Used Masturn 550 for sale (2,677)

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 680 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally included: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. Gsdpfxjk Aba Ts Af Tsua We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 2400-1300-550 RA1147 Type 356.10 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 mm push-off element: roller Guedpfxjk Aa Ebe Af Tja adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 1900-1800-550 RA1149 TYear of manufacture 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm Gedpek Aa Eiefx Af Tjua nominal/external width (NB): 610 / 1800 mm conveying length: 1900mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Gusdpfx Afjk Aa Nbj Tea Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GF 45°-750-550 IR700 Godpfxek Aa T Ho Af Teua RA1390 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 766 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 700 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (V m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1 belt: double layer, green, smooth Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, saw blade diameter 550 mm Number of revolutions 3580 r.p.m hole of sawblade 32 mm Control NC total power requirement 3 kW weight of the machine ca. 250 kg required space 980 x 1130 x 1430 mm The Gerd Wolff AC 550 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Schnittbereich 90° rund: 155 mm Schnittbereich 90° quadratisch: 155 x 155 mm Schnittbereich 90° rechteckig: 260 x 200 mm Schnittbereich 45° rund: 130 mm Schnittbereich 45° quadratisch: 130 x 130 mm Schnittbereich 45° rechteckig: 180 x 200 mm Standard Accessories - Location points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air gun Gujdpfxjymf Tbj Af Tea Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: new, cutting diameter 550 mm saw band length 6850 x 41 mm cutting width 1,3 mm Control Halbautomatisch Cutting area - square 550 x 550 mm Cutting area - flat 550 x 700 mm total power requirement 4 kW / 1580 Nm kW weight of the machine ca. 3775 kg dimensions of the machine ca. 1850 x 1500 x 3450 m TThe KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw. Gujdpfeymf S Dsx Af Tea In addition, the machine has a driven roller table which is 2 meters long on both the front and rear sides. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, cutting diameter 570 mm saw band length 7250 x 41 mm cutting width 1,3 mm capacity 90 degrees: square 550 x 550 mm capacity 90 degrees: flat 550 x 700 mm total power requirement 4 kW weight of the machine ca. 6050 kg required space 2600 x 1300 x 3700 m The KLS 550 x 700 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications Gusdpfx Aoymf Sdef Tja - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 0-250-05-3373, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 4,035 mm, travel distance Y-axis: 1,720 mm, travel distance Z-axis: 380 mm, Equipment: documentation/manual, We are offering this impeccable and ready-to-use Weeke Optimat BHC 550 machining center, year of manufacture 2001. Manufacturer: Weeke Model: Optimat BHC 550 Year: 2001 Condition: ready for operation Category: machining center The machine is connected and in demonstration-ready condition. We recorded a demonstration mode video a few days ago that shows the machine operating error-free. We will be happy to send you this video via WhatsApp upon request. Gjdpfxjyvkygj Af Teua It is equipped with woodWOP 8.0 Version 6.0.71 / 8.0.231.0 (32-bit). Scope of delivery additionally includes: - All required guards and safety fencing - Control cabinet with accessories - BECKER KVT 3.100 vacuum pump - Termo-Tec laser cooling unit Thermochiller 1kW, Type P601-015 - All documentation, operating manual, circuit diagrams If you have any questions or require further information, please feel free to send us a message or give us a call. All information provided without guarantee.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Panel Saw FKS 550-3200 M A PRO, - Year of manufacture: 2023 - Max. cutting height: 200 mm - Cutting height: 200/140 mm - Crosscut width to the left of the saw blade: max. 3200 mm - Rip cutting width with parallel fence: 1450 mm - Saw blade tilt: 90 – 45° - Dimensions (LxWxH) in mm: 3,386 x 3,703 x 1,330 - Main saw blade with belt drive, speeds: 2800/3665/4800 rpm - Vibration-free operation due to high net weight (1,070 kg) - Large extension table with material roller - Parallel fence with round bar guide - Extendable aluminium longitudinal fence with digital display (2 flip stops) - Four-way ball-bearing format sliding table with double roller carriage made of anodised aluminium, highly torsion-resistant - Large pendulum safety guard with gas spring - Multiple locking positions on the sliding table - Motorised saw blade tilt & height adjustment with digital display - 8.8 kW main motor - Saw blade clamping via tool-free rapid system - Saw assembly can be switched on and off - On/off switch on the sliding carriage - Edging length 3200 mm Guodpjxfku Tofx Af Tja Transport available at extra cost!

