Used Mikron Wf 31 C for sale (177)

Condition: used, Year of construction: 1968, max. wheel diameter 120 mm gear width 130 mm max. module 2 no. of teeth to be hobbed 6-325 Z min/max. spiral pitch 20-5000 mm hobbing length 130 mm weight of the machine ca. 860 kg Universal hobbing machine MIKRON 102.05 MPS > External surface gearing Gusdpfxezuplis Af Aof Technical data: Maximum millable workpiece diameter: 120 mm Maximum millable length: 130 mm Maximum number of modules: 2 Number of millable teeth: 6-399 (with gear ratio 80:5) Pitch of the spirals: 20 - 5000 mm Pitch angle of the spirals (left or right): 0 - 90° 14 milling cutter revolutions (50c/s): 140 - 1870 rpm 13 Axial feeds: 0.05 - 3.0 mm/w.p.rev. Main motor speed: 1500 rpm Main motor power: 1.1 kW Connected load: 3 x 380 VAC Frequency: 50 Hz Control unit: Omron CP1L Machine dimensions L/W/H: 1030x800x1520 mm Weight of the machine: 880 kg

Condition: repair required (used), Year of construction: 2001, X-axis: 400 mm Y-axis: 240 mm Z-axis: 350 mm Spindle speed: 42,000 rpm Tool holder: HSK-E40 UPC pallet system: 320 x 320 mm Control system: HEIDENHAIN TNC 430 M Guodpfoznk Ryex Af Ajf The machine is not ready for operation; the spindle needs to be replaced.

Condition: excellent (used), Year of construction: 2006, X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 895 mm Gjdjzclk Sjpfx Af Aeuf A-axis: +16 to -120 degrees Rotary table: Diameter 1,100 x 1,000 mm Max. workpiece size: 1,000 x 1,000 x 500 mm Max. table load: 1,600 kg Tool interface: HSK-A63 Tool changer: 46 positions Spindle speed: 24,000 rpm Control system: Heidenhain ITNC 530 Space requirement (including door clearance): 5,605 x 4,290 x 3,159 mm Weight: 12,500 kg Includes coolant system, 40 bar Includes documentation

Condition: good (used), Year of construction: 1995, Mikron UME 600 Year of manufacture: 1995, Digital control: Heidenhain TNC 407 Spindle stock as per specifications X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Spindle speed: 5 - 5000 rpm Quill travel: 90 mm Total power consumption: 9 kW Guedpfxozr T U Aj Af Ajf Feed rate range: 0-10,000 mm/min Machine weight: approx. 3260 kg Space requirement: approx. 2200x2800x2000 mm Spindle: 6 kW Vertical milling head with hydraulic tool clamping system SK 40

Condition: excellent (used), Year of construction: 2015, Mikron HPM 800U HD 5 axis Vertical Machining Centre, with 7 pallet changer (2015) Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, Gjdszm Ticepfx Af Asuf A axis -91 / + 121 degrees, C axis, 360 degrees, Heidenhain TNC530, Spindle Speed 20,000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 165 tools, swarf conveyor, through spindle coolant,

Condition: ready for operation (used), Year of construction: 1998, A Mikron CNC vertical machining center is available. Travel X/Y/Z: 900mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: approx. 500kg, tool holder: SK40, speed: 5000rpm, rapid traverse: 10m/min, feed: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 5000kg, control: Mikron, operating hours: approx. 35580h. The main control board of the machine has a defect. Including approx. 100 SK40 tool holders and tools. An on-site inspection is possible. Gjdszf Ncispfx Af Aeuf

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Guedpfx Asw Emx Ref Ajf

Condition: excellent (used), Number of paletts 18 Godjilp Euspfx Af Asuf Carrying force 25 kg Max. height of workpiece 350 mm Max. diameter of workpiece 230 mm Misc. accessories MARCELS MASCHINEN AG

Condition: used, EQUIPMENT - With automaton Zellio SR3 type Gedpfx Aeuhbqpof Aouf - Tilting loader no. 11 and vibratory bowl - part diameter 2.50 to 12.5 [mm] - part length 0.30 to 30 [mm]

Condition: used, Year of construction: 1997, Mikron UME 600 - Vertical Machining Center Tool holder: SK40 X/Y/Z: 600 / 500 / 450 mm - Heidenhain TNC 407 CNC control - SARA UC1 SD3 air purifier - Coolant system - Chip conveyor - Year of manufacture: 1997 Technical data - Spindle taper: SK40 - Travel range X-axis: 600 mm - Travel range Y-axis: 500 mm - Travel range Z-axis: 450 mm - Feed rate range: 0 - 10000 mm/min - Spindle speed: 5 - 5000 rpm - Quill stroke: 90 mm - Table size: 900 × 530 mm - Spindle power: 6 kW - Total power requirement: 9 kW - Operating voltage: 400 V - Space requirement with control & extraction unit WxHxD: 3500 x 3000 x 3500 mm - Dimensions without control & extraction unit WxHxD: 2400 x 2100 x 2700 mm - Total weight: approx. 3400 kg Gsdpfezpymyex Af Ajuf

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: Serien-Nr.: 107.84.00.188,, CNC machining center, manufacturer: Mikron, type: HSM 400, year of manufacture: 2005 Serial number: 107.84.00.188, travel ranges (x/y/z axis): 400x450x350 mm, tool interface: HSK40E, max. spindle speed: 30,000 rpm, spindle drive: 13 kW, recorded operating/load hours: 44,899/32,369 (13,350 spindle hours since replacement) CNC control system HEIDENHAIN iTNC530 Pallet table PPC 320x320 mm, 7-position pallet changer, 68-position tool changer, 1 Coolant unit BURN, 1 extraction system KELLER L-Cut year of manufacture: 2012, Setup probe PS 32 Godpfozdtacjx Af Aouf (WITHOUT any further accessories) The price includes dismantling, transport, and loading onto your truck!

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Gujdpfst Hw D Rox Af Aef Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 Gsdorc Ilgjpfx Af Aouf -Dimension: 145/110/H55 mm -Weight: 0.4 kg

Condition: good (used), Safety switch, safety switch, protective grid switch -Manufacturer: Euchner, Safety switch from CNC milling machine Mikron UME 600 -Type: TZ2LEO24M ID No.: 090559 Technical data: see photo of the nameplate Quantity: 1 piece available Godpfx Ajrb E E Eof Aouf -Dimensions: 170/110/40 mm -Weight: 1.1 kg

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining center Mikron UME 600 -for: max. 22 shots -Intake: SK40 -Dimensions: 1200/1150/H860 mm -Transport weight: 294 kg Gusdpfjrb E E Nsx Af Asf

Condition: good (used), PLC control, mains filter, mains filter, Simodrive choke transformer Guodjrbm Uhepfx Af Aof -Manufacturer: Siemens, Simodrive 611 choke and transformer from CNC machining center UME 600 -Chorus: Type 6SN 1111-0AA00-0BA0 -Transformer: Trasfor TNT BN 2K5/E -Price/Delivery: complete -Dimensions: 525/240/H230 mm -Weight: 33.6 kg

Condition: used, Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron UME 600 -Motor: Siemens 380V 3.7/5.25 kW see photo nameplate -Speed: 1500/9000 rpm -Spindle head: SK40 mount -Dimensions: 1550/560/H735 mm -Weight: 555 kg Guedpfx Afjrc Ik Hj Aef

Condition: used, Auxiliary circuit breakers, circuit breakers, circuit breakers, load disconnectors, load disconnectors, circuit breakers, circuit breakers, auxiliary switches, main switches -Manufacturer: Mikron, main switch switch disconnector from CNC milling machine Mikron UME 600 -Adapter: Heidenhain Type: 239 758 01 -Dimensions: 430/150/115 mm Gusdpfxerc Ilno Af Asf -Weight: 1.1 kg

Condition: good (used), PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 -Safety module: Type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg Guedpfx Aerb E Ewof Asf

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module Gedjrb E Hmepfx Af Ajuf -Manufacturer: Siemens, Simodrive 611 I/R module INT. 16/21KW CNC milling machine Mikron UME 600 -Type: 6SN1145-1BA00-0BA0 -Dimensions: 290/100/H480 mm -Weight: 10.6 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: Mikron, milling machine table T-slot table from CNC machining center UME 600 -Table surface: 530 x 900 mm -T grooves: groove width 14 mm, groove spacing 63 mm -Transport dimensions: 900/530/H390 mm Gusdpfsrbm Udsx Af Ajf -Weight: 248 kg

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: X: 1200mm Y: 600mm Z: 500mm Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Accessories: 20 tool holders HSK-A63 2 vices Guedpszkbr Tofx Af Ajf Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Condition: good (used), Year of construction: 1996, Travel X/Y/Z 600/500/450 mm, Control HEIDENHAIN TNC 410 PA, spindle power 9,0 KW, spindle speed 5-6300 rpm, ISO40, table size 530x900 mm, max. table load 400 kg, tool changer 22 places, dimension 2200x2700x2050 mm, ca. 3550 kgs, accessoires Renishaw tool prove, 4th axis TRIAG with clampings, Software updated, flat screen, radio data transfer installed, tool holders, manuals Guodoqagugjpfx Af Ajf

Condition: good (used), Year of construction: 1995, functionality: fully functional, 1 x used milling machine Mikron UME 600 Year of manufacture: 1995 Control system: TNC 407 Heidenhain X-axis travel: 600 mm Y-axis travel: 500 mm Gedszkhclepfx Af Ajuf Z-axis travel: 450 mm Spindle speeds: 5 - 5000 rpm Quill travel: 90 mm Total power consumption: 9 kW Feed rate range: 0-10,000 mm/min Machine weight (approx.): 3260 kg Machine dimensions (approx.): 2200x2800x2000 mm Spindle motor: 6 kW Vertical milling head: SK 40

Condition: used, Year of construction: 2012, functionality: fully functional, operating hours: 43,100 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain iTNC530, table length: 500 mm, table width: 630 mm, controller model: 530, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, rapid traverse Z-axis: 61 m/min, rapid traverse X-axis: 61 m/min, rapid traverse Y-axis: 61 m/min, spindle speed (max.): 20,000 rpm, MIKRON HPM 800 U Year of manufacture 2012 5-axis A-axis -91°/121° C-axis 360° Spindle 20,000 rpm Heidenhain iTNC530 control system Blum laser for tool measurement and breakage detection Infrared measuring probe 210 tools - HSK 63A 7-position pallet changer Knoll high-pressure system 70 bar, 23 L/min Gedswa Alijpfx Af Aeuf Knoll scraper belt chip conveyor