Used Microscope for sale (99)

Condition: used, functionality: fully functional, Leica Leitz DMRB 301-371.010 Microscope. Iedjuax E Ujpfx Ad Dsbd The Leica Leitz DM RB microscope provides enhanced object identification by using fluorescence illumination. It also allows bright and darkfield illuminatio techniques, phase contrasts, and condenser height adjustment. Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, OlympusIX70-S8F Inverted Fluorescence Phase Contrast Microscope. Iedpfxeuax T Ss Ad Dsbd This Olympus IX70 microscope is capable of phase contrast, DIC, and fluorescence. It comes with an ergonomic tilting binocular head with 10x eyepieces. The microscope has a front and side photo port for adding a camera. The 0.5 N.A. condenser has DP10 and DP20 DIC prisms and Ph1, PhC phase annuli installed with the IX-LWPO polarizer. The 5 position fluorescence turret contains WIBA, and NU fluorescence filters. Also included is the IX-AN analyzer and U-DICT DIC prism. The microscope has a built in 1.0x / 1.5x mag changer. Good working condition. Please check out our other listings as well.

Condition: defective spare-parts repository (used), Vickers Type: HVS 1000 The HVS 1000 digital micro Vickers hardness tester has a unique and unique and precise design in the areas of mechanics, optics and light light source and is able to produce a clearer image of the indentation and therefore a more precise measurement. The main purpose and scope of application: 1.Iron and steel, non-ferrous metals, metal foils, hard alloys, metal sheets, microstructures 2. carburizing, nitriding and decarburizing layers, surface hardening layers, plating, coatings 3. glass, wafers, ceramic materials Ibedsrr Sqpepfx Ad Dod Specifications: Model HVS1000 Type Digital micro hardness tester Test forces (N) 0.098 / 0.246 / 0.49 / 0.98 / 1.96 / 2.94 / 4.90 / 9.80 Test forces (Kgf) 10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000 Load control Automatic loading and release Lens indenter tower Manual Holding time (s) 0~60 Magnification of microscope x 400x for measurement, objective 40x, eyepiece 10x 100x for observation, objective 10x, eyepiece 10x Micrometer resolution (μm) 0.01 Test range 5 HV~3000 HV Dimension of the XY test table 100X100 mm Movement range of the XY test table 25X25 mm Max. Height of the sample 120mm Max. Width of the sample 110mm Hardness conversion HK, HRA, HRB, HRC, HRD, HR15N, HR30N, HR45N, R15T, HR30T, HR45T, HV, HBW Output Built-in printer, RS232 interface Power 220V, 60/50Hz Dimension (mm) 441 x 270 x 480 Net weight (kg) 35 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 1992, Universal tool grinder Michael Deckel S11 very good condition !!! Technical data: >> Year of manufacture 1992 >> serial no. 1651 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. tool diameter between centers 130mm >> Max. Max. tool diameter with flying clamping in universal dividing head 620mm >> Max. Tool length between centers 270mm >> T-slots machine stand 12mm >> T-slots grinding head, tool slide and accessories 8mm Range of motion: >> Working paths grinding stroke 190mm grinding stroke during swirl grinding 190mm cross adjustment tool slide 100mm vertical adjustment grinding head 325mm longitudinal adjustment grinding spindle 5mm >> Coarse adjustment travel tool carrier 220mm Grinding head carrier 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool carrier 360 degrees grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speed, stepless 2000 to 10000 rpm Max. Grinding wheel diameter 125mm Max. Cutting disc diameter 200mm Djduu2 Dimensions: Weight 520 Kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2,5 x 2,3 m Accessories and equipment: Ibodpfx Adjm E T Anj Ded >> Opto-electronic measuring device with microscope and digital display >> Radius grinding device SK40 >> Handwheel device for tool slide >> Suction device >> Machine lamp To the machine : Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches are ground amazingly fast, economical and flexible and with the highest ease of use. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Condition: like new (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, DEVICE TYPE digi test II BASIC EQUIPMENT Stand: Test Stand BS 09 with dust cover Arm: Specimen holder arm digi test II with load unit E-Box: Electronics unit digi test II - USB / RS232 interface - mini USB cable - 100-240 V, 50/60 Hz Cables: Power cord, black 10/16A, 250 V 90°, 2.0m Power plug, cold device socket black 3x0.75 Schuko plug 90° to straight cold device socket Ibedpfx Adsxw R Svs Djd Precision for the finest details An IRHD hardness tester is the ideal solution for precise hardness testing of the smallest samples or thin layers. These specialized devices are indispensable in industries such as materials science, electronics, medical technology, or research and development, where even the smallest details play a crucial role. With an IRHD hardness tester, you can measure the hardness of materials at a microscopic level. Typical applications include the analysis of surface treatments, coatings, or the examination of microstructures in ceramics and plastics. Modern IRHD hardness testers combine maximum precision with user-friendly operation. Many models feature digital controls, allowing you to position test points precisely and analyze results directly. This technology ensures reproducible results, even during repeated measurements. An IRHD hardness tester is not only precise but also versatile. Whether in quality control, research, or the development of new materials – these devices enable you to perform your tests at the highest level. You save time and obtain reliable results.

