Used Manufacturing for sale (32,846)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Table saw with sliding table TKU 315 - 220 Volt Bsdpfx Aeypm I Sobwedc - Blade diameter: 315 mm - Year of manufacture: 1992 Margin scheme (differential taxation) Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers.

Condition: good (used), Year of construction: 1967, functionality: fully functional, Metal cut-off saw Type LMS I - Year of manufacture: 1967 - 380 Volt - 1450 rpm; 2950 rpm - 1.8 kW Transport available at an additional cost! Bsdpfxjxa Hkme Abwodc Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Year of manufacture: 1988 Cutting capacity: 5300 x 2200 mm Cutting thickness: 80 mm Horizontal cutting height: 2100 mm Built-in extraction device Manual or automatic feed: 11/17/22/33 m/min Machine width: 6300 mm Saw blade: 300 ø 7.5 HP motor Digital measuring system horizontal and vertical Bdsdpfjy Nyr Ssx Abwoc Machine ready for immediate use Very good condition Ex-site Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers upon sale.

Condition: used, Year of construction: 1980, For sale is a robust mechanical eccentric press / stamping press from the manufacturer MGR. The machine is ideally suited for punching, forming, and pressing operations in the metalworking industry and comes from industrial use. Technical data: Manufacturer: MGR Type: 45R Year of manufacture: 1980 Pressing force: 45,000 kg (45 tons) Stroke: 230 mm Ram stroke: 80 mm Ram adjustable: 55 mm Adjustable stroke: 9 – 120 mm Motor power: 3.5 hp Voltage: 380 V Machine no.: 311860 Bodpoy Unmbsfx Abwedc

Condition: good (used), Year of construction: 1994, For sale is a hydraulic press from the manufacturer Lauffer Pressen. Technical data: Bedpsy Ufqkjfx Abwjdc Manufacturer: Lauffer Pressen GmbH & Co. KG Type: VSK 0125 Year of manufacture: 1994 Machine number: 10248/14292 Control system: conventional Condition: used, functional Application area: pressing, forming and shaping operations Equipment: Hydraulic press Control panel with displays and controls Safety controls Robust steel construction The machine comes from ongoing production and is in used condition with normal signs of wear and tear consistent with its age. Inspection possible by appointment.

Condition: used, functionality: fully functional, power: 11.3 kW (15.36 HP), fuel type: diesel, fuel tank capacity: 27 l, color: red, operation weight: 1,790 kg, number of seats: 1, Year of construction: 2022, operating hours: 400 h, Equipment: adjustable chassis, cabin, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, standard shovel, Yanmar SV17VT Mini Excavator | Year of Manufacture 2022 | Only 400 hours | Complete Package | Ready for Immediate Use | VAT Shown Separately For sale is a well-maintained Yanmar SV17VT mini excavator from 2022 with only 400 operating hours. The machine is in very good technical and optical condition, is ready for immediate use, and has only been used with care (not a rental machine). Offered as a complete package – ideal for immediate use without additional investment. Perfectly suited for landscaping, paving, civil engineering, and work on confined construction sites. --- Technical Data: * Year of Manufacture: 2022 * Operating Hours: 400 h * Operating Weight: approx. 1,790 kg * Adjustable Undercarriage: 980 – 1,320 mm * Digging Depth: approx. 2.60 m --- Features & Advantages: * Adjustable Undercarriage (Variable Track) * Very compact – ideal for narrow passages * High stability due to extendable undercarriage * Sensitive and precise control --- Condition & Maintenance: * Very low wear * No maintenance backlog * Regularly maintained and lubricated * Ready for immediate use --- Complete Package Includes: * Ditch Bucket 300 mm (3 teeth) * Ditch Bucket 400 mm (3 teeth) * Screening Bucket 600 mm (5 teeth) * Grading Bucket 1000 mm (hydraulically pivotable) * Ripper 300 mm (3 teeth) * Lifting Hook * Block Setting Grab All attachments are ready for immediate use – ideal for versatile work. --- Additionally Included: * Original Yanmar Lubricating Grease * Würth Lubricating Grease (cartridge) * Various new filters * Spare Exhaust Pipe --- Price Complete Package: €18,390 net (plus VAT) = €21,884.10 gross * VAT shown separately * Sale with proper invoice --- Delivery within NRW possible for an additional fee. Inspection possible by appointment. Please feel free to contact me if you have any questions. Bsdpfx Asy D Uvnebwjdc

Condition: used, Various micrometers from different manufacturers Pos1 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Pos2 Manufacturer: Tesa Swiss Made Measuring range: 100 – 125 mm Scale division: 0.01 mm Pos3 Manufacturer: Unknown Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos4 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Locking screw defective Pos5 Manufacturer: Hommel Werke Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos6 Manufacturer: Mahr Messtechnik Measuring range: 70 – 95 mm Scale division: 0.01 mm Pos7 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Pos8 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos9 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos10 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos11 Manufacturer: Tesa Measuring range: 75 – 100 mm Scale division: 0.01 mm Locking screw missing Pos14 Manufacturer: J.E. Reinecker Chemnitz Measuring range: 100 – 125 mm Scale division: 0.01 mm Pos16 Bdjdpfx Aeyhmwqobwec Manufacturer: Mahr Measuring range: 170 – 195 mm Scale division: 0.01 mm Pos17 Manufacturer: Mahr Measuring range: 170 – 195 mm Scale division: 0.01 mm Pos19 Manufacturer: Hommel Werke Measuring range: 200 – 225 mm Scale division: 0.01 mm Pos23 Manufacturer: Mahr Measuring range: 145 – 170 mm Scale division: 0.01 mm Pos26 Manufacturer: Kern Measuring range: 0 – 25 mm Scale division: 0.01 mm Pos28 Manufacturer: Unknown Measuring range: 70 – 95 mm Scale division: 0.01 mm Pos29 Manufacturer: Unknown Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos30 Manufacturer: Mitutoyo Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos35 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos36 Manufacturer: Mahr Measuring range: 145 – 170 mm Scale division: 0.01 mm Pos37 Manufacturer: Mahr Measuring range: 170 – 195 mm Scale division: 0.01 mm Pos38 Manufacturer: Steyr Measuring range: 150 – 175 mm Scale division: 0.01 mm Pos39 Manufacturer: Steyr Measuring range: 175 – 200 mm Scale division: 0.01 mm Pos40 Manufacturer: PAV Measuring range: 250 – 275 mm Scale division: 0.01 mm Thread micrometers – screw micrometers Micrometer - Frame micrometers – measuring instrument e.g. for gear measurement – external measurement tool – disc micrometer – precision micrometer – precision measuring instrument – frame micrometer Price per piece: €35 net, ex-works, plus packaging costs Subject to errors and omissions in all technical data. Sale exclusively to countries within the EU.

