Used Mikron Wf 31 C for sale (192)

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm Kwedpjtv Ia Tofx Ab Tou z-travel 350 mm table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: good (used), Mikron WF31D Precision milling and drilling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shiftable stepped gearbox and Poly-V-belt. Vertical spindle can be extended by 90 mm; changeover from vertical to horizontal machining possible. Recirculating ball screws with DC drives enable simultaneous feed movements. Guides are protected against dust, chips and coolant. Technical data Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Vertical movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm. Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equipment Total installed rated power: 10.0 kW installed effective power: 7.3 kW. Operating voltage: 3 x 380 V - 50/60 Hz Protection class: IP 54. Max. permissible ambient temperature: +35 °C Relative humidity: 75 %. Dimensions and weights Ksdpfx Abowiucfj Tswu Width 2450mm Length 2800mm Height 2000mm Net weight of the machine: approx. 2570 kg. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg Kedpfefbma Nsx Ab Tewu

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module Kwsdpfxjrb E Hbs Ab Tju -Manufacturer: Siemens, Simodrive 611 LT module INT. 50A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0CA0 -Dimensions: 290/50/H480 mm -Weight: 6.8 kg

Condition: used, functionality: fully functional, Mikron WF 21 C Brief description: CNC tool milling machine Description: Immediately available from site due to business closure: CNC tool milling machine Mikron Model WF 21 C Year of manufacture: 1980 Kwedpfxsx Scvfo Ab Teu Control: Heidenhain TNC 155 Table: 800 x 460 mm Travel X / Y / Z: 500 / 500 / 400 mm Tool holder: SK 40 Spindle speeds: 24 - 3150 rpm Weight: 2.2 t

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 956.71.80.274, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, input voltage: 400 V, Equipment: documentation/manual, The system shown is in perfect condition and ready for immediate use. Kwodpfx Abswnq Sgs Teu No heavy roughing work has ever been performed with this machine. The machine is being sold together with a vise, including a tool cabinet with the shown contents. Additionally, it comes with 2 sets of ground supports and approximately 80 cutters, all in usable condition (some barely used), some as good as new, mostly coated in solid carbide, suitable for machining steel and aluminum.

Condition: good (used), Manufacturer: Mikron | Model: WF 3DP | Serial number: 956 71 80 274 | Control: conventional with digital readout for X, Y, and Z axes | Table: cross table with T-slots | Axes: X / Y / Z manually traversable | Spindle: vertical milling spindle | Speed range: multi-step changeable as per speed plate | Feeds: mechanically switchable | Cooling: coolant system present; table size 800 x 450 mm; machine vice; drawer cabinet with accessories; | Dimensions: approx. 2000 mm x 1800 mm x 1600 mm (HxLxW) | The listed dimensions are approximate values. All other details without guarantee. | Green | Steel Kjdpfx Aeyibx Njb Tjwu

Condition: used, Year of construction: 1990, x-travel 450 mm y-travel 400 mm z-travel 400 mm Kwedpfxjpxrknj Ab Tou control Heidenhain 355 total power requirement 4 kW weight of the machine ca. 2,4 t

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg Kwsdpferywgzex Ab Tou

Condition: excellent (used), Tool milling machine Manufacturer: Mikron Model: WF 3 DP Three-axis Heidenhain digital readout Tool holder: SK 40 24 spindle speeds: 30 – 2240 rpm Infinitely variable feeds, from 1 – 750 mm/min Table clamping surface: 450 x 800 mm X travel: 500 mm Y travel: 500 mm Kwsdpfexvr Trox Ab Tsu Z travel (vertical): 400 mm Hydraulic tool clamping Space requirements: Width: 1800 mm Depth: 1700 mm Height: 2000 mm (with pallet) Weight: 1800 kg

Condition: excellent (used), MIKRON WF 3 DP universal milling machine TECHNICAL DATA Angular table clamping surface: 450 x 800 mm number of T-slots: 9 T-slot distance: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8,7 kW Milling spindle drive spindle speed: 21 steps Kedpfx Aelnfggjb Tewu speed range: 25 - 2500 /min step jump: 1,258 power of spindle motor: 3,3 / 4,0 kW tool holder: ISO 40 / M16 quill movement, vertical: 110 mm Feed drive Feed rates in all 3 axes: Infinitely variable Feed range: 1 - 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Torque at motor longitudinal + transversal: 4 Nm Vertical: 8 Nm Displacement travel Longitudinal movement of the clamping table (X axis): Automatic: 400 mm Transverse movement of the clamping table (Y axis): Automatic: 400 mm Vertical movement of the clamping table (Z axis): Automatic: 385 mm For the correctness, completeness and topicality of the data we do not take over guarantee

