Used Milling Recordings for sale (10,854)

Condition: used, Year of construction: 2012, functionality: fully functional, milling spindle length: 130 mm, height adjustment type: mechanical, table length: 2,070 mm, type of input current: three-phase, spindle diameter: 30 mm, spindle speed (max.): 10,000 rpm, extraction connection diameter: 100 mm, input voltage: 400 V, rotational speed (min.): 3,500 rpm, rotational speed (max.): 10,000 rpm, working length of spindle: 130 mm, Equipment: motor brake, – Year of manufacture: 2012 – Austrian production – Spindle adjustable from 0° to 45° – Sliding table for tenoning operations – CE marking TECHNICAL SPECIFICATIONS: – Spindle diameter: 30 mm – Spindle height: 130 mm – Maximum tool diameter (allows use of large milling tools): 230 mm – Maximum tool diameter at 45°: 125 mm – 4 spindle speeds: 3500 / 6500 / 8000 / 10000 rpm Nsdpfx Ajycqiyef Iokt – Main motor power: 5.5 kW – Electric motor with brake – Table dimensions (L x W): 780 x 970 mm – Sliding table dimensions (L x W): 2070 x 350 mm – "x-Roll" sliding table – Manual height adjustment – Manual angle adjustment: 0° - 45° – Quick-change spindle system – Fence on carriage – Additional table on carriage – Right/left rotation – Extraction port diameters: 100 and 80 mm – Transport dimensions (L/W/H): 220 x 90 x 150 cm – Weight: approx. 350 kg

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface Nkjdpfx Afewwq Hco Iot 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Nkedpfjx Ifdksx Af Iet Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Condition of the machine Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Nsdpfsw Au H Rex Af Iokt Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Electrical connections Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Year of construction: 1997, condition: excellent (used), machine/vehicle number: 1095, Dear Customers Currently we offer you a universal milling machine for the model and mold making of the brand Zimmermann. Here are the technical data of the machine: Work table: 630 x 490 mm Support table: 490 x 400 mm Round movement: 360 ° Nodpfxjxy Ntqo Af Iokt Pivoting: 2x 90 ° Tension groove: 14 x 25 mm Power: 1,1 kW Speeds: 560 - 14,000 rpm Tool holder: ISO30 / SK30 - Motorbrake - motor-driven height adjustment - digital read-out with Heidenhain meassuring system - cabinet Space required: 1,400 x 1,520 x 1,970 mm Weight: 790 kg The machine was cleaned completely including the support table. The technical as well as optical condition of the machine is top! We look forward to your questions and inquiries.

Condition: new, Year of construction: 2025, machine/vehicle number: 306, First commissioning: 2024 Control: Heidenhain TNC 640 including handwheel HR 520 X-axis: approx. 4,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,300 mm A-axis: ± 120° C-axis: ± 360° Clamping table Clamping surface: approx. 4,000 x 2,500 x 213 mm Aluminum with T-slots across every 250mm Max load: 1000kg distributed over the entire surface 2-axis milling head HS673 Spindle power: 22 kW Njdpfx Afjvy Dugj Ijkt Spindle speed: max. 24,000 min-1 Torque: 18 Nm Tool holder: HSK 63A Tool clamping: pneumatic Blowing air / MMS: outside Linear axis drives Feed rate X and Y axis: up to 60 m/min Feed rate Z axis: up to 40 m/min Color Housing, portal, control cabinet: light gray Z slider and milling head: orange Additional equipment - Work area cover - 16-way tool changer - Control in a separate, rollable desk Optional for an additional charge: - Blum laser tool measurement - Renishaw RMP60 radio probe - Heidenhain remote diagnosis Images show identical machine with slightly different equipment!

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Nksdpfx Afjwywcis Ijt Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Nkedpow Rl S Ssfx Af Ist Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: used, Year of construction: 2018, functionality: fully functional, X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ±110° C-axis: ±360° Control unit: Heidenhain TNC 640 with HR 520 handwheel Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with transverse T-slots at 250 mm intervals Max load: 1,000 kg evenly distributed across the entire surface 2-axis milling head ST8 Spindle power: 15 kW Spindle speed: max. 24,000 rpm Torque: 20.9 Nm Tool holder: HSK 63F Tool release: pneumatic Blow air: external Linear axis drives Feed rate X and Y axes: up to 60 m/min Feed rate Z axis: up to 40 m/min Accuracies Positioning accuracy: 0.10 mm Repeatability: 0.05 mm Colour Nedpfoxm Tv Aex Af Iekt Enclosure, gantry, control cabinet: light grey Z-carriage and milling head: blue Additional equipment - 15-position tool changer - Oriented milling spindle (e.g. for thread cutting) - Direct path measuring system on all 5 axes - Double-sided enclosure - Heidenhain TT140 (optional, at extra cost) - Heidenhain TS260 (optional, at extra cost) - 3D machine model (optional, at extra cost) Machine condition Fully functional, immediately available, still under power until November 2025

Condition: refurbished (used), Year of construction: 2025, Dear customers, we are currently offering, upon request/order, a refurbished table router, type FZ0 by F. Zimmermann. Here are the machine's technical specifications: Worktable: 590 x 420 mm Rotary movement: 360° Tilting: 2x90° Spindle power: 0.25 kW Speed: 22,000 rpm Tool holder: collet chuck with clamping nut Ø 8 mm - CE marking - Vernier stop - Plexiglas milling guard - Original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 120 kg Nkodpfx Afsxlzg Hj Iet The machine has been repainted in RAL 7035 light grey, drives have been cleaned, inspected, and equipped with a new belt. With the machine, you will also receive an angle table and a set of milling tools – in other words, a complete setup! VAT is itemized separately on the invoice. Shipping available at an additional charge. Current delivery time: 6 weeks If you have any questions, please feel free to contact us!

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, rotational speed (min.): 1,500 rpm, rotational speed (max.): 9,000 rpm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1997 Control system: Heidenhain Nkedpfxox Iugus Af Iot Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axes drives Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Space required by machine (without control cabinet): approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed in a CE-compliant manner by the buyer. Note: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, they are NOT included as standard equipment with the machine!

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, Initial commissioning: 2005 Overhauled: 2022 Control system: SIEMENS SINUMERIK 840D PL Working area X-axis: 3,000 mm Y-axis: 2,500 mm Z-axis: 1,250 mm A-axis: +/- 100° C-axis: +/- 360° Hours Total machine hours: 110,000 h Total spindle hours: 60,000 h Current spindle hours: 1,900 h (new, February 2024) Clamping table Length x width: 3,000 x 2,500 mm T-slots: 18 H12 T-slot spacing: 250 mm Table load capacity: 5,000 kg/m² Installation: above floor Milling head VH6 Spindle power: 41 kW Spindle speed: max. 10,000 rpm Torque: approx. 200 Nm Tool holder: HSK 100A Axis clamping A & C: 3,000 Nm Drives linear axes Drive technology: linear motor Feed rate X/Y/Z-axis: 40–60 m/min Axis acceleration X/Y/Z: 3–5 m/s² Electrical specifications Voltage: 400 V Frequency: 50 Hz Dimensions & weight Machine space requirement: approx. 7,300 x 6,500 x 5,600 mm Total weight: 60 t Additional equipment - 1x chip conveyor, left - Video camera system for work area monitoring - 40 bar ICS coolant supply with belt filter system - 11 bar external coolant supply, face end - 30-position tool changer, expandable by 20 additional positions Nkodpfsx Npmrsx Af Ist - Renishaw RMP60 / Renishaw touch probe - BLUM tool measurement and tool breakage control

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining is possible in a single setup with a 300 mm long tool (A-axis at 90° swivel). Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table is included in the delivery. However, we are happy to offer a customer-specific solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool release: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Nkedpfx Aexl R Hvsf Ist Drives, linear axes Feed rate X, Y, and Z axis: up to 65 m/min Axis acceleration X, Y, and Z: up to 5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weight Space required machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-fold tool changer - Work area enclosure Optionally available at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Condition of the machine Fully functional, in very good condition. Can be inspected under power until April 2026.

Condition: used, Year of construction: 1979, table longitudinal travel / mm cross travel / mm vertical movement / mm incl. vice Nedpfsuddp Hsx Af Iekt Table dimensions: 1300x400mm The machine is sold without accessories.

Condition: used, Year of construction: 2016, x-travel 6.500 mm y-travel 4.250 mm z-travel 1.500 mm Control HEIDENHAIN iTNC 530 HSCI table-size 7500 x 3000 x 300 mm distance between columns 3.800 mm rapid travel x/y/z 30.000 mm/min tool taper HSK 100 number of spindle speeds 6.000 U/min/rpm transmission ratio 2 Motor output 37 kW Number of working hours 28.475 h Spindle hours 12.629 h Tools changer 60 fach/tools Internal cooling system 36 bar Chip coveyor Doppel Nodpfsxb Ed Uox Af Iokt milling head 5-Achs-Fräskopf OAD total power requirement 80 kWA weight of the machine ca. 85 t

Condition: new, Year of construction: 2025, Cutting mills PC52120R 75 kW in stock Rotor diameter (mm): 520 Rotor width (mm): 1200 Drive (kW): 75 Njdmgsydclvot R Ntscl Rotor knife rows: 10 Stator knife rows: 6 Weight (kg): 5200 Nksdpfxeydcmmj Af Iot

Condition: new, Year of construction: 2025, Cutting Mill PC52120R 75 kW in stock Rotor diameter (mm): 520 Rotor width (mm): 1200 Drive (kW): 75 Rotor knives (rows): 10 Stator knives (rows): 6 Nedpfjydclvox Af Iekt Weight (kg): 5200

Condition: good (used), Year of construction: 1981, Manual height and swivel adjustment of the milling spindle Control panel positioned on top Table size approx. 1100 x 760 mm Table height approx. 865 mm Motor power 4.7/5.7 kW Spindle speeds 3000/4500 / 6000/ 9000 rpm Height adjustment approx. 150 mm Space requirement approx. 1300 x 1100 mm Weight approx. 850 kg Further technical details on request All data taken from a brochure, therefore all information is provided without guarantee. Nksdpfxeycczzs Af Ist

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Model: UWF 902 S Nkodpfev Rxa Sjx Af Ijt Year of manufacture: 1995 Operating hours: 65,071 Control system: HEIDENHAIN TNC 426 Working range X/Y/Z: 600 x 450 x 500 mm Spindle speed range: 20 - 6,300 rpm Tool holder: SK 40 M & H 3D probe (for workpiece measurement) Vertical-horizontal milling device Quill Coolant system Angle table: 900 x 458 mm Weight: 4,000 kg Machine dimensions LxWxH approx.: 3,900 x 2,000 x 2,000 mm ä21126

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Swivel table: 900 x 458 mm Renishaw 3D probe Speed range: 20 to 6,300 rpm Tool holder: SK 40 Nedpfov Rpr Sex Af Ijkt Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, empty load weight: 45,000 kg, total length: 11,055 mm, total width: 6,320 mm, total height: 4,140 mm, Type: DMC-4100LH Nedpfx Afexp Sk Dj Ijkt 2800 mm tussen de kolommen!! MA-25 2-assige universele freeskop - 20 kW - 6000 tpm C-bereik: 0-360° Bereik A-as: +/- 110° Koeling door spindel 40 bar Totaal vermogen: 67 kW Geen fundering nodig! De Johnford DMC-serie dubbelkoloms brugfrees met bewegende tafel is gemaakt van een eendelige Meehanite gietijzeren brug/kolomconstructie die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met een C-frame. De brugfrees is verkrijgbaar in versies met zowel een bewegende tafel als een schuifkolom (vaste tafel), variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De brugfreesmachines hebben een lange basis met volledige ondersteuning van de tafel over de volledige 130 cm Y-asverplaatsing, waardoor zware lasten kunnen worden bewerkt. De Y- en Z-as dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt, wat zorgt voor een nauwkeurige bewerking met nauwe toleranties tijdens bewerkingen met hoge snelheid. Omdat er geen tafeloverhang is, worden de helling en gierhoek van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat zorgt voor extra stijfheid. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange standtijd en een optimale oppervlakteafwerking. De combinatie van dubbele schroeftransporteurs en een rupsband zorgt voor volledige spaanafvoer met minimale handmatige reiniging. Daarnaast wordt eindige-elementenanalyse (FEA) gebruikt bij het ontwerpen van elke brugfrees, waarbij de effecten van realistische omstandigheden, zoals trillingen, hitte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm

Condition: used, x-axis / mm y-axis / mm z-axis / mm The boring mill is sold without clamping plates – the price refers exclusively to the boring mill. Technical data Horizontal milling and drilling machine with support sleeve Working range Vertical adjustment of the headstock from the clamping surface: 0 - 3000 mm Horizontal adjustment of the column: 7000 mm Maximum drilling depth with drill spindle alone: 1200 mm Maximum drilling depth with drill spindle and support sleeve together: 1300 mm Drill spindle diameter: 150 mm Milling spindle diameter: 240 mm Support sleeve diameter: 390 mm Support sleeve extension: 700 mm Drill spindle tool holder: ISO 50 Maximum workpiece weight: 70,000 kg When placed in 4 prisms: 95,000 kg Main drive Total speed range, adjustable from 2 - 795 rpm Series 1 2 - 50.4 rpm Series 2 50.4 - 126 rpm Series 3 126 - 314 rpm Series 4 314 - 795 rpm Maximum drive power at rated speed 17.5 80 kW Quick adjustment speed of spindle box and column 1800 mm/min Rapid adjustment speed of drill spindle and support sleeve 1400 mm/min Fine adjustment speed of spindle box and column medium 75 mm/min Fine 3 mm/min Fine adjustment speed of drill spindle and support sleeve Medium 57.7 mm/min Fine 2.5 mm/min Feed of headstock and column for milling Row 1 3 - 75 mm/min Row 2 72 - 1800 mm/min Feed of drill spindle for drilling Row 1 0.19 - 4.7 mm/min Row 2 2.2 - 56 mm/min Row 3 56 - 1400 mm/min Special equipment Numerical length measuring device in horizontal and vertical directions Accuracy 0.01 mm Rotatable and movable clamping table, Collet & Engelhard, Offenbach Model Tdvmf 1.6 (for technical data, see ‘Clamping table’) Rotatable and movable clamping table from Scharmann, Rheydt Model DAV 1600 Nksdpexdnrasfx Af Iet Rotatable and movable clamping table from Froriep, Rheydt Swivel crane for tool change, maximum load capacity 500 kg Special tools Carbide core drill bits for extracting core samples Universal facing and boring head from Wohlhaupter, Frickenhausen Model UPA7, with the following specifications: 1 division of the fine adjustment 0.01 mm in diameter 1 revolution of the fine adjustment 0.5 mm in diameter Facing and boring range 0 - 1250 mm Maximum slide adjustment 210 mm Automatic slide feed in mm/rev during facing 0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 - Quick adjustment per revolution of the quick adjustment spindle 6 mm in diameter Largest diameter of the slide at zero position corresponds to the smallest drilling diameter of 323 mm Head height without shaft 260 mm

Condition: used, Flexible milling cell with 6-axis industrial robot ABB - CARAT type IRC5 / IRB 2400 M2004 Robotic milling system with rotary shuttle table featuring 2 workstations, robot cell Serial No. 24-51541 Year of manufacture: 2006 6-axis industrial robot ABB Type IRB 2400/16 M2000 Control system: ABB Type IRC5 with tech-in panel HF milling spindle PERSKE Type KRS 35.3-2, power 1.2 kW, rotational speed 17,400 to 23,200 rpm Robot handling capacity: 16 kg Robot net weight: 380 kg Power supply: 400 VAC, 50 Hz - High-frequency spindle equipped with collet chuck - The complete plant is configured as a compact milling cell with shuttle table. - Control cabinet and robot control unit compactly and solidly installed on the milling cell - Servo-driven rotary table, rotation angle 180°, with partition and two clamping surfaces for fixtures - One side of the rotary table can be loaded with new workpieces in parallel to the milling cycle Milling cell weight: approx. 4000 kg Very good condition Nedpfx Aoyaq Nuof Iokt The milling cell was used as a machining center for milling operations on aluminum sheets and ALU deep-drawn parts. Edge processing, milling of cutouts, drilling, etc. Also suitable for machining plastics or similar materials. If interested, please request a video from us.

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Nodpfev Ai N Uex Af Ijkt Storage location: Nattheim

Condition: used, Year of construction: 2015, x-travel 4.000 mm y-travel 2.100 mm z-travel 1.000 mm taper ISO ISO 50 Number of revolutions 5.000 rpm table-size 4.020x2.010 mm table weight 12.000 Kg Control Heidenhein iTNC530 Nodpfxeyb S Eae Af Iskt Tools place 32 fach rapid taverse 15.000 mm/min weight of the machine ca. 39 t dimensions of the machine ca. 10680x5600x5100 m