Condition: used, functionality: fully functional, Various used rack cutters / rack milling cutter groups from different manufacturers Manufacturer: Arnold Dold GmbH & Co. KG 24 rack milling cutters available Module 0.5 – gang milling cutter Module 0.7 – gang milling cutter Module 0.9 – TiN coating Module 1 – 2 pcs available – gang milling cutter Module 1.25 – gang milling cutter Module 1.5 – TiN coating Module 1.75 – gang milling cutter Module 2 – 4-flute – minor damage Module 2 – TiN coating Module 2.5 – 8-flute – minor damage Module 3 – reground Module 3 – 7-flute – minor damage Module 3 – 7-flute – reground – BPIII – Ü Module 3 – TiN coating Module 5 – 4-flute – reground Module 5 – 4-flute – TiN coating Module 6 – 3-flute – TiN coating Module 6 – 3-flute – TiN coating – reground Module 7 – 3-flute – reground Module 8 – 3-flute – reground Module 10 – TiN coating Module 10 – reground – finish cutter Module 12 – TiN coating – finish cutter Module 12 – minor damage Module 13 – finish cutter Module 14 – reground Module 16 – reground Pressure angle: 20° BPII-Ü Bore diameter [mm]: 40; 50 Keyway [mm]: 10; 12 Width [mm]: 32.5; 45.5; 44; 17/21; 16/20; 14/18; 21/25; 18/22; 65/73; 48/57; 31; 66/72; 69/77; 70/78; 60/64; 60/66; 82; 72/80; 82; 40; 39; 47; 52; 56; 64 External Ø [mm]: 169; 140; 141; 200; 150; 198; 195; 199; 197; 201; 200; 219; 192; 191 Manufacturer: Saazor – Wälztechnik ZORN GmbH & Co. KG 7 rack milling cutters available Module 1 – 16-flute – TiN coating – minor damage Bsdpoytrh Esfx Abwsdc Module 1.5 – 9-flute gang milling cutter; 9 teeth per row; 2 – tangential milling cutter; 6 – tangential milling cutter Module 10 – TiN coating Pressure angle: 20° DIN 3972 II - Ü or DIN 3972 II Cl. A - Ü Bore diameter [mm]: 40 Keyway [mm]: 10 Width [mm]: 52/60; 55/85; 60/90; 33/40 External Ø [mm]: 176; 200; 198; 199 Manufacturer: Klingelnberg – 6 rack milling cutters available Module 2.5; 2.75; 3.25; 3.75; 4.5 Pressure angle: 20° Bore diameter [mm]: 40 Keyway [mm]: 10 Width [mm]: 30/38; 28/36; 35/42; 39/47; 44/52 External Ø [mm]: 148; 149; 150 All technical data subject to errors and typographical mistakes. Price on request Sale exclusively to EU countries.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Edge banding machine Tempora F 60.06 - Year of manufacture: 2018 - Exchangeable glue pot - Units for pre-milling, end trimming, flush cutting, milling, radius scrapers, surface scrapers, buffing wheel - With separation agent and cleaning agent application - Spray device - Edge thickness: 0.4-6 mm - Installation length: 3220 mm - Saw trimming Transport possible at extra cost! Bdedpfxsx Ha I Uo Abwoc

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Painting booth wall Schuko - 350 Ø Bjdpsytwlcefx Abwjdc - 1750 x 2000 mm - Year of manufacture: 1989 - with side deflector plates - throttle valve in good condition - fan dimensions: 800 x 1330 mm, height 600 mm Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers upon sale.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Mafell Hand Planer ZH 245 Ec ABSOLUTELY LIKE NEW 230 Volt Bdedsyt Di Uopfx Abwoc 2500 Watt 0-4 mm 13.2 kg with new replacement belts Transport possible at additional cost!

Condition: good (used), Year of construction: 1966, Spindle moulder type 54F, year 1966, V-belt drive, reversible (left/right rotation), 4 spindle speeds, 30 mm spindle, 3 kW, transport dimensions 940 x 780 x 1200 mm, weight 480 kg. Transport available at extra cost! Bjdpfxoy E Nuhj Abwjdc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, Fully operational block production plant equipped for both concrete and lightweight expanded clay aggregate (LECA) block manufacturing. Currently in use — production process can be demonstrated on site. Key Features: Metalika concrete mixer (2023) with integrated precise moisture sensor Many new moulds available Average production capacity: • 270 m² of pavement blocks per shift • 50 m³ of LECA blocks per shift Technical Specifications: Upper and lower vibration system 1.5 m³ ready-concrete hopper 0.75 m³ mixer with 11 kW motor 8 m³ material bunker Hydraulic power unit Water metering system Precise moisture meter Adjustable/variable production speed Automatic production pallet de-stacking and stacking Pneumatic palletizing gripper Large quantity of production pallets included Technical specs LM concrete block plant (year 2005): • Vibration frequency – 3000 rpm • Vibration amplitude – 0.7 mm • Exciting vibration force – up to 12 kN The nominal pressing force in vibrating mortar is achieved by setting the hydraulic pressure parameters • Cycle duration – from 30 to 50 seconds, depending on the product and operating mode. • Moulding dimensions: o tile plate – 800×500×100 mm o wall elements – 800×500×200 mm • Installed power – 6 kW, 380 V, 50 Hz • Machine dimensions – 2000×4000×2000 mm • Machine weight – 2.5 t • Drive type – hydraulic • Nominal pressure – 14 MPa (140 bar) • Pump pressure – 25 MPa (250 bar) • Working fluid volume – 180 l • Oils used – HPM46 • Machine control – process-following electro-automation Concrete mixer (Metalika, year 2023): • Mixers geometrical volume: 750 L • Dosage of cement and aggregate: By weight • Mixers output height from ground: 1.4 m • Water dosage: 50 ml impulse • Belt conveyor for aggregate: Yes • Mixer engine: Motor 11 kW • Vibromotor: 2 × 0.27 kW • Snail transporter engine: 2.2 kW • Hydraulic power pack: 4 kW • Total power: 18 kW • Number of aggregate belt conveyors: 1 • Aggregate and cement scale: Yes, above the mixer • Automatic operation: Yes • Capacity max: 8 m³/h • Capacity of sand hoppers: 1 × 6 m³ 3) Ludwig WAPP moisture controller (year 2023) 4) Pneumatic Cubing Clamp Probst ATZ-P4 (year 2023) Current molds in stock (size in mm): Building blocks (LECA blocks): 1) 500x300x200 2) 400x200x200 Pavement stones: Bsdey S Rvtepfx Abwedc 1) 200x100x50 2) 200x100x60 3) 200x100x80 4) 180x120x60 5) 180x120x80 6) 240x60x80 7) 300x300x60+300x150x60+150x150x60 8) 240x240x60+240x120x60+180x120x60+120x120x60+120x60x60 9) 300x300x80+450x300x80 Kerb stones: 1) 800x200x70

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, Complete concrete block production line Manufacturer: Schlosser Control system completely renewed in 2019 Production of paving stones, grass pavers, etc. Bdedpsy Sin Uofx Abwsc Drying unit Palletizing system

Condition: excellent (used), EXTRUDER SCREW & BARREL manufacturing machine CNC milling machine for extruder screws (thread and gear milling machine) Manufacturer: Wanderer Model: GF 34 CNC Year of manufacture: 1991 Bdodeyldq Ajpfx Abwoc 4-axis Siemens Sinumerik 3M (GA4) path control, electronic handwheel Equipped with RF radial milling head for machining extruder screws with climb milling unit, automatic chip conveyor, coolant system. Includes: 1 fixed steady rest, 2 clamping steady rests, 2 bushing jigs, 1 chuck, RF milling head, safety enclosure with sliding doors, operating keys, machine manuals, control documentation, etc. Main drive: 20 kW DC motor Max. workpiece diameter: 600 mm Milling length: 2150 mm Thread pitch: 1 – 9999 mm Workpiece diameter over support: 160 – 320 mm Spindle bore: 120 mm Number of teeth (min./max.): 4 – 100 Tool holder: ISO 50 Infinitely variable longitudinal feed: 1 – 5000 mm/min Max. workpiece weight: 2,000 kg Electrical connection: 380 V / 50 Hz Total power requirement: 50 kW Machine weight: approx. 10,000 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21610229, Spring coiling machine WAFIOS ASF3; for torsion and leg springs. Wire diameter: 1.0–3.5 mm. Max. spring diameter: 50 mm. Leg length: 115x130 mm. Bsdpfx Asyg Nitobwsdc Fully functional, including accessories (see pictures) and pay-off reel.

Condition: excellent (used), Year of construction: 2020, ACSYS Model: BARRACUDA® Custom Dual FL70S ACSYS Laser Processing System BARRACUDA® Custom Dual FL70S Fiber Laser – Industrial Laser System – Year of Manufacture 2020 For sale is a high-quality ACSYS laser processing system, model BARRACUDA Custom Dual FL70S, manufactured in Germany. The machine is in a very well-maintained condition and is a professional industrial system for precise laser marking, engraving, and material processing. The system is equipped with two air-cooled fiber lasers (2×70 W), making it ideal for series production, industrial marking, engraving, labeling, and processing of complex components. Thanks to its stable granite axis construction and fully enclosed safety cabin, the machine operates with the highest precision, reliability, and safety (Laser Class 1). Perfect for use in industry, metalworking, automotive suppliers, toolmaking, electronics, nameplates, DataMatrix codes, barcodes, serial numbers, and much more. Capabilities: - High-precision laser engraving and laser marking on metal and various materials - Series marking, nameplates, QR / DataMatrix codes, logos, numbering - Processing large layouts without misalignment (Large Field Removal Option) - 3D component processing possible - Camera positioning system for precise workpiece alignment - Automated processes / industrial integration possible (PLC, network, USB) - Low-maintenance, air-cooled fiber lasers with long service life - Fully enclosed, safe industrial system (Laser Class 1) Features / Options: - Camera system LAS – Live Adjust System HD - Large Field Removal (LFR) – processing large fields without misalignment - Industrial PC control with ACSYS Software Suite - Network / USB / PLC connectivity - Automatic door & safety monitoring - Lighting & signal beacon - Air-conditioned control cabinet - Fume extraction and filtration system for laser fumes - Extraction and filter unit (ULT LAS 1500) - Max. airflow: 3,240 m³/h - Nominal airflow: 1,200 m³/h - Max. negative pressure: 3,450 Pa - Power consumption: approx. 2.2 kW - Weight: approx. 300 kg Technical Data: Machine - Manufacturer: ACSYS Lasertechnik GmbH (Made in Germany) - Model: BARRACUDA® Custom Dual FL70S - Year of manufacture: 04/2020 - Laser: 2 × Fiber laser, 70 watts each (air-cooled) - Wavelength: 1055 – 1070 nm - Processing area: approx. 570 × 570 mm - Travel path: - X: approx. 875 mm - Y: approx. 600 mm - Z: approx. 190 mm Electrical Data: - Connection: 3AC / N / PE 400 V - Frequency: 50 Hz - Power consumption: approx. 5.5 kW Dimensions & Weight: Bsdoyi Twgjpfx Abwjdc - Cabin width: approx. 2050 mm - Cabin height: approx. 2300 mm (with signal beacon approx. 2600 mm) - Cabin depth: approx. 2850 mm - Total machine weight: approx. 3,800 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We are happy to answer further questions by phone.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 84KB2, Progressive header SACMA SP.240 Fully functional, operational, ready to produce Available for any test Technical information: Number of dies: 3 Heading tonnage: 550 KN Maximum cutoff diam (500N/mm²): 10,5 mm. Max. cutoff length: 85 mm. Kickout stroke die max.: 65 mm. Kickout stroke punch max.: 20 mm. Speed pcs. per minute: 275 Power of main motor: 22,5 KW Diam. dies: 54 mm. Length dies: 90 mm. Diam. punches: 38 mm. Net weight: 10.600 kg. Gross weight: 12.300 kg. Condition: very good, operational Year: 1990 Ready for immediate delivery Machinery runs without any problems. Bodpfx Ajy Nx Hbebwedc Available c/o HBR srl - Calolziocorte (LC) Italy

Condition: excellent (used), functionality: fully functional, Large fully hydraulic EISELE: Weight approx. 0.75 t, saw blade 440 mm Speeds: 12.5 / 25 rpm Motor power: 2.6 / 3.2 kW Bsdpfx Aboy Ncfujwedc Hydraulic saw feed Hydraulic vice Cutting ranges: 200 x 100 mm (square tube) Mitre cut one-sided 45°.

Condition: excellent (used), Year of construction: 2020, PUTZMEISTER CONCRETE PUMP M760 2020. Concrete pump PUTZMEISTER M760 after full service Year; 2020 Mileage; 429h!!! ENGINE; KUBOTA 48,5Kw Pressure;10bar Machine in perfect condition ready to work (no hoses) net price: 137900 zł Bjdpfstq R Ukox Abwjdc gross price: 169617 zł Below is the link to the video

Condition: excellent (used), Year of construction: 2023, Laser Welding Robot Manufacturer: TRUMPF Model: TruLaser Weld 5000 (LR03) Year of construction: CW 51/2023 – Commissioned: 2024 4,000-watt solid-state (fiber) laser Operating hours: as new, used ADVANCED EQUIPMENT: 30 m LLK (laser light cable) TruDisk 4001 (solid-state, fiber) with 1 LLK-A, 1 unit, incl. chiller, incl. safety package for laser welding Workpiece Processing: Rotary module for shielding gas guidance FusionLine FusionLine combination nozzle Positioners: Rotary-tilt positioner with endless rotation Zero-point clamping system for rotary-tilt positioner Safety cabin extended to 4,800 x 4,800 mm (front x side) Data transmission: OPC UA for Machine Tools Basic (license may be required) EQUIPMENT: Machine: Collision protection KUKA Robot KR 70 Machine status indicator light Compressed air and shielding gas supply Machine designed for ambient temperatures up to 45°C Welding optics Perlator nozzle Welding optics BrightLine Scan Motorized focus adjustment Welding process visualizer Process gas at welding optics Linear nozzle Process gas and crossjet programmable Bodpfx Asw U Ezzobwedc Operation / Programming: KUKA smartPAD Production plan Touch panel with 21.5'' TFT color display Touchpoint user interface Data transfer: USB interface RJ-45 network interface Central Link Remote support interface Online update manager Safety: Work area monitoring Workpiece Processing: Forming gas Further Optional BASE EQUIPMENT: Automatic sliding door Compact dust extractor with 3,000 m³/h Support arm for operator panel Axis adjustment set Robot elevation (extended standard) Data usage agreement TECHNICAL DATA: Type: High Accuracy Robot Number of axes: 6 Rated payload: 70 kg Repeatability: +/- 0.05 mm Rotary-tilt positioner Max. working area: 2,000 x 1,000 mm x 1,200 mm Max. load: 500 kg Rotary table Max. working area: 2,350 mm (diameter) Max. working area (height): 1,150 mm Max. load (per side): 250 kg Rotary changer with turnover axis Max. working area (turnover drum diameter): 1,200 mm Max. working area (length): 2,600 mm Max. load (per side): 750 kg Turnover positioner Max. working area (turnover drum diameter): 2,000 mm Max. working area (length): 4,000 mm Max. load (per side): 1,000 kg Compact rotary changer with 3D clamping plate (rectangular) Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Insert height: 830 mm Compact rotary changer with vertical rotary axes: Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia ring indexing table: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Vertical rotary axis rotation range: +/- 190° Max. permissible mass moment of inertia vertical rotary axis: 359 kg*m² Insert height: 885 mm Compliance with CE and EU Machinery Directive must be verified by the buyer upon recommissioning if applicable. Original price: over EUR 580,000 This used machine can be inspected under operating conditions. All information provided without guarantee – sale excludes all warranties and liability. Subject to prior sale.

Condition: good (used), Year of construction: 1980, max. pallet size 120 x 165 cm 20 nail guides Bedpfx Abexpi N Rewsdc year of manufacture 1980, still in good condition

Condition: good (used), Year of construction: 1998, functionality: fully functional, BGU clean air unit type RLG 1000, H2-certified, B1 design, 400 Volt, 1.95 kW, 730 m³/h, weight 150 kg, machine dimensions 1150 x 650 x 1400 mm. Transport possible at extra cost! Bsdpfx Aexf E Hkobwsdc

Condition: good (used), Year of construction: 2009, functionality: fully functional, Complete Corali automatic pallet production line. The production line is ideal for example, to produce paper and cardboard pallets. The automatic setup for fast changeover enables top efficiency even with small production runs. Machine Is in use and operational. Facts about the line Bjdpfoy Exvnex Abwodc - Deck nailing unit - Leg nailing unit - Assembly unit - Foiling unit, 6 rolls - Ink printing unit - Fast change setting, change over time about 5 min. - Minimum production series up from 15 pcs - Capacity approximately 1800 pcs / shift - Pallet sizes min. 530x530mm, Max 1500x1250mm - Wooden blocks / two block cutting saws and convoyer - Compressed blocks can be loaded manually - Closed and open deck pallets - 2 operators - Corner cutting saw - Robot stacking, - Binding of the stack - Possibility to feed previously manufactured covers to the production line - Manuals both in written and as files - Year of manufacture 2009 The buyer will be responsible for dismantling and transporting the line at the agreed schedule. The line will be sold as a single wholeness.

Condition: used, Year of construction: 1984, functionality: fully functional, thread length: 48 mm, total length: 75 mm, metric thread diameter (min.): 2 mm, metric thread diameter (max.): 6 mm, Ingramatic RP 1 # 451 1984 230-600 pieces 2.5–6 mm Blank length: 4–75 mm Bsdpfxsy D Nghs Abwedc Thread length: 48 mm Tool dimensions: 95/85x25x48 Power: 12 kW