Used Microstep Msf Pro 4020 for sale (28)

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser hours: 6,900 h, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, power: 10 kW (13.60 HP), year of last overhaul: 2024, working range: 4,020 mm, Equipment: cooling unit, documentation/manual, safety light barrier, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series with the following features: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic HSK 63 drilling spindle • Powerful Donaldson DFPRO 6 filter system with 7.5 kW Technical specifications: Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Transverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Acceleration Z-axis: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% EX-TRABEAM® Pro laser cutting head Bledpfx Aevw Tdlefted Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical specifications: Drilling from/to: Ø 4 mm - Ø 30 mm Threading from/to: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Automatic drilling tool measurement Pneumatic hold-down device Brush For removing drilling chips Donaldson® DFPRO 6 Cyclopeel filter system Fan power: 7.5 kW Flow rate: 4,500 m³/h Asper Nesting® | Automatic nesting software With witt Gas Mixer Machine has always been operated under a maintenance and support contract

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, working width: 2,000 mm, travel distance X-axis: 4,020 mm, travel distance Z-axis: 150 mm, Machine was overhauled in 2024. Bljdpfx Afewyaxmstjd TECHNICAL DETAILS Working area: 4,020 mm Processing area: approx. 4,000 x 2,000 mm Maximum sheet thickness: 30 mm Maximum steel thickness: 30 mm Laser cutting head: EX-TRABEAM® Pro Laser source: IPG YLS 10000 U fiber laser source Laser power: 10,000 W Power: 10 kW (13.60 hp) Traverse speed: up to 100,000 mm/min Z-axis positioning speed: 18 m/min Z-axis travel: 150 mm Z-axis acceleration: 0.75 G Drilling Drilling range: Ø4 mm – Ø30 mm Holder: HSK-63 Thread cutting range: M5 – M20 Max. material thickness: up to 25 mm Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Drilling tool measurement: automatic MACHINE DETAILS Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Filter system: Donaldson DFPRO 6 Cyclopeel Fan capacity: 7.5 kW Volume flow: 4,500 m³/h Mechanics and Control Drives: maintenance-free Panasonic AC servo motors Measuring system: IRC 2500 (incremental encoder) Hold-down device: pneumatic Chip brush: available Laser hours: 6,900 h EQUIPMENT Documentation/manual Cooling unit Safety light barrier Fully automatic shuttle table Fully automatic HSK 63 drilling spindle Cleaning and calibration station LU3K Automatic nozzle changer with 8 nozzles Donaldson® filter unit DFPRO 6 Cyclopeel Asper Nesting® automatic nesting software Witt gas mixer Maintenance and support contract

Condition: used, Year of construction: 2012, CNC Laser Cutting System Bedpsx Eh Drefx Aftsld Manufacturer: Microstep Model: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC Control: iMSNC Windows Approx. laser operating hours: 4,000–5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Maximum sheet thickness - Steel: 15 mm Maximum sheet thickness - Stainless steel: 8 mm Maximum sheet thickness - Aluminium: 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20°C) Extraction duct (left & right): Outlet left Ø 250 mm Laser source: IPG Ytterbium Laser System YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3-phase / 50 Hz Filter unit: TEKA 4H 5.5 kW Overall dimensions: approx. 10,400 mm x 3,610 mm

Condition: ready for operation (used), Year of construction: 2017, controller manufacturer: MicroStep, This MicroStep Fiber MSF 3001.15L was manufactured in 2017. It features a 3m x 1.5m cutting table, 4kW IPG YLS laser source, and a HighYag cutting head for perpendicular cuts only. It includes Donaldson extraction and filtration equipment and automatic layout planning software for flat sheets. Consider the opportunity to buy this MicroStep Fiber MSF 3001.15L fiber laser cutting machine. Contact us for more information. Additional equipment • 4kW IPG YLS laser source • Donaldson extraction and filtration equipment Blsdeyaiy Sspfx Afted • Automatic layout planning software for flat sheets Machine Benefits Technical Machine Benefits • 3m x 1. 5m cutting table with hydraulic pallet changer • Highyag cutting head for perpendicular cutting only Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2016, This MicroStep Fiber MSF 4001.20L was manufactured in 2016. It features a 4m x 2m cutting table with hydraulic pallet changer, an automatic feeding tube cutting system for tubes up to 200mm diameter and 6m length, and a 4kW IPG YLS laser source. Includes Donaldson extraction and filtration equipment. Consider the opportunity to buy this MicroStep Fiber MSF 4001.20L fiber laser cutting machine. Contact us for more information. Additional equipment Bljdpfx Ajyaiy Ejftod • Donaldson extraction and filtration equipment • Automatic layout planning software for flat sheets • Tube cutting layout planning software Machine Benefits Technical Machine Benefits • 4m x 2m cutting table with hydraulic pallet changer • Automatic feeding tube cutting system, up to 200mm diameter and 6m tube length • 4kw ipg yls laser source • Highyag cutting head for perpendicular cutting only Extra Information Machine still under power

Condition: ready for operation (used), Type: DS 6001.20P Bjdpfxjyi Ic Rs Aftsld De conventionele plaatbewerkingslijn DS is ontworpen voor zeer efficiënte boren en plasmasnijden, met de mogelijkheid tot automatische plaatinvoer en automatische sortering van onderdelen bij de uitvoer. De machine is speciaal ontworpen voor zware toepassingen in constructiestaal, zoals de productie van zeer nauwkeurige fittingen, hoekplaten en eindplaten. Plasma: - 3D plasma-afschuurkop voor recht snijdend en schuin snijden tot +-50° - Hypertherm XPR 300 (doorboring 45 mm) - Maximale plaatgrootte: 6000 x 2000 mm - materiaaldikte: 3 30 mm - laserlicht Plasmamarkering Boren: - MG-40 P26 boorapparaat ISO 40 - boorbereik: diameter 4 40 mm - draad: M4 M33 - maximale dikte: 100 mm - slak: 400 mm - 26 kW op spindel ISO 40 - max. 1829 tpm - automatische gereedschapswisselaar; 8 gereedschapsposities ISO 40 - externe en interne gereedschapskoeling CNC-besturing: iMSNC-systeem voor Windows® 10TM' 64-bit PRO met geïntegreerde netwerkkaart en USB-poort Met een vacuümzuigsysteem kunnen platen op de snijtafel worden geladen Totaalgewicht: 30 ton Benodigde ruimte: 16 500 x 7100 mm

Condition: used, Year of construction: 2014, Plasma cutting machine Manufacturer: Microstep Model: MasterCut-P 3001.20 Year of manufacture: 2014 Operating hours approx.: 7,024 Control: iMSNC Working area: 3,000 x 2,000 mm Bljdpfx Asypdl Ijfted 1 plasma torch power source Kjellberg HiFocus 280i neo with Allgas console Integration of HiFocus 280i plasma source into the control system Remote maintenance access via TeamViewer 15 m hose package Without extraction system 1 x nesting software Asper Win Basic + automatic nesting installed on machine control Allgas = allows changing the gas to adapt cutting quality and cutting speed to the material.

Condition: used, Year of construction: 2019, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Model: MG 4501.20 BkP Year of Manufacture: 2019 CNC Control Working Area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source including Optimix gas console 1 x drilling spindle, 26 kW, up to 40 mm diameter, including 8-station automatic tool changer 1 x preparation for retrofitting a rotator (for bevel cuts) 1 x nesting software on the CNC controller ä25226 Blsdpfx Afeyay H Astsd Availability: May 2026

Condition: good (used), Year of construction: 2012, CNC gantry plasma cutting machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 Bledpeu U Hm Ajfx Aftjd CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 oxy-fuel torches (propane) Beuting oscillating conveyor table Donaldson DFPRO12 filtration system for outdoor installation 25226ä

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m "MasterCut" plasma rotator with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source TEKA filtration system Bedjxnmbnopfx Aftsld No. 25226

Condition: good (used), Year of construction: 2011, CNC Portal Flame Cutting Machine Manufacturer: Microstep Model: MasterCut-AM 9001.20 Year of manufacture: 2011 CNC Control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Bsdpfx Aoudn Rzefteld Extraction table 1 oxy-fuel torch Cutting thickness up to 150 mm 1 Kjellberg plasma marking unit Laser pointer Technical specifications in detail: 1x oxy-fuel torch (fully automatic) 1x Kjellberg Finsterwalde plasma marking unit (fully automatic) MicroStep® CNC machine control iMSNC with integrated network card LCD operator panels on the gantry Laser pointer with automatic offset transfer iMSNC control parameter database / Windows® Programming system “AsperWin-Basic” for direct programming at the machine control Macro library module “AsperWin Select” NC simulator module “AsperWin NC-Sim” Module “Plasma marking” (for scribing/centering) via plasma source THC module / Automatic height control via arc voltage USB 2.0 interface for external storage MicroStep® remote diagnostics module “iFDS Win” Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 torch Energy supply cables Gas hoses for heating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylen FIT+ 1 set capacitive height control IHT / for oxy-fuel 1 set electric ignition unit RHÖNA-Acetylen Double-sided cable protection (collision protection) of the gantry bridge via emergency stop Kjellberg® FineMarker plasma marking unit Fully automatic support for FineMarker Kjellberg® FineMarker plasma marking system CNC interface for FineMarker / integration with CNC control Module for automatic control of the marking unit

Condition: used, Year of construction: 2023, CNC Gantry Plasma Cutting Machine with Rotator Manufacturer: Microstep Model: MasterCut 6001.30PtkG Year of Manufacture: 2023 CNC control system Working area: 3,000 x 6,000 mm 1 plasma torch with Kjellberg Q3000 power source 1 oxy-fuel torch GCE FIT+ three (cutting gas: acetylene) Burning/cutting table with sectional extraction, 6,000 x 3,000 mm Plasma rotator 'MasterCut' with fully automatic support ACTG automatic calibration unit for the beveling head Kemper extraction system 8000 (year: 10/2015) Asper Basic 2D programming software + Asper BevelCut bevel cutting programming Other technical data: MicroStep machine control system with MMI console and 24" touchscreen iMSNC module expert system Bedjxu U Ddjpfx Afteld iMSNC module for automatic calibration of mechanical probing iMSNC module assistant for loading CNC programs LCD control unit on the gantry Laser pointer with automatic offset transfer USB 3.0 connectivity for storage devices MicroStep RemoteDiagnostics remote maintenance module Grate cover in the cutting table Reinforced version of the cutting table Connection of the fine plasma source to CNC control Automatic gas console control Electric and mechanical torch height sensing LED signal column on the gantry bridge (2 colors) Tactile safety shut-off device for guide rails Light curtain safety system (collision protection) on the gantry bridge via emergency stop Smart Z Movement ACTG calibration report Fully automatic oxy-fuel support Automatic gas console for oxy-fuel torch (cutting gas: acetylene) Active collision protection 25226ä

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 3001.15P Blodpfxoydibqo Afted Year of manufacture: 2023 CNC control Working area: 1,500 x 3,000 mm 1 x plasma torch with Hypertherm Powermax 45 power source Air plasma system Cutting thickness: 12 mm piercing For thin sheet metal Without filter Available: March 2026

Condition: good (used), Year of construction: 2007, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL-P 12001.20 Year of manufacture: 2007 CNC control 1 plasma torch with Kjellberg HiFocus 160i power source Extraction table: 2 x 12 m Blsdpfsuv Hkgox Aftjd Donaldson Torit DCE filtration system

Condition: good (used), Year of construction: 2008, functionality: fully functional, Fully operational plasma cutting machine in very good condition. MicroStep PLS 7501.25PG Blsdpfx Ajwinpxeftod Equipped with two torches: plasma and gas. Power source: Hypertherm, HyPerformance Plasma HPR260. Cuts mild steel and stainless steel. Table dimensions: 7.5 m x 2.5 m. The machine can be inspected under power in Vilnius.

