Used Mitre Saw Machine for sale (68,368)

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020469, Mitre Saw Machine AKS 134/00 1 x Saw Blade Ø550mm 1 x Saw Blade Ø500mm Equipped with digital angle setting readout Codpfx Akox A D Ihetjhd

Condition: good (used), Year of construction: 1999, machine/vehicle number: 6410/102/051, Offer 25325 Technical Data: - Cutting capacity at 90° - round: 320 mm - flat: Width 500 x Height 300 mm - Mitre adjustment – right & left up to 60° - Cutting capacity at 45° – left & right: 320 mm - flat: 304 x 300 mm - Material support height approx. 750 mm - Saw blade dimensions: 5090 x 34 x 1.1 mm - Cutting speed infinitely adjustable: 17 to 90 m/min - Cutting pressure infinitely adjustable: 0 – 10 m/min - Total drive power: 400 V / 4.0 kW - Motorised chip removal brush - Hydraulic lifting/lowering of the saw frame Chedpfx Aksxph E Rsted - Hydraulically operated movable workpiece vice - Hydraulic mitre adjustment with digital angle display - Swarf conveyor - Motorised infeed roller conveyor KASTO, 10 m - Outfeed roller conveyor KASTO with length stop, 6 m - Required space approx.: W 1300 x H 1400 x D 3100 mm - Machine weight approx.: 1800 kg - Roller conveyor weight approx.: 3500 kg

Condition: good (used), Year of construction: 2001, machine/vehicle number: 104 912 6952, Offer 26342 Technical data: - Saw blade diameter 420 mm - Saw blade bore 30 mm - Max. cutting length 6000 mm - Smallest cutting length at 90° + 45° 335 mm - Cutting range, see diagram attached - Swivel range inwards, pneumatic 90° - 22.5° - Tilt range inwards, pneumatic 90° - 45° - Saw blade speed 2800 rpm - Drive 400 V / 2 x 4000 Watts Chede Aa I A Ujpfx Aktsd - Compressed air connection 7 bar - Air consumption per working cycle - without spraying approx. 40 l - with spraying approx. 64 l - Space requirement approx. W 7500 x H 1600 x D 1600 mm - Weight approx. 1800 kg - including: - manual cutting length adjustment with digital display, - swiveling and tilting saw head for high and wide profiles, - also allows for alternating cuts, 22.5° inwards swivel, - digital degree display - separate control cabinet, - cycle spray device

Condition: good (used), Year of construction: 1998, machine/vehicle number: 6023, Offer 18184 Technical data: - Saw blade diameter up to approx. 400 mm Chsdpfezrvfwsx Akted - Saw blade speed 2800 rpm - Cutting range approx.: - at 90° circular 140 mm - or rectangular 170 x 140 mm - Miter adjustable to the left and right 45 - 90 - 30° - Pneumatic saw blade feed - Pneumatic quick-release clamp - Pneumatic connection - Original machine base - Infeed roller conveyor 3000 mm - Outfeed roller conveyor with measuring stop 6000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 650 x H 1550 x D 1000 mm - Machine weight approx. 150 kg

Condition: new, Year of construction: 2026, functionality: fully functional, New double miter band saw machine, equipped with a frequency converter. Codpfx Akezu Db Eetehd Suitable for cutting various materials.

Condition: used, Machines for export from company closure Stock No. 62506 = RAPID Type DGL 5000 / 500 double mitre saw = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 54183 = MÜLLER hydraulic press 10 ton, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Chjdpfey Erzdjx Aktod Stock No. 57780 = MÜLLER hydraulic press Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic press – separate hydraulic power unit = Weight approx. 3,000 kg Stock No. 60507 = WEBO drill with 4 spindles = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL drill with 2 spindles = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = WEBO column-type drill MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO radial drilling machine Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines in stock, available for immediate export. For example: 10 units welding machines, CLOOS, ESS etc. 2x HITACHI SEIKI CNC lathes

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Cutting range at 90° round: Ø 115 mm Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Chedpozrpl Djfx Aktsd Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Vise opening: max. 185 mm Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Mains connection: 400 Volt, 50 Hz Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw - feed stroke programmable up to 9999 mm - 2 gear stages and 2 motor speeds - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: AY11051, functionality: fully functional, cutting height (max.): 330 mm, overall weight: 1,500 kg, saw band length: 5,385 mm, saw band width: 100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS SAWING AREA Sawing direction: Vertical. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sawing direction: Vertical Cut to feed roller: max. 230 mm Cut to stop: max. 260 mm Cut width to column: max. 300 mm Total opening: max. 480 mm Cutting height: max. 330 mm Saw band width: max. 100 mm Saw band length: min. 5,385 mm Saw band length: max. 5,485 mm Saw band thickness: min. 0.8 mm Saw band thickness: max. 1 mm Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS & WEIGHT Dimensions (L x W x H): 2,000 x 950 x 2,400 mm Weight: 1,500 kg EQUIPMENT CE marking Max. cut to feed roller: 230 mm Max. cut to stop: 260 mm Max. cut width to column: 300 mm Max. total opening: 480 mm Max. cutting height: 330 mm SAW BAND Max. saw band width: 100 mm Cjdo Af Hk Uspfx Aktohd Min. saw band length: 5,385 mm Max. saw band length: 5,485 mm Min. saw band thickness: 0.8 mm Max. saw band thickness: 1 mm TABLE AND WHEELS Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm FEEDING AND DUST EXTRACTION Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS GENERAL Year of manufacture: 2002 Color: Blue Serial number: AY11051 CE marking: Yes ELECTRICS AND DRIVE Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS AND WEIGHT Overall length: 2,000 mm Overall width: 950 mm Overall height: 2,400 mm Weight: 1,500 kg

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: ST001, functionality: fully functional, power: 18.4 kW (25.02 HP), overall weight: 9,500 kg, saw band length: 11,760 mm, saw band width: 67 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Circular sawing capacity: 1,050 mm Saw band length: 11,760 mm Saw band width: 67 mm Saw band thickness: 1.6 mm Workpiece clamping: Hydraulic MACHINE DETAILS Control system: Conventional Power: 18.4 kW Dimensions & Weight Dimensions (L x W x H): 12,000 x 2,450 x 2,000 mm Unladen weight: 9,500 kg Number of transport packages: 2 EQUIPMENT CE marking Cedpfxe Af Hd Ie Aktshd 6-meter roller conveyor

Condition: like new (used), Year of construction: 2022, Used HMZ-3 FR CNC miter saw with routing unit The miter line consists of: - a miter saw with a 5.5 KW braked motor and a 700 mm saw blade; - an infeed roller conveyor with a working length of 6,500 mm and a pusher unit; - an outfeed roller conveyor with a length of 6,000 mm; - an industrial computer with a 17” LCD color screen; - computer-controlled axes; - optimization software for importing Tekla/HSB CAD files, etc. Saw machine specifications: - motor power 5.5 KW; - saw blade diameter 700 mm, saw height 250 mm; - angle adjustment from 0 to 270 degrees; - noise level 81 dB; - combined guard/sound hood over the entire saw; - 2 dust extraction ports; - pneumatic material guiding system for the saw; - centerline adjustment 200 mm Infeed conveyor specifications: - robust steel construction. - working length 6,500 mm (- rollers with a diameter of approximately 50 mm and a load-bearing capacity of 125 kg each). - adjustable feet, 100 mm adjustment range. Outfeed conveyor specifications: - robust steel construction. - approximately 6,000 mm long. - equipped with an automatic scrap chute. Automatic positioning unit specifications: Cjdpozg Il Ssfx Aktshd - reading accuracy selectable: 1 or 0.1 mm. - positioning accuracy plus or minus 0.2 mm. - speed up to 80 m/min. - Servo motor with rack and pinion, driven by a frequency inverter. - steel guide with 8 adjustable bearings. Computer specifications: - Industrial computer with a 19” LCD touchscreen. - hard drive 200 Gb, and USB port. - network card and Windows 10. - special, H&M-developed, Dutch-language Windows software. - graphical display of the cutting pattern. - control from the office via a network or by importing a drawing program, e.g., HSB CAD. - integrated optimization module. Operation: A cutting list is created or called up on the control computer and activated. Then, the available lengths and quantities can be specified, so that the machine can optimize the cutting process. After that, the saw can be started, and the machine requests the desired length. The pusher is in the starting position, and the control system requests the correct length. After a start command is given, the pusher starts and the beam is pushed through the machine and automatically cut to the desired specifications. The cut product ends up on the outfeed table. Additional options on the machine: - Label printer with software and stand. - Supports for the saw (8 pieces). Routing unit The saw is combined with a routing unit with a 90-degree (vertical) stroke. Max. reach: - 150mm. Height - 120mm. Depth Dust extraction port for routing unit: 100mm.

Condition: ready for operation (used), Double mitre saw from Haffner, type 189, immediately available. Technical data: Saw blade diameter 330 mm, max saws distance at 90°: 3,330 mm, cutting height at 90°: 90 mm, cutting width: 220 mm, cutting height at 45°: 40 mm, min saws distance at 90°: 360 mm. Saw blades tiltable up to 45°, intermediate support, saw units swiveling, saw blades tiltable, pneumatic clamps, top-cutting design, manual width adjustment. Weight approx. 380 kg. Required space: length 1.2 m, width 3.8 m. The machine is in excellent technical condition and can be inspected at any time. Nationwide delivery by freight forwarder possible. For questions, simply call or write. Maschinenhandel Nord, Gerstenstraße 2, 17034 Neubrandenburg. All prices net plus VAT – subject to errors. Csdpfoxk Tvksx Aktjhd

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Offer – Double Mitre Saw Emmegi Norma 400 We are pleased to offer you the Emmegi Norma 400 double mitre saw – a precise and reliable machine for professional cutting of aluminium and PVC profiles. Technical Data: Codpfx Aow R T Tqektehd - Saw blade diameter: Ø 400 mm - Cutting length: up to approx. 4,000 mm, minimum length approx. 485 mm - Saw head swivel range: ± 45° (inwards/outwards) - Drive: Hydropneumatic feed, motor power 2.2 kW per head, braking time approx. 10 s - Workpiece clamping: Pneumatic, horizontal and vertical, with 'low pressure' safety feature - Cooling: Oil-water micro-mist system

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, For sale: Fenstek ADS550×5000 CNC-controlled double-head cutting saw from 2019 for the precise cutting of aluminum profiles. The machine is suitable for series production of profiles for windows, doors and facade systems. The two saw heads can operate independently or synchronously. The moving saw head is automatically positioned via a servo system. Key benefits: - Fully CNC-controlled - Two saw heads operating independently or synchronously - Automatic servo positioning of the moving saw head - Automatic height measurement system for precise cuts below 45° - Touchscreen operation - Integrated label printer for product identification and traceability - Infinitely adjustable saw feed - Heavy and stable machine bed Technical specifications: - Power supply: 380–420 V / 50 Hz - Total power: 5.5 kW - Saw motors: 2 × 2.2 kW - Saw blade diameter: 550 mm - Maximum cutting length: 5,000 mm - Minimum cutting length at 90°: 360 mm - Cutting angles: 45° and 90° - Repeat accuracy: ±0.1 mm Cjdpfx Aksx R U Epotohd - Air consumption: 60 l/min at 0.5–0.8 MPa A complete double-head cutting saw for companies that want to process aluminum profiles quickly, reproducibly and accurately.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, cutting range round steel at 45°: 450 mm, cutting range round steel at 90°: 450 mm, cutting range square steel at 45°: 420 mm, cutting range square steel at 90°: 450 mm, saw band length: 5,780 mm, saw band width: 41 mm, Semi-automatic sawing machine with 1-sided miter. (Also available with 2-sided miter.) Hydraulically operated material clamp. Hydraulically operated saw frame. Brand: KMS Type: KMY DG 450 Saw motor: 3 kW Height of support table: 888 mm Max / Min clamp opening: 0 / 740 mm Clamp height: 240 mm Mitre: 1 side Down speed: Continuously adjustable Cutting speed: Continuously adjustable, 20 - 90 m/min Band dimensions: 5780 x 41 x 1.3 mm Weight: ± 1600 kg Capacity: 90° (right angle): Round: Ø 450 mm Square: 450 x 450 mm Rectangle: 450 x 680 mm 60°: Round: Ø 450 mm Square: 450 x 450 mm Chodpjvy Swiofx Aktjd Rectangle: 450 x 570 mm 45°: Round: Ø 450 mm Square: 420 x 420 mm Rectangle: 350 x 480 mm 30°: Round: Ø 350 mm Square: 330 x 330 mm Rectangle: 240 x 450 mm Incl. 2 short roller tracks. (not shown)

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 -WKG 972 On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Technical data: Saw blade diameter: 300 mm Clamping angle: 20 ° Lateral displacement: 73 mm Chodpfx Akjurkypjtjd Power supply / connected load: 380 Volt 50 HZ Factory No.: 30769 Rated current: 2 A

Condition: used, Year of construction: 2011, functionality: fully functional, working width: 1,015 mm, cutting height (max.): 310 mm, cutting width (max.): 1,015 mm, FICEP KATANA K100 + K60 - TWO REFURBISHED STRUCTURAL-STEEL BAND SAWS | BUNDLE OFFER Two automatic Ficep mitre band saws of the Katana series: the K100 (year 2011, profiles up to approx. 1000 mm) and the smaller K60 (profiles up to approx. 600 mm). Both designed for economical cutting of solid material, profiles and tubes in steel and non-ferrous metals. AVAILABLE INDIVIDUALLY OR AS A PACKAGE. CONDITION & REFURBISHMENT Both machines have been overhauled and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies per machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machines reconditioned - no demonstration under power). Chsdpfx Akewd Ugtotjd FUNCTION & APPLICATION Automatic mitre band saws for profile processing in structural steelwork: beam, tube and flat material as well as solid material in steel, aluminium and non-ferrous metals. Motorised feed with infinitely variable cutting speed, hydraulic clamping systems, CNC-controlled mitre cuts and cutting programs. The K60 is additionally prepared for the DSTV data interface (import from CAD/CAM). Applications: steel fabrication shops, steel and semi-finished trading, industrial pre-fabrication. --- MACHINE 1: FICEP KATANA K100 (YEAR 2011) --- Horizontal CNC mitre band saw for large structural-steel cross-sections. Hydraulic blade tensioning, dual automatically pre-settable blade guidance, integrated cooling/lubrication. - Year: 2011 | Serial number: 33111 - Cutting width at 90 deg: 1015 mm | Cutting height at 90 deg: 310 mm - Min. profile size at 90 deg: 60 x 10 mm - Cutting width at +/-45 deg: 610 mm | Cutting height at +/-45 deg: 310 mm - Max. mitre angle: +/-60 deg - Saw blade: 7880 x 41 x 1.3 mm | Blade speed: 60-170 m/min - Blade motor: 9 kW | Control: Ficep CNC - Hydraulic blade tensioning, dual blade guidance (fixed/mobile side) - Synchronised cleaning brush, integrated cooling/lubrication system - Hold-downs and workpiece vices: hydraulic, independent --- MACHINE 2: FICEP KATANA K60 --- Horizontal CNC double-mitre band saw for medium cross-sections. Hydraulic horizontal and vertical clamping, minimum-quantity lubrication, Mitrol CNC with Pegaso software. - Year and serial number: on request (to be confirmed on the name plate) - Cutting range at 90 deg: 610 x 310 mm - Cutting range at 45 deg: 400 x 300 mm | at 60 deg: 250 x 250 mm - Mitre angle range: +45 / -60 deg | Min. profile height: 60 mm - Saw blade: 34 x 1.1 x 6350 mm - Blade motor: 7 kW | Control: Mitrol CNC, Pegaso software - Data interface: DSTV | Remote diagnostics via network - Hydraulic horizontal/vertical clamping, minimum-quantity lubrication (MQL) - Operating mode: standalone or as combined line with drill unit Machine weights and dimensions for both machines follow on request. LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further Ficep machines on request. CONTACT / INQUIRY Price on request - individually or as a bundle | Viewing by arrangement. Sale exclusively to commercial customers (B2B).

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, saw blade diameter: 810 mm, tooth pitch: 100 mm, grinding wheel diameter: 125 mm, overall weight: 930 kg, outer diameter: 810 mm, We are offering this ready-to-use Volmer CHC 025 saw blade grinding machine, manufactured in 1995. This machine is specifically designed for the precise grinding of the front and rear faces of carbide circular saw blades ranging from 80 to 810 mm. Cjdpfxez R Srwj Aktohd If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Sharpening machine for band saw blades, manufactured by a very small business. Codpfx Aj Ahq Tgjktjhd Grinding wheel diameter: 250 mm. Electrically controlled.

Condition: used, total height: 3,270 mm, total length: 2,700 mm, total width: 2,250 mm, Colour: Green Weight: 4.000 kg Price: On request - Serial number: U5624 - Saw direction: Horizontal - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1200 - Max. cutting to feed roller opening [mm]: 450 - Max. cutting to stop opening [mm]: 330 - Max. cutting height [mm]: 320 - Table width [mm]: 1000 - Table length [mm]: 1150 - Max. band saw width [mm]: 130 - Feed roller type: Automatic hydraulic - Voltage [V]: 400 - Current consumption [A]: 46.5 - Fuse [A]: 63 - Power [kW]: 22.0 - Transport dimensions: 2700mm x 2250mm x 3270mm (l x w x h) Cedpfez Rz E Sjx Aktohd - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, JWV service is proud to present the new Carif 260 Auto. This fully automatic and compact bandsaw machine is manufactured in Italy using European components. Csdpezlf Dcofx Aktshd As the importer, we can arrange a demonstration of the machine at your location.

Condition: new, Year of construction: 2026, CORMAK G5025 Metal Band Saw – Precision Cutting of Steel, Pipes and Profiles The CORMAK G5025 metal band saw is a professional cutting machine designed for precise cutting of pipes, profiles, bars, and components made from various grades of steel. Its robust construction, hydraulic saw arm descent adjustment, and two blade speeds make it an excellent choice for both individual and series production. The CORMAK G5025 allows straight and angled cutting thanks to its bi-directional swivelling saw arm. Its stable construction and precision blade guiding system ensure high cutting repeatability and comfortable operation. Main Advantages of the CORMAK G5025 Band Saw Chedpfei D Ddiox Aktjd - Two blade speeds – 36 and 72 m/min – allow cutting parameters to be adjusted to the type of material being processed. - Hydraulic, stepless saw arm descent adjustment – enables precise control of the feed rate during cutting. - Robust profiled cast iron saw arm – provides high structural rigidity and minimises vibrations. - Bearing and carbide blade guides – ensure stable and accurate guidance of the cutting blade. - Bi-directional swivelling saw arm – enables mitre cutting at angles ranging from -45° to +60°. - Cooling system – an electric pump and coolant collection tray help effectively remove heat and contaminants from the cutting area. - Automatic drive shut-off after cutting – increases operational safety and convenience. - Protective guards and safety microswitches – enhance operator protection during operation. Band Saw Construction and Technology Rigid Cast Iron Saw Arm The saw arm is manufactured from profiled cast iron. Its high structural rigidity reduces vibrations generated during cutting and helps maintain accurate cutting geometry. Cutting Blade Drive System Power is transmitted from the electric motor through a worm gearbox to the blade drive wheel. This solution ensures stable operation and efficient torque transmission when cutting steel components. Precision Blade Guidance and Tensioning The blade is guided by adjustable bearing and carbide guides. The mechanical, manually operated blade tensioning system allows the blade to be properly prepared for operation and ensures correct blade tension. Hydraulic Saw Arm Descent Adjustment The stepless hydraulic adjustment system enables precise control of the saw arm descent speed according to the type, shape, and cross-section of the material being cut. This ensures smoother cutting and helps prevent excessive blade loading. Standard Equipment - Main motor with worm gearbox - Adjustable blade guides - Cooling system with electric pump - Stable welded base - Control panel mounted on the saw arm Optional Equipment - Roller table extension Technical Specifications CORMAK G5025 Metal Band Saw – Cutting Specifications Parameter Specification Blade dimensions [mm] 2720 x 27 x 0.9 Blade tensioning Mechanical (manual) Blade speeds [m/min] 36 / 72 Saw arm descent adjustment Hydraulic, stepless Minimum material length in the vice [mm] 100 Vice base height [mm] 1000 Power supply 3-phase, 400 V Main motor power [kW] 1.5 Coolant pump power [kW] 0.025 Dimensions (L × W × H) 1055 × 745 × 1850 mm Weight [kg] 370

Condition: like new (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 150 mm, warranty duration: 6 months, Equipment: rotational speed infinitely variable, Kaltenbach KKS 450E – very neat used machine from 2018 with 6 months warranty. Extra options: * Micro-dosing system & wet cooling * Horizontal (hydraulic) clamping cylinder 1 x The KKS 450E is a semi-automatic mitre saw for ferrous and non-ferrous metals such as: steel, stainless steel, chrome steel, brass, copper, bronze, etc. Benefits at a glance: - Clamping, sawing, reversing and releasing – all with a single lever - Saw height adjustable via a lever - User-friendly mechanical controls mounted directly on the machine Chjdpeyr S Szjfx Aktod - Excellent accessibility for saw blade changes and maintenance - Workpiece clamping device on both sides of the saw blade - Two cutting speeds for virtually all applications - Ergonomically positioned controls for user comfort - Adjustable sawing stroke limitation and rapid saw blade return All pre-owned Kaltenbach machines are supplied with a 6-month warranty as standard. Transport and installation available throughout the Benelux.

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex works: Hydraulic horizontal band saw automation machine, Jaespa Type W 320 AZ – 6 Year of manufacture 1995 Cutting capacity: 320 mm round / 90 degrees Cutting capacity: 320 x 320 mm rectangular / 90 degrees Band speed, infinitely variable: 15 – 110 m/min Drive power: 4.9 kW Cutting lengths: 5 – 9999 mm Chjdpfx Ao Aa Iibsktsd Complete as shown in the picture, including all powered roller conveyors Weight: 2.2 tons Price: EUR 2,750.00 plus VAT, ex works

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 1,800 kg, Schmidt Tempo XLC saw blade grinding machine with 2-axis CNC control and clear menu navigation. - CBN grinding wheels for deep grinding with oil cooling, including beveling in a single clamping operation - Re-tooth or re-sharpen HSS saw blades in a single cycle - Re-sharpen segment saws or grind individual segments - Special program for "wolf tooth" grinding - Grinding of variable tooth pitches - Rake and clearance angles freely programmable - Grinding wheel width compensation - Full encapsulation with integrated high-pressure cooling system - Diameter range from 80 to 950 mm - Saw blade thickness up to 10 mm Codpj Ahzcqefx Aktehd - Including a robust blade support (= special design) - Working speed 3 to 75 teeth/min - Possible number of teeth on the saw blade 20-900 - Fully digital servo drives - Automatic central lubrication - Net weight approximately 1800 kg (Loading possible with a forklift)

Condition: used, Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Technical data: - Cutting length: approx. 2,200 mm - Mitre angle: 45° – 90° - Workpiece: max. 50 × 70 mm - Further details: See PDF Cedpjzryu Ajfx Aktohd