Matsuura h plus 630 for sale
MATSUURA HPLUS 300 for sale with manufacturing year 2012.
Machine was used only for very light cutting, and very light material.
It was working in serial production.
Machine was completely checked mechanically and electrical.
Following parts are replaced with NEW parts:
- Linear guide ways X & Z Axis; Ball Screw Z & Y ; Complete revision for the spindle including warranty.
Our SERVICE team can install machine in customer facility..
Travel: X / Y / Z mm 500 / 560 / 500
Travel: B Axis deg 360
Nu... more
|
Horizontal machining center Matsuura H.Plus-405
Manufacturer: Matsuura
Type: H Plus 405
Year of construction: 2002
Control: FANUC MATSUURA G TECH 16i
Bwvihn9
X-axis: 600.0 mm
Y-axis: 600.0 mm
Z-axis: 600.0 mm
Number of pallets: 2
Pallet length: 500.0 mm
Pallet width: 500.0 mm
Workpiece weight: 400.0 kg
Loading weight on the pallet: max. 400 kg
Workpiece size: max. ø 650 x 750 mm
Number of tool changers: 80
Spindle cone: 40
Spindle speed: 12000 rpm
Spindle motor power: 18.0 kW
Max. Tool diam... more
|
CNC Machining Center MATSUURA Maxia H. Plus 405 Year 2013 with a 6-pallet circular memory control Siemens 840DiX-axis 660 mmY-axis 660 mmZ-axis 660 mmSpeed spindle: 40 - 12000 rpm. (Opt. 20000)Horizontal machining centre with pallet round storage for 6 pallets 500 x 500 mmPrecision NC rotary tableDistance measuring system HeidenhainHSK 63Magazin with 320 placesKnoll Coolant system with 70 bar/31 lpm, LTA air filter Tool breakage monitoringRenishaw button OMP 60Coolant spray gun for work area and... more
|
Manufacturer: Matsuura
Type: H-Plus 405
Built: 12/2011
Bfbtgleuo0
Controls: Matsuura Fanuc G-Tech 30i
Pallet size: 500 mm x 500 mm
X-Axchse: 600 mm
Y-axis: 600 mm
Z axis: 600 mm
B - 360 x 0001 degrees
Maximum workpiece size: 750 mm x 650 mm
Maximum pallet load: 400 kg
Tool holder: BT 40
Spindle speed: max. 12,000 rpm.
Number: Tool changer: 70 stations
ICZ 70 bar
Accessories: chip conveyor, coolant system more
|
Rotary vane vacuum pump Oelumlaufgeschmiert
Manufacturer: Busch
Type: R5 RA 0630 B
Status: Waiting, very good condition, second-hand
Warranty: 6 months suction capacity: 630 m ³/h
Glux3ed
Beriebsmittel: Mineral oil
Accessories: inlet filter
Delivery time: In stock more
|
-the maximum module: 14-minimal module: 1.5
-the maximum diameter of the gear: 630 mm
-table diameter: 650 mm
maximum table load: 800 mm
-the maximum angle of ground teeth: 45 on
-min/max number of teeth: 12/150 PCs
-total power requirement: 14 kW
-dimensions: 3000 x 4200 x 3600 mm
Bdmxcqdmza
-weight: 10800 kg more
|
Großhansdorf, Germany
![]()
dealership location
6490 km
2006
used
control Siemens 840 DI
x-travel 800 mm
y-travel 550 mm
Bfxlrh87dl
z-travel 500 mm
distance spindle center to column 590 mm
pallet:
working range on pallet 1150~550 mm
carrying capacity of pallet 300 kg
type of pallet-changer 2 - fach
change time of pallets 11 s
spindle:
spindle tunring speed 40~20000 U/min
spindle cone HSK 63
tool changer:
number of tool places 30 Pos.