Condition: used, Year of construction: 2000, Suitable for manual and automatic grinding of all types of wood and metal milling cutters. Accesories: Motorized height adjustment of the grinding head Optical measuring microscope with camera Stepless grinding spindle drive 1 grinding wheel protective cover Length measuring system with digital display 5 grinding wheel holders. Workpiece diameter: Max. 240 mm Manual/motorized grinding stroke: Max. 200 mm Workpiece carrier mounting hole: 32 mm Transverse adjustment of the workpiece carrier: 150 mm Cross adjustment grinding head: 80 mm Quick adjustment grinding head: 850 mm Height adjustment grinding head: 320 mm Grinding wheel diameter: 175x20mm max Grinding spindle speed stepless: from 2000 - 10,000 rpm, Connected load approx.: 3.0kW (400V/50Hz) Dimensions W x D x H =: 1300 x 1400 x 1870 mm Weight approx.: 800 kg Ibedjxd S Hzepfx Ad Dsd colour: light grey RAL 7035

Condition: good (used), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern eyepiece-free microscope, providing a spatial 3D image without the need to place eyes against eyepieces – offering exceptional comfort for quality control and precision assembly tasks. Technical specifications: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) • Type: stereo, eyepiece-free • Illumination: integrated LED in the base • Power supply: 230 V • Head with focus and height adjustment Isdpfx Adsxtfqxj Dobd • Serial number: MFS 11572 • DGUV safety inspection – current safety test certification Condition: • Used item, optics are clean, mechanics fully operational. • Damaged upper cover of the plastic element (visible in photos) – does not affect operation or image quality. • Illumination is fully functional. • Device tested and ready for use. Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Condition: used, Year of construction: 2022, machine/vehicle number: S220193, Wafer alignment system, max. wafer size 150 mm, max. wafer thickness 4.4 mm, with optical alignment module, underside microscope and CCD camera, as well as rack unit. NOTE: The system is in like-new condition and has not yet been used in production! Ijdpfx Adsxqiias Debd