Condition: ready for operation (used), Year of construction: 2021, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information. • Working dimensions: 1500 x 3000 mm • Permissible plate thickness: stable construction up to 100 mm material thickness • Guides/Drives: high-quality linear guides and double-sided clearance-free drive • Axis control: digital, maintenance-free AC servos with IRC • Positioning speed: up to 40,000 mm/min Blsdpfx Afjycvq Aeted • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic Core gas console • Table surface: grid cover in the cutting table • Height control: "THC" module for automatic height regulation via arc voltage • Marking unit: "MicroPunch" needle marking unit • Safety features: double-sided rope safety system (collision protection) for the gantry via Emergency Stop • Visual signaling: 2-color LED signal tower on the gantry bridge • Operation interface: externally standing MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Bodpfx Afjwmqwyetjld

Year of construction: 2023, condition: ready for operation (used), A new CNC plasma cutting machine MicroStep including air plasma power source Hypertherm, nesting program and Aigner filter system is available. 1) CNC plasma cutting machine MicroStep MasterCut Compact, year of manufacture: 2023, processing dimensions X/Y: 3000mm/1500mm, machine dimensions X/Y: approx. 4350mm/2650mm, weight: approx. 3100kg, plasma source: Hypertherm Powermax 45 XP, control: MicroStep iMSNC, operating hours: approx. 2588h. 2) Plasma cutting and gouging unit Hypertherm Powermax 45 XP, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter system, weight: approx. 500kg. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025. Bljdpfx Aewn H Udsfted

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: AC, sheet thickness (max.): 200 mm, overall weight: 7,500 kg, input voltage: 400 V, cutting speed: 300 mm/min, cutting height (max.): 230 mm, table length: 13,975 mm, working width: 2,200 mm, table width: 2,200 mm, positioning accuracy: 0.5 mm, working length: 12,700 mm, 1 plasma & 1 gas (natural) torches 200 Amps Hypertherm HD4070 plasma source 1 owner throughout all service life Good condition, still in operation Bedpfx Afjwltwajtjld Set of technical documentation (users + maintenance manuals) Filter unit GTV included Nesting program Asper license + PC included Assistance in dismantling, packing, loading (to be negotiated separately) Organizing of transportation to countries of the European Union (at separate quotation)

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm Blodpog N Nlvefx Afted 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 4100 mm Measurements depth 10169 mm Machine weight 5500 kg Control Unit Brand MicroStep Model IMSNC Main Drive Number of axis 3 Bjdpfsx D Ey Ijx Afteld This 3-axis MicroStep PLS 7501.25PG plasma cutting machine was manufactured in 2008. It features a robust MicroStep MSNC500 control system and dual cutting capabilities with a HPR 260 AGC plasma and an acetylene gas burner. The machine offers a maximum cutting thickness of 50 mm and operates efficiently within a large working field. If you are looking to get high-quality cutting capabilities, consider the MicroStep PLS 7501.25PG machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2011, This MicroStep EasyCut 6001.25PrGB was manufactured in 2011. It is a CNC plasma/oxyfuel cutting machine designed for industrial, heavy-duty applications. Features include a large working area of 6000 × 2500 mm, dual-side driven gantry, and compatibility with CAM software like mCAM and AsperWin. It supports up to 6 oxyfuel torches and offers options like automatic height control. Note: the gas console is defective. Contact us for more information about this machine. Bledpjx D Hz Hefx Aftjd Application Types Cutting

Condition: good (used), Year of construction: 2019, Gebruikte waterstraalsnijder van Microstep (ex lease) Bedpoxldvqjfx Afteld Type: AquaVut 6001.25 WW Tafelafmetingen: 6000 x 2500 mm Hypertherm 4100 bar pomp 2 snijkoppen Bouwjaar: 2019

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 Bljdpfxswhk E He Aftsd AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,200 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, pressure: 4,000 bar, TECHNICAL DETAILS Working area: 2,000 × 3,000 mm Operating system: Windows 10 Pro (64-bit) High-pressure pump (ECOTRON® 40.37) Flow rate: 3.8 l/min Operating pressure: 400 MPa Blsdpfswcqi Uox Aftod Oil capacity: 130 l Temperature range: 10 – 35 °C Water consumption: 10 l/min Abrasive dosing system (ALLFI) Tank capacity: approx. 1,400 kg Flow rate: 2 kg/min Weight: 1,500 kg MACHINE DETAILS Dimensions (L × W × H): 1,800 × 800 × 1,150 mm Weight: 1,000 kg Pump operating hours: 1,200 h Electrical connection Connection: 400 V Total power requirement: 37.0 kW