Used Metal Detector Schematic for sale (34,901)

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Bwedpfsxdmgvjx Acwen Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 28.22.0079, Year of construction: 2022, operating hours: 6,700 h, overall weight: 1,870 kg, laser power: 700 W, operating pressure: 8 bar, inner dimension height: 365 mm, inner dimension length: 280 mm, No minimum price – guaranteed sale to the highest bidder! The system has been serviced annually by SLM Solutions. Service reports and machine assessment are available upon request. The system includes the “SLM280 2.0 complete material change kit incl. PSM100” and a second set of filter housings, minimizing the effort required to switch between two materials. TECHNICAL DETAILS Laser power: up to 700 W Materials: suitable for all common materials in the SLM process Temperature range: 20–25 °C Relative humidity: max. 60 % Floor unevenness: max. 5 mm/m² Floor load capacity: min. 2,200 kN/m² Floor surface: antistatic, solvent-resistant, impermeable to liquids, smooth Processing area and process data Build volume (L x W x H): 280 x 280 x 365 mm Actual build rate: up to 113 cm³/h Variable layer thickness: 20–90 µm Minimum feature size: 150 µm Beam focus diameter: 80–115 µm Scanning speed: max. 10 m/s Laser type: IPG fiber laser Single laser 700 watts Media supply Operating pressure argon: 7–8 bar Operating pressure nitrogen: 7–8 bar Operating pressure compressed air: 7–8 bar Operating pressure cooling water: 4 bar Compressed air quality: ISO 8573-1:2010 [1:4:1] Volume flow rate primary circuit: 1.4 m³/h Cooling water inlet temperature min.: 18 °C Cooling water inlet temperature max.: 20 °C Cooling medium: Coolflux MACHINE DETAILS Control system: SLM MCS Electrical connection values Connection: CEE 3/N/PE Voltage: 400 ±10 % V Frequency: 50/60 Hz Current draw: max. 40 A Connected load: 3.5–5.5 kW Heating power: 1,200 W Cooling power: 4.6 / 5.8 kW Largest motor: 7.5 kW Dimensions & weight Dimensions (L x W x H): 2,600 x 1,200 x 2,700 mm Shipping weight: 1,870 kg Operating hours: approx. 6,700 h EQUIPMENT Cooling is provided by “Cooling unit HRS050 L/W” Sieving station PSM100 V3 Handling device BPH280 and bottle lift (facilitates handling of powder containers and removal of substrate plates after printing) SLM280 2.0 complete material change kit incl. PSM100 Powder containers Substrate plates (1.2709 & AlSi10Mg) Additional filter housings Filter elements Bodpfx Acey Rn A Ijwswn The system is currently still in operation and can be inspected by appointment. After the auction, the system will be disassembled by the machine manufacturer, loaded onto the company premises, and handed over to the buyer.

Condition: new, Year of construction: 2024, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. Bwsdpfx Ajhwrlxocwon The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, - 50 HP rotor motor Bjdpfxowtzrbj Acwewn - 18' x 22''outfeed belt conveyor

Condition: used, Year of construction: 2005, total length: 3,940 mm, total width: 1,980 mm, total height: 2,010 mm, Empty weight: 7.000 kg Working width: 950mm Working height: 0,5-120mm - Year: 2005 - Documentation available: No - CE marking present: Yes Bwsdpsxwnbuofx Acwsn - CE certificate present: No - Serial number: - Drive system: CNC - Number of stations [pcs]: 3 - Power [kW]: 39 - Min. sheet thickness [mm]: 0.5 - Max. sheet thickness [mm]: 120 - Max. working width [mm]: 950 - Transport dimensions: 3940mm x 1980mm x 2010mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Swivel bending machine HM, type KSM-5 / 2500 Manufacturer's No. 2004 / 3262, Year of manufacture 2004 Useful length 2520 mm Maximum sheet thickness 5 mm at 400 N/mm² Stroke of the upper ram 200 mm Adjustability of the bending ram 60 mm Motor power, upper ram 2.2 kW Motor power, bending ram 4 kW Mains connection 400 volts, 50 Hz - One-piece top beam 135° (installed) - Segmented gooseneck tool with mounting rail - Round tool for rounding up to 180° - Various bending tools for the bending ram - Adjustable bending angle via handwheel with clamping mechanism - Electric foot switches - Operating manual with electrical diagram available Bjdpfxozbhuwj Acwjwn - Without rear stop Space requirement L x W x H 3900 x 1150 x 1560 mm Weight (machine) 4700 kg Weight (tools) 250 kg In good condition

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, total length: 1,100 mm, total width: 1,320 mm, total height: 1,050 mm, input frequency: 50 Hz, Sheet metal cleaning machine KD-Putz Tubur Premium Sheet metal cleaning machine Bwedpfx Asyv U Nfecwen for baking trays / perforated sheets short side raised stainless steel version with oiling system & sheet metal trolley connection 400V, 16A CEE plug dimensions: 1320 x 1100 x 1050 mm, WxDxH used machine, available from a bakery.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, NEW +++ NEW 3 & 4-Edge Sheet Metal Cleaning Machine NEW +++ NEW Operated by 1 person Stainless steel version, mobile Maximum sheet metal size: up to 600 x 800 mm Removable collection tray at the bottom Dimensions: 2234 x 630 x 1372 mm, L x W x H The versatility of the tray/sheet metal cleaner is also evident in its ability to process 4-edge trays with an edge height of up to 24 mm. Contaminants collect under the cleaner on a pull-out, easy-to-empty shelf. The unit is fully mobile and can be easily moved to the desired location after work is completed. The entire structure is shot-blasted, ensuring that the surfaces are as smooth and hygienic as possible. Connection: 400V, 16A-CEE plug New unit With warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Sheet metal cleaning up to 600 x 1000 mm Bsdpow S Slnsfx Acwswn Greasing/oiling for sheet metal Service package Delivery service Instruction and commissioning Visit us!

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 641/302, total width: 600 mm, total length: 800 mm, total height: 1,300 mm, overall weight: 120 kg, ECKOLD SK 2911/HAE 500/2 power former Bedpoy Dcwysfx Acwewn - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 30 A - Connection: 8.1 kW Note: This item must be collected on a binding basis between July 7th and July 9th, 2026, on a date to be agreed upon. FCA D-71263 Weil der Stadt – loaded onto truck

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, total length: 7,500 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,500 kg, KALTENBACH SKL 400 H Cold Circular Sawing Machine (completely overhauled) - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade mount: 50/4 x 14/80 mm - Working range, round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles horizontal 45°: 220 x 60 mm - Profiles vertical 45°: 80 x 120 mm - Saw motor: 3.7 / 4.5 kW - Cutting speed: 1750 / 3500 m/min - Saw blade feed: 0 - 3700 mm/min - Saw blade rapid return: 4500 mm/min Bodpfxjy Dcu Es Acwjwn Additional equipment: - Workpiece clamping with short stroke vise: stroke 8 mm - With hand crank for presetting - Machine overhauled and newly painted - Horizontal clamping cylinder front, each - Minimum quantity lubrication instead of coolant spray system - T3 feeder roller conveyor with rollers 60 x 289 mm - One starter section: 2000 mm, with 5 rollers, one support leg, one mounting angle - One extension section: 2000 mm, with 4 rollers, one support leg, one stop roller, adjustable as a guide for material bars - Length measuring device including T3 discharge roller conveyor Note: The item must be collected by binding appointment between 07 and 09 July 2026 (exact date to be agreed). FCA D-71263 Weil der Stadt – loaded onto truck

Condition: good (used), functionality: fully functional, Year of construction: 1998, Motorized Swivel Bending Machine Manufacturer: HERA, Type: SM4-30/6 Year of Manufacture: 1998 Bsdpey U U Ixjfx Acwjwn Technical Data Manufacturer: HERA Type: SM 4 Year of Manufacture: 1998 Capacity: 3020 x 6 mm Upper beam opening: 450 mm! Lower beam adjustment: 80 mm Working height: 900 mm Motor power, upper beam drive: 5.5 kW Motor power, bending beam drive: 11 kW Dimensions: approx. L 4.40 x W 1.60 (2.75 with rear stop) x H 1.85 m Weight: approx. 9 t Equipment: • Motorized bending beam adjustment for sheet thickness setting • Hydraulic upper tool clamping! • 2 bending rails, approx. 15 mm + 50 mm • 1 sharp rail • Goose foot tool, approx. 220 mm high, split • CNC-controlled rear stop • CNC control, Siemens S7 All information is without guarantee. An inspection under power is possible at any time in our showroom.

Condition: excellent (used), CATALOG NO. 7967 TECHNICAL DATA - Maximum working width: 1100 mm - Maximum working height: 170 mm 2 units: 1) Grooved metal roller for calibration 2) Grooved rubber roller + shoe + metal roller – Top side: - Rubber pressure roller - Unit (two units on one motor) 15 kW - Rubber pressure roller - Outfeed rubber roller - Belt cleaning by air blast – Bottom side: Bwjdpfsza Elwox Acwsn - 2 metal pressure rollers - Feed belt - 2 rubber pressure rollers - Pneumatic belt oscillation - Grinding thickness potentiometer - Electric and manual table lifting (for precise adjustment) - Pneumatic brake - 2 feed speed options - Working pressure: 6–8 bar - Extraction nozzle diameter: 2x140 mm - Overall dimensions (L/W/H): 1830x1670x1950 mm - Weight: 1160 kg ADVANTAGES – Italian manufacture – 2 sanding units – Not repainted – Used sander, perfect condition Net price: 77,900 PLN Net price: 18,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary with larger exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2021, total length: 1,200 mm, total width: 800 mm, total height: 250 mm, SCHUNK - KONTEC KSG 100 MACH-ID 9632 Make: SCHUNK Type: KONTEC KSG 100 Bodey Uvk Iepfx Acwjwn Year: 2021 Clamping force 4 - 30 kN Weight 19.5 Kg Single stroke vice Clamp width: 100mm Max. opening: 100mm Manuel or hydraulic: Manuel Number of matching vices:4 Length: 1200mm Width: 800mm Height: 250mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 2000, Motorized Swivel Bending Machine Manufacturer: HERA, Type: SM4 2500x6mm Year of Manufacture: 2000 Technical Data Manufacturer: HERA Type: SM 4 Year of Manufacture: 2000 Capacity: 2520 x 6 mm Upper ram stroke: 450 mm Bwodpfx Acey U Ec Hswon Lower ram adjustment: max. 100 mm Bending ram adjustment: max. 100 mm Connection value: 5.5 kW / 7.5 kW Operating voltage: 400 V / 50 Hz Control voltage: 230 V Dimensions: approx. L 3.95 x W 2.80 x H 1.9 m Weight: 6.7 t Equipment • Sharp die • Bending die • Segmented bottom die set (total length approx. 2000 mm) • Motorized bending ram adjustment • Controlled back gauge 10-1000 mm • Siemens S7/Simatic OP7 control system The machine is in good condition. It comes from the workshop of a correctional facility. All information is provided without warranty. A demonstration under power is possible at any time in our showroom.

Year of construction: 2009, condition: used, functionality: fully functional, machine/vehicle number: 001-2009, MAPSFERA 1 09 METAL SORTING LINE, consisting of a vibrating feeder, conveyor belt, head magnetic pulley, and eddy current separator, designed for efficient automatic separation and recovery of ferrous and non-ferrous metals in industrial recycling applications. • Manufacturer: MAPSFERA • Model: 1 09 • Configuration: vibrating feeder + conveyor belt + magnetic pulley + eddy current separator Bwedjzbtrzspfx Acwjn • Application: separation of ferrous and non-ferrous metals from mixed waste streams • Status: available for inspection • Current condition: dismantled / stored The system is designed for continuous industrial operation in material recovery and recycling plants, enabling highly efficient metal sorting from mixed input streams. The vibrating feeder ensures a controlled and uniform material flow, while the conveyor system transports the material through the various separation stages. The head magnetic pulley removes ferrous metals, and the eddy current separator allows for the effective separation of non-ferrous metals such as aluminum and copper, improving overall recovery rates and material purity.

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Bwjdpetwn E Ujfx Acwen Saw blade dm.355 mm Cutting range round max.120 mm Square max 120 mm X 120 mm

Condition: good (used), functionality: fully functional, Year of construction: 2022, Electric bending machine in good condition, with automatic back gauge. Specifications: Bedpfx Acey Ucycewown Model: SCHRÖDER MAKU Year: 2022 Made in: Germany Working length: 3,200 mm Bending thickness: 1.5 mm Bending beam tooling: 10 and 25 mm Controller: Classic bend Motor: 2.5 kVA Weight: 2.7 tons If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2015, machine/vehicle number: 111376, Belt length approximately 3,800 mm, automatic tensioning device. Bwedpfx Acey U R Saewen

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Schroder, controller model: POS 2000, working width: 3,200 mm, folding beam adjustment: 300 mm, installation height: 1,737 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, back gauge adjustment: CNC-controlled, overall weight: 4,380 kg, total length: 4,568 mm, total width: 2,450 mm, total height: 1,737 mm, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, 2006 Schröder SPB 3200 x 3.0 CNC Folder – POS2000 Control – Very Good Condition Machine Manufacturer: Schroder Machine Model: SPB 3200 x 3.0 CNC Folder Machine Type: CNC Sheet Metal Folder Year: 2006 Condition: Very good High-Quality Used CNC Sheet Metal Folder for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 2006 Schröder SPB 3200/3.0 CNC Folder, a high-precision universal sheet metal folding machine from one of Europe’s most respected manufacturers. This machine is in very good condition and is fully equipped with sharp tooling, box & pan tooling, and extra bending rails, making it ideal for both standard and complex folding applications. The control screen has been upgraded to a larger display, improving visibility, usability, and operator comfort. Key Features & Benefits Bwsdpfxeyakn Rs Acwon Schröder SPB 3200/3.0 CNC Folder 3200 mm working length 3.0 mm mild steel capacity Schröder POS2000 CNC control Upgraded large control screen Includes extensive tooling package Rear roller support table fitted Heavy-duty industrial build Excellent accuracy & repeatability Ideal for fabrication, HVAC, cladding & precision sheet metal work Included Tooling & Equipment Rear Roller Support Table Box & Pan Folding Tooling Sharp Sheet Metal Folding Tool Extra Bending Bars / Rails This tooling package allows for maximum flexibility, from straight folds to boxes, pans, trays, and complex profiles. Technical Specifications – Schröder SPB 3200/3.0Machine Type: Universal CNC Sheet Metal Folder Year: 2006 Control: Schröder POS2000 Condition: Very Good Capacity Usable working length: 3200 mm Maximum sheet thickness: 3.0 mm Beam & Adjustment Upper beam daylight: 300 mm Vertical adjustment of bending beam: 300 mm Drive & Power Upper beam drive: 4.4 kW Bending beam drive: 4.4 kW Nominal power: 9 kVA Pneumatics: 6 bar Machine Dimensions Machine length: 4568 mm Machine width: 2450 mm Machine height: 1737 mm Machine weight: 4380 kg Ideal Applications Sheet metal fabrication HVAC ducting & panels Architectural metal & cladding Enclosures, trays & cabinets General engineering & contract folding Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used CNC machinery Machines inspected & honestly described Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 11900715/C, saw blade diameter: 350 mm, feed length X-axis: 180 mm, feed length Z-axis: 170 mm, total length: 2,210 mm, total width: 1,100 mm, total height: 1,550 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 120 mm, type of input current: three-phase, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, cutting height (max.): 170 mm, overall weight: 530 kg, saw blade speed: 90 rpm, input voltage: 400 V, cutting range square steel at 45°: 100 mm, cutting range square steel at 90°: 105 mm, saw drive: 2,200 W, cutting diameter: 120 mm, saw blade bore: 32 mm, 2000 MEP Cobra 350AX Automatic Circular Cold Saw – Efficient Metal Cutting for Industrial Production Available now: MEP Cobra 350AX, a robust automatic cut-off circular saw, perfect for industrial metal cutting applications. Manufactured in 2000 and in good working condition, this machine combines manual and automatic operation modes, adjustable cutting settings, and a 350mm blade to deliver consistent, high-quality cuts. 🔧 Key Features: Blade Size: 350 × 32 × 2.5mm Spindle Motor Power: 2.2kW Blade Speeds: 15 / 30 / 45 / 90 rpm Vice Opening: 160mm Clamping Type: Pneumatic Power Supply: 400V / 3 Phase / 50Hz Manual & Automatic Modes: Yes Cutting Depth & Stop Height: Fully adjustable Machine Weight: 530kg Dimensions (L×W×H): 2210 × 1100 × 1550mm 📏 Cutting Capacities: At 0°: Round: 120mm Rectangular: 180 × 170mm Square: 105 × 105mm At 45° Left: Round: 120mm Rectangular: 135 × 60mm Square: 100 × 100mm At 45° Right: Round: 110mm Rectangular: 135 × 60mm Square: 95 × 95mm ⚙️ Ideal Applications: Cutting steel profiles, tubes, bars Suitable for light to medium-duty industrial production Great for fabrication shops, stockholders, and manufacturing plants ✅ Why Choose the MEP Cobra 350AX? Versatile cutting angles and profiles Dual operation mode (automatic/manual) Compact, efficient, and easy to integrate into existing workflows Pneumatic clamping ensures safety and consistency Low investment cost means big savings on a high-value machine MEP Cobra 350AX for sale Used automatic circular saw Cold saw for metal cutting Pneumatic clamping cold saw 350mm circular saw machine Bwjdpfxswtr Iyo Acwjn Industrial metal cut-off saw MEP saw 2000 model Automatic metal saw Ireland Circular saw for steel profiles 400V industrial cold saw Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2013, overall weight: 220 kg, chuck outer diameter: 600 mm, Metal cutting Tooling TDG Spain - 4-600 MACH-ID 9627 Make: TDG Spain Type: 4-600 Year: 2013 Diameter: 600mm 4 chuck: yes Max. speed:970Rpm Length: 1200mm Width: 800mm Height: 400mm Weight: 220kg Bsdpjy T Ik Refx Acwewn Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Ex-Linear light fitting with metal housing for surface mountingMake: EATONTyp:AB 12240 E36 pieces availableNew Items Bedpfx Acod N Sv Nswewn

Condition: used, Technical details: diameter: 20 mm workpiece length: - mm total power requirement: 2,3 - 3,0 kW open-circuit voltage: 2,8 V frequency: 50/60 Hz power consumption: 3 kVA connection voltage: 230 V Bwodpjw Rkybjfx Acwen control voltage: 15 (Gleichstrom) V dimensions of the machine ca.: 1,0 m weight of the machine ca.: 30 Kg dimensions L x W x H: 395 x 275 x 255 mm The crack tester consists of a portable housing with control and display elements, as well as connection cables for magnetization and a power plug. Area of application The crack tester is designed for surface crack testing of weld seams, large forged and cast parts, machine components, but also as a power unit for stationary crack testing benches. Only ferromagnetic workpieces can be tested! During magnetization, the workpiece must be sprayed with a test fluid (test medium). Defects can then be detected under UV light (UV lamp). *

Condition: used, Technical details: workpiece length: 600 mm pivoting angle: 100 Grad tilting and declining: re/li:30° Grad grinding wheel dia. (used wheel): 175x35 mm Bwedpfsu Ng Hbex Acwjn total power requirement: ca. 1,5 kW weight of the machine ca.: ca. 250 kg dimensions L x W x H: L.0;85xB:0;7xB:1;6 m Carbid Metal Tool Grinding Machine (chisel grinding machine) version double grinding disc machine grinding disc = diamond grinding disc with 175x35mm drill cutting edge via tilting lever *

Year of construction: 2020, condition: good (used), Remmert LaserFLEX | Fully Automatic Loading and Unloading – Used - : Price ex location: now only €119,000 (net), previously €145,000 (net) plus dismantling, etc.! Manufacturer: Remmert Model: LaserFlex Year of manufacture: approx. 2020 Sheet format: 3015 Load capacity: 1,000 kg 220 kg/m² Maximum sheet dimensions: 3048 x 1524 mm Maximum sheet thickness: 25 mm SMART Control 4.0 Can be combined with a sheet metal storage system (storage system not included in the sale) Original price: €250,000 (net) Manufacturer description: Equipped with two automation units – a loading unit and an unloading unit – the LaserFLEX allows for the decoupling of loading and unloading processes in laser cutting systems. After cutting, a fork unit lifts the processed metal sheet from the change table, while simultaneously a new sheet is transported from the connected storage system via a vacuum unit. As soon as the sheet is positioned next to the laser machine, the system is loaded with the workpiece by the unloader. This entire process takes just one minute. With LaserFLEX, the downtime of integrated laser cutting systems is virtually eliminated, even high-speed laser processing is optimally supported. Bsdpfx Acjwga E Towewn Key features: • Changeover times of approx. one minute (with 3015 format) • Highly automated production processes • Separate loading and unloading operations for the laser cutting machine • Manufacturer-independent integration of laser systems • Flexible storage options with tower or large-scale storage systems • Reduced downtime of the processing machine • Connection of multiple laser systems in a chained layout • Integration into existing warehouse and production environments • Intuitive, graphical touch operation with visual status management • Modern industrial design Fast, flexible solution for the automation of laser systems Increased productivity in laser processing Fastest sheet changeover time on the market Seamless integration into existing production environments Handling of any sheet formats Effective supply and removal for multiple laser systems Intuitive, graphical touch operation with visual status management Innovative, modern industrial design Condition: Good Available: Immediately Location: 46419 Isselburg