Used Matsuura Cublex for sale (49)

Condition: used, Year of construction: 2005, x-travel 800 mm y-travel 550 mm z-travel 550 mm table dimensions 1.150 x 550 mm Control Matsuura G-Tech 30i spindle tunring speed 12.000 U/min tool taper BT 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant supply (ICS) - 4th axis (Nikken) Accessories, tools, and clamping devices shown are only included if Iaedpfsx U Em Eex Ahysl specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 1993, 2 pallet changers and 4th axis Year of manufacture: 1993 X-travel: 1,020 mm Y-travel: 560 mm Z-travel: 400 mm Table-to-spindle distance: 550 mm Control: Yasnac M80 Table size: 1,200 x 660 mm 2 pallets: 1 pallet with 2 Chick clamps – 1 pallet with 4th axis Tsudakoma RNCV201 Table load: 600 kg Tool holder: SK 40 Rapid traverse X-Y axes: 25,000 mm/min Rapid traverse Z: 15,000 mm/min Spindle speed: 200–20,000 rpm Motor power: 11/15 kW Tool magazine: 40 Internal coolant supply: 20 bar Coolant tank Timer Scraper conveyor Renishaw probe Spindle cooler Air cooler Iasdpfxswxbg Aj Ahyel Electronic handwheel Machine weight: 9 t Required space: approx. 7 m x 4.5 m x 2.85 m Total power requirement: 40 kVA

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, number of axes: 4, This 4-axis Matsuura H plus 405 was manufactured in 2004. It features a pallet size of 500 × 500 mm, X/Y/Z-axis travel of 600 mm each, and a B-axis indexed at 1°. The spindle operates at 12,000 rpm with an ISO 40 taper. It includes a high-capacity tool magazine for 240 tools and supports 24 pallets with dual loading/unloading stations. Consider the opportunity to buy this Matsuura H plus 405 horizontal machining centre. Contact us for more information. • Pallet size: 500 × 500 mm Ijdpsx Utv Uefx Ahysal • Number of pallets: 24 pallets • Loading/unloading stations: 2 • Tool magazine capacity: 240 tools • Probing system: Yes (touch probe) • Tool presetting: Yes • Tool breakage detection: Laser system • Spindle taper: ISO 40 (DIN 69871) • Spindle speed: 12000 rpm • High-pressure coolant: 50 bar with paper filter • Machine condition: Available for any test / under power

Year of construction: 2005, condition: used, Empty weight: 10.000 kg Dimensions (LxBxH): 220 x 270 x 250 cm Price: On request Lots of accessories! Includes - probe Includes - 3 vices - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 16286 Iasdpfx Ahexdc Szeyjl - Drive system: CNC - Power [kW]: 22.0 - Number of axes [pcs]: 2 - X-axis travel [mm]: 550 - Y-axis travel [mm]: 410 - Z-axis travel [mm]: 460 - Table length [mm]: 860 - Table width [mm]: 400 - Tool holder: BT40 - Max. spindle speed [rpm]: 15000 - Options: Probe - Transport dimensions: 2200mm x 2700mm x 2500mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2007, functionality: fully functional, MATSUURA MAM72-25 5 AXIS PALLET CHANGE MACHINING CENTER G -TECH 30i CONTROL 15 K SPINDLE RENISHAW SPINDLE PROBE SUPLIED WITH 4 PALLETS LANG VICES AND ZEROPIONT BASES . 3 JAW CHUCK AND COLLETS 15 BT40 TOOLS Iajdpfx Ahex U D U Ijyjl

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit Iaedshtryiopfx Ahyol -Manufacturer: Fanuc, Velocity Control Unit from machining center Matsuura MS-710 V -Type: A06B-6035- H422 H423 -Number: 2x servo module available -Price per piece -Dimensions: 500/260/H155 mm -Weight: 6.6 kg

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 22 [kW] - Spindle speeds : 12.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 630 x 560 x 510 [mm] - Rapid traverses rates (X/Y/Z) : 40.000 [mm/min] A ROTARY AXIS - Travel : -125 / +10 [°] - Indexing precision : 0,001 [°] - Rapid traverse rate : 17 [rpm] - C ROTARY AXIS - Travel : 360 [°] Isdpexylwljfx Ahyeal - Indexing precision : 0,001 [°] - Rapid traverse rate : 33 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 TABLE - Table dimensions : Ø300 [mm] - Maximum weight upon table : 200 [kg] - Max. turning diameter : 520 [mm] - Max. workpiece height : 350 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 63 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.851 x 2.260 [mm] - Machine height : 2.950 [mm] - Machine weight : 9.450 [kg] MACHINE HOURS - Number of hours under power : 10875 [h] - Number of working hours : 2027 [h] EQUIPMENT - CNC : Fanuc G-Tech 31iB - Interactive programming : Manual guide - Interface : RJ45 / PCMCIA - Option : 5 axes Package - Spindle option : POWER UP - Hydraulic predisposition with 6 channels in the center of the table - Linear scales - 3 colors status lamp - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Chips conveyor : LNS - Tool probe : BLUM - Electric transformer

Condition: used, functionality: fully functional, 4 pieces of Matsuura H-Plus 630 machine pallets, 800 x 800 mm, with hydraulic feed Iasdpfxsxn R Sks Ahyel

Condition: ready for operation (used), Year of construction: 2006, operating hours: 19,911 h, controller manufacturer: FANUC, controller model: 30 iM, total height: 2,250 mm, spindle speed (max.): 15,000 rpm, This 5-axis Matsuura MAM72-25V was manufactured in 2006. Ideal for complex and precise machining tasks, this vertical machining center offers enhanced flexibility and productivity for your manufacturing needs. Consider the opportunity to buy this Matsuura MAM72-25V vertical machining center. Contact us for more information. Additional equipment • Tool changer with 40 stations (chain) • Pallet changer for 2 pallets, 130 mm diameter • Replacement pallets Capto C6 • KNOLL coolant system with coolant supply through the spindle and pump KTS25-50T / Coolant shower with a capacity of 100 l/min at 1.4 bar • 2 spiral chip conveyors • Renishaw measuring probe OMP60 / Renishaw laser system TRS-1 Iaodpfx Aex D Shrjhyol • Rotating viewing window, electric / For the control: programmable mirror, coordinate system rotation, IZ2/150NF HSC precision control for simultaneous 5-axis machining • CE mark Machine Benefits Technical Machine Benefits • Direct position measuring system via rotary encoder for b and c axes • Spindle and spindle motor were last replaced in 2018 Dimensions Machine Depth 2200 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller model: Matsuura G-Tech 30i, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -220 °, swivel angle B-axis (max.): 220 °, TECHNICAL DETAILS X-axis: 550 mm Y-axis: 410 mm Z-axis: 450 mm B-axis: ±220° C-axis: 360° CNC control: Matsuura G-Tech 30i Spindle and tool Speed range: 20,000 rpm Tool holder: BT40 Tool length: 300 mm Tool diameter: 150 mm Tool weight: 10 kg Workpiece capacity Workpiece diameter: 300 mm Workpiece weight: 40 kg MACHINE DETAILS Machine dimensions (W x H x D): 3,032 × 5,120 × 2,705 mm Iajdpfx Aev Rb Hhjhyol Power consumption: 32 kVA EQUIPMENT - Internal cooling system - Automatic pallet changer - Automatic Tool changer - High-pressure cooling 20 bar - Chip conveyor - FSE chip control

Condition: used, Year of construction: 2006, functionality: fully functional, MATSUURA MAM72-35V 5 AXIS 32 PALLET MACHINING CENTER G-TECH 16i CONTROL 2006 MACHINE Supplied with 20 BT 40 tools and 5 pallets 15 k Spindle . Iaedpfxex U D Twe Ahyol £65k plus vat.

Condition: good (used), Year of construction: 2010, operating hours: 78,572 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 500,000 m/min, feed rate Y-axis: 50,000 m/min, feed rate Z-axis: 50,000 m/min, overall weight: 12,000 kg, Special Equipment of the Machine 1. Extension of the tool magazine from the standard 30 tools to 210 tools, incl. preparation for 240 1. Pallet round storage for 10 pallets, incl. setup station, Number of pallets: 10, Pallet size: D 130 mm, Pallet interface: Capto C6 Max. workpiece size: D 250 x H 250 mm Max. workpiece weight: 40 kg Pallet clamping force: 22.5 kN 1. HSC main spindle 40 – 20,000 rpm with 7.5/11 kW motor, Max. spindle torque: 70 Nm up to 1,500 rpm, Including weekly timer for starting the warm-up cycle and automatic machine shutdown 1. Spindle interface HSK 63A 1. Direct travel measuring system (Heidenhain) on X, Y, and Z axes, supplied with purge air 1. KNOLL coolant system, consisting of: - Scraper belt chip conveyor with lift pump and chip discharge to operator side - Through-spindle coolant supply with KTS25-50T coolant pump, 24 l/min at 70 bar, 5.5 kW Coolant pressure switchable in 3 stages - External cooling with coolant pump, 100 l/min at 1.4 bar - Coolant shower with coolant pump, 100 l/min at 1.4 bar - Compact filter KF200, filter capacity 200 l/min Overall unit dimensions (L x W x H): approx. 1.8 x 1.1 x 1.0 m Tank volume: approx. 1,400 liters 1. Cooling water recooler VWK 90 – D emulsion Cooling capacity: 11.5 kW Ambient temperature up to 42°C Refrigerant: R407c 1. Coolant spray gun in the working area including pump and electrical installation 2. Spiral chip conveyors 1. TEBARON mechanical air filter TEB/BV2 for extraction of emulsion, oil mist, and smoke, consisting of: - 3-stage prefilter pack - HEPA filter according to DIN EN 603335-2-69 with BIA test certificate, separation efficiency > 99.995% for particles ≥ 0.3μ. - Fulfills requirements for application categories K1/K2 (carcinogenic substances and pathogens) as well as dust class H. 1. Single support with base plate for ISI air filter TEB/BV2 1. RENISHAW OMP 60 probe for automatic zero point setting and workpiece measurement, can be changed into the spindle via tool changer: Including EASY PROBE SOFTWARE Pressure sensor for tool length measurement and tool breakage monitoring Special accessories for the control system 1. Increase in workpiece coordinate systems from 6 to 54 1. Coordinate system rotation G68/G69 1. Chamfering and rounding corners 1. Automatic zero point tracking 1. Contour re-approach 1. Extension of macro variables from standard 100–149, 500–549 to 100–199, 500–999 1. IZ2/150NF HSC precision control for simultaneous 5-axis machining, consisting of: - Fast Data Server function - High-Speed Precision Contour Control - Nano Smoothing - Dynamic zero point tracking (up to 8 different zero points available, G54.2) Ijdpfxoxwm Adj Ahyeal - TCPC (Tool Center Point Control) for 5-axis simultaneous milling (G43.4/G49) - Swivel cycle enables machining on an inclined working plane (G68.2/G53.1/G69)

Year of construction: 2004, condition: good (used), Traverses X Y Z; 680 x 394 x 625mm, B axis -110/+ 65 degrees, C axis 0.001 degrees, pallet diameter 130mm, maximum workpiece diameter 300mm, maximum workpiece height 250mm, number of pallets 40, spindle taper BT40, 240 Station ATC, spindle speed 12000rpm, Fanuc G-Tech 16I control, through spindle coolant, and swarf conveyor. Iedpfx Ahom H Uyzoyjal

Year of construction: 2003, condition: excellent (used), Control: Fanuc/Matsuura i30 G-Tech X 500 mm Y 500 mm Z 500 mm Spindle revolutions 15000 rpm 240 ATC Pallets 300 x 300 mm Nos. pallets 5 Ijdpfepwbfkox Ahysal SK40 IKZ 25-50 bar Measuring probe Tool breakage monitoring KSS cooling New spindle in 7/2022. Spindle hours 4800 h April 2021 - tool spindle spindle motor renewed May 2021 - changer arm of ATC repaired July 2022 - tool spindle + motor renewed November 2022 - ATC drive repaired. The ATC, automatic tool changer, has been completely retrofitted. The housing is the original, the wear parts like e.g. bearing, lever, cam discs etc. have been renewed. Machine is in very good working condition and partly retrofitted. It can be inspected working under power. Technical indications, subject to error.