Condition: used, mileage: 840,000 km, power: 220 kW (299.12 HP), first registration: 01/2008, fuel type: diesel, number of seats: 53, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, Mercedes-Benz Integro O 550 Vehicles with minor technical and visual defects (rust) 2 identical vehicles available * MB engine 220 kW Euro 5 * ZF automatic transmission Godpfx Afsyvnbnj Tsua * ABS, ASR * Automatic climate control * Webasto auxiliary heater, preselectable * 51+1+1 high-back seats with seat belts and armrests * 41 standing places * 4 folding seats with seat belts * Overhead luggage racks * Door 2 double-width * Space for wheelchair * Radio, CD MP3, microphone * Matrix LED displays on 3 sides with GORBA CU5 control unit * Wiring prepared for interior display * Fare table * 2 electrically operated roof hatches * Luggage compartment with lighting * Night lighting * Stop request buttons * Grab rails * Retarder * Fog lights * Electrically adjustable, heated exterior mirrors * Driver's seat air-suspended, 3 air chambers * School bus transmission control * Bus stop brake * Wheel covers * 100 km/h approval All details provided without guarantee. Vehicle inspection possible at any time by prior appointment! More info: also via WhatsApp Polish-language info: WhatsApp Your French-speaking contact: Georges Spengelin

Condition: used, mileage: 877,100 km, power: 220 kW (299.12 HP), first registration: 01/2008, fuel type: diesel, number of seats: 53, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, Mercedes-Benz Integro O 550 Vehicles with minor technical and optical defects (rust) * MB engine 220 kW Euro 5 * ZF automatic transmission * ABS, ASR * Automatic climate control * Webasto auxiliary heating, pre-selectable * 51+1+1 high-back seats with seat belts and armrests * 41 standing places * 4 folding seats with belts * Overhead luggage racks * Door 2 double-width * Wheelchair space * Radio, CD MP3, microphone * Matrix LED displays on 3 sides with GORBA CU5 control unit * Preparation for internal display * Fare desk * 2 electrically operated roof hatches * Luggage compartment with lighting * Night lighting * Stop request buttons * Grab rails * Retarder * Fog lights * Electrically adjustable and heated exterior mirrors * Air-suspended driver’s seat with 3 air chambers * School bus operation mode * Bus stop brake * Wheel trims * 100 km/h road approval Gedpex Sugpefx Af Tsua All information without guarantee. Inspection possible at any time by prior appointment! Further info: also via WhatsApp Information in Polish: WhatsApp Your French-speaking contact: Georges Spengelin

Condition: used, mileage: 477,430 km, power: 260 kW (353.50 HP), first registration: 11/2014, fuel type: diesel, number of seats: 56, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, +++Original mileage+++ +++Wheelchair lift+++ +++Minor collision damage+++ Engine: Mercedes Benz AdBlue Emission standard: Euro 6 Transmission: Automatic Seats: 55+1 high/fixed with lap belts Standing places: 16 _____ Safety * Retarder * Cruise control * ABS, ESP, EBS * Fog lights * Immobilizer * Brake assist Passenger compartment * Auxiliary heater * Automatic climate control * Luggage racks * Double glazing * Driver's microphone * Space for pram * Wheelchair space Exterior * Matrix Gorba * Extra-wide center door * Lifting/lowering system * Power steering * Tachograph with card * Sun visor * Electrically adjustable exterior mirrors * Roof hatches, fans, roof ventilators Gsdpfx Ajul Ncisf Tsua Audio & communication * Radio / CD * USB port Miscellaneous * Vehicle dimensions: Length: 13.35 m, Width: 2.55 m, Height: 3.35 m * Twin tires * Tyre condition: 60% Our internal vehicle number: 9414 Subject to errors. Images and text may differ from the actual vehicle. Over 300 vehicles constantly available in stock.

Condition: new, Year of construction: 2025, saw blade diameter: 550 mm, input voltage: 400 V, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - double miter - 4 pneumatic clamps - Hydrocheck system Gedpfxshzuu No Af Toua - mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - blowgun - protective cap - documentation - 400V

Condition: new, saw blade diameter: 550 mm, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - Double miter - 4 pneumatic clamps - Hydrocheck system - Mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Blow gun - Protective cap Gsdsrh Dkyjpfx Af Teua - documentation - 400V

Condition: used, Year of construction: 2012, CNC machining center Manufacturer: Unverzagt Model: UVA 550 Plus Year of manufacture: 2012 Control system: Siemens 828D Guodpfx Aowv Tm Nsf Tsa Operating hours: approx. 3,000 Travel range X/Y/Z: 600 x 400 x 500 mm Tool changer positions: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Hexagon wireless probe Chip conveyor Spindle chiller IKZ (internal coolant supply) 17326ä

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 2506A-E15TAG2, General information Field of application: Construction Gsdox S Umispfx Af Tsua Weights Empty weight: 5.071 kg Functional Generator capacity: 550 kVA CE mark: yes Other information Fuel consumption: 73.6 L/Hour at 75% Load Prime Generator: FG Wilson FG29A400 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 888 l Transport dimensions (LxWxH): 4,93x1,66x2,317 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, fuel type: diesel, power: 440 kW (598.23 HP), motor manufacturer: Perkins 2506A-E15TAG2, General information Field of application: Construction Weights Empty weight: 3.699 kg Functional Generator capacity: 550 kVA CE mark: yes Other information Guedpfx Aoxpg U Djf Tsa Fuel consumption: 73,6 L/Hout at 75% Load Prime Generator: FG Wilson FG29A400 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 888 l Transport dimensions (LxWxH): 3,8x1,131x2,215 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Tank

Year of construction: 2025, condition: used, New: Yes Empty weight: 110 kg Guedpfx Aeu Hflqef Tea CE mark: yes Serial number: DPX-27509 Transport dimensions (LxWxH): 0,6x0,4x1 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information

Condition: new, Year of construction: 2025, machine/vehicle number: 20132451373, fuel type: diesel, power: 440 kW (598.23 HP), motor manufacturer: Volvo TAD1346GE, General information Field of application: Construction Weights Empty weight: 4.860 kg Functional Generator capacity: 550 kVA CE mark: yes Other information Fuel consumption: 76.7 Liter/Hour at 75% Load Generator: Stamford HCI544D1 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 900 l Transport dimensions (LxWxH): 4,31x1,5x2,4 Production country: TR Gusdpfx Asxvk Inof Toa Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2026, fuel type: diesel, power: 440 kW (598.23 HP), motor manufacturer: Scania DC16, General information Field of application: Construction Functional Guodpfxjwtwlwo Af Tja Generator capacity: 550 kVA CE mark: yes Other information Generator: Stamford HCI544C Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 310 l Transport dimensions (LxWxH): 5x1,9x2,35 Production country: IT Additional information Please contact Ronald van der Laar, Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2024, machine/vehicle number: 20221021019, fuel type: diesel, motor manufacturer: Iveco CR13TE7W.S550, General information Field of application: Construction Weights Empty weight: 4.200 kg Functional Generator capacity: 550 kVA CE mark: yes Other information Fuel consumption: 80.2 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Gedpfsxbwv Ajx Af Tsua Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 800 l Transport dimensions (LxWxH): 4,5x2x2,4 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: 20250214003, fuel type: diesel, motor manufacturer: Cummins QSZ13-G3, General information Field of application: Construction Weights Empty weight: 4.950 kg Functional Generator capacity: 550 kVA CE mark: yes Other information Gjdpfexfpr Rex Af Teua Fuel consumption: 74.2 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 775 l Transport dimensions (LxWxH): 4,25x1,6x2,45 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, fuel type: diesel, power: 440 kW (598.23 HP), motor manufacturer: Cummins QSZ13-G10, General information Field of application: Construction Weights Empty weight: 5.350 kg Gsdpfx Aowddwnef Tsua Functional Generator capacity: 550 kVA CE mark: yes Other information Fuel consumption: 77.1 Liter per Hour at 75% Load Generator: Stamford S5L1S-D4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 995 l Transport dimensions (LxWxH): 4,515x1,78x2,62 Production country: PT Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: good (used), Year of construction: 2012, operating hours: 16,060 h, load capacity: 2,500 kg, lifting height: 5,500 mm, fuel type: gas, mast type: triplex, construction height: 2,400 mm, Mitsubishi FG25N Triplo 550 Freelift / Sideshift LPG 2012 Video can be sent via Whatsapp. Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. offers a variable stock of machines, trucks, trailers and attachments. Gjdpfjyt Rh Rsx Af Teua All our units are sold at trade prices under AS-IS conditions without warranty. (see our general terms and conditions) You can make a viewing appointment and/or test drive without obligation. Please call ahead as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland