Used Michael Relay for sale (635)

Condition: ready for operation (used), Rex Long-hole drilling machine 1. Manual operation of the cross slide worktable via hand lever Drill head fixed Heavy-duty design Nodpfx Ako Adnnrjqjdc

Condition: excellent (used), Safety relay for Kardex Megalift FSE vertical storage lifts. This product is no longer manufactured and is not available for purchase as new. Used, but in good working condition. Contact us to check compatibility with your vertical storage system. Delivery time: 1-3 days. Nedpez N D S Eefx Akqodc

Condition: like new (used), Coil: 24V AC/DC 3.0VA 1.5W 50-60Hz 1) ID No.: 774059826328 Njdpfeyt E Dmox Akqodc 2) ID No.: 774059825212 Area of application: Safety circuit Width: 22 mm Height: 87 mm Depth: 120 mm Weight: 214 g

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines Nsdpeyxhq Usfx Akqedc - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 0.14 kW (0.19 HP), input voltage: 230 V, type of input current: AC, volume flow: 1,890 m³/h, filter area: 7.9 m², noise level: 65 dB, actuation type: electric, total height: 575 mm, total length: 600 mm, total width: 590 mm, overall weight: 55 kg, Equipment: CE marking, documentation/manual, LTA electrostatic dust extraction system Intake on the right The intake nozzle can be screwed on as needed; currently, there is none, as it was previously mounted directly on the housing wall. In very good, fully functional condition, and naturally completely cleaned. Ndjdpfozqttcex Akqjc Available for immediate delivery.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: VKE / FLPS2 – 4APC/S, type of input current: three-phase, Automatic Vertical Strapping Machine VKE / FLPS2 – 4APC/S Current Status & Availability: The strapping system is fully operational and is currently still in daily use. Availability: The entire system is currently fully integrated into the production process and can be inspected under operating conditions after prior arrangement. The planned dismantling/replacement must be carried out by the buyer during calendar week 46-47 / 2026. Technical Data: Pallet Types: Pallet width 500 to 1000 mm Ndodpfx Akoy Szfljqec Pallet length 600 to 1200 mm Package height (incl. pallet) min. 500 - max. 2000 mm Conveyor height 500 mm Weight (incl. pallet) 150 to 1000 kg Package stacking method: automatic Under-stretching: no Conveyor speed: 12 m / min Pallet transport direction: lengthwise onto lengthwise boards Centering accuracy: centered on the stop light barrier Machine Components: Pneumatics: Festo Gear motors: SEW Control system: PLC S7-200 Control cabinet: Rittal Protection class: IP 55 Main switch: Möller Fuses: Siemens Relays: Omron Push buttons: Siemens Signal lights: Telemecanique Light sensors / light barriers: Datalogic Inductive proximity sensors: Omron / Siemens Cam switches: Siemens Contactors: Telemecanique

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: P02/194, Equipment: CE marking, The machine was completely refurbished between 2020 and 2021, including overhauling the spindle, electrical panel, installing a second filter, touchscreen, PLC, temperature control (solid-state relay), internet access, repainting, etc. The machine is currently in production. Njdpfxjz I Tghj Akqsdc

Condition: used, Quantity: 2 units available Functionally tested; item originates from the dismantling of equipment belonging to an automotive supplier. Ndedezmm Ixopfx Akqoc Manufacturer: SPS electronic Type: RL42-L Function: High-voltage relay for insulation and dielectric strength testing Switching voltage: up to 5 kV DC Switching current: up to 10 mA Coil voltage: 24 V DC Application: High-voltage test equipment, safety circuits

Condition: used, functionality: fully functional, machine/vehicle number: 160135F-01L, For sale: National Instruments PXI-2569 100-Channel SPST Relay Module, in fully functional condition. Manufacturer: National Instruments (NI) Model: PXI-2569 Condition: Used – Fully Tested and Functional Tested with: NI MAX – operational functionality verified Channels: 100-channel SPST relay Ndodszh Ipgjpfx Akqsc Max. switching voltage: 100 V DC Max. switching current: 1 A/channel Max. switching power: 60 W/channel Scanning list: 32,000-step deterministic scanning Interface: PXI Tested with NI MAX software, confirming the functionality of all 100 relay channels. Fully software-programmable with NI-SWITCH driver, compatible with LabVIEW and LabWindows/CVI. Ideal for automated test systems and medium-power switching applications. Removed from a working industrial environment, no faults found. Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection. If the phone number is unavailable, please use our email address to contact us.

Condition: excellent (used), Year of construction: 2018, The EKOMEX RBM 500 is a frozen block shredder designed for the mechanical breakdown of deep-frozen meat and hard, fibrous products in meat processing facilities. Manufactured in 2018, the machine features a 19 kW electric motor, a net weight of 1,600 kg, and a comprehensive safety interlock system. The shredded raw material is discharged directly into a meat trolley, making it ready for transfer to downstream equipment such as a grinder, bowl cutter, or mixer. How does the EKOMEX RBM 500 frozen block shredder work? Nsdpfsz S H Ubox Akqsdc The machine enables the shredding of deep-frozen meat blocks without prior thawing or manual cutting, thereby reducing preparation time and labor requirements. Its robust, stable construction (weighing 1,600 kg) is engineered for reliable heavy-duty operation, while direct discharge into a meat trolley streamlines production line logistics. Manufacturer: EKOMEX Machine type: Frozen block crusher Model: RBM 500 Machine number: 10015120003 Year of manufacture: 2018 CE number: 2018/RBM50003 Power supply: 400 V, 50 Hz, 3-phase Power: 19 kW Net weight: 1600 kg Noise level: approx. 80 dB Drive: geared motor driving the crushing shaft Working tool: crushing shaft with a set of 6 blades Feeding method: gravity feed via hopper, or via transfer/conveyor belt Product discharge: directly into a meat trolley Intended use: deep-frozen meat and hard, fibrous products Controls: panel with START, STOP, and RESET buttons; READY / NOT READY and ALARM (safety protection) indicator lights; EMERGENCY STOP Safety features: safety module, limit switch for removable guards, switch sensor, hopper safety grid, motor limit switch, main switch Electrical system: Schneider Electric and Allen-Bradley components, starting system with time relay Materials: stainless steel and food-grade plastics Directives: 2006/42/EC (Machinery), 2014/35/EU (Low Voltage) Documentation: operating manual, electrical schematics, drawings, and parts list replacement parts, CE declaration of conformity

Condition: good (used), 9 pieces, each with a circuit board Removed from an Arburg 420 C Selogica Ndodpfx Akezdktgsqsc 100 EUR per piece 600 EUR for the entire set

Condition: like new (used), Year of construction: 2024, functionality: fully functional, cutting length (max.): 3,600 mm, overall weight: 14,000 kg, Veneer stack cutting machine / Veneer shears with 4 knives Manufacturer: Monguzzi (Fisher+Rückle) Type: AFV-42-3600 Year of manufacture: 2024 Hydraulic veneer shears with 4 knives for trimming and edging veneer stacks Typical applications: Veneer mill, veneer trade, veneer cutting, furniture and interior design with solid wood veneer Cutting range: Cutting length approx. 3600 mm 4 knives (2 upper and 2 lower knives), individually selectable Hydraulic pressure beam with 2 cylinders Hydraulic pressure switchable 45 bar / 90 bar Axes and drives: Positioning axes X and X2 (left / right) with stepper motor control Axis Y with frequency inverter 1.5 kW and brake Register adjustment with frequency inverter 0.75 kW and brake Register adjustment also via foot pedal Conveyor belt Njdpfx Asz I Tipjkqodc Line laser Hydraulics: Hydraulic unit with tank capacity 300 l Proportional valve Filter monitoring (contamination indicator) Control: PLC control with touch panel (esaware) Manual operation, automatic cutting, parameters, diagnostics, alarm history, programming Control panel with push buttons and emergency stop Safety: Emergency stop safety relay Pilz PNOZ X3 Light curtain with safety module Datalogic SE-SR2 Two-hand operation Electrical connection: 400 V, 50 Hz, 3P + PE Current consumption approx. 22 A Fuse 25 A Control voltage 24 V DC Basic concept: - Veneer stack cutting machine with 4 hydraulically operated knives - Pressure beam for fixing the veneer stack during cutting - NC positioning via the X, X2 and Y axes - Waste flaps for scrap - CE declaration of conformity according to Machinery Directive 2006/42/EC available, as well as documentation and circuit diagrams available Weight approx. 14,000 kg

Condition: ready for operation (used), Year of construction: 2020, operating hours: 300 h, overall weight: 24 kg, load capacity: 10 kg, arm reach: 850 mm, number of axes: 7, Collaborative robot manufactured in 2020. This KASSOW ROBOTS KR810 features a reach of 850 mm and a payload capacity of 10 kg. It is designed with a lightweight body made of anodized aluminum and offers a maximum speed of 1200 mm/s. If you are looking to get high-quality automation capabilities, consider the KASSOW ROBOTS KR810 collaborative robot we have for sale. Contact us for further details regarding this machine. Nsdoz Hdbgjpfx Akqjdc  - Joint Speed: 225 deg/sec- Joint Ranges: J2 and J4: -70°/+180°; J1, J3, J5, J6 and J7: ±360°- Degrees of Freedom: 7- Repeatability: +/- 0.1 mm- Footprint: 130 x 130 mm- Operating Temperature: 0 - 45 °C- Body Material: Anodized aluminum- Protection Rating: IP54- Controller: KR Controller KR810/KR1205- Digital Outputs 24V: 8 pcs- Relay Outputs: 4 pcs- Digital Inputs 3-30V: 16 pcs- Analogue I/O (0-10V): 2 / 2- Analogue I/O (4-20mA): 2 / 2- Power Consumption (with max load): 400 - 600 W- Supply Voltage: 100-120 VAC or 200-240 VAC- Supply Current: 16 A- Supply Frequency: 50 / 60 Hz- Max Speed: 1200 / 1800 mm/s- Sound Level: Below 70 dB- Absolute Encoders on Joints: Yes- Brakes on Joints: Yes- Working Hours: < 300 hours (Test and evaluation use only in lab environment)- Optional Accessories / End Effector Included: Schunk Arm CO-ACT EGP-C 64 gripper- Included Equipment: Robot arm, original Kassow controller, Kassow Teach Pendant (tablet) with cable, power and communication cables, mounting interface / base plate, original documentation/manuals

Condition: new, Michael Riedel DROP 50 NA transformer, unused, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Ndodpsx Et I Ssfx Akqjc

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, power: 2.2 kW (2.99 HP), input current: 5 A, Equipment: type plate available, TEKA welding fume extraction system 3 units with control units, pipes, and mounting hardware The system is new, has never been used, and is partially still in its original packaging! Nsdpfx Aez Sp Ahekqedc

Condition: excellent (used), Year of construction: 2021, Now there is a rare opportunity to invest in a used AutoStore system delivered by Swisslog. The system was installed in 2021 and is available for immediate sale. The system is located in the USA and offers a quick path to upgrading your automation without the long lead times and high investment costs associated with a new installation. This AutoStore is equipped with a total of 22 Red-line robots, resulting in a very high robot density. This creates incredibly high output with high capacity. Don't miss out! 23 robots – high throughput from the start Ready for sale now – avoid long delivery times Cost-effective investment – fast ROI The availability of used AutoStore systems is very limited, making this a unique opportunity for companies that want to scale up quickly. The system is ready to be dismantled, moved, and put into operation in a new facility immediately. Model year: 2021 Machine length: 16,300 mm Machine width: 15,250 mm Machine height: 4,880 mm Grid type: Double-double Number of robots: 23 Number of ports: 8 Port type: 2 Relay Ports + 6 Conveyor Ports Number of bins: 4100 Bin height: 330 mm Bin width: 400 mm Nedpfx Akezbhcheqodc Bin depth: 600 mm

