Used Mitre for sale (3,419)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0721040674, saw blade diameter: 380 mm, Mitre saw elumatec MGS 72/10 for cutting aluminum profiles Pivoting range from 0° - 45°, continuously adjustable to the left and to the right Dedpfxeyxgyne Al Uskn Positive location points at 15°, 30°, and 45° Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Length 780 mm, depth 900 mm, height 815 mm, weight 120 kg Stable, ground, continuous support table with turn table on precision bearings Wear-resistant and quiet multi-V belt drive Manual saw feed Pneumatic material clamping unit Pulsed coolant system The machine is ready fro operation

Year of construction: 1999, condition: used, Angle display: digital Length stop flap measurement display: digital Dkjdpfx Aloy A Hike Uen

Year of construction: 2008, condition: ready for operation (used), A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible. Dkjdsy Nm Umopfx Al Ujn

Year of construction: 1980, condition: good (used), ULMIA mitre-saw 1630 Djdpfjd Ddgpjx Al Uokn Blade dimensions Ø of 300 mm Speed range 95-3000 rpm Overall performance 1,1 kW Masch. Weight 270 kg Dimensions (W x D x H) 0.9 x 0.73 x

Condition: excellent (used), Sprossen Punching Machine 12 mm used, in excellent condition Brand: Jeyden Sprossen blade 12 mm Dkjdpfjyza Anex Al Uen Right-hand support table with adjustable stop Space requirement approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Storage location: 54634 Bitburg, loaded free onto transport, unpacked Sold as seen in current condition, without warranty or guarantee

Condition: good (used), Year of construction: 1996, cutting range min. 250 - 2200 mm saw blade diameter 250 x 20 mm cutting range 50 x 70 mm mitter cutting - all-position 90 u 45 ° Dedpoy Aa R Iofx Al Uokn total power requirement 2 x 1,1 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 2,94 x 1,15 x 1,22 m Including positioning control Including electronic measuring rod We connected the machine, but unfortunately couldn't operate it because we are unfamiliar with it. The hoses should be replaced because air is leaking from some of them. Feel free to come by and take a look in person.

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0733336662, Mitre saw elumatec MGS 73/33 Versatile for use with aluminium and PVC profiles Stable, ground, continuous support table with turn table on precision bearings Wear-resistant and quiet multi-V belt drive Hydro-pneumatic saw feed 2-hand operation Pneumatic profile clamping (2x horizontal, 1x vertical) Pulsed coolant system Pivoting range from 0° - 45°, continuously adjustable to the left and to the right Positive location points at 15°, 30°, and 45° Saw blade diameter 380 mm Djdpfx Alsy Nncrs Ujkn Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Compressed air supply 7 bar Length 850 mm, depth 900 mm, height 1,450 mm, weight 220 kg Machine is ready for operation

Condition: used, functionality: fully functional, OMGA TR2A Double Mitre Saw for Wood and Aluminium – after technical inspection, ready for operation Dkjdpfx Aley Rh Dre Uon Specification: • Technical condition: used, after comprehensive maintenance • Manufacturer: OMGA • Model: TR2A • Main motors: 2 x 1.65 kW (3,000 rpm) • Pneumatic head control • Max. cutting length: 312 cm • Min. cutting length: 10 cm • Max. cross-section at 90°: 80x145 mm • Max. blade diameter: 300 mm • Mitre cutting range: -45° to +45° (right, left) • 3 working modes • Vertical workpiece clamps • Extraction ports: 80 mm diameter • Weight: approx. 500 kg • Overall dimensions: 436 x 115 x 125 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The photos provided show the actual condition of the item for sale • Inspection and functional testing possible on-site • The listed price excludes VAT and transport costs Financing and transport: • Transport can be arranged via our own MDD fleet, couriers, or external carriers • Financing support available in the form of leasing or lease loans

Condition: excellent (used), Fezer Crosscut and Mitre Saw The powerful solution for workshop and construction site for cutting wood, aluminium, and plastics Type: KG 25 AC motor 220 Volt, 0.85 kW 2800 rpm Dkedpsyxx Evsfx Al Usn Indexing for mitre cuts Any intermediate position can be locked by clamping screw. For 250 mm saw blade Weight: approx. 24 kg Cutting capacity at 90 degrees: H = 50 mm / W = 120 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2003, used, good condition Machine cleaned, lubricated, partially overhauled. Djdpfoyclxpox Al Uskn Various wear parts replaced. Test run with settings. Manufacturer: Rapid Model: DGS 200 Year of manufacture: 2003 Machine no.: 404 CE type-tested Motors: 2 x 2.2 kW Cutting width: 4000 mm Cutting depth: 130 x 140 - 100 x 230 - 60 x 270 mm Cutting height max.: 280 x 50 mm Max. blade diameter: 420 mm Manual tilt: 45° Linear feed: pneumatic Digital displays for cutting length 4x pneumatic workpiece clamping - 2x horizontal, 2x vertical Cylinders: 2 horizontal, 2 vertical Space requirement approx. 5100 mm x 1180 mm x 1280 mm Weight approx. 800 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 1982, An Elumatec double mitre saw for aluminium and plastic profiles, including E200 positioning unit, is available. Saw head swivel: 45°, saw blade diameter: 380mm, speed: 2800rpm, max. cutting capacity: 195mm/120mm, min. cutting length: 520mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Dksdpsy Hk Thsfx Al Ujn

Year of construction: 2000, condition: used, machine/vehicle number: 97464, cutting length: min./max. bei 90° 330/5000 mm Dkedpj Uir Ejfx Al Usn disk of circular saw-Ø: 450/500 mm min. cutting length at 90°: 330 mm space needed: 6760 x 1590 x 1700 mm weight: 1550 kg

Condition: used, machine/vehicle number: 8354, disk of circular saw-Ø: 350 mm cutting area at 90° round: 90 mm cutting area at 90° square: 160 x 70 mm cutting area in mitre at 45° square: 120 x 60 / 60 x 80 mm cutting speed: 30 m/min Dsdpeby Hikofx Al Uekn engine: 1,1 kW space needed: 1000 x 1250 x 1380 mm

Year of construction: 1992, condition: used, machine/vehicle number: 7375, cutting length: 5000 mm Dedpfsz E Snox Al Ujkn disk of circular saw-Ø: je nach Bedarf 420 - 500 mm space needed: 6400 x 1400 x 1700 mm weight: ca. 1600 kg

Year of construction: 2005, condition: good (used), I sell the double mitre saw OMGA TRF 527, year 2005. Cutting length 390 - 2800mm Djdeg Tumcopfx Al Uokn Cutting width max. 170mm Cutting height max. 90mm Tilting heads 0 + - 45° 2 Horizontal + 2 Vertical pneumatic Material pressures 2 Motors x 1,62kW (2,2 HP) Good condition. Available immediately.

Condition: used, Transport 350 EUR Dkjdpfjwna Rxjx Al Uon

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 90 kg Dksdpfxsvz Hvvs Al Ujn Total power requirement 0 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 90 kg Total power requirement 0 kw Dkjdpfx Alsvz Hvij Usn

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 90 kg Dkedpfx Alovz Hvpo Uon Total power requirement 0 kw

Condition: like new (used), functionality: fully functional, MITRE SAW , orientable +/-45° model OMGA T50 350 with dust aspirator second hand machine working conditions : Excellent CE regulation : Yes with extractor cabinet ( dust aspirator ) with flat diagram extensions Technical data : volt. 380/50 engine power Hp 3 ( kw 2,2) blade diameter mm. 350 with 90° blade : max height cut mm. 110 width max. cut mm. 130 with 45° blade : Dkodpfom Ak Elex Al Usn max. height cut mm. 110 max. width cut mm. 92 machine weight kg. 90 extractor cabinet weight kg. 50

Condition: used, Year of construction: 2020, Technical details: Dodpfsym Ukcjx Al Uekn cutting diameter: 250 mm cutting range min.: 110 mm saw blade diameter: 3100 x 27x 0,9 mm square: 220 mm flat: 275x170 mm cutting speed: 37/74 m/min total power requirement: 1,1/1,5 kW weight of the machine ca.: ca. 500 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4150x1200x1650 mm Weight 450 kg Dkedpfx Alsvz Ezws Uon Total power requirement 1,5 kw

Condition: good (used), Year of construction: 1998, Cutting length 6000 mm Saw blade diameter 500 mm Mitre cuts swivelled from 22.5° outward to 45° inward Two-hand operation Dedpjyz Il Rofx Al Uekn with intermittent spray device

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Electronic X-axis control X-axis positioning speed (m/min) 25 Pneumatic head tilting External tilting 45° / 22° Mechanical adjustment of intermediate angles Hydropneumatic blade feed Usable cutting length (mm) 5,000 Minimum standard cut with 2 heads at 90° (mm) 310 Blade diameter (mm) 450 Dksdpfxsyv Ag Se Al Uen Contact probe

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever Dksdpsquzd Rofx Al Uen - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition