used), Year of construction: 2014, operating hours: 23,000 h, functionality: not functional, machine/vehicle number: 21066714, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, controller model: Siemens Sinumerik 840D sl, TECHNICAL DETAILS Travel X-axis: 2,000 mm Bwjdpfx Aoyq Ra Ujfxjt Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse X/Y-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control model: Siemens Sinumerik 840D sl Operating hours: 23,000 h EQUIPMENT Swiveling spindle External cooling unit (manufacturer: Pfannenberg) Note: There is a fault in the control system. It does not respond to any inputs. Repair by Siemens Service is required!

Condition: ready for operation (used), Year of construction: 2008, operating hours: 53,216 h, functionality: fully functional, machine/vehicle number: 22024211, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse X/Y-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control model: BWO CNC Operating hours: 53,216 h Bwsdpfxsyq Nx Ns Afxjt EQUIPMENT 5 compact clamps (Model: Kopal Duo) Custom machine enclosure Swiveling spindle External chiller (Manufacturer: Pfannenberg, cooling capacity: 1.7 kW)

Condition: excellent (used), 530mm Jointer MAKA 4 traditional knives width: 530mm table length: 2900mm noise-reducing bars tilt-adjustable fence power supply: 380V, 4KW Bodeyybv Hopfx Afxjwt brake solid machine, very good condition, inspected

Condition: good (used), Year of construction: 2003, machine/vehicle number: 21017403, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 5,900 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, number of slots in tool magazine: 32, controller manufacturer: BWO 900C, overall weight: 8,000 kg, year of last overhaul: 2024, spindle motor power: 12,500 W, mount diameter: 90 mm, number of spindles: 1, rotational speed (max.): 17,000 rpm, rotational speed (min.): 1,000 rpm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in working order and in use will be available from 01.11.2024 at the earliest .After services and repairs are Vacuum pump, central lubrication, tool magazine, spindle . The machine connected to the network is possible to check and try out. In addition, on the equipment of the machine is a software with a postprocessor for the production of stairs and a laser projector. There is a possibility of training . Bodpfx Afsuyl Npoxewt