Condition: excellent (used), Vision Engineering Specifications of the microscope from Vision Engineering: Eyepiece-less Three-dimensional viewing x3.5 - x120 stereo zoom magnification Features: Optical type: Application laboratory, inspection, for research purposes, forensic medicine, for dental laboratory, for welding work Observation technology 3D Configuration Desktop device Options and accessories USB camera, zoom Magnification Min: 3 unit Max: 240 unit Ijdpfetqnklsx Ad Dsbd Description: Lynx EVO is designed to increase productivity and efficiency through superior ergonomics. Regardless of the challenge - inspection, rework or refurbishment high resolution and high contrast 3D stereo images, you will work more comfortably and and more concentrated. Magnifications from 2.7x to 240x make it ideal for a wide range of applications. Greater efficiency: Lynx EVO offers improved hand-eye coordination, more working space for tools and better peripheral vision for easy interaction with the wider working environment and transforms the way you work. With no eyepieces to adjust, you can easily share between multiple users, to get maximum return on your investment. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Keyence VHX-6000 – High-Performance Digital Microscope for Industrial Applications, Research, and Quality Assurance. Condition: Used, very good condition, fully functional. Non-smoking environment, no damage. ✅ Technical Details: Magnification: 0.1× to 5,000× (currently equipped up to 2,500×) Image resolution: up to 4,800 × 3,600 pixels Sensor: 1/1.8-inch CMOS Frame rate: up to 50 fps Isdsxtbpdopfx Ad Dsbd Depth of field: High depth of field even in live view Measurement functions: 2D and 3D measurements (angle, area, volume, roughness) Motorized axes: X-Y motorized stage (100 × 100 mm), Z-axis for 3D topography Illumination: Multi-lighting function, LED light source Monitor: 23" IPS color display, Full HD Software: License-free measurement and analysis software Power supply: 100–240 V AC, 50/60 Hz Weight: Control unit approx. 12.5 kg, camera unit approx. 1.2 kg [gebrauchtm...schinen.de], [keyence.de], [forbiomit....rostock.de] ✅ Features: Fully automated image capture and measurement Multi-angle observation without sample manipulation Creation of 3D images and surface scans Ideal for quality control, material analysis, research & development 📦 Scope of delivery: Keyence VHX-6000 control unit Camera unit 23" monitor Motorized X-Y stage Objectives (e.g. VH-Z20T, VH-Z250T) Power supply and cables Original software 🚚 Shipping & Collection: Collection in Porta Westfalica by arrangement

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle speed (max.): 6,300 rpm, spindle speed (min.): 60 rpm, overall weight: 850 kg, Equipment: rotational speed infinitely variable, Fehlmann P20 Precision drilling/milling machine Specification Manufacturer: Fehlmann Model: P20 Drilling capacity: 20mm Tapping capacity: M1 - M16 Spindle speed: 50-6300 rpm Year: 2005 Extras Fehlmann cross table Various tool holders Machine vice Heidenhain DRO Coolant system Chip guard Measuring microscope Machine documentation Etc. Ibjdoxrghispfx Ad Ded

Condition: excellent (used), Year of construction: 2002, Equipment: documentation/manual, We have 1 Benzinger 5_at_Work machine for sale: Benzinger 5_at_Work – (2002) with ATC (automatic tool changer) and magazine for 20 tools, stone setting option (space for 10 stone magazines), microscope (for ring centering), Blum laser (for tool setup and cutting edge inspection), SK30 holders (for horizontal and vertical tooling, including high-frequency pneumatic spindle). Several SK30 tool holders are available, including flycutters and high-speed holders (high-frequency pneumatic spindles). Ibedpfx Aswmbctjd Dod

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, Equipment: type plate available, ZEISS DURMAX MEASURING MACHINE WITH MEASUREMENT ROOM EQUIPMENT: 1. Granite table 2. Calipers from 250-750 mm 3. Micrometers 4. Measurement rods and gauges 5. Scales for components Iodoxqcx Iopfx Ad Dsbd 6. Surface roughness tester 7. Rockwell hardness tester 8. Gloss meter 9. Stereoscopic microscope with camera

Condition: reconditioned (used), Year of construction: 1984, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1984 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Mach. no.: 84-5532 with guarantee Accessories: - Machine stand - Microscope with support - Integrated dust extraction - Grinding wheel with flange - Pulling tool Ibjdpfxoqctp Se Ad Djd - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or when the power plug is pulled incl. production of a mounting adapter plate - Used, as seen -

Year of construction: 2015, condition: excellent (used), Clean Air Workbench Heraguard HPH 15 Thermo Scientific Iedpfx Adeiv S Ags Dsbd Used Location Cologne regularly serviced Laboratory resolution various microscopes and other equipment gladly

Condition: used, This listing is for the Essen Bioscience Incucyte Zoom Analysis System Iedpjxhfgisfx Ad Dsbd The unit is in full working condition and is ready for immediate use The IncuCyte ZOOM Live‑Cell Analysis System is a pioneering live‑cell imaging and analysis platform developed by Essen BioScience (now part of Sartorius). It enables fully automated, time‑lapse imaging—and quantitative analysis—of live cells within their native incubator environment over extended periods Hardware configuration: The microscope gantry resides inside a tissue culture incubator. The external controller handles image acquisition, storage, and processing Imaging capabilities: Supports 4×, 10×, and 20× objectives (image resolutions: ~3.05 µm/pixel at 4×, 1.22 µm/pixel at 10×, and 0.61 µm/pixel at 20×). Fluorescence: green (ex: 440–480 nm, em: 504–544 nm) and red (ex: 565–605 nm, em: 625–705 nm) channels. Can house and image multiple T‑flasks or microtiter plates—up to six at a time—and process over 2,000 images per hour. Software & analysis: Batch processing of cell metrics: confluence, cell number, morphology, fluorescence, and more. Specialty modules like NeuroTrack support neurite/dendrite analysis. Works with hardware tools (e.g., WoundMaker) and specialized software like CellPlayer for migration and scratch-wound assay

Year of construction: 2020, condition: used, functionality: fully functional, Miltenyi Biotec Clinimacs Prodigy Automated Cell Processing System. Dimensions 73.5 cm × 40 cm × 48 cm (w × d × h) Isdjttwx Djpfx Ad Debd Weight approx. 70 kg Input voltage 100–240 V~ Power consumption 810 W Frequency 50/60 Hz Pump speed 2–400 mL/min Atmosphere control Gas mix unit for CO2, compressed air, and N2; min. pressure: 1 bar, max. pressure: 2.5 bar Temperature control +4 °C to +38 °C Centrifugation Max. 2,500 rpm (400×g) Microscope camera Max. magnification: 400-fold Monitor 10.1” TFT touchscreen MACS tube sealer For sealing CliniMACS Prodigy Tubing Sets PVC tubes Types of starting material Leukapheresis, bone marrow, cryopreserved PSCs Available cell processing steps Cell washing, density gradient centrifugation, cell activation, fluorescent antibody labeling of cells, cell depletion and / or enrichment via magnetic cell separation, viral transduction, cell expansion, expansion and differentiation of adherent cells, cell culture and medium exchange, formulation of final cell product Tubing Sets and accessories Dedicated CliniMACS Prodigy Tubing Sets and Accessories available IPC/QC Integrated IPC/QC sampling pouches allow sterile sample removal Manufacture and availability Manufactured in Germany and shipped worldwide. Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2002, Used Fossil Flour Filter Della Toffola NF5 year 2002 Detailed Technical Specifications This Filter provides advanced filtration capabilities, designed specifically for the bottling industry. This NF5 model, manufactured in 2002, functions as a fossil flour filter for industrial liquid processing, offering high precision and durability. As a result, it handles impurities and microscopic particles effectively, making it ideal for applications requiring high standards of purity. Model Specifications and Operating Conditions Ibjdpfxjvgvfdj Ad Djd The Filter Della Toffola operates as a high-performance fossil flour filter. Its robust structure supports continuous operation under extreme conditions, with an operating temperature range from -10°C to +50°C. Additionally, this filter maintains a maximum operating pressure of 7 bar, delivering safe and effective filtration even in high-pressure environments. Electrical Characteristics and Performance The Used Fossil Flour Filter Della Toffola NF5 year 2002 operates at a nominal voltage of 400 volts, using a three-phase system that, consequently, ensures uniform power distribution. Notably, the maximum load current reaches 6.70 amperes, while its standard operating current is 15 amperes, confirming its ability to handle prolonged cycles without overloads. Furthermore, the device runs with 6.50 kW of installed power, enabling efficient performance even under heavy workloads. Dimensions and Weight This fossil flour filter measures 2200 mm in length, 1400 mm in width, and 1800 mm in height. Because of its weight of 470 kg, it requires adequate structural support for safe installation and movement. Therefore, operators should consider its specific footprint and weight when setting up the workspace to ensure compatibility and safety. Functionality and Safety This equipment includes essential safety devices, which are critical for minimizing risks in industrial environments. Consequently, these integrated safety systems protect both operators and equipment from potential malfunctions or suboptimal conditions. Additionally, the filter currently remains in storage condition, fully prepared for reuse with all original functionalities intact. Manuals and Documentation This machine includes detailed user and maintenance manuals that, in turn, guide proper handling of the machine. The technical documentation outlines precise procedures for installation, cleaning, and preventive maintenance, which not only improve operational efficiency but also extend the device’s lifespan. In conclusion, the Used Fossil Flour Filter Della Toffola NF5 year 2002 offers reliable filtration solutions for processes requiring precision and robustness. Its capabilities make it especially suitable for the bottling industry, where it performs optimally even in extreme conditions. Furthermore, it incorporates advanced safety features, making it an ideal choice for those who need durable and effective industrial filtration equipment.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Ibodpfx Adsd Amgke Dod Travel X and Y 200x200 mm Vertical slide travel 250 mm Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Number of T-slots 6 (longitudinal) DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports

Condition: reconditioned (used), Year of construction: 1989, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1989 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Mach. no.: 89-5054 Iedpfx Adoqctm Ne Djbd with guarantee Accessories: - Machine stand - Microscope with support - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or when the power plug is pulled incl. production of a mounting adapter plate - Used, as seen -

Condition: used, Year of construction: 1989, functionality: fully functional, grinding wheel diameter: 125 mm, overall weight: 520 kg, collet bore: 25 mm, grinding spindle speed: 500 rpm, power: 1.1 kW (1.50 HP), input current: 20 A, input frequency: 50 Hz, year of last overhaul: 2021, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 10000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! Notice: We would be happy to provide you with a free offer. However, please understand that we only accept inquiries with a complete address edit. Ibedew U Ehzepfx Ad Ded 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: * Machine stand and carrier plate ground * Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker > EMC cables and screwed connections > new protective cables > new control panel > Emergency stop switch * Opto electronic measuring device with microscope, support arm, parking space, new 2-axis Fagor digital readout and scales completely mounted and adjusted * dividing head Sk 40 with prisms and 24 R dividing disc * 1 graduated disc 14 + 22 R each * Twist and back-grinding device with rack and pinion housing * Setting gauge * Complete tooth support * pivoting support finger * LED lamp waldmann * Dust extraction device without vacuum cleaner * Univ. adjustment gauge * 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20 22/ 25 mm * Collet sleeve with forcing nut * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm by 0.5 mm each * 1 taper reducing sleeve Sk 40 x Mk 1/ 2/ 3/ 4 * 3 grinding wheel chuck L 48, 35 mm * Protective cover * Exchange grinding spindle * Tool cabinet with 4 drawers * Shelves for dto. * Operating key, operating instructions, spare parts list, circuit diagram * Machine and accessories completely overhauled and with electrical test certificate!* 6 months warranty !

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Equipment: type plate available, Coordinate measuring machine Mitutoyo EURO M 574 in excellent condition for sale. without computer and software year of manufacture: 1998 without PC!!! X - axis 500 mm Y - axis 700mm Z - axis 400 mm Ibsdpfxsu E Uzxj Ad Dod resolution: 0.0005 mm Measuring table material Granite Renishaw MH 20i probe head, Granite bed size 850 mm x 1160 mm, length standard: high-precision linear encoder centering microscope: mitutoyo CF-10 fixing and fine adjustment: one-touch air clamp for each axis continuous fine adjustment throughout the entire stroke range of each axis. effective size: 680x1160 workpiece clamping method: threaded insert M8X1.25 workpiece: Dimensions between columns 720 mm, maximum height: 480 mm maximum weight: 160 kg without PC Length measurement uncertainty ISO 10360 E = [3.5 + 4.0L/1000] µm in the temperature range of 18 ... 22 °C machine weight: 450/540kg

Condition: as good as new (ex-display), Schölly Flexilux Halogen Light Source 90W prices are EXW Iodpfx Adep Ecfwo Debd

Condition: excellent (used), For sale: a robust measuring device from the renowned German manufacturer AbaWerk Aschaffenburg. Made with a cast iron base and equipped with two hardened centering points for securing shafts and cylindrical workpieces. Perfect for use with toolmaker’s microscopes, measuring projectors, and in quality control applications. Technical specifications: • Manufacturer: AbaWerk Aschaffenburg (Made in Germany) • Center distance: approx. 115 mm • Stable, heavy cast iron base – secure clamping • Allows rotation of the workpiece between centers • Condition: used, fully functional Isdpfx Aew Sav Iod Debd Manufactured to industrial standards – precision and durability make these units highly sought after in metrology and toolmaking environments.

Condition: as good as new (ex-display), Schölly Flexilux Halogenic Light Source 150W Ijdpfx Adjp Ecfze Debd prices are EXW