Used Matsuura Hplus 300 for sale (49)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,756 h, functionality: fully functional, machine/vehicle number: 16252, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: FANUC 30i, workpiece weight (max.): 250 kg, TECHNICAL DETAILS Travel X-axis travel: 500 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Work Table Pallet size: 300 x 300 mm Nwedpfsxnwy Ijx Akcof Max. workpiece weight: 250 kg Rotary table: 360° x 0.001° Minimum/maximum spindle to table center distance: 120/620 mm Minimum/maximum spindle to table surface distance: 80/580 mm Max. workpiece size: 500 x 500 mm Spindle speeds: 50 - 15,000 rpm Spindle taper: ISO 40 Spindle drive power: 15/7.5 kW Feed rates X/Y/Z: 1 - 50,000 mm/min Rapid traverse: 50 m/min Rapid traverse B-axis: 33.3 rpm MACHINE DETAILS Control: FANUC 30i Total connected load: 38 kVA Weight: 10,000 kg Operating Hours Running time: 15,756 h Control on-time: 116,776 h

Condition: good (used), Year of construction: 2013, operating hours: 17,904 h, functionality: fully functional, machine/vehicle number: 19261, travel distance X-axis: 500 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 71, Geometry protocol available TECHNICAL DETAILS Control: Fanuc 30iM X travel: 500 mm Y travel: 560 mm Z travel: 500 mm Spindle-to-table distance: 80 - 640 mm Spindle Speed: 15,000 rpm Power: 15 kW Torque: 119 Nm at 1,200 rpm Tool holder: BT40 Spindle bearing inner diameter: 70 mm Spindle speed command: 5-digit direct S command Spindle alignment: electric Tool clamping force: 11.8 kN NC rotary table B-axis: 0.001° Nodjwm D Irjpfx Akcjwf Pallet size: 300 x 300 mm Table load (max.): 250 kg Workpiece size (max.): Ø530 x 760 mm Pallet clamping surface: (M12 x P1.75) x 32 Feed rate Rapid traverse speed (X/Y/Z): 60,000 mm/min Feed rate (X/Y/Z): 1 – 60,000 mm/min Jog feed rate (X/Y/Z): 0 – 4,000 mm/min Min. travel increment (X/Y/Z): 0.001 mm Min. travel increment B-axis: 1 degree Tool magazine Number of tool positions: 71 stations Max. tool diameter (with adjacent tools): 90 mm Max. tool diameter (without adjacent tools): 150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool selection: Fixed address system Tool change arm: W-gripper type Tool-to-tool change time: Dependent on tool weight Tool change time: Chip-to-chip Target value dependent Tool station spacing: 95.25 mm Automatic pallet changer (PC2) Number of pallets: 2 Change method: Rotary table Pallet change time (pallet-to-pallet): 6.5 s Total pallet change time: 7.0 s Pallet clamping force: 41.5 kN Max. pallet weight: 40 kg MACHINE DETAILS Machine height: 2,683 mm Footprint (not including maintenance area): 2,145 x 3,655 mm Machine weight: 8,300 kg Power supply: 50 kVA On-time: 51,149 h Program run: 30,722 h Machining time: 17,904 h Workpiece counter: 1,389 pieces EQUIPMENT - Chip management with Chip conveyor - Coolant system with paper belt filter and 70 bar high-pressure internal cooling (ICS) - Workpiece measurement with Renishaw OMP60 touch probe - Tactile tool breakage monitoring - 2-station pallet changer - Transformer - Flushing gun

Condition: good (used), Year of construction: 2004, functionality: fully functional, Model Year: 2004 Nwsdpfxox Tzn Ns Akcof Width: 500 mm Length: 500 mm Height: 500 mm Number of Axes: 4 Tool Holder: BT40 Spindle Speed (RPM): 15,000 Processable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 560 mm z-travel 500 mm Control Matsuura G-Tech 30i max. turning speeds 20.000 min/-1 number of tool places 210 Pos. total power requirement 52 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features: Nwedpfx Ajyigalekcof - 5-pallet changer - new spindle including ceramic ball bearings - new spindle cooler Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Fanuc G-Tech 16i, table length: 500 mm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table size: 500 mm x 500 mm MACHINE DETAILS CNC control: Fanuc G-Tech 16i Tool magazine: 120 stations Internal coolant: 70 bar EQUIPMENT 6-fold pallet changer 4th axis Knoll high-pressure system Nwedoy Atwuopfx Akcjf Note: The machine has already been dismantled.

