Used Manual Bending Machine Pan for sale (75,111)

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. Dedpoz Nhliefx Ak Ajkw This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Condition: used, operating hours: 16,158 h, Rebar Bending Machine, MEP FOCUS 12 Rebar Bending Machine, Used Machine Manufacturer: MEP S.p.A., Italy Model: FOCUS 12 Year of manufacture: 2006 Overall dimensions: MEP bending machine: Width: 3660 mm Depth: 1620 mm Height: 2350 mm Decoiler: Width: 4820 mm Depth: 1980 mm Height: 1460 mm Bending capacity: 6–12 mm Accessories: 5 pcs wire coils 1 pc 8 mm bending tool Programmability: One of the major advantages of the "Focus" series is that the bending angles can be set via an electronic control panel. There is no need to manually adjust mechanical stops as on older Hungarian machines. This significantly speeds up production when, for example, 100 identical stirrups need to be bent. The control system retains its programs even if the machine remains without power for months or even years. Dedpfszaq Dlsx Ak Aokw The software runs on a dedicated computer. MEP provides full service and technical support for all of its machines, regardless of their year of manufacture.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 90 mm, working width: 1,550 mm, roller height adjustment: 110 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, overall weight: 600 kg, total length: 2,300 mm, total width: 700 mm, total height: 1,150 mm, power: 1.1 kW (1.50 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, AKYAPAK AS 1550x90 sheet metal bending machine 1550mm x 2.5 mm, 3 rollers /ct2289/ Electric, pedal-operated rolling machine. Strong, robust construction. Djdpfx Aksxmvgko Aokw The upper roller can be rotated to remove the workpiece Convenient to use, suitable for workshops and industry Manufacturer: AKYAPAK AS 1550X90mm Year of manufacture: 2002 Bending Length: 1550 mm Bending capacity: 2.5 mm Roller diameter 90 mm - SAE 1050 certified high tensile steel rollers - Wire grooves at the ends of the rollers (4/6/9) mm - Motorized adjustable rear roller - Mobile control panel with foot pedal - Precision bending with brake motor - Conical bending device - Manual folding end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Machine dimensions 2400x800x1200 mm Weight 600 kg

Condition: good (used), Year of construction: 2020, operating hours: 42 h, functionality: fully functional, machine/vehicle number: 220/831, overall weight: 550 kg, total length: 2,200 mm, total height: 1,900 mm, total width: 1,100 mm, table width: 250 mm, table height: 900 mm, space requirement height: 2,000 mm, space requirement width: 1,200 mm, space requirement length: 2,500 mm, type of input current: three-phase, input voltage: 460 V, Equipment: CE marking, emergency stop, We have a bending machine for sale. It has only been used for 42 hours and 31 minutes, as can be seen in the attached picture. Djdpfx Ake Afyq Uj Askw It is in good condition and well-maintained. If you are interested and require further details, please call or send me an email.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Schneider, shaft diameter: 50 mm, bending force (max.): 10 t, overall weight: 2,200 kg, total length: 2,670 mm, total width: 1,650 mm, total height: 1,400 mm, input voltage: 380 V, input current: 24 A, type of input current: three-phase, Equipment: CE marking, documentation/manual, For sale: an INDUCTAFLEX AL-1e 4-roller CNC profile bending machine, purchased in 2021. It has been used very little and has only been switched on for a total of 100 hours over the years. It comes with a complete set of rollers, including a separate holder. INDUCTAFLEX AL-1e 4-roller CNC tube bender + tool set - Purchased in 2021 - CNC-controlled, 4-roller bending machine for aluminium profiles and tubes - Bending force: 10 t - Repeat positioning accuracy: 0.05 mm - Torque per roller: max. 2,500 Nm Dkodpfx Ako Afb Afe Aow - Shaft diameter: 50 mm - X-axis stroke: 200 mm - Dimensions: 1,650 × 2,670 × 1,400 mm - Weight: approx. 2,200 kg - Includes a tablet for training purposes - Tool set with holder - Located in Budapest, Hungary

Condition: good (used), functionality: fully functional, Year of construction: 2009, Used tube bending machine from Jutec Dkedpfx Aeyfmwxek Aow Type: 5000 Capacity: up to approx. 40 mm Mandrel length: 4500 mm CNC controlled Automatic head Manually rotatable head with hydraulic clamping Incl. 3 sets of tools Year of manufacture: 2009 Very little used

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Slanted segments in the upper beam Continuous bending and lower beam rails RAL 7016 paint Manufacturing EU immediately available ex works Dksdsfifa Aspfx Ak Ajw Freight costs on request

Condition: good (used), You are bidding here on a branded guillotine shear and a folding machine from the well-known German manufacturer Schechtl. Device features: - Guillotine Shear MSB 200: - Cuts 3 mm steel – significantly more for aluminum - Cutting length: slightly over 2 m - Front support table - 500 mm back gauge - Optional sheet metal tray Djdpfoyviwqox Ak Aokw - Free loading available - Folding Machine Schechtl MAX 200: - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2.5 mm (steel, sheet metal, aluminum, zinc, etc., higher for softer materials) - Standard rail – special radius rails for aluminum and zinc available upon request (add-on and special rails) - Foot pedal operation - Optional back gauge We also have available: Schechtl MSB 200, Schechtl MA 200, Schechtl HA 200 (2 mm), segmented RAS 2 m / 2 mm, and many others from 1 to 6 m. You will receive an invoice with VAT shown separately. Shipping can be arranged upon request. Free loading as shown in the pictures. Inspection and testing possible by prior phone appointment. Payment in cash upon collection – if you need anything else, please give me a call. Thank you! Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item numbers: 251007 and 251008

Condition: new, Year of construction: 2026, control type: manual, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, overall weight: 1,000 kg, total length: 4,200 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, Highly precise press brake for steel, copper, zinc, and aluminum sheets. These press brakes and all common spare parts are available ex stock. Maximum working length of the press brake: 4200 mm Bending capacity: up to 0.8 mm (steel sheet) Titanium-zinc sheet: 0.8 mm, aluminum sheet: 1.0 mm, copper sheet: 1.0 mm Bending angle of the bending machine: max. 160 degrees Cutting with the roller shear across the entire working width Bending ram thickness: 20 mm Cutting with the roller shear across the entire working width Raising of the upper beam in three positions Upper ram stroke: 80 mm Degree scale Weight of the press brake: approx. 810 kg Dksdsb Hxzyjpfx Ak Asw Cutout 60 mm / 45° Roller shear 0.8 mm, additional cost: 350 Euro Manual folding machine, additional cost: 75 Euro Delivery costs: 500 Euro to Germany and Austria Delivery date: every week, Monday/Tuesday Payment upon delivery or prepayment Invoice will be issued with 0% VAT. Your VAT identification number is required for this.

Condition: new, Year of construction: 2026, working width: 4,200 mm, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, sheet thickness copper (max.): 1 mm, back gauge: 1,320 mm, overall weight: 1,000 kg, total length: 4,500 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, foot remote control, Electric press brake RED-4200/0.8/150* with foot pedal and backstop. New electric precision sheet metal bending machine for 0.8 mm steel and 1 mm aluminum sheets. The main features of this sheet metal processing machine are its efficiency and precision. The bending machine enables bending operations with a maximum angle of 150 degrees. Electric control: A user-friendly control panel increases ease of use and the precision of repeatable bends. Roller shear: Enables cutting across the entire working width. Robust construction: The 18 mm thick bending beam ensures durability, while the 80 mm opening and the three-stage stroke adjustment of the upper beam facilitate material positioning. Machine equipment: electric control: upper and lower beam Foot pedal for control Electric backstop up to 1320 mm Dksdpoc I T Rxofx Ak Ajw Control panel Additional equipment: Roller shear up to 1 mm steel sheet / 1.5 mm aluminum - 500 euros Manual folding machine - 100 euros Magnetic alignment aid, 2 pcs, 36 cm - 100 euros Shipping throughout Germany: 500 euros Invoice will be issued without VAT as an intra-community supply.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, actuation type: electric, roller diameter: 90 mm, working width: 1,270 mm, sheet thickness (max.): 3 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), input voltage: 400 V, rotational speed (max.): 6 rpm, type of input current: three-phase, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, sheet metal roll bending machine BOLUK BM 1270 x 90 - 2.5 mm NEW! for sale. manufacturer: BOLUK 1270X90mm year of manufacture: 2024 Bending Length: 1270 mm Bending capacity: 2.5 mm Roller diameter 90 mm - SAE 1050 certified high tensile steel rollers - Wire grooves at the ends of the rollers (4/6/9) mm - Manually adjustable rear roller - Mobile control panel with foot pedal Dedpfx Aexhub Aok Aekw - Precision bending with brake motor - Conical bending device - Manually foldable end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Machine dimensions 1850x700x1200 mm Weight 520 kg

Condition: used, = Additional options and accessories = - 1 fuel tank - Day Cabin - Thick Axles = More information = General information Year of manufacture: May 1990 Year of construction: 1990 Operating hours: 66.819 Cab: day Drivetrain Type of fuel: Diesel Transmission Transmission: Automatic Axle configuration Tyre profile: 50% Front axle: Differential lock; Steering; Reduction: hub reduction Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Measures Length: 12 cm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Dodj Adty Hepfx Ak Askw Visual appearance: average

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25510, total width: 790 mm, total length: 850 mm, total height: 830 mm, empty load weight: 295 kg, Export is possible. Djdpfxjyw N H Us Ak Askw

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: HEB IPE section bending roll, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, shaft diameter: 200 mm, roller diameter: 650 mm, bending radius (max.): 1,000 mm, pipe diameter (max.): 250 mm, overall weight: 27,000 kg, input voltage: 380,440 V, input frequency: 5,060 Hz, Equipment: CE marking, documentation/manual, emergency stop, hardened rollers, Profile bending roll hydraulic model AR200, year 2008 make MG Italy Capacity bending chart and photos in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. -electric 30 Kw on the hydraulic power unit- voltage 380/50 -Digital position readout on the bending rolls -Manuals and schematics all available along with the machine. Dkjdpfx Asz Dkr Hjk Aew -Machine delivered in working condition. CAPACITY CHART IN ENCLOSED MG MODEL AR200 SECTION BENDING ROLL