Condition: ready for operation (used), Year of construction: 2003, Movement X-Axis Movement 800 mm Y-Axis Movement 550 mm Z-Axis Movement 550 mm This 3-axis Matsuura V.PLUS-800 was manufactured in 2003. It features a spacious table of 1150mm x 550mm with a loading capacity of 500kg, and a robust spindle speed ranging from 40 to 12,000 RPM. Ideal for precise and heavy-duty machining. If you are looking to get high-quality milling capabilities, consider the Matsuura V.PLUS-800 machine we have for sale. Contact us for more information. Application Types Isdpfx Ahjx D I D Njysal Milling

Condition: good (used), Year of construction: 2002, functionality: fully functional, Year of manufacture: 2002 Width: 1000 mm Length: 400 mm Height: 700 mm Ijdpfxsx Uwr Te Ahyjal Number of axes: 5 Tool holder: SK50 Spindle speed (rpm): 15,000 Machineable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: good (used), Year of construction: 2003, Machining Centre Manufacturer: Matsuura Model: H Plus 405 PC6 Year of manufacture: 2003 Ijdsltlx Njpfx Ahyjal CNC control: Fanuc G-Tech 16i Travel (X/Y/Z): 600 x 600 x 600 mm Table size: 500 x 500 mm 6-position pallet changer Tool magazine: 120 positions 4th axis Knoll high-pressure unit Internal coolant 70 bar 101225ä

Condition: used, Year of construction: 2001, x-travel 660 mm y-travel 460 mm z-travel 500 mm table dimensions 940 x 460 mm Control Yasnac J300 spindle tunring speed 12.000 U/min tool taper BT 40 number of tool places 30 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Iasdpfx Asxxmmrehyol Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 7800 mm Measurements depth 4700 mm Measurements height 3200 mm Machine weight 12300 kg Main Drive Spindle speed range 12000 Isdpfjx D Rv Ujx Ahyoal Number of axis 5 Workpiece Workpiece weight 60 kg Tools Max weight 10 kg Additional Equipment High precision machining for complex parts Enhanced productivity due to high-speed spindle and rapid movements Environmentally friendly and safe design with low noise levels Advanced control system features to maintain accuracy and reduce downtime This 5-axis Matsuura MAM72-35V was manufactured in 2021, designed for high-precision, complex machining. Features include a high-speed spindle up to 12,000 rpm, a 60-slot tool changer with rapid tool change time, and robust construction for handling diverse materials. Ideal for demanding sectors like aerospace and medical. If you are looking to get high-quality milling capabilities consider the Matsuura MAM72-35V machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2000, functionality: fully functional, Model Year: 2000 Width: 700 Iodpfex Uphmjx Ahysal Length: 400 Height: 500 Number of Axes: 5 Holder: BBT40 Spindle Speed (RPM): 20,000 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 4240 mm Measurements depth 8200 mm Measurements height 3400 mm Machine weight 19000 kg Main Drive Number of axis 5 Workpiece Isdox D Rv Iepfx Ahysal Workpiece weight 500 kg Tools Max weight 10 kg This 5-axis Matsuura MAM72-70V was manufactured in 2021, designed for high-precision, complex part production in one setup. It features a 15,000 rpm spindle, optional 20,000 rpm, and BBT #40 taper for robust performance. The machine includes a 90-tool magazine, rapid tool change capabilities, and dual pallet system for enhanced productivity. Ideal for industries requiring utmost precision and efficiency. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2000, functionality: fully functional, Model Year: 2000 Width: 700 Length: 400 Height: 500 Number of Axes: 5 Holder: BBT40 Spindle Speed (RPM): 20,000 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK Iaodpfx Ahex T Dipjysl

Condition: good (used), Year of construction: 2004, functionality: fully functional, Model Year: 2004 Width: 500 mm Length: 500 mm Height: 500 mm Number of Axes: 4 Tool Holder: BT40 Spindle Speed (RPM): 15,000 Isdox Tzn Njpfx Ahysal Processable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture: 2008 Width: 600 Length: 600 Height: 600 Ijdpfxox Tzmxe Ahyjal Number of axes: 4 Holder: SK40 Spindle speed (rpm): 15,000 Processable material types: Steel, Aluminium, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: good (used), Year of construction: 2004, functionality: fully functional, Year of manufacture: 2004 Width: 600 Length: 600 Height: 600 Isdpfx Ahox Tzafeyoal Number of axes: 4 Tool holder: SK40 Spindle speed (RPM): 15,000 Processable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK