Used Mia for sale (125)

Condition: excellent (used), I am offering for sale a professional Bohm Wiedenmann Super 300 sweeper-collector with a working width of 1.5 m. This machine is designed for collecting cut grass, leaves, branches, thatch after scarification, and other debris from green areas, sports fields, parks, golf courses, and large lawns. The Super 300 model is highly regarded for its robust construction and high performance. Technical data: * Manufacturer: Bohm Wiedenmann GmbH Lsdpfx Akez Sngaoqjhn * Model: Super 300 1.5 * Year of manufacture: 1998 * Working width: 1.5 m * Permissible total weight: 1450 kg * Permissible axle load: 1250 kg * Permissible drawbar load: 200 kg * Maximum transport speed: 40 km/h * PTO shaft * Large collection container * Hydraulic control The machine shows normal signs of wear and tear consistent with its age. It is being sold in the exact condition as shown in the photos.

Condition: used, For sale is a modular test and measurement system from National Instruments, based on the PXI Express platform. The system was originally purchased in 2016 and subsequently expanded in 2018. The device can be used for test automation, multi-channel data acquisition, quality control, GigE camera support, and communication with industrial devices. Current configuration: National Instruments PXIe-1085 – 18-slot PXI Express 3U chassis with a system throughput of up to 24 GB/s, National Instruments PXIe-8880 – embedded PXI Express controller with a 64-bit Windows 7 operating system, 2 × 8 GB RAM expansion for the PXIe-8880 controller, 6 × National Instruments PXIe-8234 – dual-port GigE Vision modules designed for image acquisition from industrial cameras, National Instruments PXIe-4499 – 16-channel, 24-bit module for sound and vibration measurements, 204.8 kS/s, with IEPE and TEDS support, a complete set of two InfiniBand–BNC cables for the PXIe-4499 module, National Instruments PXIe-4357 – 20-channel, 24-bit temperature measurement module for RTD sensors, National Instruments TB-4357 – terminal block for the PXIe-4357, Lhjdpfx Akezv Idteqen National Instruments HDD-8261 – 6-disk, high-speed SSD data storage module with a total capacity of 2.9 TB according to the original configuration, National Instruments PXIe-7846R – reconfigurable I/O module with a Kintex-7 160T FPGA, equipped with 8 analog inputs, 8 analog outputs, and 48 digital I/O lines, National Instruments SCB-68A – shielded terminal block, shielded 68-pin terminal block for R Series DIO and HSDIO devices, 2 m SHC68-68-RMIO cable, shielded 2 m R Series High Speed Digital Cable, power cable. Additionally added: NI PXI-6224 M Series Multifunction DAQ – 32 analog inputs and 48 digital I/O lines 12 × NI 8234 Dual Gigabit Ethernet Controller for Windows – a total of 24 Gigabit Ethernet ports NI PXI-8433/2, 2000 V Isolated RS422/485 – isolated, dual-port RS422/RS485 interface Possible applications: - Multi-camera GigE Vision systems - Automated quality control - Testing of electronics and components - Acquisition of analog and digital signals - Communication via Gigabit Ethernet, RS422, and RS485 - Research and development workstations - Automation of production tests The devices were purchased as part of a single, complete National Instruments system. Original purchase documentation is available for review. The system was used in research and development activities related to electronics, vision systems, metrology, and automation. Technical and visual condition as shown in the photos. Detailed catalog numbers and serial numbers of individual devices can be provided upon request. Sale of the complete system is preferred. Sale of selected modules is also possible after prior arrangement.

Condition: used, Year of construction: 1973, Used Machine Lsdpfx Akjzy Dzvjqjhn Year of Manufacture: 1973 Features and Technical Specifications - Table milling machine for profiling, grooving, and rebating with appropriate milling tools - Three speed settings to accommodate different tools and machining operations - Spindle speeds: approx. 2,500 / 4,500 / 6,000 rpm - Milling arbor diameter: 30 mm - Height adjustment of the milling spindle: approx. 70 mm - Milling stop ruler with fine adjustment for tool diameters up to 250 mm - Weight: approx. 385 kg - Caution: The machine does not have a motor brake! - Availability: available shortly

Condition: new, Year of construction: 2025, SEMIAUTOMATIC BINDING MACHINE Model; MAGRAF AS-48 NEW Ledjbyhgwepfx Akqshn It allows great flexibility of use,11 different wire diameters without the need to change size-tools.

Condition: good (used), Cyklos GPM 450SA Semi-Automatic Creaser Machine in very good condition, ready for production. Description: Working width up to 450 mm. Programmer with the ability to save up to 15 creasing/perforation positions. Sheet is fed manually and then automatically retrieved. Easy-to-use control panel with program storage. Sturdy metal construction. Creasing or perforation across the width of the sheet (creasing tool included). Lhjdoz Iczujpfx Akqon Creasing of digital prints and laminated sheets is possible. 4 different creasing widths are standard. Large work table.

Condition: new, Year of construction: 2023, REF: MM5675 Vigo semi-automatic T-capping machine. Suitable for applying T-caps to 70cl and 100cl bottles.  Manufacturer - Vigo Model - PG2010/TV SEMIAUTOMAT T-CAPPER.  Date of manufacture - 2023. Electric supply - 220 V / 50 hz / 1 phase. Lhodsr I Ddkjpfx Akqjn Supplied with manual, 1 x T stop corker adjustments for 2 x cap types (miniature and normal), 1 x Head and down channel for different “T” caps sizes and castors.  Purchased brand new in 2023 but never used.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Column drill press MK 4 IBARMIA AZ 34 CE Infinitely variable speed from 50 - 2000 rpm 3-stage feed Threading device Coolant system Drive: 2.3 kW Overhang: 300 mm Drilling stroke: 150 mm Quick-change drill chuck Röhm, drill vise 120 mm Table: 480 x 400 mm, rotatable Condition: almost new Lhjdpfx Asz A Tu Uskqsn Dimensions: H 1.92 m, D 0.85 m, W 0.42 m Weight approx. 400 kg Can be inspected while powered on Free loading at D - 88433 Schemmerhofen

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] Lhjdpfx Aszhxwzekqon POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : Nikken 5AX-201 - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : ARRIERE

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] Lhjdpfx Akszdvmfeqsn - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : GAUCHE - Tool probe : MIDEX BKS1S

Condition: new, Year of construction: 2026, functionality: fully functional, The GWDress-250 smartline is the intelligent solution for the precise dressing of grinding wheels up to Ø 250 mm. Thanks to selectable manual or automatic control, dressing processes can be designed with maximum flexibility and efficiency. Performance Data: Rotary axis & feed axis CNC controlled Diamond Grinding Spindle: HSK-50 or customer-specific (e.g., SK-40, Perfect Arbor, etc.) Max. Dressing Wheel Diameter: ø300 mm Max. Dressing Wheel Width: 20 mm Max. Grinding Wheel Diameter: up to ø250 mm Grinding Wheel Speed: 0–1,500 rpm (infinitely variable) Travel Range (Left/Right): 135 mm Travel Range (Forward/Back): 135 mm Dressing Wheel Diameter (Silicon Carbide): ø180 x 10 x ø32 mm Swivel Range: approx. 98 degrees on both sides Dressing Wheel Speed: 0–2,800 rpm (infinitely variable) Dressing Wheel Oscillation Frequency: 0–50 strokes/min (infinitely variable) Dressing Wheel Oscillation Length: 0–50 mm (adjustable) X, Y Axis Optical Scale Resolution: 0.001 mm Capabilities: Dressing of radii and wheel stacks (multi-wheel packs) Power Supply: 380V, 50Hz; Total Power: approx. 1.5 kW DXF Import: Included Camera System: Included (with live transmission via 23" monitor) Software: Latest generation GWDress-Studio with automatic AI measurement included Country of Origin: Austria Lhjdpfx Aew E E S Ajkqen

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, 🔧 Multivac Semi-Automated Blister Packaging Line (2021 – Unused) Complete Medical Device Packaging System – Fully Stainless Steel Available now at Used Machine Tools Ireland Ltd, this Multivac semi-automated packaging line is in as-new condition, originally installed in 2021 at a medical device facility but never used. This is a high-spec, turnkey blister packaging solution, ideal for medical, pharmaceutical, food and high-spec manufacturing environments requiring cleanroom-compatible, stainless steel equipment. This Multivac semi-automated blister packaging line (2021) includes dual T700 tray sealers, MR625 labelling system, robotic handling modules, inspection stations, and full conveyor system, designed for medical-grade blister packaging in stainless steel environments. Suitable for 150–180mm blister packs with double sealing process. 🚀 Key Highlights ✔️ As new – never used (2021 installation) ✔️ Full stainless steel construction – medical grade ✔️ Complete automated blister packaging line ✔️ Dual Multivac T700 tray sealers ✔️ Integrated labelling, inspection & robotic handling ✔️ Designed for precision medical device packaging ✔️ Includes large quantity of spare parts & tooling ⚙️ Packaging Process Overview This line is designed for high-efficiency double blister packaging: 4-place carrier tray automatically loaded with empty blister packs Manual filling of blister packs with product Tray moves to Multivac T700 Sealer #1 Automatic sealing + labelling via Multivac MR625 Cross Web Labeller Small blister packs are automatically transferred into larger blister packs (double pack) using a Multivac H242 Robotic Handler (double pack) Packs placed into 2-place carrier tray Tray moves to Multivac T700 Sealer #2 for final sealing Finished trays move to manual unloading & boxing stations via a Multivac H242 Robotic Handler Three inspection stages ensure quality control Lsdsyzf Ucspfx Akqshn 📦 Product Size Capability Blister Pack Sizes: 150 x 150 x 70mm 180 x 180 x 80mm 🏭 Full Equipment List 🔹 Multivac Equipment 2 x Multivac T700 Automatic Tray Sealers High-performance automatic tray sealing system 1 x Multivac MR625 / MR6318 Cross Web Labeller Fully automatic cross web labelling 2 x Multivac H242 Robotic Handling Modules Automated product transfer High-speed pick & place functionality Designed for integration with packaging lines 2 x Multivac MTD351 Tray Denesters Automatic tray separation and feeding Reliable high-speed tray handling 🔹 ASYS Tecton Automation Equipment 2 x ASYS Tecton Tray Stackers 1 x Horizontal Tray Stacker (6 x 5 carriers) 1 x Horizontal Tray Stacker (4 x 5 carriers) 3 x ASYS Tecton Inspection Stations 🔹 Additional Equipment 23 x Conveyor Sections (various lengths) Multiple HMI Control Panels throughout line 13 x Stainless Steel Handling Trolleys Extensive spare parts package included 💡 Typical Applications Medical device blister packaging Pharmaceutical packaging lines Cleanroom packaging systems Double blister / sterile barrier packaging High-spec manufacturing environments 📦 Condition Installed 2021 Never used – as new condition Fully maintained & preserved Now dismantled - videos of line in operation are available Note: Specifications and information provided in each listing are supplied in good faith; however, their accuracy cannot be guaranteed. Some tables in the videos/photos are not included No printers are included

Condition: ready for operation (used), For sale: a pea processing line, which includes: - Air separator - Destoner Ledpfozhv E Nsx Akqohn - Sieve - Flotation washer - 2 x Hydro transport systems The photos show the actual equipment being sold.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 21,000 rpm, number of axes: 4, This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document). Machine Benefits Technical Machine Benefits • 4 cnc axes, with chick horizontal axis dividing head and support bearing. • 21 tools • X =m 500 mm / y = 400 mm / z = 330 mm • Central coolant system with pump and filtration Lhedpfxjx D N Ntj Akqsn • Oil tank. Technical Specification Through-spindle Coolant Yes

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,225 kg, next inspection (TÜV): 03/2026, color: black, gearing type: automatic, number of seats: 5, total length: 5,450 mm, total width: 2,275 mm, total height: 1,987 mm, loading space length: 2,004 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: NW26.TY17526 Errors and omissions excepted! LOCATION: 04425 Taucha, Gerichtsweg 4 Phone number for inquiries: Mr. Ralph Bergel or bergel(at) SPECIAL EQUIPMENT * Roof rack - integrated and foldable * Electrical preparation kit for trailer hitch, including wiring harness and towing module * Heated windshield * Load compartment lighting (LED) - extra bright * Seat Package 16A: Driver's seat, 4-way manually adjustable, including lumbar support and adjustable interior armrest - Front passenger double seat, fixed - Seat heating for driver - Seat heating for front passenger (outer seat) - Tray on the passenger seat (foldable) - Lumbar support for driver - Side airbags, left and right - Head/shoulder airbags, front, left and right - Upholstery, Plus Style, seat center panel in Black Onyx, rest in Ebony Ledpozq Tqbjfx Akqohn * Socket: 12-volt connection in the cargo/passenger compartment * Technology Package 6: Exterior mirrors, electrically adjustable, heated, and foldable - Audio system with 13-inch multi-function display, Ford SYNC 4 including navigation - Blind Spot Information System including Cross Traffic Alert, rear - Pre-Collision Assist, camera- and radar-based - Driver Alert System - Lane Keeping Assist including Lane Keeping and Lane Change Assist - Lane Keeping Aid - Traffic Sign Recognition - Wrong-Way Alert - Park Pilot System front/rear - Adaptive Cruise Control including Stop&Go function - Intelligent Speed Limiter with speed limit display - 360-degree camera - Steering wheel, Sensico in leather-look FURTHER EQUIPMENT * 2-stage unlocking for passenger and cargo compartment * Airbag (passenger side) * Airbag, driver side * All-wheel drive * ABS with electronic brake force distribution * Battery: H7 AGM single battery * Floor, rubberized - first and second row of seats * On-board computer with fuel consumption and mileage information (e.g., remaining range) as well as outside temperature display * Overhead console * Double-wing rear door with door hinges (without windows) - 90 degrees - unlockable to 168 degrees * Tachometer * ESP - Hill Start Assist - Safety Brake Assist - Traction Control * Vehicle modem - WLAN hotspot, 5G modem - Information about the current status or location of the vehicle as well as control of selected vehicle functions via the smartphone with the Ford App - Current traffic information in real time (in conjunction with the navigation system) - WLAN hotspot (up to 5G/LTE, for up to 10 mobile devices) * Windows: Side windows, 2nd row, fixed, left and right * Power windows, front, with quick-down function for the driver's side * Parking brake, electric * Ford Power Start function * Grab handle, driver and passenger side * Glove compartment with lid * Interior lighting, passenger compartment * Interior lighting, front * Automatic climate control, front - with recirculation heating - with R-1234yf refrigerant * Steering wheel, plastic * Center console, small * Driver Alert System * Emergency Assistance eCall * Particulate filter: Diesel particulate filter * Radio accessories: 4 speakers * Wheel covers, full-size * Tire repair kit * Tire pressure monitoring system * Wheels: Steel wheels 6.5 J x 16 with 2/65 R 16 tires * Gearshift lever on the steering column * Windshield wipers with rain sensor * Headlights with LED low beam - including high beam assist * Sliding door, right * Rear mud flaps * Front mud flaps * Side wall paneling, half-height * Power steering * Seat belts - Seat belt pretensioners and force limit

Year of construction: 2026, condition: new, Compact, mobile system for filling and capping liquid, semi-liquid and viscous products in glass jars or bottles. The machine combines a volumetric piston filler and a pneumatic capper in one workstation and is suitable for juices, purees, jams, honey and sauces. The filler can be connected directly to a kettle or tank. It supports hot filling at temperatures up to 90°C and can process products containing soft particles. After filling, Twist-Off caps are closed by the pneumatic capper, whose adjustable torque enables consistent sealing. The machine can be adjusted for different jar and bottle heights. Technical specifications Lhsdpfx Aksz Nd D Usqon • Dosing range: 50–1500 ml, depending on the selected variant • Cap type: Twist-Off (lug) caps • Operation: semi-automatic, pneumatic • Maximum filling temperature: 90°C • Product-contact material: AISI 316L stainless steel • Chassis: mobile stainless-steel trolley with lockable caster wheels The hygienic stainless-steel construction is designed for food processing. Its mobile frame facilitates repositioning and provides convenient access for cleaning.

Year of construction: 2021, operating hours: 808 h, condition: ready for operation (used), functionality: fully functional, For sale is a vibration tunnel manufactured according to a custom design, intended for continuous transport and irradiation of bulk materials and other products suitable for vibration transport. The device was made to order, and its design was created with a specific technological process in mind. The entire unit is made of acid-resistant steel. The tunnel is equipped with 20 Philips TUV lamps, each with a power of 75 W, placed above the transport surface. During operation, the product is continuously transported through the tunnel and simultaneously exposed to UV-C radiation. 1. UV-C Application The UV-C system can be used for surface irradiation of products to reduce the number of microorganisms. Originally, the device was designed for use, among other things, for: • seed material, • grains, • herbs, • vegetables, • other suitable bulk products. The effectiveness of the UV-C process depends on factors such as the type of product, its properties, the thickness of the layer, and the exposure time. The possibility and effectiveness of using the device should be verified each time for a specific product and technological process. 2. Adaptability to Other Applications A significant advantage of the device is its individually designed, modular construction, which allows for further adaptation to the user's needs. Lhjdpoz A Tgwjfx Akqon After removing or modifying the UV-C system, the structure can be used as: • a vibration conveyor for bulk materials, • a vibration feeder, • a dispenser, • a device for evenly distributing the product, • an element of a process line that feeds the product to the next stage of the process, • a vibration screener – after using appropriate screens, • a device for transporting seeds, grains, spices, herbs, granules, and other materials such as pellets, frozen, and fresh vegetables and fruits suitable for vibration transport. The construction can serve as a basis for further individual adaptation according to the requirements of a specific production process. 3. Construction The device is entirely made of acid-resistant steel, using two Italvibra vibration motors and Rosta suspensions. Philips TUV lamps, each with a power of 75 W, are located above the transport surface. Shatterproof lamp covers have been used to increase safety in a production environment. The construction provides access to the working elements and allows for further modifications to the device depending on the planned application. 4. Device Condition Upon request, we can provide additional photos, videos, technical information, and discuss the possibilities of adapting the device to a specific application. 5. Technical Specifications Parameter Data Type of device UV-C vibration tunnel Design Custom design / made to order Construction Acid-resistant steel Tunnel length 420 CM UV-C lamps 20 × Philips TUV Lamp power 75 W Total UV-C lamp power 1500 W Product transport Vibration conveyor Vibration motors 2 × Italvibra Power adjustment Yes – adjustment of vibration force Suspension Rosta Operating mode Continuous operation Discharge Directly into a bag Overall dimensions 420 X 115 X120 Weight 400 KG Power supply 380V

Condition: excellent (used), warranty duration: 6 months, type of input current: AC, ambient temperature (min.): 16 °C, electrical fuse: 16 A, input current: 2 A, input frequency: 50 Hz, ambient temperature (max.): 35 °C, total length: 2,500 mm, total width: 754 mm, overall weight: 400 kg, energy consumption: 12 kWh, Equipment: freezer, lighting, Fun Ice SRL is AHT representative in Romania since more than 25 years AHT reseller of new and used equipments Quick delivery, worldwide AHT Kinley 210/250 cm (can be used as a freezer or refrigerator, medium and low temperature) !!! Fully tested and complete system (base + 2 rows of shelves) Refrigerant ECO R290 Ready to plug-in, easy installation LED internal light (canopy LED and doors LED lighting) Random units on stock - AHT Kinley / Epta or Carrier top freezers at 210 cm and 250 cm lenght Can be combined with AHT Miami or Athen XL LED cabinets (on stock in Oradea, Romania) All reconditioned AHT EQ series equipments are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) Lhedperhwuaofx Akqon Any accessories and spare parts on stock

Condition: excellent (used), Year of construction: 1982, ULMIA 1710s table saw Year of manufacture: 1982 Tilt angle: 45° Cutting length on the carriage: 750 mm Maximum blade diameter: 250 mm Cutting height: 75 mm Cutting width between the saw blade and the fence: 650 mm Carriage with a scale for angle cutting Table size: 1000x630 mm Lhedpfx Akjz Sb Evjqjn

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Frommia Type: 710 Machine Type: Spindle Moulder Work Table Table Dimensions: 340 × 250 mm Table Slots: 3 Spindle Speed: 150–2,500 rpm MACHINE DETAILS Dimensions Length: 6,800 mm Width: 550 mm Height: 1,600 mm Weight: 400 kg Lhodj Ad Infjpfx Akqon

Condition: excellent (used), Year of construction: 1987, Circular saw Manufacturer: Ulmia Type: 1712 Year of manufacture: 1987 Table: 800 x 710 mm Saw blade diameter: 350 mm Cutting height: 125 mm Power: 3 kW Lsdpfx Aksztnx Esqohn Bevel angle: 45° Motor brake: Yes Weight: approx. 500 kg

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Aluminum floor, tiltable Features: - 2-3 motorcycles - LED lighting - Tiltable loading platform Net: €1,067.23 / Gross: €1,270.00 Article number: MGP375231500.02 Technical data: • Brand: Martz • Model: GP 3 PREMIUM • Vehicle type: Motorcycle trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 3 years from first registration • Internal dimensions (L x W x H): 230 x 155 x 0 cm • External dimensions (L x W x H): 312 x 192 x 86 cm • Permissible total weight: 750 kg • Unladen weight: 193 kg • Payload: 557 kg • Chassis: Low loader (wheels beside the body) • Tires: 155/70R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100km/h approval: Yes DESCRIPTION • Stable frame construction • Trailer can be stored upright • Closed floor made of aluminum tread plate • Suitable for transporting 1 to 3 motorcycles • 1 ramp, steel, galvanized. - in ramp compartment • Foldable, galvanized V-drawbar • Plastic mudguards • 12 lashing points distributed on the loading platform • Maintenance-free rubber spring axle from KNOTT • 100km/h manufacturer's certificate Lodpfx Akezy Afyoqshn • 13-pin connector • Large-sized LED safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel mounted _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been an authorized dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Aluminum floor, tippable Features: - 1-2 motorcycle trailer - LED lighting - Tipping cargo area Ledpfozy Drhox Akqehn Net: €966.39 / Gross: €1,150.00 Item number: MGP275231500.02 Technical data: • Brand: Martz • Model: GP 2 PREMIUM • Vehicle type: Motorcycle trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU: 3 years from first registration • Internal dimensions (L x W x H): 230 x 155 x 0 cm • External dimensions (L x W x H): 312 x 192 x 86 cm • Permissible total weight: 750 kg • Unladen weight: 155 kg • Payload: 595 kg • Chassis: Low-loader (wheels next to the body) • Tires: 155/70R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Sturdy frame construction • Trailer can be stored upright • Closed floor made of aluminum tread plate • Suitable for transporting 1 to 2 motorcycles • 1 galvanized steel loading ramp - in ramp compartment • Foldable, galvanized V-drawbar • Plastic mudguards • 10 lashing eyes distributed on the cargo area • Maintenance-free rubber spring axle from KNOTT • 100 km/h manufacturer's certificate • 13-pin connector • Large-sized LED safety lighting • Integrated rear fog lamp • Lighting recessed in the rear frame • Support wheel installed _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates including customs declaration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - official dealers & repair - workshops for over 30 years. - Errors, omissions and prior sales excepted -

Condition: new, Year of construction: 2026, machine/vehicle number: A1481630, Complete finishing line Lhedpfxebqh R Tj Akqsn max. product dim. lenth = 2000mm, width = 750mm, hight = 1000mm max. weight 50kg (higher weight possible) speed up tp max. 1m/min. (higher speed possible) Please contact us for more information.

Condition: ready for operation (used), functionality: fully functional, warranty duration: 6 months, Price availble for below configuration : Top Freezer AHT Kinley or Epta 250 combined with not-refurbished horizontal cabinet AHT Miami, but tested and complete grid system inside (shelves and dividers), glass lid seals changed Fun Ice SRL is AHT representative in Romania since more than 25 years AHT reseller of new and used equipments Quick delivery, worldwide AHT Kinley 210/250 cm (can be used as a freezer or refrigerator, medium and low temperature) !!! Fully tested and complete system (base + 2 rows of shelves) Refrigerant ECO R290 Ready to plug-in, easy installation Ledpsrhwuwsfx Akqshn LED internal light (canopy LED and doors LED lighting) Random units on stock - AHT Kinley / Epta or Carrier top freezers at 210 cm and 250 cm lenght Can be combined with AHT Miami or Athen XL LED cabinets (on stock in Oradea, Romania) All reconditioned AHT EQ series equipments are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) Any accessories and spare parts on stock

Year of construction: 2011, condition: excellent (used), FEMIA bean calibrator, unused Lhjdpfx Aowykpcskqen