Used Masturn 550 for sale (2,705)

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 50810087309654, enginetype: Electric, manufacturer: Club Car Nksdpfxsw Rzd Rs Ab Uow

Condition: excellent (used), Felder kappa 550 panel saw, format 4 Nedpfx Aox Swzvob Uokw Sliding table 320 cm, Blade tilt and height adjustment motorized, Right-hand fence motorized adjustable up to 1600 mm, Main motor 7.35 kW, Max blade diameter 500 mm Used machine, in very good condition.

Year of construction: 2013, condition: ready for operation (used), A Rösler continuous belt shot blasting system is available. Rated power: 72kW, abrasive filling quantity: 1500kg, blasting capacity: 600kg/min, blast wheels: 4, blast wheel type: H28HM, total system dimensions X/Y/Z: approx. 12400mm/3800mm/2300mm, max. single component weight: 6000kg. Documentation available. An on-site inspection is possible. Nkjdpfeyi E Epjx Ab Usw

Year of construction: 2007, condition: used, Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20°C / +230°C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Nksdpfxjx R Aq Ts Ab Uew Documentation available Sold with protective cover.

Condition: used, Year of construction: 1986, functionality: fully functional, heating capacity: 1,500 kW (2,039.43 HP), nominal heat output: 1,500 kW (2,039.43 HP), operating pressure: 6 bar, pressure: 6 bar, Equipment: documentation/manual, hot water, We are offering this used MAWERA FU 1300 RA heating system, year of manufacture 1986. Includes control cabinet, flue gas cleaning, and induced draft fan. Model: FU 1300 RA Year: 1986 Nominal heat output: 1,500 kW Permissible operating overpressure: 6 bar Permissible flow temperature: 120°C Price: €5,000 We are also offering a used MAWERA FU 550 RIA heating system, year of manufacture 2001. Model: FU 550 RIA Year: 2001 Nominal heat output: 550 kW Permissible operating overpressure: 6 bar The FU 550 RIA has already been dismantled. Nkodpfx Asykmd Aob Ujw Price: €4,500 In addition, the shared push floor discharge system with twin auger and hydraulic power unit, as well as an Eder pressure maintenance and degassing system, are available for sale. Dimensions of the system can be found in the pictures. Prices apply to the boilers only. The system is still in operation and can be inspected at any time. Scheduled dismantling date: mid-May 2026. Dismantling by the seller is possible; dismantling costs will be charged separately. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2009, condition: good (used), Spring balancer, cable pull-out, reel, spring cable drum, spring cable drum, spring drum -Manufacturer: Conductix Wampfler, spring drum spring cable reel -Type: BEF 325524-0404-2DI (T)H/L -Current: 3x25A PE -Voltage: 415V -Protection class: IP65 -Cable: not included Njdpfxjx R Svlj Ab Uekw -Dimensions: Ø 550 x 440 mm -Own weight: 32 kg

Year of construction: 1995, condition: ready for operation (used), A complete vibratory finishing system Rösler, consisting of several components, is available. 1) Trough-type system Rösler R 550/4600 DA, connected load: 15kW, weight: approx. 6000kg. 2) Water treatment centrifuge Rösler Z 600 ASS-1-Turbo. 3) Conveyor belt Rösler R 360/4100 FB/S, belt length: 8220mm, width: 379mm, weight: approx. 400kg. 4) Conveyor belt Rösler R 360/2800 FB/T, belt length: 5650mm, width: 379mm, weight: 230kg. 5) Discharge belt Rösler R 600/2000 FB/T, belt length: 4050mm, width: 620mm, weight: approx. 310kg. Documentation available. An on-site inspection is possible. Nkjdpjw Exr Nofx Ab Uew

Condition: as good as new (ex-display), Year of construction: 2024, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 200 mm Scorer: yes Height adjustment saw blade: motorized Pivot adjustment saw blade: motorized Width stop adjustment: manual Display saw blade angle: digital Display cutting height: digital Display width stop: scale Nodjkuzd Hspfx Ab Ujkw Display cutting ruler: scale Saw blade diameter: 550mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7,5 kW Motor brake: yes / automatic Suction connection: 100mm and 120mm machine length: 3600mm Machine width: 2000mm Weight: 1000kg

Condition: used, machine/vehicle number: 16767, Year of construction: 2017, operating hours: 6,747 h, load capacity: 1,000 kg, lifting height: 7,280 mm, load center: 600 mm, fork length: 1,000 mm, enginetype: Electric, manufacturer: Jungheinrich Nkjdpsyihh Dofx Ab Ujw

Condition: used, Centrifugal pump, water pump, stainless steel pump, food pump, peripheral impeller pump, coupling housing magnetic coupling centrifugal pump, motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump carrier -Manufacturer: KTR, pump housing clutch housing -Type: PL 550/1/ -Dimensions: see photo dimensions -Quantity: 2x housing available Nedpfxjt U Tqpo Ab Ujkw -Price per piece -Dimensions: Ø 550 x 270 mm -Weight: 12 kg/piece

Condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, circular table saw, circular saw -Manufacturer: White Paisley, table saw on solid base -Motor power: 6.3 kW / 1430 rpm -Saw blade: Ø 550 mm -Max. Cutting height 180 mm -Cutting width: up to 455 mm -Table height: 850 to 1000 mm Nsdei I Hc Uepfx Ab Uekw -Chip extraction: Extraction system can be supplied at an additional cost -Dimensions 1240/1100/H1500 mm -Weight: 762 kg

Condition: used, Radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, , , ventilation fan, blower -Fan: centrifugal fan exhaust fan -Type: unfortunately without type designation -Voltage: 380V/3ph. / separate windings -Speed: 550 / 750 rpm -Inlet: Ø 220 mm -Air duct connection: 190 x 145 mm -Dimensions: 410/380/H190 mm -Weight: 10 kg Nkjdjq Dau Tepfx Ab Ujw

Condition: good (used), Gearbox, spur gear, worm gear Nkjdpfxot Trwro Ab Uow -Gearbox: Flat gearbox, unfortunately without type designation -Part No.: R 8 395-2 -Translation: 2-stage 1:8 / 1:2 counter-rotating -Shaft: Ø 45 x 55 mm / Ø 20 x 22 and 25 x 75 mm -Dimensions: 550/270/300 mm -Weight: 40 kg

Condition: good (used), Year of construction: 1956, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Meuser, lead screw and feed screw lathe type M3A -Turning length: 1400 mm Nkjdpfjh Uuzyox Ab Uow -Turning diameter over bed: 550 mm -Turning diameter without bed: 800 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 58 mm Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm Accessories: incl. tool holder/tools (see photos) -Tailstock mount: MK5 -Dimensions: 2770/1160/H1310 mm

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, screw jack -Fixators: for clamping plates / straightening plates, 6 pieces -Height: adjustable -Hole: Ø 40 mm -Price/Delivery: complete Nksdpsvz Smyjfx Ab Uow -Dimensions: Ø 340/H550 mm -Weight: 45 kg/piece

Condition: used, Clamping table, T-slot table, milling machine table, drilling machine table, boring machine table Nedpfoul H Eujx Ab Uskw -Clamping table: Drilling machine table Milling machine table T-slot table -Table surface: 800 x 550 mm, height 195 mm -Groove width: 28 mm, groove spacing 250 mm -Dimensions: see photo technical drawing -Total dimensions: 800/550/H195 mm -Weight: 630 kg

Condition: excellent (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, flat belt conveyor -Conveyor belt: Transport belt, stainless steel housing -Total conveyor belt width: 90 mm / 2 x 40 mm belt width -Conveyor belt length: 550 mm, dimensions see photos -Drive shaft: Ø 25 mm -Individual components: see photos Nkedpfxsxr Apcj Ab Uew -Overall dimensions: 600/500/H180 mm -Weight: 27.8 kg

Condition: good (used), Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 550 mm -Length extended: 1045 mm -Width: 14 mm/height: 39 mm Nkedov Rq D Aspfx Ab Uow -Price: per pair (left right) -Number: 3x pairs available -Weight: 2.6 kg/piece

Condition: used, machine/vehicle number: 217 0055/5, Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm Nksdpfoha Hvvox Ab Uow -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Condition: good (used), Trolleys, transport trolleys, wheelchairs, transport dog -Angle frame: 825 x 550 mm -Angle frame made of: stainless steel (VA) -Rolls: made of polyamide -Diameter: 160 mm -2 swivel casters and 2 fixed casters -Quantity: 24 pieces available Nksdpjb A Htiefx Ab Ujw -Price: per piece

Condition: good (used), Year of construction: 2010, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Interroll, belt conveyor type 4081 without drive -Belt width: 550 mm -Total conveying length: 650 mm -Drive shaft: Ø 20 x 100 mm -Number: 3 conveyor belts available Price: per piece Nkodsqw D Dtjpfx Ab Uow -Transport dimensions: 840/660/H130 mm -Weight: 33 kg/pc.

Condition: used, Shock absorber, gas spring, shock absorber, start-up damper, impact damper -Manufacturer: Bansbach, gas pressure spring easylift type HONOF42-550-1164-018 080N -Piston: Ø 22 mm -Total length: 1200 mm Nedetlzg Njpfx Ab Uskw -Piston rod: Ø 10 x 550 mm -Number: 37x gas pressure spring available -Price per piece -Dimensions: Ø 22 x 1200 mm -Weight: 0.9 kg/piece

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake Nkjdpoc Spnaefx Ab Uew -Tool for: wire mesh, mesh wire -Wire division: 50 mm -Thickness: 25 mm -Drawing with the pictures -Total length: 550 mm -Total height: 194 mm -Weight: 20 kg

Condition: used, Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Speed: 27 m/min Nkedpscpbwajfx Ab Usw -Drive: 0.6 kW -Belt width: 450 mm -Belt length: 2040 mm -Roller conveyor: powered -Roll width: 550 mm -Transport length: 960 mm -Rollers: Ø 31 mm -Roll distance: 40 mm -Height: 850 mm adjustable and tiltable -Transport dimensions: 3160/620/H850 mm -Weight: 354 kg

Condition: used, Stick electrodes 4.0 x 550 Nkjdpfx Abed Elvxe Usw -Type: FOX CM 2 Kb -Analysis: AWS A5.1 -Price: per package -Number: 40 packages available -Weight per package: 5.6 kg