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, number of axes: 4, This 4-axis Matsuura H plus 405 was manufactured in 2004. It features a pallet size of 500 × 500 mm, X/Y/Z-axis travel of 600 mm each, and a B-axis indexed at 1°. The spindle operates at 12,000 rpm with an ISO 40 taper. It includes a high-capacity tool magazine for 240 tools and supports 24 pallets with dual loading/unloading stations. Consider the opportunity to buy this Matsuura H plus 405 horizontal machining centre. Contact us for more information. • Pallet size: 500 × 500 mm • Number of pallets: 24 pallets • Loading/unloading stations: 2 • Tool magazine capacity: 240 tools • Probing system: Yes (touch probe) • Tool presetting: Yes • Tool breakage detection: Laser system • Spindle taper: ISO 40 (DIN 69871) • Spindle speed: 12000 rpm • High-pressure coolant: 50 bar with paper filter • Machine condition: Available for any test / under power Nsdpjx Utv Ujfx Akcowf

Condition: used, Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 400 kg, total height: 2,640 mm, total length: 5,870 mm, total width: 3,440 mm, overall weight: 11,300 kg, table length: 500 mm, table width: 500 mm, rotational speed (min.): 15,000 rpm, Equipment: documentation/manual, Horizontal machining centre CNC Control Matsuura G-tech 16i Pallet table size 500x500 mm Movement X-Y-Z-Axis 600x600x600 mm Magazin capacity 240 Nwedoydddmspfx Akcef Number of pallets: 6 Table load 400 kg Spindle speed 15000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture: 2008 Width: 600 Length: 600 Nedpex Tzmxefx Akcswf Height: 600 Number of axes: 4 Holder: SK40 Spindle speed (rpm): 15,000 Processable material types: Steel, Aluminium, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: good (used), Year of construction: 2004, functionality: fully functional, Year of manufacture: 2004 Nwodpfx Aksx Tzafocof Width: 600 Length: 600 Height: 600 Number of axes: 4 Tool holder: SK40 Spindle speed (RPM): 15,000 Processable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: excellent (used), Year of construction: 2015, operating hours: 43,000 h, functionality: fully functional, machine/vehicle number: 19978, travel distance X-axis: 660 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Fanuc, controller model: 30i, workpiece height (max.): 850 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 400 kg, operating hours of spindle: 7,000 h, spindle mount: MK 4, number of spindles: 1, This machine is an excellent production machine. For several reasons, we have to part with this machine earlier than planned, as we need to install a 5-axis machine in its place. Otherwise, we would certainly continue using it for many more years. Nodpoywgglofx Akcjwf

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 760 mm, travel distance Y-axis: 845 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 20,000 rpm, number of axes: 5, This 5-axis Matsuura MAM 72-63 V was manufactured in 2008. It features impressive travels with an X-axis of 760 mm, Y-axis of 845 mm, and Z-axis of 610 mm. The machine includes a maximum workpiece capacity of Ø800 mm × 450 mm height and a tool magazine with 150 positions. If you are looking to get high-quality machining capabilities, consider the Matsuura MAM 72-63 V vertical machining centre we have for sale. Contact us for further details. • Rotary axes: A +110° / -110°; C 360° • Table/work area: • Max workpiece: Ø800 mm × 450 mm height • Table to spindle nose: 120 – 730 mm • Feed rates: • Rapid traverse (X/Y/Z): 50,000 mm/min • Cutting feed (X/Y/Z): 1 – 50,000 mm/min • Accuracy: Minimum increment 0.001 mm • Tooling: Tool magazine with 150 positions • Other: Spindle hours 23,000 h Additional equipment • Twin pallet system • Workpiece probe Nsdpfjyzzq Hjx Akcowf • Tool probe • High-pressure coolant (50 bar) • Filtration system • Chip conveyor with drum filter

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 970312407, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 800 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, table width: 510 mm, table length: 1,150 mm, The milling machine is in really good condition and runs production every day. There is a 5th Nikken round drill on the machine, which works perfectly. There are approximately 90 BT40 tools included. Speed range: Max. 10,000 RPM Machine dimensions (L x W x H): 3200 x 2800 x 2497 mm Nedpfoy Exx Aex Akcjwf Weight: 6,600 kg Accessories/Special features: • CNC control YASNAC J300M • Screw chip conveyor • CE conformity • 30-station tool changer • Coolant system

Condition: good (used), Year of construction: 2010, operating hours: 78,572 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, overall weight: 12,000 kg, Special Equipment for the Machine: - 1 Extension of the tool magazine from the standard 30 tools to 210 tools, including preparation for 240 tools - 1 Pallet rotary storage system for 10 pallets, including setup station - Number of pallets: 10 - Pallet diameter: 130 mm - Pallet mounting: Capto C6 - Maximum workpiece size: Ø 250 x H 250 mm - Maximum workpiece weight: 40 kg - Pallet clamping force: 22.5 kN - 1 HSC main spindle 40 – 20,000 rpm with 7.5/11 kW motor - Maximum spindle torque: 70 Nm up to 1,500 rpm - Including weekly timer for initiating spindle warm-up cycle and automatic machine shutdown - 1 Spindle holder HSK 63A - 1 Direct path measuring system (Heidenhain) on X, Y, and Z axes, equipped with purge air - 1 KNOLL coolant system, consisting of: - Scraper-belt chip conveyor with lift pump, chip discharge to operator side - Coolant supply through the spindle with KTS25-50T pump, capacity 24 l/min at 70 bar, 5.5 kW - Coolant pressure adjustable in 3 stages - External coolant with coolant pump, capacity 100 l/min at 1.4 bar - Coolant shower with coolant pump, capacity 100 l/min at 1.4 bar - Compact filter KF200, filtering capacity 200 l/min - Dimensions (L x W x H): approx. 1.8 x 1.1 x 1.0 m Nedpoy Hrtcsfx Akcowf - Tank capacity: approx. 1,400 liters - 1 Cooling water recooler VWK 90 – D emulsion - Cooling capacity: 11.5 kW - Ambient temperature up to 42°C - Refrigerant: R407c - 1 Coolant spray gun in the working area, including pump and electrical installation - 2 Spiral screw conveyors - 1 TEBARON mechanical air filter TEB/BV2 for extraction of emulsion mist, oil mist, and smoke, consisting of: - 3-stage pre-filter pack - HEPA filter per DIN EN 60335-2-69 with BIA test certificate, separation efficiency >99.995% for particles ≥ 0.3μ - Meets category K1/K2 (carcinogenic substances and pathogens) and dust class H requirements - 1 Single support with base plate for ISI air filter TEB/BV2 - 1 RENISHAW OMP 60 probe for automatic workpiece zero-point setting and measurement, insertable into spindle via tool changer - Includes EASY PROBE SOFTWARE - Pressure gauge for tool length measurement and tool breakage monitoring Special Equipment for the Control: - 1 Increase in part coordinate systems from 6 to 54 - 1 Coordinate system rotation G68/G69 - 1 Chamfering and rounding of corners - 1 Automatic reference point transfer - 1 Resume contouring function - 1 Extension of macro variables from standard 100–149, 500–549 to 100–199, 500–999 - 1 IZ2/150NF HSC precision controller for simultaneous 5-axis machining, including: - Fast Data Server function - High-Speed Precision Contour Control - Nano Smoothing - Dynamic zero-point transfer, up to 8 different zero points available (G54.2) - TCPC Tool Center Point Control for 5-axis simultaneous milling (G43.4/G49) - Swivel cycle enables machining on an inclined work plane (G68.2/G53.1/G69)

