Used Maximart Cnc for sale (8,492)

Condition: good (used), Year of construction: 1988, CNC universal console milling machine Fabr.KLOPP Type:FWS15 Bj.88 Pgodpfxjbu Em Ae Af Ijg CNC contouring control Heidenhain TNC 155. Travel:X1170mm Y:420mm Z:420mm Aufspanntisch:1500X400mm Spindle mounting:SK50 Spindle power:15KW Spindle speed:35-3550rpm Counter bearing for horizontal milling, cooling device, spittoon, Various tool holders, Complete machine documentation. Machine immediately ready for use Workshop tested. New parameters and batteries on 20.08.2020 Installed. Good general condition. Machine can be run under current.

Condition: good (used), Year of construction: 1990, CNC Cylindrical Grinding Machine Pedpfxsid Aphj Af Iogg Make: TSCHUDIN Type: HTG 22 - 862 Year 1990 with MARPOSS E14 control and measuring control E5. center width : 650 mm center height : 100 mm grinding length : 620 mm Weight : ca.4 500 Kg. Further data See : TECHNICAL DATA SHEET With many grinding stones and holders Complete machine documentation available. Machine in stock.

Condition: good (used), Year of construction: 2005, turning length: 450 mm, travel distance X-axis: 135 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 450 mm, C-Axis rapid traverve 400 Min Turret indecing time 0,2 sec for 1 station Heavy duty cutting (depth cut 6mm) 162.7 mL/Min LNS Bar feeder new 2017 Large package tooling driven / live tools 8 axis controlled with 2 spindles and turrets Max. turning Ø: 250mm X-Axis: 135mm Y-Axis: 40+40 = 80mm Z-Axis: 450mm B Axis: 510° Spindle bore: 49mm Speedrange: 6000Rpm Spindle power: 30kW Subspindle speeds: 6000Rpm Subspindle bore: 49mm ATC / revolver: 12 Speed live tools: 6000Rpm Positions lower revolver:12 Speed live tools: 6000Rpm Length: 2800mm Width: 2000mm Height: 2000mm Weight: 5000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Pgedpeydcvzofx Af Iog

Year of construction: 2001, condition: good (used), Data will follow... Pgedpfx Afoydni Hs Iog

Condition: used, Year of construction: 2010, turning diameter over bed 316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm Podpjydqpisfx Af Isgg swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 Psdpfx Aeydi Svef Iegg * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm Pedpfxjydiqfs Af Iogg swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 320 mm z-travel 450 mm Control Haidenhain TNC 124 drive of main spindle 3 kW number of spindle speeds 63-3150 u/min tool taper SK 40 stroke of quill vertical 60 mm feed speeds 5-2000 mm/min rapid traverse 2 m/min work table: 800x320 mm coolant 20 l/min total power requirement 5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,2x2,4x1,6 m Pjdpfjxndahsx Af Isgg

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 405 mm, installation height: 820 mm, operating speed: 8 mm/s, reverse speed: 100 mm/s, total length: 7,360 mm, total width: 3,025 mm, power: 55 kW (74.78 HP), travel distance Z-axis: 420 mm, empty load weight: 60,000 kg, passage width: 3,760 mm, table width: 500 mm, 8 assen: Y1 / Y2 / X1 / X2 / R2 / R2 / Z1 / Z2 Bovenste hydraulische klemming Laserveilige beveiliging = u kunt snel tot 1 mm van uw werkstuk laten zakken en daarna overschakelen naar een lagere buigsnelheid Pgodsv Rwm Repfx Af Ijg Robuuste kantbank ram geschikt voor het verwerken van gereedschappen tot 300 ton per meter! Er is veel zwaar gereedschap beschikbaar Gereedschap is OPTIONEEL! Capacity: 640 ton x 4500 mm Backgauge: CNC Locking speed: 80 mm/sec Height: 5385 mm (4445 mm above floorlevel)

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 400 mm, installation height: 650 mm, operating speed: 7 mm/s, reverse speed: 55 mm/s, total length: 8,400 mm, total width: 3,100 mm, total height: 4,620 mm, power: 47 kW (63.90 HP), travel distance Z-axis: 300 mm, empty load weight: 90,000 kg, passage width: 7,210 mm, table width: 350 mm, - 8 assen: Y1 / Y2 / X / R1 / R2 / Z1 / Z2 / V - nieuwe 2D Touch grafische besturing - zware achteraanslag - Amada-bomberingssysteem (V) - nieuw laserbeveiligingssysteem Machine kan gedemonteerd worden in onderdelen, kan in containers worden getransporteerd Capacity: 630 ton x 8100 mm Backgauge: heavy duty CNC Pgodpjwu Inljfx Af Ijg Locking speed: 70 mm/sec Power needed: 380V

Condition: ready for operation (used), chuck outer diameter: 1,250 mm, controller model: E.C.S CNC 1402, empty load weight: 17,000 kg, 5000 kg maximaal op tafel KM 50 gereedschappen Max turningdia -- passage: 1400 mm Power on the spindle: 60 kW Max longitudinal travel X-axis: 2700 mm Pgodpfx Afjxqh R No Isg Max hight of workpiece Z-axis: 750 mm Number of speeds: 2-430 rpm - max 450 Nm Power needed: 3 x 380 V TOOLING: yes Turret: yes Qty Tools: 24 Coolant pump: yes Light: yes

Condition: ready for operation (used), controller manufacturer: ECS AZ 200 CNC, empty load weight: 8,500 kg, 5 assen simultaan Max longitudinal travel X-axe: 1500 mm Pedpjycy Edsfx Af Iegg Max cross-travel Y-axe: 750 mm Max travel Z-axe: 700 mm Power on spindle: 2.2 kW Admission in boring head (ISO): ISO-40 Spindlespeeds: 80 – 3600 rpm ACCESSORIES & TOOLING: yes Coolant pump: yes Toolholder: yes Number of tools: 24

Condition: ready for operation (used), controller manufacturer: 2D touch, throat depth: 200 mm, operating speed: 11 mm/s, reverse speed: 80 mm/s, total length: 4,100 mm, total width: 2,320 mm, total height: 2,800 mm, power: 11 kW (14.96 HP), empty load weight: 8,500 kg, passage width: 2,050 mm, table width: 180 mm, speciale verlenging van 1000 mm voor een totale buiglengte van 3500 mm Pgodpfxsx Enfro Af Iog 3 assen: Y1 / Y2 / X achteraanslag van 1000 mm !! lvd-gereedschap Capacity: 100 ton x 2500 mm + 1000 mm Backgauge: CNC Max stroke: 200 mm! Max distance between table -- ram: 430 mm! Locking speed: 100 mm/sec

Condition: ready for operation (used), controller manufacturer: Delem DA65W, throat depth: 410 mm, installation height: 450 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, total length: 4,980 mm, total width: 2,240 mm, total height: 2,840 mm, power: 11 kW (14.96 HP), travel distance Z-axis: 180 mm, empty load weight: 13,000 kg, passage width: 3,760 mm, table width: 180 mm, 7 axes: Y1 /Y2 / X / Z1 / Z2 / R1 / R2 Pgjdpfjx Immtjx Af Ieg Amada bombation Capacity: 170 ton x 4230 mm Backgauge: CNC Locking speed: 100 mm/sec

Condition: ready for operation (used), empty load weight: 7,000 kg, + 3 freeskoppen Max longitudinal travel X-axe: 1500 mm Max cross-travel Y-axe: 800 mm Max travel Z-axe: 500 mm Power on spindle: 15 HP / 11 kW Type of millinghead: ISO 50 Spindlespeeds: 31 > 1400 rpm Table size: 2000 x 600 mm Digital screen: Heidenhain 3 axes Pgsdeycy Ekjpfx Af Ijg

Condition: ready for operation (used), total height: 3,300 mm, total width: 3,450 mm, total length: 6,000 mm, controller manufacturer: Siemens, empty load weight: 17,000 kg, Model: FTV 850 Koeling door spindel Het werkgebied kan in twee secties worden verdeeld Pjdpfswxz D Usx Af Ijgg 2 magnetische tafels Bewegende kolom, vergelijkbaar met Mazak VTC / Unisign / Hedelius Zware chassisstructuur Longitudinal travel X-axe: 1800 mm Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 800 mm Dimensions clamping space - table: 2300 x 900 mm Universal (2x 360°): ISO 50 Boring head (1 x90°): 19 kW

Condition: ready for operation (used), Directe aandrijving; 2 aangedreven rollen Conische buiging Geen fundering nodig Automatische drukbalans tussen boven- en onderrol Automatische smering De onderste rol kan worden versteld door middel van druk of positie. Number of rolls: 4 Pjdpfxox Enfxe Af Iegg Roll capacity cold: 3100 x 20 mm Roll dia upside: 370 mm Pre-bending: Yes

Condition: ready for operation (used), controller manufacturer: TS1 touchscreen, throat depth: 400 mm, installation height: 420 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, total length: 4,300 mm, total width: 1,800 mm, power: 5.5 kW (7.48 HP), travel distance Z-axis: 240 mm, empty load weight: 7,500 kg, passage width: 2,550 mm, table width: 90 mm, 7 axes: Y1 / Y2 / X / R / Z1 / Z2 / V wila / modufix / standard tooling sick laser security enlarged stroke of 240 mm enlarged depth of throat of 400 mm Capacity: 80 ton x 3100 mm Backgauge: CNC Locking speed: 300 mm/sec Pgodpex Immyjfx Af Ijg Height: 3160 mm (with arm)

Condition: ready for operation (used), controller manufacturer: TS3, installation height: 515 mm, operating speed: 20 mm/s, reverse speed: 90 mm/s, total length: 3,400 mm, total width: 1,850 mm, total height: 2,820 mm, power: 9 kW (12.24 HP), travel distance Z-axis: 265 mm, empty load weight: 5,000 kg, passage width: 2,550 mm, upper lower Wila tooling 5 axes: X / X' / R / Z1 / Z2 Capacity: 50 ton x 2550 mm Pgjdpsx Imkfsfx Af Ijg Backgauge: CNC Locking speed: 90 mm/sec

Condition: ready for operation (used), controller manufacturer: Cadman B + Touch, throat depth: 400 mm, operating speed: 11 mm/s, reverse speed: 113 mm/s, total length: 4,355 mm, total width: 2,525 mm, total height: 3,000 mm, power: 20 kW (27.19 HP), travel distance Z-axis: 300 mm, empty load weight: 6,500 kg, passage width: 2,050 mm, table width: 150 mm, 8 assen: Y1 - Y2 - X - X' - Z1 - Z2 - R - V Easy Form Lasermeetsysteem (EFL) Wila modufix gereedschap (boven- en onderhydraulische klemming) lasersafe beveiliging Psdpex Imm Hefx Af Isgg 2 verplaatsbare plaatdragers Vergrote opening van 500 mm!! Capacity: 80 ton x 2500 mm Backgauge: CNC Max distance between table -- ram: 500 mm!! Locking speed: 130 mm/sec

Year of construction: 2025, condition: like new (used), functionality: fully functional, 2025 BCAMCNC 5 Axis CNC Router – Like New, Never Used For sale is a 2025 BCAMCNC 5 Axis CNC Router, installed but never put into production. This machine is in as-new condition, making it an excellent opportunity to purchase a state-of-the-art 5 axis router without the lead times or cost of a brand-new unit. The BCAMCNC 5 Axis Router is designed for high-precision machining of complex parts, ideal for industries such as aerospace, automotive, furniture, marine, signage, mould making, and advanced composites. ✅ Key Features & Benefits 5 Axis CNC machining – full simultaneous interpolation for complex 3D parts Like new – installed but never used Heavy-duty welded frame for stability and long-term accuracy High-speed spindle for efficient cutting across a wide range of materials Automatic tool changer (ATC) for maximum productivity User-friendly CNC control with advanced software integration Vacuum table for secure workpiece holding Perfect for wood, plastics, composites, foams, aluminium and non-ferrous metals 📐 Technical Specifications (2025 BCAMCNC 5 Axis CNC Router) Table Size: 3000 × 1500 mm X-Axis Travel: 3000 mm Y-Axis Travel: 1500 mm Z-Axis Travel: 1200 mm A-Axis Rotation: ±120° C-Axis Rotation: ±360° continuous Spindle: 9kW High-frequency HSD (18,000 RPM) Tool Changer: 8 position automatic tool changer (ATC) Drive System: Servo motors with helical rack & pinion on X/Y, ball screw on Z Table: Vacuum table with powerful 7.5kW pump, multi-zone clamping Control System: Syntec 610MA-ES industrial CNC controller Max Cutting Speed: Up to 25 m/min Repeat Accuracy: ±0.05 mm Power Supply: 380V / 50Hz Psdpsxddk Sjfx Af Isgg 📦 Included with Machine Full extraction-ready setup Includes tooling package Documentation & manuals 🌍 Condition Installed but never used – machine is like new 2025 model – latest generation technology Available immediately – no waiting times 🔑 Summary This is a rare chance to purchase a 2025 BCAMCNC 5 Axis CNC Router in unused condition. With full 5 axis capability, a heavy-duty structure, and precision control, it is the perfect solution for companies requiring high accuracy and productivity in machining complex 3D parts.

Condition: used, Year of construction: 2005, CNC Control: MSX 850 X Axis mm: 260 Z Axis mm: 795 Y Axis mm: +/- 50 Maximum Turning Diameter mm: 366 C-Axis Increment: 0.001° Maximum Turning Length mm: - Cutting Feed Rate mm/min X, Z, Y: - Swing Over Bed mm: Ø Swing Over Cross Slide mm: Ø Bar Capacity mm: Ø 80 (main) / Ø 51 (sub) Rapid Traverse Rate max. m/min X, Z: - Main Spindle 12" Spindle Speed rpm: 4,000 Spindle Power kW: 18.5 Torque Nm: - Spindle Bore mm: - Main Spindle Nose: A2-8 Sub-Spindle 10" Spindle Speed rpm: 6,000 Spindle Power kW: 11 Torque Nm: - Spindle Bore: - Sub-Spindle Nose: A2-5 Pgsdpfxeyc Ngqj Af Ijg Turret Positions: 12 Number of Driven Tool Stations: 12 Driven Tool Speed rpm: 6,000 Driven Tool Power kW: 5.5 EQUIPMENT Chip conveyor 3-color status lamp MACHINE DIMENSIONS Length mm: 4,414 Width mm: 2,370 Height mm: 2,115 Weight kg: 6,200

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, CNC Gear Hobbing Machine Horizontal Pgjdpfx Afoqaf U To Isg . no tailstock, just for chuck parts . max. gear diameter: 90 mm . max gear width (b): 50 mm . max module: 3

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Machine No.: 2219, Control system: Siemens, Model Sinumerik 840D sl, 2 spindles, spindle distance 210 mm, max. speed approx. 4000 rpm, W-tool spindle / grinding spindle 2000 rpm, max. workpiece diameter 100 mm, max. workpiece height 40 mm, 8-position tool turret, manufacturer Sauter, model 0.5.480.516, tool holder type Capto C5, workpiece automation device, manufacturer DVS, model Moduline, transfer robot manufacturer Epson, PLC system control by Siemens, display with Simatic Panel Touch, coolant system by Knoll, type KF150/950, paper band filter, chip conveyor by Knoll, type 225S-2/170 Podjx Ahg Ujpfx Af Iegg +++ Note: This machine is part of an online surplus sale! +++

Condition: used, Make: BUDERUS, Model: U-Grind 800, Year of manufacture: 2017, Machine No.: 9438, Control system by Rexroth, Type: IndraControl V, Max. workpiece diameter: 250 mm, Max. workpiece length: 800 mm, Multifunction head by WMZ, Type MFK 54-50 (external grinding, internal grinding, hard turning, measuring), Max. speeds: C-axis workpiece spindle: 1,000 rpm, High-performance external grinding spindle: 5,100 rpm, High-frequency internal grinding spindle: 30,000 rpm, Max. feed rates: Z-axis 30 m/min, X-axis 60 m/min, Workpiece spindle by WMZ, Type W160A, Tailstock by WMZ ZN28-011-00K, Coolant system, Cooling unit by Rittal, Type SK3303500, Chip conveyor, Automation module by Upload, 1 lot of fixtures and accessories Psdpfx Afjx Ahk Ho Ijgg +++ Note: Machine is part of an online direct sale! +++