Used Metalski Zavod Tito for sale (85)

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 1321500165, Year of construction: 2023, operating hours: 10 h, load capacity: 3,000 kg, lifting height: 4,800 mm, free lift: 1,520 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,225 mm, power: 24 kW (32.63 HP), gearing type: automatic, battery capacity: 560 Ah, battery voltage: 80 V, DGUV certified until: 08/2025, fork carriage width: 1,228 mm, fork length: 1,070 mm, overall weight: 4,830 kg, total height: 4,095 mm, total length: 3,640 mm, total width: 1,298 mm, color: original, Equipment: cabin, lighting, sideshift, Technical data: Type: EP CPD30L1 (S) Load capacity: 3000 kg Load center of gravity: 500 mm Forks: on request Drive: electric Lifting mast: Triplex‑4,800mm Equipment: Full cabin with heating Side shift and fork adjustment Non-marking SE tires LED headlights Bluespot Warning lights Display Lifting height: 4800 mm Height: 2225 mm Free lift without/with LSG: 1520 mm/ 1130 mm Battery: 80V/560AH Li-ion (large battery) Charger: 80V/200A Application: The L1 series is more powerful than many competitors thanks to the built-in Li-ion technology. With their waterproof design, these forklifts can be used outdoors, even in the rain. They are particularly effective when loading and unloading loads. Bjdpovmyz Njfx Aaqeww Features: Revolutionary Li-Ion technology: The L1 series is considered the world's first true Li-Ion forklift. By eliminating combustion engines and bulky lead-acid batteries, the truck has been designed from the ground up with ergonomics and performance in mind. Fast charging and high performance: The compact size of the battery allows for optimized truck sizing for maximum stability and safety. The L1 forklift can be charged in just 2.5 hours and offers the impressive ability to take up to 7% of charge in just 10 minutes. Waterproof design (IP54): All L1 series forklifts are water and dust resistant to IP54. This waterproof design allows for outdoor use, even in adverse weather conditions, which is not possible for many electric forklifts. AC motor performance improvement: The optimized 20L1S now has all AC motors, resulting in increased performance. This increases the efficiency and performance of the forklift. Large cabin with maximum legroom: Thanks to the completely redesigned chassis, the L1 forklift offers the most legroom in the industry. The compact battery creates sufficient space for the drivers' legs, which significantly improves driver comfort during long work shifts.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 11,676 h, machine/vehicle number: KM-1148, laser power: 3,200 W, punching force: 22 t, punching diameter: 76 mm, sheet thickness (max.): 8 mm, workpiece weight (max.): 230 kg, workpiece length (max.): 1,650 mm, workpiece width (max.): 2,585 mm, No reserve price - guaranteed sale at the highest bid! Machine including SheetMaster and TrumaGrip TECHNICAL DETAILS Punching force: 22 tons Control: Siemens Sinumerik 840 D Punching working area: 3,085 x 1,740 mm Combined working area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Tool holder: Hydraulic mono tool holder, 360° rotation Holder: Programmable for repositioning processes Chip handling: Chip bucket Laser unit: High-frequency excited CO₂ laser TruFlow Laser working area: 3,085 x 1,650 mm Bwodpfx Aasv Am Twoqsw Laser power: 2,700 Watt Laser cutting heads: 5" lens, 7.5" lens, cutting head quick-change device Distance control: DIAS Cutting technology: HI-LAS high-pressure cutting Functions: AutoLas, ContourLas Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg Switch-on time: 59,2344 h Laser cutting time: 11,676 h EQUIPMENT - Parts chute 500 x 500 mm, sensor-monitored - 2 good parts boxes - AutoLas - Ejection cylinder on laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction - 2nd lubricant container - Multi-beam Light barriers - Quick shutdown hydraulics - Extraction and compact dust extractor - MultiTool function - Thread forming function - Vibration-damped installation - Brush tables - Chip conveyor with tilting container - Standard equipment SheetMaster 1606 - Loading station with spreading magnets - TRUMAGRIP scrap skeleton disposal unit with scissor lift table - Sheet thickness gauge for double sheet control - Suction plate module - Parts conveyor belt A deposit of EUR 7,500 is required for transport security.

Condition: new, Year of construction: 2025, Sandwich conveyors Do you need to transport bulk material vertically UP or DOWN? Or at an angle greater than 45 degrees? Or all of this at the same time? Is the elevator not suitable for you? For example, the MATERIAL IS TOO LARGE (+40 mm)? Does the material STICK and get stuck in the buckets? Or even permanently DAMAGE THE BUCKETS? SANDWICH-CONVEYORS are a KNOW-HOW, a NEW TYPE OF CONVEYOR, DEVOID OF THE SHORTCOMINGS of its competitors. - conveyor capacity from 50 to 10,000 t/h. - conveyor length from 10 to 5000 m. - conveyor angle from 0 to 90 degrees. - material size from 0 to 500 mm. - conveyor belt can have a complex trajectory - turn up/down, right/left. Bjdpfxewrt N No Aaqjww - regular smooth conveyor belt is used - it is possible to transport sticky material and clean the belt well after unloading. Z-conveyors Z-conveyors have an almost infinite number of variations. The capacity, the route, the complete conveyor can be varied. The range of applications for these machines is also very wide. But, it is most relevant and expedient to apply such conveyors where: - the use of a high angle material lifting solution is advantageous; - a combination of transport sections at different angles to the horizon is required; - no possibility to install supports for the inclined part of the conveyor (supports only at the beginning and end of the conveyor) Conveyors of this type are an excellent tool for simplifying and optimizing the conveying chain. Contact us and we will help you to apply this solution correctly! - conveyor capacity from 100 to 2,000 t/h. - conveyor length from 5 to 500 m. - conveyor angle from 0 to 90 degrees. - material size from 0 to 100 mm.

Year of construction: 2025, condition: as good as new (ex-display), Our mobile winder, is one of our demonstration machines, condition good, slight scratches on the housing and on the chassis, Warranty 12 months, completely checked and serviced. On request with optional accessories such as a wide feeler strap. Warranty: 12 months (single-shift operation), The advantages at a glance: - Working area of only 750 mm around the pallet - Extremely compact design - Patented steering system - Compared to its competitors, it takes up to 40% less space - Easiest handling - German support - Upgrades are also optionally available later The LEO only needs 75cm (about a shoulder width) around the pallet to be wrapped. WORKSPACE Pallet size: Height: min. 500 mm / max. 2,000 mm Length: min. 600 mm / without limit Width: min. 600 mm / without limit Machine dimension: Height: 1,950 mm Length: 980 mm Width: 700 mm Pallet weight: min. 50 kg (optionally also lower possible) FILM DATA Wrapping programs: - Foot and head wrapping - Cross and one-way winding - with stop for cover sheet support Film width max. 500 mm Core diameter max. 76 mm Outside diameter max. 220 mm MACHINE DATA Tension: - Battery: 2x 12 volts - Charger integrated 220 volts - Drive: 2x 24 volts - Foil slide: 1x 24 volts Foil carriage: - own parameters for up and down movement - Mechanical film brake - stepless adjustment Control: - Touch panel with digital display - Speed dial buttons Bsdpfxjhfc Rie Aaqjww - Drawbar with navigation buttons - Pallet detection via tactile belt - Emergency switch - 6 storable working modes - Double collision protection Mast: Stationary construction Weight: 195 kg CE marked machine the wrapping of black products or the use of black stretch film. and can be charged with any cable with a Euro mains plug at a 230V household socket. Such a charging cable is of course part of the scope of delivery.

Condition: excellent (used), functionality: fully functional, maximum load weight: 2,500 kg, lifting height: 17,000 mm, Year of construction: 2022, operating hours: 2,000 h, This is a model in very good condition - operated by our operators. When buying from an exclusive distributor, you are sure of the quality of the purchased machine, warranty of spare parts and service. Possibility of arranging a presentation or rental. The most important information about the equipment: The M250 model is currently the most popular crane in Poland for the assembly of aluminum joinery above 10m. It stands out from the competition primarily for: - YAN-MAR diesel engine, more powerful than in the popular Maeda mini crane - fully hydraulically extendable JIB, immediately ready for operation - remote control as standard (brand - Scanreco used in the best machines in the world) - extendable tracks extending horizontally (in the models of competitors, the tracks extend sideways but the guides are at a 45-degree angle, which increases the height of the crane at maximum extension). - the strongest main mast search hook available on the market (2000 kg) - rigging mounted to the mast as needed. If a rope block is not needed (working on the search hook), the end of the rope is secured on the side of the main mast. - very compact design (all ropes and sensors hidden inside the mast) The advertisement concerns the BG Lift M250 Mini Crane with the following equipment: • 900 kg winch (65 m) • Electric motor (single-phase - 220 V) • Hydraulic jib • Search hook (for Jib) • Set of pulleys (single rigging) • Set of pulleys (triple rigging) Bsdpswnd Nlefx Aaqjww • White tracks Number of operating hours on the combustion engine: 1575 Number of operating hours on the electric motor: 425, M250/1

Condition: new, Year of construction: 2025, 20T Premium Plus Ramp, usable internal width 20m. TM-GROUP – the best choice on the market. ⭐️ Galvanized grid on the ramp’s upper section as well! ⭐️ ✅ Specifications: - Manufacturer: TM-GROUP - Maximum load capacity: 20 tons - Internal ramp width: 2000 cm - PREMIUM PLUS variant – galvanized grid also on the upper ramp section (highlighted in red in one of the last photos) - ELECTRIC and manual height control from 1m to 1.6m - Galvanized approach grid - Reinforced side railings on both sides - Solid rubber transport wheels - Central ramp handle allowing repositioning with a forklift - Adjustable tilt and flap height - Reinforced dual-sided ramp supports - Moving parts equipped with grease fittings - Ramp also equipped with a hand winch ✅ Approach Grid: Galvanized grating with anti-slip grooves. A secure and stable surface. Both forklift operation and foot traffic benefit from top-tier grip and solid support. Competitors mainly offer ramps with a metal sheet covered in mesh. Our product features a grooved grating, a much more durable solution. It prevents debris from staying on the ramp and ensures forklifts don't slip. ✅ Forklift Bracket – installable on both sides: Convenient and quick mounting for forklift transport in all directions. A specially designed bracket allows for maneuvering the ramp even in confined spaces. ✅ Chain for connection to TIR truck, railcar, or fixed warehouse ramp: A solid steel chain is another strong point of our ramp, preventing unwanted movement during loading operations. ✅ Durable Side Railings: Protective railing with an option to unscrew and mount a frame/roof (roof is optional). ✅ Electric Height Control: Smooth electro-hydraulic drive using a high-quality pump. Requires 230V, meaning it can be powered from a standard socket. Bwedpfx Aajwb A Eljqsw ✅ Dual-Action Manual Pump: Hydraulic pump for height adjustment when electro-hydraulic power isn't available – dual-direction lifting. Perfect solution for uninterrupted operation in any conditions. ⭐️ Available variants include: ⭐️ - Approach widths: 1700 cm, 2000 cm, and 2500 cm in Standard, Premium, and Premium Plus versions - Mobile ramps with capacities of 10 tons, 15 tons, 20 tons, and 25 tons - Approach grid thickness: 3 – 5 cm - Colors: red, blue, black, and green (custom colors available upon request) - Mobile ramp with tarpaulin cover As a manufacturer, we can produce custom ramps tailored to specific needs – various sizes, load capacities, or features. Can't find exactly what you're looking for in the listings? Ask our specialist for a tailor-made solution. Tags: Loading ramp, unloading ramp, mobile ramp, mobile loading dock, loading bay, mobile transfer ramp, mobile loading ramp.

Condition: used, Year of construction: 1997, EUROMAC CX 1000 PRESSURE 30t TABLE DIMENSIONS: 1000χ2000mm MULTITOOL 6 POSITIONS DIAMETER Φ24 SHEET METAL THICKNESS 6MM IN TOP CONDITION Bwsdpsncdvbjfx Aaqew WITH EXTRA TOOLS MADE IN ITALY

Condition: excellent (used), Year of construction: 2019, The MZ07 robot series features ultra high-speed motion capability with advanced through-arm dress capabilities to simplify routing of hoses and cables for material handling, assembly, vision and many other applications. Through arm cabling minimizes interference and potential snags with peripheral objects in your work cell, helping to protect pneumatic and signal cables from damage. Boasting an IP67 rating, the MZ07 robot is the fastest in class with unmatched 0.31 second cycle time in standardized speed testing, leading all competitors’ robots. Flexible mounting solutions allow the MZ07 to be floor, wall, or invert mounted to better suit customers’ needs for any given application. In addition to being the world’s fastest articulated robot, the MZ07 offers the largest working envelope in its class at 723mm with an impressive repeatability of ±0.02mm. The MZ07L extends the usable work space up to 912mm. The MZ07 and MZ07L offer full 6-axis articulation while the MZ07P and MZ07LP are specially designed for palletizing applications featuring a 5 axis design to simplify teaching palletizing routines by eliminating the J4 axis. In addition to Nachi’s comprehensive robot lineup, the MZ07 builds on the great heritage of large payload robots by providing an extremely versatile small robot with top of the line capabilities. Bwedjwwq A Rjpfx Aaqsw

Condition: new, Year of construction: 2025, 25T Premium Ramp, Usable Inner Width 2m – TM-GROUP, the Best Choice on the Market ⭐️ Galvanized Drive-On Grating! ⭐️ ✅ Specifications: - Manufacturer: TM-GROUP - Maximum Load Capacity: 25 tons - Ramp Inner Width: 2000 mm - Electric and Manual Height Adjustment: 1m – 1.6m - Galvanized Drive-On Grating - Reinforced Side Railings - Solid Rubber Transport Wheels - Central Forklift Hook for Easy Relocation - Adjustable Ramp Slope and Flap Height - Double-Sided Reinforced Supports - Movable Parts Equipped with Grease Nipples - Ramp Also Equipped with a Winch ✅ Drive-On Grating: Galvanized anti-slip grating with grooves. Provides a safe and secure surface. Forklifts and foot traffic benefit from maximum traction and stability. Competitors usually offer ramps with a sheet metal platform covered by mesh. Our product features the grooved grating, which is far more durable and allows dirt from forklift wheels to fall through, preventing slippage and buildup. ✅ Forklift Hook – Can Be Installed on Either Side: Convenient and quick forklift mounting allows for movement in all directions. The specially designed hook enables easy maneuvering even in tight spaces. ✅ Connecting Chain for TIR, Railway Wagon or Stationary Dock: A robust steel chain adds extra safety, preventing ramp movement during loading operations. Bedswbg Hgspfx Aaqeww ✅ Durable Side Railings: Protective railings with detachable options for installing a frame or canopy (canopy is optional). ✅ Electric Height Adjustment: Smooth electro-hydraulic lift powered by a high-grade pump. Requires only 230V – can be operated from a standard socket. ✅ Dual-Action Manual Pump: A hydraulic pump for height adjustment when power supply is unavailable – enables lifting from both directions. Ideal for all working conditions. ⭐️ Available Variants Include: ⭐️ Drive-on width: 1700 mm, 2000 mm, and 2500 mm – available in Standard, Premium, and Premium Plus. Load capacities: 10 tons, 15 tons, 20 tons, and 25 tons. Grating thickness: 3–5 cm. Colors: red, blue, black, and green (custom colors available upon request). Mobile ramps available with tarpaulin cover. As a manufacturer, we also offer custom-made ramps tailored to your specifications – in any dimensions, load capacity, or variant. Looking for a personalized solution you can’t find anywhere else? Contact our specialist today. Tags: Loading ramp, unloading ramp, loading dock, mobile ramp, dock ramp, mobile loading ramp, mobile unloading ramp.

Condition: new, Year of construction: 2025, 10T Ramp, Usable Internal Width 1.7m – TM-GROUP, the Best Choice on the Market ✅ Specifications: - Manufacturer: TM-GROUP - Maximum Load Capacity: 10 tons - Internal Ramp Width: 1700 cm - Reinforced side railings on both sides - Ramp rollers for easy movement - Central ramp handle for forklift repositioning - Adjustable slope and flap height - Dual reinforced ramp supports - Moving parts equipped with grease fittings - Ramp also equipped with a winch - ELECTRIC and manual ramp height control ✅ Ramp Surface Grating: Grating with anti-slip grooves. Safe and secure surface. Both forklifts and pedestrian movement enjoy the best possible grip and solid support. Competitors typically offer ramps with a metal sheet covered with mesh. Our product features grooved grating – a much more durable solution that prevents dirt from staying on the ramp and ensures the forklift doesn't slip. ✅ Forklift Mount – Installable on Both Sides: Convenient and quick forklift attachment allows for ramp transport in all directions. The specially designed handle enables maneuvering the ramp even in tight spaces. Bwjdpjwa Nr Njfx Aaqow ✅ Chain for Connecting to TIR Truck, Railway Car, or Fixed Warehouse Dock: A solid steel chain is another strength of our ramp, providing additional safety by preventing the ramp from shifting during loading operations. ✅ Sturdy Side Railings: Safety railing with the option to detach and install a frame/roof structure (roof is optional). ✅ Electric Height Adjustment Control: Smooth electro-hydraulic drive powered by a high-end pump. The pump requires only 230V, making it usable with a standard power outlet. ✅ Dual-Action Manual Pump: Hydraulic pump for height adjustment in case electro-hydraulic power is unavailable – dual lifting mechanism. This is an ideal solution for working in all conditions. ⭐️ We Offer the Following Variants: ⭐️ Driveway widths: 1700 cm, 2000 cm, and 2500 cm – Standard, Premium, and Premium Plus. Mobile ramps with load capacities of 10 tons, 15 tons, 20 tons, and 25 tons. Ramp grating thickness: 3–5 cm. Colors: red, blue, black, and green (custom colors available on request) Mobile ramp with tarpaulin cover. As a manufacturer, we can produce ramps tailored to special, individual orders – in different sizes, load capacities, and configurations. Need a custom solution you can’t find anywhere else? Contact our specialist. Tags: Loading ramp, unloading ramp, loading dock, mobile ramp, loading bay, transfer dock, mobile loading dock, mobile loading ramp.