Condition: used, Year of construction: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm total power requirement 2,6 kW Kjdpfx Abeu U Sabo Tswu weight of the machine ca. 1,5t t

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] EQUIPMENT Kjdpfxouhbxao Ab Tewu - 3 axis display HENDENHAIN - steel sheet retention

Condition: used, Year of construction: 1980, x-travel:500 mm y-travel:500 mm z-travel:400 mm turning speed range:30 - 2240 U/min feeds -stepless-:1 - 750 mm/min rapid traverse:1500 mm/min table surface area:400 x 800 mm tool taper:SK 40 Kodpscxxq Dofx Ab Tewu total power requirement:7,8 kW weight of the machine ca.:1.8 t dimensions of the machine ca.:2,1 x 1,6 x 2,2 m

Condition: ready for operation (used), Year of construction: 1997, operating hours: 1,564 h, functionality: fully functional, machine/vehicle number: 7015, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,000 mm Travel Y-axis: 750 mm Travel Z-axis: 750 mm Number of Axes: 4 Distance between vertical spindle and table: 115 mm Max. spindle speed: 24,000 rpm Feed rate: 1,500 mm/min Rapid traverse: 22 m/min Table length: 1,150 mm Table width: 700 mm Turret stations: 60 Tool changer type: TC 30 Number of tools: 30 Kedpfeyhnxcox Ab Tswu Tool diameter: 77 mm Diameter with adjacent empty stations: 115 mm Max. tool length: 305 mm Tool holder: HSK A63 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Connection: 50 Hz 3x 400 V Total power requirement: 40 kW Dimensions & Weight Dimensions (L x W x H): 5,220 x 3,100 x 2,840 mm Machine weight: approx. 10,500 kg Operating Hours Power-on time: 21,859 hours Operating time: 7,308 hours Spindle running time: 1,564 hours EQUIPMENT Through-spindle coolant (IKZ) Chip conveyor Rotary table, 4th axis Set of tool holders, 45 pieces Tool cabinet LISTA

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1033618, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, torque: 600 Nm, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,800 mm, total length: 2,900 mm, total width: 2,600 mm, table width: 500 mm, table length: 700 mm, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 10,871 h, number of slots in tool magazine: 24, mount diameter: 40 mm, tool weight: 6,000 g, MIKRON VCE 600 PRO CNC vertical machining center - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 32 A - Power connection: 16 kW - Tool holder: ISO 40 - Spindle motor power: 12 kW - Torque at 100%: 600 Nm - Tool change time: 6 sec - Chip-to-chip time: 8 sec - Number of slots: 5 - Slot spacing: 100 mm Ksdpfx Aoyiznaeb Towu Note: Without the tool holders shown in the photos! FCA D-73235 Weilheim Teck – loaded onto truck

Condition: ready for operation (used), Year of construction: 2005, x-travel 400 mm y-travel 450 mm z-travel 350 mm Control Heidenhein iTNC 530 68 fach tool adaptor HSK 40E turning speeds 30.000 U/min fixed table - dimensions 300 x 400 mm mm Kodpjxfb E Aefx Ab Towu workpiece weight 200 kg pallet table size 320 x 320 mm feed speeds autom. x/y/z 40 m/min. spindle drive motor 13 kW Number of working hours 32369 h total power requirement 16 kW weight of the machine ca. 7.500 kg High-speed 3-axis universal machining center with 7-station pallet changer. Operating hours: 44,899 hours. Load hours: 32,369 hours. Spindle time since replacement: 13,350 hours. Gantry-style machine with a solid monoblock polymer concrete construction, compact linear ball bearings, Heidenhain direct measuring system, hydraulic power unit for tool and pallet clamping, and digital drives with liquid-cooled Siemens AC servo motors. Accessories: 1 BURN refrigeration unit, 1 Keller L-Cut extraction system (built in 2012), PS 32 setup button, and tool blow-off device. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 107.33.99.047, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 22 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 22 m/min, feed length X-axis: 3,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 3,000 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,500 mm, total length: 3,500 mm, total width: 2,400 mm, table width: 590 mm, table length: 1,000 mm, overall weight: 6,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 36, mount diameter: 40 mm, tool length: 250 mm, tool diameter: 90 mm, Equipment: chip conveyor, MIKRON VCP 800 CNC Vertical Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 80 A - Connection: 40 kW - Max. recommended feed rate: 15 m/min - Max. feed force: 5000 N - Max. tool outreach up to 1000 rpm: 350 mm, up to 4000 rpm: 250 mm, up to 10000 rpm: 200 mm - Max. tool length: 250 mm without taper Kwedpfxoyild No Ab Tju - Tool diameter: 90 mm (fully loaded), 110 mm (partially loaded) - Table with 8 T-slots - Incl. chip conveyor Note: The vises on the clamping surface are not included in the scope of delivery! Important: The item must be picked up on a binding date between 24.03. and 26.03.2026, to be agreed upon. FCA D-73235 Weilheim Teck – loaded onto truck

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 670 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,790 mm, table load: 1,700 kg, overall weight: 8,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 18,500 W, product length (max.): 3,000 mm, number of axes: 3, This 3-axis MIKRON VCE 1200 PRO was manufactured in 2011, featuring a robust vertical machining centre design. It boasts a table size of 1,220 x 620 mm, capable of handling a maximum weight of 1,700 Kg. Equipped with a spindle speed of 10,000 rpm and a motor power of 18.5 Kw, it ensures efficient machining. Tool capacity stands at 40 positions with a max tool diameter of 75 mm. Contact us for more information about this machine. • X/Y/Z rapid traverse: 30 m/min • Tool stations: 40 positions • Max. tool diameter: 75 mm / 127 mm • Max. tool length: 300 mm Technical Specification Taper Size BT 40 Kjdpfxjygw Rre Ab Tswu

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 9,100 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 12,000 W, number of axes: 3, This 3-axis MIKRON VCP 800W Duro was manufactured in 2004. It features a Heidenhain iTNC 530 control system, with X, Y, Z travels of 800 mm, 650 mm, and 500 mm respectively. The machine includes a high-velocity spindle capable of 20,000 rpm and a 30-position tool magazine. Ideal for precision machining, consider the opportunity to buy this MIKRON VCP 800W Duro vertical machining centre. Contact us for more information about this machine. • Tool interface: HSK-A63 • Tool magazine: 30 positions Additional equipment • Chip conveyor Kwjdpfxsyglh Eo Ab Tsu • Complete set of tool holders and tools (as shown in photos) • BILZ ThermoGrip shrink-fit system with CoolDown (induction device for mounting/dismounting tools in shrink-fit holders; manufacturer: BILZ)

Condition: excellent (used), Working travels 800 x 500 x 540 mm Table size 910 x 500 mm Spindle taper SK40 Spindle speeds -10000 rpm Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 Kwsdpfxoq Dlcie Ab Tsu with dividing head Coolant through spindle MARCELS MASCHINEN CH

Condition: excellent (used), Working travels 1600 x 900 x 800 mm Table size 1700 x 850 mm Spindle taper SK40 Spindle speeds -10'000 rpm Tool changer 30 Pos. Control: HEIDENHAIN iTNC530 3D Measuring taper Misc.accessories Kwsdpfsn Hqa Tjx Ab Tju MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2003, functionality: fully functional, coolant tank capacity: 2,000 l, Used, well-maintained transfer machine / rotary indexing table machine / dial-type machine MIKRON MULTISTAR CX 24 Availability: immediately The following modifications have been carried out on the system: Machine: - All motor cables replaced. - All sensor cables replaced. - PLC program adapted to enable and disable collets. - Converted to Knoll coolant system. - Wiring diagram manually modified. - Frequency inverter replaced. - Part selector installed on the machine, including oil pump for oil return. Saw: - Saw control converted to Mitsubishi i-QR control system. - Complete electronics of the saw renewed. - Saw fully mechanically overhauled. Accessories: - 1 x loading station (brass D = 3.9 mm) - 1 x unloading station - 1 x part selector (8-position, see picture) - 1 x lateral drilling unit - 1 x rotary straightening device (fully newly mounted October 2023) - 1 x feed / saw unit (control and inverter overhauled in 2021) - 1 x pneumatic loader (via feed tube) - 1 x chip conveyor with dirty water pump (without chip trolley) - 1 x KNOLL coolant system (2,000 liters) with drum screen filter, wash pump, and vacuum pump, including low-pressure pump (5 bar) and high-pressure pump (60 bar) The machine has been operated with cutting oil. Kjdpsyk Hraefx Ab Towu If you have any questions or require further information, feel free to send us a message or call us.

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Kwsdsykz Tlepfx Ab Tju Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530 i, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 24, MIKRON VCE600PRO machining center with 3+2 axes (on table) X travel 600 Y 450 Z 540 mm, SK40 with 10,000 rpm and ATC 24 tools. Excellent condition. Kwedpfjqi Ufxox Ab Tou