Condition: good (used), Year of construction: 1998, Table size: 1150 x 510 mm Tool holder: BT 40 Travel distances: X-axis: 800 mm Y-axis: 510 mm Nwjdpeyyq Niefx Akcof Z-axis: 510 mm Speed range: max. 10,000 rpm Machine dimensions (L x W x H): 3200 x 2800 x 2497 mm Weight: 6,600 kg Accessories / Special features: • CNC control YASNAC J300M (comparable to "SIEMENS") • 30-station tool changer • Screw chip conveyor • Coolant system • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1994, Matsuura 3 axis machining center in very good condition. Can be inspected under power upon appointment and available for immediate delivery. More technical details in the pictures. X axis 1020 mm Y axis 510 mm Z axis 510 mm Distance from tabel to spindle end 200 mm Table working surface 1100 x 510 mm Table loading capacity 600 kg Max spindle speed 15000 rpm Max spindel torque 235 Nm Tool storage capacity 30 pieces Max tool length 300 mm Max tool weight 8 kg Type of tool holder BT40 Chip conveyor yes Nedpfewt Shaex Akcjwf Machine weight 6400 kg

Condition: used, Year of construction: 2015, operating hours: 12,440 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 185 mm, nominal power (apparent): 30 kVA, spindle speed (max.): 42,000 rpm, input voltage: 415 V, type of input current: three-phase, We are offering this used Matsuura LUMEX Avance-25 Hybrid Additive Manufacturing Machine, year of manufacture 2015. The Lumex Avance-25 is an excellent solution for those looking to enter the top tier of hybrid additive manufacturing. It combines laser sintering and milling in a single machining center. With this system, you can efficiently produce complex and precise parts while benefiting from the flexibility and versatility of additive manufacturing. Outstanding flexibility and design freedom characterize the 3D printing process, which the LUMEX series masters excellently. The Lumex unites Selective Laser Melting (SLM) and High Speed Milling (HSM). Both technologies are brought together in one hybrid machine with the LUMEX Avance-25. By merging laser sintering and high-speed milling, complete metal components can be manufactured on a single system. Details: Njdjy Drwvspfx Akcewf Year of manufacture: 2015 Spindle hours: 12,439 Laser hours: 3,476 Build size: 250 x 250 x 185 mm If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2012, x-travel 0760 mm y-travel 845 mm Nwodpfsywntgsx Akcef z-travel 760 mm Control 840DI Siemens table-size 500 x 500 mm feed 0- 60 m/min workpiece weight max. 350 kg type of pallet-changer 2 St. milling head speed 12000 U/min numbers of tools in magazin 320 tool taper 63 HSK A- axe (swivel) 30- 120 ° B- axe (turning) 360 ° total power requirement 83 kW weight of the machine ca. 15 t dimensions of the machine ca. 6 x 4 x 2,5 m 5 axes machining center with swivable and turnable table. Coontrol Siemens 840 DI. Machine will be supplied with many spare parts. Machine has cooling through spindle ans dust exhaust.

Condition: used, Year of construction: 2001, x-travel 660 mm y-travel 460 mm z-travel 500 mm table dimensions 940 x 460 mm Control Yasnac J300 Nedpfx Akjxxmmrecswf spindle tunring speed 12.000 U/min tool taper BT 40 number of tool places 30 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2016, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 19979, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 40 mm, feed length Y-axis: 40 mm, feed length Z-axis: 40 mm, nominal power (apparent): 75 kVA, torque: 191 Nm, controller manufacturer: Fanuc, controller model: G-Tech 31 iB, workpiece length (max.): 850 mm, workpiece width (max.): 850 mm, workpiece height (max.): 450 mm, workpiece diameter (max.): 850 mm, workpiece weight (max.): 500 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 90 bar, number of spindles: 1, number of slots in tool magazine: 60, mount diameter: 40 mm, tool length: 350 mm, tool diameter: 80 mm, tool weight: 10,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MX-850 Milling Machine – Year of Manufacture 2016 – Excellent Condition For sale is a reliable and high-performance MX-850 milling machine from 2016. The machine is in good, well-maintained condition and is fully operational. With approximately 14,000 operating hours, the machine has been regularly serviced and professionally used throughout. Particular mention should be made of the spindle, which runs exceptionally smoothly and is almost like new—ensuring precision and high machining quality. The MX-850 stands out for its robust construction, high accuracy, and versatile applications in daily production. It is ideal for a wide range of milling operations and perfectly suited for both single and series production. Equipment & Details: - Model: MX-850 - Year of manufacture: 2016 - Operating hours: approx. 14,000 h - Condition: good - Spindle: excellent run, nearly as new - Function: perfectly operational, ready for immediate use - Coolant system (Knoll) included - Chip conveyor included - Transformer included Scope of delivery note: The machine is sold without tools, holders, or LANG clamping system – only the machine itself and the above-mentioned peripherals are included. Njdpjy Dd Exofx Akcswf The machine has always been handled with care and regularly maintained. It is currently still in operation and can be inspected by appointment. If you are interested or have further questions, please feel free to contact us.

Condition: ready for operation (used), Year of construction: 2003, Movement X-Axis Movement 800 mm Y-Axis Movement 550 mm Z-Axis Movement 550 mm This 3-axis Matsuura V.PLUS-800 was manufactured in 2003. It features a spacious table of 1150mm x 550mm with a loading capacity of 500kg, and a robust spindle speed ranging from 40 to 12,000 RPM. Ideal for precise and heavy-duty machining. If you are looking to get high-quality milling capabilities, consider the Matsuura V.PLUS-800 machine we have for sale. Contact us for more information. Nwjdpfx Aox D I D Nekcef Application Types Milling

Condition: used, functionality: fully functional, Tool racks for Matsuura H.Plus300, H.Plus405 MAM72-63V, HG600, MAM72-3VS, etc. Various versions available: BT40 / SK40 Contact us for details! Nedpeyxtg Uefx Akcjwf

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Nwedolz Rvlepfx Akcsf Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2015, Traverses X Y Z; 630 x 560 x 510mm, A axis -125/+ 10 degrees, C axis 0.001 degrees, table size 300mm diameter, Maximum diameter 520mm, maximum workpiece height 350mm, spindle taper BT40, 90 station ATC, spindle speed 20,000rpm, Nodsyfv Dhspfx Akcswf Fanuc G-Tech 31I control, through spindle coolant and swarf conveyor, spindle probe.

Condition: used, Year of construction: 2017, travel distance X-axis: 435 mm, travel distance Y-axis: 465 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 80 kg, total height: 2,755 mm, total length: 3,360 mm, total width: 3,870 mm, overall weight: 8,500 kg, spindle nose: MAS BBT 40, 5-axis Vertical Machining Centre CNC Control Matsuura G-Tech 31 i Table size ø 130 mm Table load 80 kg Number of pallets 10 max workpiece dia x height 330 x 300 mm Njdpfsygw Dxsx Akcowf Movement X-axis 435 mm Movement Y-axis 465 mm Movement Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15.000 R/min Spindle taper MAS BBT 40 Spindle motor 7,5/5,5 kW Magazin capacity 90 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2011, condition: excellent (used), 5 axes machining center FANUC G-Tech 30i Working travels 550x410x450mm B-Axis table +/- 110° A-Axis table 360° Spindle taper BT40 Big Plus Spindle speeds -15000 rpm Tool changer 40 pos Nodogufmropfx Akcewf Palett places 2x Durchmesser 250mm Coolant through spindle 3D measuring probe Tool measuring device Paletts no 15 Tool holders approx 80x KNOLL / TURBO coolant device MARCELS MASCHINEN CH