Used Mia for sale (130)

Condition: not inspected (used), power: 2.2 kW (2.99 HP), Projection 650 mm Speeds 12000/18000 rpm. Hnjdsq U Ih Depfx Abrjh Table 750 x 750 mm Table extension left

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Nominal volume flow Vnenn 750 m³/h, suction nozzle D=100 mm, minimum volume flow Vmin 565 m³/h, negative pressure 14.5 mbar, motor 1.1 kW, nominal speed 2860 rpm, connection 380V 3Ph 50Hz - Hjdpfx Aov Azfzjbrenh

Condition: not inspected (used), Year of construction: 1994, Connected load 380V / 2.2 kW Weight approx. 212 kg Hodpovz Tfqefx Abronh Cutting width 900 mm Sliding table Angle stop swivels to 45° Homemade table extension 350 mm long 1000 mm wide Homemade saw blade guard PSV Unit swivels to 45° Manual height adjustment Extraction nozzle 100 mm Parallel stop missing Ruler stop missing

Condition: good (used), Year of construction: 1992, machine/vehicle number: 145 K, Offer 24018 Hjdju At Thspfx Abrsnh Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 - Drill spindle stroke 150 mm - 9 drill spindle speeds 104 - 1400 rpm - 2 feeds 0.1 / 0.2 mm/rev - throat depth 290 mm - max distance table - drill spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - right - left rotation - Coolant device - Quick-action drill chuck 1-13 - lighting

Condition: good (used), 1 x belt grinding machine Frommia with dust extraction. Heavy-duty design in technically good condition. Hnodpjwyw Ewefx Abrjh

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system. Hjdpjua D Aljfx Abrjnh

Year of construction: 2024, condition: new, WPS Eddy Current Separator, Magnetic Series. Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminium, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. WPS Separators are used in the recovery of: • non-ferrous metals from the recycling of electronic waste Hsdpfx Asiqxtbjbrsnh • non-ferrous metals from car recycling • metals from foundry waste • aluminium in glass recycling processes • non-ferrous metals from steel waste • non-ferrous metals from municipal waste To ensure the longevity of the equipment, the ZŁOMIARZE, as one of few companies, has introduced an improvement in the form of the central cooling of the bearings of the magnetic rotor, thanks to which the service life of the machine has been extended even several times. Technical Specification: • Magnetic field source – NdFeB magnets • Smooth adjustment of magnetic rotor speed – 0-3000 rpm • Belt speed adjustment • Belt position control system • Magnetic rotor cleaning cleats • Belt cleaning scraper • Material divider adjustable in two levels • Bearing cooling system (greatly extends bearing life) • Control panel with safety check For our non-ferrous metal separator we offer additional devices to make you separation process easier: • vibratory feeder • belt conveyors • magnetic drum/belt separators For more information please download our catalog. If you're interested in our products, please contact us!

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines Hodoua Tbwspfx Abrsnh The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Year of construction: 2024, condition: new, functionality: fully functional, Description of Use: Overband Magnetic Separator (MAGNETIC series) is applied to loose materials to automatic removal of ferrous impurities in the process of waste recycling. Apart from metal recovery the Separator has a protective function for equipment in further steps of recycling process. They are usually installed on top of transport conveyors. Belt separators are used in many fields: -scrap removal from coal and aggregate -wood and plastic purification -iron particles recovery from cable shredding Hnsdoh D H Rcjpfx Abreh -iron rejection from WEEE recycling process -municipal waste purification Contact us for more information