Condition: new, Year of construction: 2025, Technical Specifications: Laser Power: 2kW Laser Type: Continuous Fiber Laser Laser Source: MAX Adjustable Cleaning Length: 0 – 300 mm Approximate Cleaning Speed: 10 – 60 m2/hour Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Dksdpfxozkkc Uj Ak Asw Operating Environment Temperature: 10 – 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Weight: 230 kg CE Certification: Included

Condition: used, Manual bending machines. The machines are very sturdy, fully operational, and have knives in good condition; rust needs to be cleaned off. Testing is possible. Specification: Manufacturer: Poland Dedpfx Aoymm D Iek Aokw Year of manufacture: 2008 – 2012 Working length: 3100 mm Bending thickness: 1.0 mm If you have any further questions, we will be happy to answer them.

Condition: good (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine Dkedpfx Ajz A S Srok Asw -Manufacturer: Carl Kneusel, 3-roll bending machine, hand-operated -Max. sheet width: 1020 mm -Max. sheet thickness: mm -Roller diameter: 55 mm -Dimensions: 1670/580/H1150 mm -Weight: 156 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Pipe Bending Machine Zopf Model KB 100: Capacity: - Maximum pipe diameter: 100x5 mm (St. 37) Dsdpfx Ajx I Afxsk Askw - Square profiles: 80x80x3 mm - Solid material: 45 mm - Maximum tool diameter: 900 mm - Bending angle up to 210 degrees - Bending speed: 0 - 2.2 RPM - Motor: 11 kW, 400 Volt, 50 Hz, 3-phase - Weight: 1850 kg - Dimensions: 140x80x160 cm Features: - Digital display - Programmable bending angle - With foot pedal - Equipped with inverter - Powerful motor and reduction gearbox for high torque - Control unit for setting the bending angle - Counter for positioning the counter bearing - Mobile control panel - Quick tool change - All shafts hardened and ground - Manual material clamping - Worktable made of CK 45 steel

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm Dkedpfx Akoz N Hxho Asw bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: used, Year of construction: 1993, Technical details: tube diameter: 80 mm tube diameter min.: 6 mm control for program: Gelma MM-1 tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. Dksdpfx Aju Ibyyok Asw The bending machine is movable/adjustable. Equipment/accessories: 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm *

Condition: like new (used), functionality: fully functional, Year of construction: 2025, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 118 mm, overall weight: 220 kg, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, NEW!!! LFSS PK 30 Profile bending machine, pipe bender 30mm /ct2275/ Manufacturer: LFSS Type: PK30 Year of manufacture: 2025 Horizontal and vertical operation Rollers: 2 driven Upper roller up-down movement manually Max. shaft diameter: 30 mm Working speed: 4 m/min Bending capacity: - Flat steel: 50 x 10 mm - Square 35 mm - Closed section: 40x 40 mm - Pipe 48 x 3 mm Power: 400 V / 0.75 kW 50Hz Electric foot switch with emergency stop Standard bending set Weight: approx. 200 kg CE certification Dedpfxjxh D Nvs Ak Ajkw Instructions in German or English Dimensions: W 700 x H 1450 x D:750 mm

Condition: ready for operation (used), functionality: fully functional, JUTEC Type 3000 with profile bending attachment PB 20 -CE marking -Bending capacity / flat steel 100x8mm -Bending capacity / round material 20mm -Digital angle bending adjustment / display -Material stop -Drive: electromechanical -Control: digital -6 rpm (bending roller) -Tool holder / hexagon 40mm -Foot switch -Documentation Dimensions: L x W x H 0.8 x 0.7 x 1.5 meters / Weight approx. 85 kg Errors and omissions excepted. Dedpfx Ajz S Afpek Aokw

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, - The machine was purchased new in 1988 and has been in our possession ever since. - The visual condition can be seen in the photos. Considering its age and the existing paint condition, the mechanical condition is satisfactory. - The machine is operational and can be demonstrated by prior arrangement. - The machine has been technically modified. This provides a second, higher speed for processing smaller pipe dimensions. - A protective frame has been manufactured to protect the machine, which helps to minimize external damage. The protective frame also has two mounts that can be used to prepare or mount various profiles. - The control panel has been expanded. As a result, up to 10 set values can now be pre-programmed. - The existing standard tools are included with the machine. All arbor diameters are 60 mm. - The original operating manual is available. - The scope of delivery includes a comprehensive selection of tools for various applications, including: Round tubes Flat bars for heavy and light arbors Square profiles Rectangular tubes T-profiles Angle irons Diagonal tools Dsdpfx Aksz Hcp Ne Aekw - A total of 15 pallets of tools belong to the machine (see photos and description). - The machine will only be sold together with the complete set of tools. - The price is ex works. The dismantling, loading, and collection of the machine must be carried out by the buyer himself or by a commissioned forwarding agent. Technical specifications according to available documentation. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW Dksdpfexacdvox Ak Asw weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 265040200001, Technical specifications available upon request. Dodpszd Hhmjfx Ak Askw