tool taper HSK 63
max. tool diameter 96 mm
max. tool-dia with free toolbox 175 mm
max. tool length 101,6 mm
max. tool ... more
|
Kaiserslautern, Germany
![]()
dealership location
6526 km
2006
ready for operation (used)
Control Unit
Brand FANUC
Model 30i
Main Drive
Spindle speed range 15000 rpm
Spindle motor power 15 kW
Movement
X-Axis Rapid Traverse 550 mm
Y-Axis Rapid Traverse 450 mm
Z-Axis Rapid Traverse 500 mm
Tools
Slots in storage 30
Media
Bfavdxoyr3
Chip conveyor Yes
Internal cooling Yes
This Matsuura 550 V-Plus Vertical Machining Center was built in the year 2006 in Japan and has a production history of 8469 working hours. Equipped with a Fanuc 30i Control unit, this machine can work with a spind... more
|
Meßkirch, Germany
![]()
6692 km
2006
excellent (used)
Technical data
Control: Matsuura G-Tech 30i / Fanuc 30i
Year of construction: 11/2006
Condition: good
Procedures:
Nhqux
X 550 mm
Y: 450 mm
W: 500 mm
Bemomm3bp0
Automatic tool changer: tool places: 30
Sindeldrehtahl: 15.000U/min
Chip conveyor
Internal cooling
Spindle power: 15KW
Vices are not included in the sale price.
Availability: available now
Among current to visit: Yes
The machine can be visited at any time by appointment.
(Changes and errors in the technical data, information
an... more
|
CNC machining center HorizontalMatsuura MC 450 H-30-PC11 with Fanuc 15M control and standard accessories. Year 1990Spindle adapter BT 40100 Stations for tool magazinechip conveyorworkpiece loading stationtool breakage monitoring10 pallet places on the chain and one pallet place in the machine room (11 pallet places)Including 15 pallets.x-Weg450 mmy-Weg375 mmz-Weg450 mmRoom requirement approx. 4.9 x 4.2 x 2.7 m
Bfubsblldy more
|
|
Nürnberg, Germany
![]()
6742 km
2000
excellent (used)
under power.very good condition.table dimensions: 2X 300x300mmSpecificationsAxis X449.6 mmAxis Y398.8 mmAxis Z398.8 mmRotary table (4th axis)CNCFANUC 18i-MTool Magazin:40.Spindle taperBT40Max. spindle speed15000 rpmSpindle motor power7.5 kW
Ehecidf more
|
Horizontal CNC machining center serial. MATSUURA MC model 600 H - 45
Masch.# 870706216 built in 1987
Technical data:
Table working area 450 x 450 mm
Tischlängsweg X 600 mm
vert. Travel of spindle stick Y 450 mm
Stand Cross movement Z 480 mm
Nj8u9
Table switching increment 0.001 mm
maximum table load of 500 kg
Number of tools in the changer 50
Distance table-spindle axis 85-525 mm
Center of the table spindle 125-605 mm
Spindle diameter 80 mm
Spindle carrier BT 40
Spindle speed 30-6000 RPM.
Rapid... more
|
Universal external and internal cylindrical grinding machine
Equipments:
Swiveling internal grinding device with Fortuna internal grinding spindle
Type FIVS 60x315L
2-axis digital display Heidenhain
Tailstock
Magnetic chuck
Various grinding wheels with flanges
Other accessories for the machine.
Two special cabinets for the storage of grinding wheels
Separate control cabinet
Coolant tank with pump
Complete documentation with operating instructions
Technical specifications:
Center distance 630 m... more
|
Remscheid, Germany
![]()
dealership location
6411 km
ready for operation (used)
Fagor CPU-KCF 8055 PLUS-T /V: H: 48A / S: 12.21 , serial number according to photo, used, normal traces of use, 100% functional, supplied photos
Ptz8gq more
|
MATSURA H PLUS - 405 TWIN PALLET HORIZONTAL MACHINING CENTREYear: 2002Matsura Fanuc G-Tech 16i ControlPallet Size 500 mm x 500 mm x 2X Travel: 600 mmY Travel: 600 mmZ Travel: 600 mmB Axis 360°Spindle Taper 40 BTAuto Tool Changer 31 ToolsSwarf Conveyor
Bydnjecy more
|
Table size 630 x 630 mm.
Table NCRT.
Number of pallets 2.
Movement x-Axis 900 mm.
y-Axis 800 mm.
z-Axis 710 mm.
Table indexing 0,001°.
Number of tools in magazine 120 pieces.
Maximum spindle speed 4.500 tr/min.
Bfsr82byyb
Tool taper MAS BT 50.
CNC Control Fanuc 18 M-C
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock. more
|
Borken, Germany
![]()
dealership location
6360 km
1992
good (used)
|
X-travel: 1000mm, y-travel: 800mm, z-travel: 750mm, table dimensions: 630x630mm, rotational speed: 22-4500/min, max. tool weight: 27kg, max. table load: 1.2t, weight: 17t.
Bfo3fey7yy more
|
Make Pall SeitzSchenk Filtersystems GmbH (DE), Type KFP 630/50, No 1041, New 2003, Material Polypropylene, Stainless steel, Filter press , Filter surface 30 m2, Recessed chamber platens , Number of platens 49+2, Internal platen sizes 560x560mm, External platen sizes 630x630mm, Platen thickness 50mm, Central inlet DN 65, Connections (3x) DN 40, Working pressure 10 Bar, Hydraulic closing , With hydraulic unit "pneumatic operated", Pressure max.700 bar, Floorspace 4,2x1,3 M, Total height 1,3 M, Wei... more
|
Muller Martini Bravo Plus AMRYS Year 2005 13000cph
6 x 0380 flat pile feeders, 1 x 1529 Cover feeder
0449 Three Knife Trimmer Two up production kit
4 x HK75 Stitching Heads, 4000 production hours
Automatic Make Ready System (quick job changeovers)
Perfetto Stacker
All tools, manuals & accessories
Bgouzchlx9
Machine sold as seen, loaded to truck, delivery and installation can be quoted for as an option.
Machine available early 2020 more
|
Rodeberg/ Eigenrieden, Germany
![]()
6607 km
1993
excellent (used)
Thickness planer KÖLLE type DH 63 630mmis optically and technically in a very good condition, the machine comes from a small village joinery with 2 people. The machine is sold, because the former owner has not found a successor for his company, everything works perfectly with recoil safety with Centrofix cutter for 4 knives, the knives do not have to be adjusted, can be used from 2 sides and are quite favorable the chips can be removed by the closed system very well the machine is in the origina... more
|
Frankfurt, Germany
![]()
6560 km
2012
excellent (used)
Polar high-speed cutter N 78 PLUSwith 18.5" colour display and touch screen OperationProgrammable all-round model with graphic process visualisationCutting width: 780 mmInsertion depth: 780 mmInsertion height max. (without cover plate) 120 mmBuilt 2012Machine number 8261033Accessories:CompuCutBarcode (incl. Barcode reader)P-Net Connect (incl. ESPV and P-Net ClientProcess visualizationPanel cover 40 mm (cutting width 50 mm) incl. control2 Air tables 750x750 mmRear table protection movablePC Termi... more
|
Boven-Leeuwen, Netherlands
![]()
6274 km
good (used)
Thicknesser Pinheiro D1E-630
- 4 knives
- max 630mm W
- max 250mm H
- 6000rpm
Bhq70lie
Included extra knives! more
|
Chipper SPOERR HACKER TMNK 630
Location
Gorzów Wlkp.
Pnlhc3x
Conditions of delivery
OWN COLLECTION
Cost of delivery
Customer cover
Startup Type
to be agreed
Description
Comments
Rotor diameter approx. 260 mm
Rotor length approx. 630
Filling hole approx. 600 x 820 mm
18.5 KW engine
(Made in Germany)
Control cabinet with control and position sensors of the hydraulic cylinder
After major refurbishment
further technical data on request more
|
Kniehebel backbreaker, bike ride with dike
TYP BMD RA 630/3-M
Built 03/1994
Be2ju0o3wr
Engine hours about 6500 h
One-size mule opening 630 x 500 mm
Drive E-engine 45 kW,
Column range 30 – 80 mm
Task bunker 4.0 m ³ with vibration gutter 2 x 1.1 kW,
Control cabinet with power outlets for foerter tape and magnet,
2 axle steering racks (admission letter) with mech. Degrading
Ges.-Weight 15 to more
|
Description: functional, used chamber filter press with motorized hydraulics, open filtrate drain with gutter and drip plate. Hydraulic cylinder with slight leakage, hydaulik aggregator is fully capable of function. The last assignment was in a sliding grinding plant.
