Used Mig Mag for sale (3,567)

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Ljdpfx Afexgtd Hszorg Drive motor 55 kw

Condition: used, Year of construction: 1990, Bottle washing machine MAG Sirio 8 3,000–11,000 bottles/h Ledpsx N I Egjfx Afzerg Bottle size: 0.2 l – 1.0 l Year of manufacture: 1990 Fully operational, runs until March 2026.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S.1003825.001, faceplate diameter: 800 mm, workpiece length (max.): 800 mm, workpiece width (max.): 720 mm, TECHNICAL DETAILS Faceplate diameter: 800 mm Clamping diameter: 800 mm Max. workpiece dimensions: 800 x 720 mm Tool interface: Capto C6 Ljdpsxvrhvjfx Afzsrg Tool magazine positions: 2 x 80 MACHINE DETAILS Total power requirement: 110 kW Dimensions & Weight Approximate machine weight: 37,000 kg / total 52,000 kg Transport dimensions (machine): 5.07 x 2.98 x 3.90 m EQUIPMENT C-axis

Condition: ready for operation (used), Year of construction: 2011, operating hours: 50,457 h, functionality: fully functional, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 30 m/min, turning diameter: 200 mm, total length: 8,500 mm, total height: 3,800 mm, total width: 4,300 mm, type of input current: three-phase, workpiece diameter (max.): 250 mm, overall weight: 15,000 kg, controller model: Siemens 840 D sl, For sale is a MAG DVT250, year of manufacture 2011. Equipped with a Siemens 840 D sl control system. Equipment: - Infeed and outfeed conveyor - Chip conveyor (discharge to the right) - Coolant system - 2x tool turrets 12x VDI30 The machine is under power and can be inspected. *The marking unit (Richter [picture 1 right]) is defective and not part of the listing. Ledpfxsxc Enio Afzorg

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Ledpfxotrbrqs Afzorg

Year of construction: 2013, condition: ready for operation (used), Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible. Lrsdpfovwcwuox Afzjg

Condition: good (used), Year of construction: 2018, Burning-Drilling System Plate Processing Center Manufacturer: Vernet-Behringer Model: MAG EVO 420 Year: 2018 CNC Control Lredpfx Asvzrczjfzeg Power Source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm automatic tool changer tool capacity: 14 positions drive power: 16 kW Drilling diameter: 5 - 40 mm V-Scoring marking: 5 to 40 mm Minimum sheet size: 1,500 x 300 mm (750 x 400 mm with limitation) Minimum finished part size: 80 x 80 mm Maximum sheet weight: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero position cross conveyor Number of carriages: 2 grippers NC feed carriage, laterally positioned 4 clamping grippers (2+2) 3 short-stroke cross conveyors Working height: 1,000 mm Discharge side: Discharge roller conveyor with lowering unloading table and chute into material collection container for unloading small parts. Filter unit including piping High performance for use with carbide tools. Suitable for drilling, thread cutting, marking, milling, and plasma cutting of flat steel and plates. Software options for milling and scoring LANTEK license ä21126 Availability: immediate!

Condition: new, AB-1510DEX Range 1500mm Lifting capacity: 6KG Supply voltage: 220v ±10%,1 phase, 50 Hz Source: AOTAI MAG-350RL (350A , Supply voltage: 380v ±10%, 3 phase, 50 Hz) Lrsdpfxeu Tgwfe Afzog After-sales and warranty service begins with the delivery of machine to the Buyer (consumable parts are not included in the warranty). Warranty period: (a) robot with controller - 12 months, b) welding source - 12 months, c) remote control (without screen) - 3 months.

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) Ledpfx Aox U U Hbjfzsrg TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] More information available upon request.

Condition: used, Technical data: see image Lredpfxsxz Amye Afzjg

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Lodpfehnc E Aex Afzerg Please contact us and we will send you an attractive offer.

Condition: good (used), Year of construction: 2015, functionality: unexamined, - Total stroke: 300 mm - Maximum press force: 68.9 kN - Power: 0.3 kW - Min/max air pressure: 3 - 6 bar - Machine weight: 1250 kg Lrsdpfx Afswxvwiozjg

Condition: good (used), 1 MIG/MAG welding machine Manufacturer: Merkle Lrsdexpf N Tjpfx Afzsg Model: MobiMIG 320 K Technical specifications: Input voltage: 3 x 400 V Adjustment range: 25 - 320 amps Duty cycle: 40% at 300 amps, 60% at 270 amps, 100% at 240 amps Current adjustment: stepless Cooling: Inverter cooled by integrated fan; Torch: gas-cooled Design: portable assembly unit Wire feed mechanism: 4-roll drive DV 26 Fuse protection: 16 amps Dimensions: 600 x 300 x 565 mm

Condition: used, Year of construction: 2023, functionality: fully functional, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, workpiece height (max.): 100 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 200 mm, input current: 16 A, This machine has been used for several years. It has been checked, tested and is working 100% properly. The F200 XL is a 3-station machine suitable for deburring, grinding and/or rounding small sheet metal parts. This deburring machine has a grinding unit as its first processing station, followed by two cup brushes. The grinding belt removes burrs or gives the product a nice line finish. The brushes ensure the desired rounding of the product and give the surface an even finish. The F200 XL can be equipped with either a vacuum system Ledpfxsx U Dx Hs Afzerg (for non-ferrous metals, e.g. stainless steel and aluminium) or a magnetic system (for ferrous metals). These systems ensure effective fixation of the products to be processed on the transport table, allowing even smaller workpieces (from 10 x 10 mm with magnetic system) to be processed safely, smoothly and quickly. It is with good reason that we at Q-Fin are convinced of the benefits of a narrow machine for small workpieces. In many cases, the throughput speed of this machine is 5 times higher than that of comparable machines.

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 1,795 mm, total width: 2,210 mm, total height: 1,085 mm, overall weight: 1,400 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has been in use for several years. It has been checked, tested and is working 100% properly. Removing slag is a labour-intensive task that often still involves the use of a hammer and chisel. Alternatively, an electrically powered hand-held machine can be used for this purpose. Due to the heavy load during operation, both for the operator and the hand-held machine, these hand-held machines need to be replaced regularly. This results in high costs, additional waste and possible health problems for the operator. Manual slag removal is time-consuming and stressful for both the operator and the machines, leading to high costs and wear and tear. The DS600 and DS1200, specially developed by Q-Fin, automatically remove slag after plasma or oxy-fuel cutting. These machines can be easily integrated into any production line, removing slag before the product reaches the deburring machine for edge rounding. Ljdpfx Ajx Ux Rwjfzsrg The removed residue is collected in a container and can be disposed of as scrap. By performing slag removal separately, contamination in the deburring machine is prevented. Both models are ergonomically designed with touchscreen controls for ease of use. The slag is effectively removed by two counter-rotating slag removal rollers, which strike the product twice per revolution. The result is a flat product that is ready for further finishing.

Condition: used, Technical details: welding current: 500 A weight of the machine approx.: 128 kg dimensions L x W x H: 1,2 x 0,8 x1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Lodpsvz Abhjfx Afzsrg Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 4.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 4.7 m Wire feed: 4 roller drive with wire Ø for 1.0/1.2 mm *

Condition: used, Technical details: welding current: 500 A weight of the machine approx.: 129 kg dimensions L x W x H: 1,1x 0,7 x 1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Lrodpfxswtctms Afzsg Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 3.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 2.5 m Wire feed: 4 roller drive with wire Ø 1.0/1.2 mm *

Condition: used, Technical details: welding current: 500 A Length: 1000 mm height: 1350 mm welding current - continuous: 50-500 A weight of the machine approx.: 282 kg dimensions L x W x H: 1,0 x0,6 x1,35 m MIG-MAG welding machine Switchover 2/4-cycle, stepless, welding current display Water-cooled and frost protection Shielding gas solenoid valve Small hose package Torch head Ledpjv Rbdtofx Afzerg Wire feed 4-roller drive for wire Ø 0.8/1.0/1.2mm Earth CABLE PLEASE ON REQUEST! *

Condition: used, Technical details: welding current: 440 V weight of the machine approx.: 242 kg dimensions L x W x H: 1,5 x 0,8 x 1,3 m MIG/MAG control unit: with 2/4-cycle switchover with 3x12 welding stages Cooling system: water-cooled with frost protection Shielding gas with solenoid valve and pressure reducer Hose package 3.6 m long Torch head Lrjdpfx Ajvz Advsfzsg Ground clamp with ground cable 4.8 m long Wire feed with 4 roller drive for wire diameter: Ø 1.0 mm/Ø 1.2 mm *

Condition: ready for operation (used), Siemens 1FT5066-0AC01-2 - Z permanent magnet motor SN E0T98376301008 Z = holding brake installed + prepared for encoder system + 06I0 H33K rotary encoder, used, minor signs of wear, 100% functional, scope of delivery as per photos Ledsmbr I Dopfx Afzorg

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 24 months, hose package length: 4,000 mm, welding current at 60% duty cycle: 273 A, welding current at 100% duty cycle: 212 A, welding current (min.): 30 A, welding current (max.): 300 A, OTC CPTX-i 300C 30-300A Synergic 4 Roller Drive Fixed Programs Steel & Stainless Steel Weldable Including: 4 meter PRO2500 Mig Welding Torch 5 Meter Earth Work lead with Clamp and Dinse plug Gas cable 0,8-1,0mm Wire feed rolls Pressure regulator Manual Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. Lredpjx Rgvtsfx Afzog We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: ready for operation (used), Siemens 1HU3104-0AH01-Z Permanent Magnet Motor, Z= see nameplate SN E6B61004703007. Professionally fully overhauled and tested with 24 months warranty, 100% functional. Scope of delivery as per photos. Agreed sales discounts do not apply to this item. Please enquire for price separately! ATTENTION: Please enquire separately for packing and shipping costs! Lodpfjx Dvnisx Afzsrg

Condition: ready for operation (used), Siemens 1HU3076-0AC01-Z Permanent Magnet Motor Z= see nameplate SN: E7C67767401003, professionally fully overhauled and tested, with 24 months warranty, 100% functional, delivery as per photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Ljdpfx Afjx Dvimozorg

Condition: ready for operation (used), Siemens 1HU3102-0AH01-Z Permanent Magnet Motor Z = see nameplate SN: E5M61141001005, professionally fully overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos. Agreed sales discounts do not apply to this item. Please request the price separately! Lrjdpox Dvmfsfx Afzeg

Condition: ready for operation (used), Siemens 1HU3104-0AH01-Z Permanent Magnet Motor Z= see nameplate SN: E8G863902110001, professionally fully overhauled and tested with 24-month warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please enquire about the price separately! ATTENTION: Please enquire separately about costs for packaging and shipping! Lrsdpfxox Dvnpj Afzog