Condition: used, mileage: 39,695 km, power: 270 kW (367.10 HP), color: white, gearing type: automatic, Equipment: ABS, airbag, central locking, power assisted steering, seat heater, - Passenger airbag - Electronic window control - left - Electronic window control - right - Driver airbag - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. J. Ebert will be happy to assist you. Highlights & Packages 23P – Driving Package P17 – KEYLESS-GO Package P29 – AMG Sport Package Interior P31 – AMG Line Exterior / AMG Sport Package Exterior P47 – Parking Package High P49 – Mirror Package P55 – Night Package 215 – Adaptive Damping System Plus (ADS+) 489 – AIRMATIC DC / Semiactive Air Suspension 413 – Panoramic Sliding Roof / Glass Roof 901 – Interior Chrome Package Assistance Systems 233 – Distance Control Assist Plus (DISTRONIC PLUS) 235 – Active Parking Assist 266 – DISTRONIC PLUS with Crosswind Assist (DTR+Q) 273 – Exit Warning Function 501 – All-Round View System / 360° Camera (Surround View) 513 – Traffic Sign Recognition 546 – Automatic Speed Control 8B6 – Parking Assist with Lateral Parking Function (UN R79) K33 – Extended Restart in Stop-and-Go Traffic K34 – Route-Based Speed Adaptation 8U6 – Adjustment of Steering Wheel Controls for Assistance Systems Exterior 799U – Diamond White Metallic Paint 260 – Deletion of Type Designation on Rear Lid 500 – Electrically Folding Exterior Mirrors, Left and Right 550 – Trailer Coupling 557 – Increased Trailer Load / Trailer Preparation 772 – AMG Styling – Front Spoiler and Side Skirts 7B2 – Wheel Arch Extension (Cladding) Size L 840 – Dark Tinted Glass 871 – Sensor System for Rear Lid Opening/-Closing 889 – KEYLESS-GO 890 – Automatic Rear Door / Tailgate E80 – Chrome-Plated Loading Edge Protection 9U7 – Aerodynamics Package Interior 600A – Fabric / Leather / Microfiber 601A – Fabric / Leather / Microfiber – Black / Anthracite 2B8 – Seat-SEDRIC on Relay for Driver Seat, Electrically Adjustable 51U – Roof Liner Fabric Black 541 – Double Roller Blind for Luggage Compartment Cover 580 – Air Conditioning 873 – Heated Driver and Front Passenger Seat H46 – Trim Elements, Aluminum Shine, Bluish Hue L5C – Supersport Steering Wheel – Leather, Deep-Embossed U22 – Lumbar Support Adjustment U26 – Floor Mats AMG Ndedpszwlpvjfx Akqec U10 – Front Passenger Seat with Weight Recognition Multimedia 01U – MB-Connect Services for Navigation 14U – Smartphone Integration Package 16U – Smartphone Integration Apple CarPlay 17U – Smartphone Integration Android Auto 33U – MBConnect – Extended Connectivity 351 – eCall Emergency Call System (HERMES) 362 – HERMES Communication Module LTE 365 – Hard Disk Navigation 367 – Live Traffic – Capability (HERMES) 537 – Digital Radio Standard DAB 72B – Additional USB Ports 868 – Central Display Size L Lights & Visibility 249 – Automatically Dimming Interior and Exterior Mirrors 587 – Logo Projection via Exterior Mirrors... Metallic paint, Sliding roof, Alloy wheels, Electronic immobilizer, ESP, Navigation system, Service booklet available, Warranty, Rain sensor, Panoramic sunroof, Sports seats, Electric side mirrors, Sport package, Bluetooth, On-board computer, Electric seat adjustment, Hands-free system, Multifunction steering wheel,...

Condition: used, mileage: 110,000 km, power: 120 kW (163.15 HP), first registration: 08/2019, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,980 mm, loading space length: 4,250 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: - 2nd battery (auxiliary battery) in engine compartment - Overhead storage in cab headliner - Passenger airbags - Aluminum trim at sliding door step - Tow bar: ball head, for increased trailer load - 3.5 t - 13-pin trailer socket - Electric roof ventilator II (cargo/passenger compartment) - Cargo area ceiling light with door contact - Entry handle on rear left D-pillar - Entry handle on rear right D-pillar - Tachograph controls front under roof headliner - Chassis: Stabilization level II - Transmission lock for PTO - Grab handles on A-pillars - Additional main key - Rear door (opening angle 270 degrees) - Wooden floor in cargo area - Terminal strip for electrical connections (driver's seat base) - LED cargo area light - Cable duct at rear portal - Cable duct at side wall - Multimedia system MBUX (7" touchscreen) - PTO 2 B with layshaft - Parameterizable special module - Crossmember with integrated step - Smoker package - Spare wheel with same specification as driving tires - Spare wheel carrier under rear chassis incl. jack - Amber warning beacons (2) - Reversing camera - Acoustic reverse warning (external warning signal) - Wipers with rain sensor - Off-road chassis - Seat belt warning system with alert (passenger side) - Cabin seats: passenger double seat - Cabin seats: comfort driver's seat - Engine start/stop system - 12V socket in driver's cab - Additional separating relay with extra battery - USB port middle under dashboard (charging only) - AGM battery 92 Ah - Jack - Additional rear indicator lights (roof) Further equipment: - 2 extra main keys - Overhead parcel shelf - Aluminum protective strip, floor covering, entry - Trailer hitch for increased towing capacity 3.5 t incl. 13-pin socket - Fixing rails for roof rack - Passenger airbag - Passenger double seat - Warning film application Ndedpfx Akey Nf T Usqsc - Hill start assist - Flat indicator lamps, extra rear on roof - Electric roof ventilator II - Load space ceiling light with door contact - Constant speed control - Eco start-stop function - Entry grip on rear left corner pillar - Transmission lock for PTO - Passenger seat belt warning device - Entry grab handles for driver and passenger - Wooden floor - Terminal strip for electrical connection - Controlled air conditioning TEMPMATIK - Comfort roof control unit - Comfort driver's seat - LED light strip in load compartment - M. Becker MobiE generator offer 18022287 - M+S tires - MBUX multimedia system with 7-inch touchscreen - PTO layshaft - Parameterizable special module - Crossmember with integrated step - Smoker package - Rain sensor - Spare wheel - Spare wheel holder under end of frame - Reversing camera - Reverse warning device - Double-wing rear door, opening up to side wall - Amber warning lights front left/rear right - Rough road version - Sortimo racking system - Stabilization level II - Socket in cab - Tank sender for auxiliary heater - Additional separating relay at battery - USB socket 5V - Additional features: Interchangeable ball/pin towing coupling - Additional features: Switchable additional hot air heating - Auxiliary battery for retrofit consumers, engine compartment 3rd brake light, storage compartment above windscreen, storage compartment below dashboard passenger side, adaptive brake light, driver's airbag, hill start assist, traction control (ASR), washer fluid level display, exterior mirrors electrically adjustable and heated, both sides, outside temperature display, cab roof lining, ...

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 09/2026, fuel type: diesel, color: red, gearing type: automatic, emission class: euro6, number of seats: 8, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Exhaust system, EU6e (EC) * Front-wheel drive * 8-speed automatic transmission * 4-cylinder turbocharged diesel engine, 2.0 l / 130 kW (4V) * Start-stop system with brake energy regeneration * One towing eye at the front * Trailer hitch, fixed * Standard wheelbase 3,640 mm * Mud flaps at the front and rear * Fuel tank 75 l * Reinforced suspension/damping and reinforced stabilization * Approved as a 3.5t vehicle * Reinforced front axle * Permissible total weight 3,500 kg * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * Tires 235/65 R16C 115/113 R, low rolling resistance tires, tire brand not specified * All-season tires * Battery 520 A (92 Ah) * Immobilizer, electronic * Electrical terminal block and CAN gateway with ABH programming * 'Climatic' air conditioning in the driver's cab * 2nd battery (AGM battery) with separation relay and battery monitoring * 2nd heat exchanger and 2nd evaporator * Daytime running lights with assist lights * LED main headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo compartment * Fog lights incl. cornering lights * Side marker lights * Heated windshield washer nozzles at the front, without windshield washer fluid level indicator, without headlight cleaning system * Step lighting * Exterior mirrors, electrically adjustable and heated * Convex exterior mirrors on the left and right, with integrated LED turn signal and wide-angle view * Normal roof * Rear step, covering half the width * Grab handles on the rear pillars * Rear wing doors with window cutouts * Rear window, heated, with rear window wiper/washer system * Radiator protection grille, black with chrome strip * Rear wing doors with increased opening angle * Windshield wiper interval control with light and rain sensor * Sliding door, right * Side window in the passenger/cargo compartment, front left, fixed * Side window in the passenger/cargo compartment, front right, fixed Ndodpfx Akozc Dg Eeqsc * Laminated front windshield with heat-insulating glazing, heated * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, one 1-DIN slot and reading light (only with 2nd evaporator) * Sun visors, foldable and pivotable to the side * Electronic parking brake * Premium interior noise damping * Glove compartment with lockable flap, illuminated * Safety interior mirror, dimmable * Leather multi-function steering wheel, heated with Tiptronic * 12-V socket and 2 cup holders in the instrument panel * Three-point automatic safety belts with belt height adjustment and electric belt tensioners at the front * Seatbelt warning system, E-contact in the seatbelt buckle * 2 radio remote controls * Keyless Go * Water auxiliary heater, with remote control * Chrome package * Suspension seat 'ergoActive' left * Seat 'Comfort' right * Seat covers in synthetic leather 'Mesh' * Seat heating for driver and front passenger seat, separately adjustable * Digital instrument cluster * Manual regeneration of the diesel particulate filter * Tire pressure monitoring system * USB Type-C data and charging port(s) with increased charging power * 4 speakers: 2 tweeters, 2 woofers * MAN Media Van * Digital radio reception (DAB+) * MAN SmartLink * MAN Connect (call services), with OCU3 low * Comfort telephony * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assistance system front and rear * Cruise con

Year of construction: 2009, condition: used, General information Year of manufacture: 2009 Field of application: Freight transport Drivetrain Make of engine: Honda Functional Lifting capacity: 2 kg History Number of owners: 1 Condition Nedpfx Aez Ehv Eokqsdc General condition: good Technical condition: good Visual appearance: good Other information Latest inspection: 2026-04-24 Production country: DE Additional information Please contact Michael Overmeer for more information Paus 25 WH Easy Big lift construction year 2009 from the first owner (rarely used and always stored inside) Lift is in a nice condition and has among other things: powered by a Honda petrol engine, last technical inspection and maintenance 04-2026. Changes and writing and typing errors reserved.

Condition: used, Year of construction: 2012, Mazak VTC-820/30 – specification Overview - Brand: Mazak - Model: VTC-820/30 - Year model: 2012 - Location: Eskilstuna Control system - Mazatrol Matrix Nexus Movements - Number of axis: 4 (X, Y, Z + 4th shaft) - X-axis: 3.000 mm - Y-axis: 820 mm Ndsdpfx Akoz N An Ejqoc - Z-axis: 720 mm - Fast transport: 50 m/min - Distance spindle nose to table: 140–860 mm Spindle and tool - Spindle effect: 22 kW - Spindle RPM: 12,000 rpm - Spindelkona: CAT 40 - Tool changer: 30 positions - Cutting fluid through the spindle: 15 bar Table - Table size: 3,500 × 820 mm - Max table load: 2,500 kg - T-slots: 7 pcs, 18 mm, pitch 100 mm 4th axle - Round Feeding Table Mazak DS50C-R1-Z, Ø 500 mm, with Roller Gear Cam - Vertical mounting on angle shelf Mazak MAZ 80090X Dimensions and weight - Machine depth: 3,700 mm - Machine height: 3,050 mm - Machine weight: 16,100 kg Equipment - Renishaw tool breakage control TRS2 - Shavings conveyor to the left, lamella conveyor with timer relay - Cutting fluid through the spindle, 15 bar - Manual rinsing nozzle - Portable pulse generator (handheld) for shoulder movements - Automatic power shutdown at end of program - 3 extra M-functions (1 pair) - Robot interface, Ethernet/IP slave - Automatic doors

Condition: used, mileage: 50,190 km, power: 18 kW (24.47 HP), first registration: 07/1951, fuel type: diesel, empty load weight: 1,630 kg, maximum load weight: 1,520 kg, overall weight: 3,150 kg, axle configuration: 4x4, color: green, driver cabin: day cab, gearing type: mechanical, number of seats: 2, Year of construction: 1951, Equipment: all wheel drive, cabin, Vehicle location: Bovenden, auxiliary drive Unimog 2010 / 401/51 Böhringer? Year of manufacture 1951? Extensively restored For sale is an exceptional Unimog 2010 / 401/51 Böhringer from 1951 – a genuine piece of German automotive and agricultural history. This historic Unimog impresses with its authentic character, excellent condition, and an extensive, professionally executed restoration. A special collector's item for lovers of classic Unimog models and historic commercial vehicles. Vehicle details - Manufacturer: Unimog / Böhringer - Model: 2010 / 401/51 - Year of manufacture: 1951 - Exterior color: Green - Interior: Black leather seats - Equipment: Auxiliary drive for PTO operation at the front and rear - Origin: Swiss import - Customs status: Already cleared for import into the EU Dimensions and weight - Width: 1.60 m - Length: 3.20 m - Height: 2.00 m - Platform height: 1.08 m - Sideboard height: 1.45 m - Vehicle weight: approx. 1.86 tons Extensive restoration - investment approx. €40,000 In 2001, the Unimog was professionally restored with great effort and special care. The work was carried out by the specialist workshop Franz & Michael Schuth - Restoration and Repair, Agricultural Machinery Master Workshop. Ndodpfx Akjzyvdpjqsc The restoration costs amounted to around €40,000. The quality of the restoration was confirmed by an appraisal from 2002 with the exceptional condition rating of 1+. Extensive documentation Numerous historical and technical documents are included with the vehicle: - Swiss vehicle registration document - Proof of import and EU customs clearance - Appraisal from 2002 with condition rating 1+ - Classic car appraisal according to § 21 StVZO (TÜV) - Unimog specialist book - Original operating manual, version C This documentation complements the historical value of the vehicle and makes the Unimog particularly interesting for collectors and classic car enthusiasts. Optional: Matching historic long timber trailer A historic long timber trailer is available to match the Unimog, which can be purchased for an additional charge of €5,000. - Trailer: Long timber trailer - Stated weight: 1,600 kg - Total weight of Unimog and trailer: approx. 3.46 tons This combination offers a particularly attractive option for classic car meetings, historical demonstrations, collections or exhibitions. Information provided to the best of our knowledge. Errors and prior sale excepted. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Ndjdpfx Akey N D E Asqoc Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: used, mileage: 211,894 km, power: 95 kW (129.16 HP), first registration: 08/2014, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: automatic, emission class: euro5, number of seats: 3, loading space length: 3,302 mm, loading space width: 1,795 mm, loading space height: 2,012 mm, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Buy online. Finance digitally. Get it delivered nationwide. Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: 3636 Your advantages with us: Digital consultation by phone or WhatsApp * Financing options even without a down payment * Trade-in of your vehicle - whether old or new Optionally bookable: 12-60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & AU (German vehicle inspection) * Nationwide delivery * Rear view camera can be retrofitted on request Vehicle highlights: * Complete workshop equipment - ready for immediate use * Workbench with vice, drawer cabinets & shelves * Compressed air compressor in the cargo area * Automatic transmission * High roof - headroom approx. 2.01 m in the cargo area * 2.1 L CDI with 95 kW (129 hp) * Air conditioning & cruise control * Parking assist Parktronic * Auxiliary battery with separation relay * Trailer hitch optional - 2,000 kg towing capacity * Euro 5 - green emissions sticker * 3 seats Cargo area (approx. internal dimensions): Length 3,302 mm x Width 1,795 mm x Height 2,012 mm Equipment overview: Ndjdpfez Nu N Ijx Akqsc Cargo area & workshop conversion Workbench with wooden work surface & vice * Several drawer cabinets * Shelf systems on both sides * Compressed air compressor * Wood paneling & perforated board partition * Solid cargo area partition * Tie-down points * Sliding door on the right * Rear doors 180° Comfort Automatic transmission * Air conditioning * Cruise control * Radio with CD (Audio 10) * Electric windows * Electrically adjustable & heated exterior mirrors * Central locking * Comfort suspension seat driver with armrest * Double passenger seat * Outside temperature display Safety ABS, ASR & ESP * Hill start assist * Parking assist Parktronic * Adaptive brake light * Driver airbag * Immobilizer Technology 2.1 L CDI diesel - 95 kW (129 hp) * Automatic transmission * Rear-wheel drive * BlueEfficiency with start/stop * Auxiliary battery with separation relay * Euro 5, green emissions sticker * Permissible total weight 3,500 kg * Trailer hitch optional, towing capacity 2,000 kg braked / 750 kg unbraked * Paintwork: Brilliant silver metallic * First registration 08/2014 Do you want to lease or finance? We offer attractive offers - also possible without a down payment! Please feel free to contact us. Contact: Phone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The photos are AI-edited and serve only as an example to illustrate the size & equipment of the vehicle. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Condition: good (used), operating hours: 1,329 h, fuel type: diesel, motor manufacturer: Yanmar, General information Year of manufacture: 1998 Field of application: Construction Drivetrain Drive: Wheel Weights Empty weight: 3.380 kg Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Drill equipment: Tank, Control Panel, Steel canopy Production country: NL Additional information Please contact Michael Overmeer for more information Nedsygwfispfx Akqodc = Additional options and accessories = - Control Panel - Steel canopy - Tank = Remarks = Atlas-Copco with 1.329 operating hours mounted on a trailer year of construction december 1998 with a hydraulically operated light tower (9 meters), hydraulic support legs and a hydraulic nose wheel. Changes and typographical errors reserved.