Type: KFP 630
Manufacturer: Netzsch
Built: 1992
Documentation:
Visit: yes
Warehouse: Lager Warburg
Status: used - satisfactory
Plate transport: manual
Hydraulics: motorized
Accessories: - (Filter cloths / cut-through c... more
|
Bergkamen, Germany
![]()
6420 km
2010
ready for operation (used)
Schickart TS 38 or TS 38 Plus circular knife bread slicing machine, (table device) approx. 8-10 years old, completely made of stainless steel, purely mechanical, no electronics, max. bread length approx. 38 cm, cutting thickness infinitely variable approx. 4 - 14 mm, slices hygienically without oil. The machine is in bakery condition (used, roughly cleaned, functional), including a knife ready assembled. If you are interested, we can offer you an overhaul or a mobile stainless steel underframe a... more
|
Grinding machine for Czech production rollers TOS type BUC 63 A.
Machine in good technical condition for immediate reception.
Sanding Diameter fi 630 mm
Sanding length 3000 mm
Workpiece weight 2500 kg
Jfcnwxh
Machine Weight 18 Ton more
|
Anzahl Hobelkoepfe horizontal 2Hobelbreite 630 mmHobelhoehe max. 150 mmDurchlasshoehe 200 mmSpanabnahme unten max. 10 mmSpanabnahme oben max. 10 mmSpanabnahme vertikal max. 17 mmVorschubgeschwindigkeit 3-20 m/minTourenzahl der horizontalen Wellen 5'500 rpmTourenzahl der vertikalen Wellen 5'000 rpmDurchmesser der Hobelwellen 125 mmDurchmesser max. der vertikalen Hobelkoepfe 180 mmDurchmesser der vertikalen Wellen 40 mmDurchmesser der Einzugrollen 160 mmLaenge des Einzugtisches 950 mmMotorenstaerk... more
|
Roudnice nad Labem, Czech Republic
![]()
6893 km
2017
as good as new (ex-display)
Selling new barely used cooling unit from Parker, It was used for cooling of the vacuum screw pump, 20 kW power.
H9ol2ylku more
|
WYSOKA GŁOGOWSKA, Poland
![]()
7384 km
2006
excellent (used)
Line for production of MDF fronts
Bex32tyhvq more
|
Wiefelstede, Germany
![]()
dealership location
6377 km
used
On drills, drills, drills, spiral countersink, three knife trimmer, twist drills
Three knife trimmer
Diameter 17.75 mm
-nutzbare length 150 mm
Libvz
Recording MK2
Type HSSE
Number 19 pieces
-sold
Weight 6 kg more
|
Lackovce, Slovakia
![]()
7454 km
excellent (used)
Frequency converter FR-SF-2-26KP-BCG
Was used MAZAK MLTPLX 630
I have many parts for this machine.
-Electric motors.
-Frequency converters
-Drivers
Oct9iyzb
And much more.Please write an email more
|
Matsuura RA II G 2000.
Yaskawa J 300
30 WZG 15,000 rpm
SK 40
Traverse path x/Y/Z: 600/410 / 470 mm
Pallet size 600 x 380 mm
Beladung weight 250 kg
Rapid traverse x/Y/Z: 24,000/24,000/18.000 mm / min
IKZ
Ptvthu
Chip conveyor more
|
Langenfeld, Germany
![]()
6398 km
2017
as good as new (ex-display)
1 x GMP EXCELAM-Plus 1600 COMBI RSER - cold laminator
working width: 1600mm, upper roller heatable
Demonstration unit from 2017
- Laminator for processing all cold adhesive films with pressure-activated adhesives
- including base frame and winding device for carrier paper when processing self-adhesive foils
- including 2nd unwinding device at the front for print medium and rewinding device at the rear (roll to roll)
- upper roller heatable up to 120 °C
- infinitely variable working speed up t... more
|
Radial blower from Venti Oelde with intake silencer.
!! Characteristic as picture attached!!
Volume flow: 46308 m3/h
Pressure increase: 4830 Pa / 48.3 mbar
M0mz9mrc
Weight: 2750 kg
Temperature: 30°C
Speed: 1480 rpm
Engine: VEM 415 S4
Power: 110 kW more
|
Wiefelstede, Germany
![]()
dealership location
6377 km
used
|
Strakonice, Czech Republic
![]()
422 km
2007
excellent (used)
|
Babberich, Netherlands
![]()
dealership location
6312 km
2002
ready for operation (used)
VOLZ Guillotine 3000 x 6 mm
- Merk : VOLZ OZOMECH Poland
- Type : FGH630 A
- Serial : 0503 / 5334
- YOP : 2002
- Cutting length : 3.000
- Thickness steel : 6
- Tickness stainless : 3
- Thickness alu : 8
- Cutting angle : 0.30° – 3° Gr.
- Stroke’s : 15 – 30
Ezair2b
- Blade stroke : 190
- Depth back gauge : 0 - 1000
- Accuracy : 0,1 mm
- Dimensions
- Length : 3.660
- Width : 2.755
- Height : 1.700
- Weight : 5.100
- Power : 11 kW
- Sheet support arms... more
|
saw blade diameter 630 mm
cutting diameter 200 mm
stroke 1000 mm
cutting speed 6-26 m/min
cutting lenght max. 1000 mm
capacity 90 degrees: flat ca. 340 x 137 mm
total power requirement 11 kW
Beoc72f9ie
weight of the machine ca. 2 t
dimensions of the machine ca. 2 x 1,65 x 1,95 m
Condition: ready for operation
Electric 380 Volt
Cooling equipment
saw blade
REDUCED PRICE!
Fully automatic machine with preselection for number of pieces. The year of
production is estimated. The machine is ... more
|
Wiefelstede, Germany
![]()
dealership location
6377 km
used
|
x-travel 550 mm
y-travel 400 mm
z-travel 360 mm
control Sinumerik 840 D
Bezulrg32x
Main spindle: Kessler-Spindel
turning speed range - main spindle max. 20.000 min/-1
power capacity - main spindel 14 / 9,5 kW
max. Torque 90 Nm
tool taper HSK A 63
work table:
table surface area 1050 x 450 mm
max. table load 500 kg
max. workpiecediameter 280 mm
max. workpiece height 250 mm
tool magazin:
number of toolpositions 48 pos.
max. tool diameter 82 mm
max. tool-dia with free toolbox 125 mm
max. tool... more
|
grinding length 650 mm
grinding width 450 mm
workpiece height 400 mm
table-size 850 x 360 mm
max. table load 350 kg
dist. center of grinding spindle - table 600 mm
table travel longitudinal 840 mm
table travel cross 410 mm
table feed 2 - 35 m/min
turning speed range - grinding wheel 1000 - 3000 U/min
power capacity - grinding motor 12,5 kW
grinding wheel size Ø 400 x 50 x Ø 127 mm
magnetic clamping plate 600 x 400 mm
dressing device Kopfabrichter
voltage 400 V
total power requirement 20 kVA
Nlp... more
|
pressure:630 t
distance between columns:420 mm
stroke:310 mm
Distance table/ram, stroke up:320 mm
Table surface area:500 mm
table height over floor:750 mm
Nnxcx
Ram surface:290 mm
Power capacity:4,0 kW
Weight:3,1 t
Dimensions (WxDxH):1,3 x 0,8 x 1,8 m more
|
Control: FANUC 16 M Seikos Sigma Control
Axes
X-axis travel mm: 850
Y-axis travel mm: 800
Z-axis travel mm: 850
B-axis degree: 1º
Feed max. mm / min:
Rapid traverse max. m / min:
Palette
Dimensions mm: 630 x 630
Workpiece weight max. kg: 600
Spindle
Spindle speed rpm: 10.000
Spindle drive power kW: 25
Tooling system
Jukf7nqr
Tool holder: ISO 50
Tool magazine: Chain
Tool magazine slots St .: 120
Tool changer: Double Gripper
Tool diameter mm:
Tool diameter with free adjacent seats mm:
Tool ... more
|
Wiefelstede, Germany
![]()
dealership location
6377 km
used
Roller lifting table
Platform 630 x 1500 mm
Dimension 340 mm retracted
Extended dimension 870 mm
-Max hub 530 mm
Pneumatic roller brake
Qltkb307q
Roll diameter 80 mm
Weight 165 kg more
|
|