Year of construction: 2022, condition: new, ZLOMIARZE Recycling Technology - LRK Recycling line The Mini Line is a high quality set of devices designed for the recycling process. Shredding and separation are essentials in this business, that’s why Mills from TORNADO series was designed for rapid reaction on feeding materials with being in a chamber for short time. Suitable sieves placement and balanced cutting rotor RPM provide uniform material fraction. Innovated implementation of water system with adjustable pressure in the Wet Separators GOLD RIVER series provides highly accurate separation of difficult materials. ❖LRK - 50 The set consists: • 11kW Grinding Mill – Tornado 400 • Compact Dust collector • Transport Conveyor • Wet Separator – Gold River 300/1250 Technical Specification: • Complete Set Power – 13 kW • Supply – 400 V ; 50 Hz • Performance – 50 kg/h (this is a real value, checked on basic materials). • Dimensions – 3500 × 600 × 1950 mm • Weight – 950 kg ----- ❖LRK - 100 The set consists: • 15kW Grinding Mill – Tornado 500 • Compact Dust collector • Belt Conveyor • Wet Separator – Gold River 500/1250 Technical Specification: • Complete Set Power – 20,2 kW • Supply – 400V ; 50Hz • Performance – 100 kg/h (this is a real value, verified on basic materials). • Dimensions – 5000 × 4000 × 2000 mm • Weight – 1300 kg ----- ❖LRK - 200 The set consists: • 15 kW Grinding Mill – Tornado 500 • Dual dust collector • 1st line belt conveyor • 18,5 kW Grinding Mill – Tornado 500 • 2nd line belt conveyor • Wet Separator Gold River 500/2500 Technical Specification: • Complete Set Power – 40kW • Supply – 400V ; 50Hz • Performance – 200 kg/h (this is a real value, checked on basic materials). • Dimensions – 5000 × 4000 × 2000 mm • Weight – 1300 kg Hnedpjhix Daefx Abreh ✔Spare parts included. Recyclable resources: ✔ Any kind of Aluminium cables ✔ Automotive cables with adhesive tape ✔ Cords and network cables ✔ Coax cables, Christmas lights ✔ Copper cables lined with gel or silicone ✔ Winding coil of a thickness 15 microns, contaminated with adhesive paper or plastic Contact us for more information!

Condition: new, Year of construction: 2024, ZŁOMIARZE Recycling Technology MCW 52/76 Shredder The MCW series quad shaft shredder is based on many years of experience in the plastics and scrap industry. MCW Shredder is a highly reliable, universal pre-shredder for shredding a wide range of materials such as plastics, materials, rubber, wires, electronic scrap, post-production waste as well as slight magnetic materials. Types of MCW Shredders: MCW-52 Technical Specification: • Motor output – 22 kW • Cutting Chamber – 510 × 760 mm • Performance – approx. 400 kg/h (depending of material type) • Weight – approx. 1400 kg MCW-76 Technical Specification: • Motor output – 37 kW • Cutting Chamber – 965 × 780 mm • Performance – approx. 800 kg/h (depending of material type) Additional equipment: • Loading belt conveyor • Dust Extraction • Magnetic Plate with Quick Clean System Hsdpfehix Hrox Abrenh • Magnetic Separator SM-370 • Unloading Belt Conveyor Contact us for more information!

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Hnjdpfowz Ev Tex Abroh Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Condition: good (used), functionality: fully functional, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, Miyano MTV 350 CNC vertical milling machine Control: Yaskawa Hodpfew Hl S Eox Abrjnh Tool holder: BT-30

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 233846, We sell a used system BIO TURBO 6000, MFG: August 2020, serial number: 233846 Areas of use: medical, food: storing vegetables and fruits. The model BIO TURBO 6000 Maximum volume up to 200000 ft³ (6000 m³) per 24 hours. The Airflow 150 CFM (4 CMM). Location requirements are: electrical source 100-240 VAC. The circuit breaker 15 A Maintenance air filter must be changed every 6 months. The ozone Plate(s) must be changed every 12 months. The number of ozone plates are 4. Specifications - dimensions: generation chamber 10 x 12 x 10 inches (25 x 30 x 25 cm) Catalytic converter/ controller 12 x 19 x 16 inches (30 x 48 x 40 cm) Reaction Chamber 4 x 8 x 2 feet (122 x 244 x 61 cm) Total net weight 160 lb (60 kg) Construction materials: generation chamber aluminium Catalytic converter/controller: aluminium Perforated generator plate: stainless steel Controls Remote Control Power Switch Hnsdsurf I Uepfx Abrsh LED’s for quick diagnostics Remote On and Off control Easy service Easy changing of ozone plates and filters Four models for proper coverage Aluminium and Stainless Steel generation chamber Easy to install and operate Low maintenance The Bio Turbo 6000 is referred to, as the BT 6000. The 6000 indicates the amount of cubic meters the unit can properly control within a 24 hour period. The BT 6000 was designed to remove ethylene from cold rooms and storage areas where fruits and vegetables are stored in order to extend their storage life. The BT 6000 was designed to remove ethylene from cold rooms and storage areas where fruits and vegetables are stored in order to extend their Bio Turbo effectively removes ethylene gas (to prevent premature ripening), bacteria, mold spores and viruses The Technology Bio Turbo is a patented technology for cleaning the air from all sorts of airborne organic compounds. Bio Turbo effectively removes ethylene gas (to prevent premature ripening), bacteria, mould spores and viruses. What differentiate Bio Turbo from competitors is its affordability and the ease of maintenance making it a great solution for commercial applications. Price: 11,500 Euro + VAT, negotiable, FCA: Oradea/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), For sale: PWB Swiss measuring device, model TOOL MASTER 310 Very good condition, complete, ready for operation Package includes: • TMA 21 control panel • LED displays • Dial gauge • Measuring socket for holders Features: • X and Z axis measurement • Tool setting and calibration for CNC tools • Easy operation • Length and diameter measurement Original user manual included Brand: PWB Swiss Model: Tool Master 310 Hnjdow Humlopfx Abrsh

Condition: good (used), Cyklos GPM 450SA Semi-Automatic Creaser Machine in very good condition, ready for production. Hnsdpfx Aeyg D Ahobroh Description: Working width up to 450 mm. Programmer with the ability to save up to 15 creasing/perforation positions. Sheet is fed manually and then automatically retrieved. Easy-to-use control panel with program storage. Sturdy metal construction. Creasing or perforation across the width of the sheet (creasing tool included). Creasing of digital prints and laminated sheets is possible. 4 different creasing widths are standard. Large work table.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: freezer, lighting, Set: EPTA Costan / Carrier Top Freezer + AHT Miami 250 freezer Deep freezer plug ready multi-purpose deep freezer furniture discounter Costan EPTA / CARRIER Top Freezer 2580 G Modern solution for expanding freezer capacity. Hjdpfxoyi Unmj Abrsnh Plug-in ready-made refrigerators. Technical data - photo added The freezer unit serves as an extension of the freezer and saves space. Used machine - very good condition - tested and fully functional. REFRIGERANT - R290 LED lights. Freight costs depend on the weight, the volume and, above all, the distance. The following information is relevant when requesting: Delivery address (postal code and name of the town), but further details require a telephone conversation, so we ask you to inquire about transport costs and other delivery modalities to contact us by telephone. Our contact details can be found under the seller's legal information. Payment in cash, possible upon delivery on site. We sell and export worldwide; due to our very large storage capacity, we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon.-Fri.: 8 a.m.-4 p.m sat.: closed

Condition: excellent (used), Year of construction: 2019, We are selling a PCB spot welding system from AMADA, mounted on a workbench. The welding head is type FD 120-A/So, year of manufacture 2019. Hsdpfeyhwduox Abronh

Condition: used, Year of construction: 1996, The Vipromat-S semiautomatic screen printing machines, manufactured by Viprotech in 1996, are currently in production and located in Germany. These machines have a format of 700 x 1000 mm and can handle a maximum sheet size of 885 x 1250 mm with a maximum stock thickness of 25 mm. The maximum printing size is 700 x 1000 mm, and the maximum frame size is 1125 x 1500 mm. The machines have an air consumption of 6 bar at 20 nl/min and an adjustable squeegee angle between 75 and 90 degrees. The off-contact is variable from 3 to 28 mm, and the fine registration adjustment ranges from to . The squeegee speed can be set between 0.2 and 1.2 meters per second, allowing for a maximum of 850 prints per hour. The machine dimensions are 170 cm in length and 160 cm in width, with a weight of 435 kg. The electrical connection required is 230 V, 50 Hz, 1ph+N+Pe, 3 kW. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 700 x 1000 mm Equipment: Width 160 cm Length 170 cm Maximum frame size 1125 x 1500 mm Maximum printing size 700 x 1000 mm Maximum sheet size 885 x 1250 mm Off-contact variable 3 - 28 Air consumption 6 bar, 20 nl/min Squeegee speed m/sec 0,2 - 1,2 Squeegee angle adjust 75 - 90?? Electrical connection 230 V, 50 Hz, 1ph+N+Pe, 3 kW Fine register adjustm Max. stock thickness 25 Machine weight 435 KG Max. nr of prints/hour 850 semiautomatic screen printing machines Hjdpfxevfxp Ao Abrsnh

Condition: used, Year of construction: 1996, The Vipromat-S semiautomatic screen printing machines, produced by Viprotech in 1996, are currently in production and located in Germany. These machines have a format of 700 x 1000 mm and can accommodate a maximum sheet size of 885 x 1250 mm with a maximum stock thickness of 25 mm. The maximum printing size is 700 x 1000 mm, and the maximum frame size is 1125 x 1500 mm. The air consumption is 6 bar at 20 nl/min, and the off-contact is adjustable from 3 to 28 mm. The fine registration adjustment ranges from to . The squeegee speed can be set between 0.2 and 1.2 meters per second, enabling a maximum of 850 prints per hour. The machine dimensions are 170 cm in length and 160 cm in width, with a weight of 435 kg. The squeegee angle can be adjusted between 75 and 90 degrees. The electrical connection required is 230 V, 50 Hz, 1ph+N+Pe, 3 kW. The delivery terms are FCA (Free Carrier), which means the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 700 x 1000 mm Equipment: Hjdpovfx Hzsfx Abrenh semiautomatic screen printing machines Maximum printing size 700 x 1000 mm Maximum frame size 1125 x 1500 mm Maximum sheet size 885 x 1250 mm Max. stock thickness 25 Off-contact variable 3 - 28 Max. nr of prints/hour 850 Fine register adjustm Squeegee speed m/sec 0,2 - 1,2 Squeegee angle adjust 75 - 90?? Machine weight 435 KG Electrical connection 230 V, 50 Hz, 1ph+N+Pe, 3 kW Air consumption 6 bar, 20 nl/min Length 170 cm Width 160 cm

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 76 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, power: 27 kW (36.71 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 38 mm/s, pressure: 150 bar, wall thickness: 4 mm, working length: 3,000 mm, Equipment: documentation/manual, 76x4mm Semi Automatic NC Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Hjdpfjvwg D Sjx Abrsnh Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 32 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 99 mm/s, pressure: 130 bar, wall thickness: 2 mm, working length: 1,920 mm, Equipment: documentation/manual, 32x2mm Semi Automatic NC Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are B, BR, BRF. B series makes bending operation automatically. BR series makes bending and rotating operation automatically. BRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for BR and BRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Hodpfxevx D D Ss Abrenh Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: used, Year of construction: 2015, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm control: FANUC 31i B5 tool change unit: 21 fach rapid traverse in x-y-z axis: 54 m/min taper ISO: BT 30 turning speed range:: 10.000 1 / min spindle drive: 11 / 3,7 kW max. table load: 300 kg surface area: 600x 400 mm Dimensions (L/W/H): 1,6 x 2,1 x 2,25 m rapid traverse: 48 m/min total power requirement: 11 kVA weight of the machine ca.: 2,1 t vertical CNC-milling-drilling machining center, Infrared Touch probe, Hnodpfx Aougpk Usbreh el. handwheel, autom. door on right side, no internal Coolant Supply, Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run" *

Condition: used, functionality: fully functional, SEMI-AUTOMATIC capsule filling machine. 2 capsule sizes set offered with the machine: Size 0 and Size 00. Hnsdjyf Uhrjpfx Abrjh

Condition: excellent (used), Make IBARMIA Model S-25/32 Type : BATTERY OF 2 DRILLS Hnjdpfx Abovi R D Toroh Rebuilt machine 1000mm table and 900mm vertical stroke Suitable to R.D. 1215/97 Certificate of the equipment by OCA Authorized Control Body. Instruction book