Used Mk3 for sale (225)

Condition: good (used), Drilling machine, drill press, pillar drill, column drill -Manufacturer: Solid, column drill type SHW 30 -Motor power: 1.1 kW -Speed speeds: 70 - 1980 rpm, 7 levels -Table size: 270 x 270 mm, travel 630 mm -Clamping table: pivotable on vice device -Spindle holder: MK3 with drill chuck -Spindle stroke: 120 mm -Throat: 280 mm -Column Ø: 110 mm -Accessories: including foot control -Dimensions: 860/640/H1850 mm -Weight: 273 kg Dcedpfx Aoqxvxlocpjn

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: Fahrion, thread cutting attachment GA 30 -Shaft: MK3 Dcsdpfx Acswvfyujpon -Reversing gear: integrated quick return, slip clutch -Clamping diameter: max 23 mm -Dimensions: 230/125/H80 mm -Weight: 6.3 kg

Condition: good (used), Lathe Angelini MAS 160 (similar to Weiler Primus) Spindle speeds: 45-2840 rpm Three-jaw chuck: 140 mm Spindle bore approx. 35 mm Tailstock MK3 Dodpfx Acoy Ryrhspscn Distance between centers: 500 mm Center height approx. 140 mm Coolant system 2 tool holders and various accessories (blue box) The machine has been inspected and runs perfectly

Condition: excellent (used), Drilling machine, bench drill, pillar drill, column drill, box-type drill, tapping machine, threading machine -Machine: is in very good condition and runs very smoothly. -Manufacturer: HIW Helmerding, bench drill -Motor: 1.0/1.6 kW -Speeds: 95 - 1050 rpm, 8-stage Dcodpfxjhv S Eto Acpjn -Feed rate: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel distance 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Protrusion: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

Condition: good (used), live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Traversing centering tip: MK3 mount Djdpfxozhkyue Acpjcn -Type: unfortunately without a type designation -Centering tip: Ø mm -Dimensions: Ø 52 x 162 mm -Weight: 0.7 kg

Condition: good (used), Drill, drill press, pillar drill, pillar drill -Manufacturer: Cordia, column drilling machine type S 26 -Motor: 1000W -Speeds: 95 - 1450 rpm, 6 levels -Table size: 320 x 270 mm, travel 500 mm -Spindle mount: MK3 -Spindle stroke: 100 mm -Projection: 280 mm -Columns Ø: 120 mm -Accessories: including lighting and additional. attached vice, see photos Dodpfx Aslx Nvnecpscn -Dimensions: 700/760/H1950 mm -Weight: 325 kg

Condition: used, Year of construction: 2014, turning diameter 160 mm swing diameter 210 mm turning length 210 mm Control Siemens Sinumeric 840 D total power requirement 34/26,5 kW weight of the machine ca. 13 t Feed diameter: 160 mm Workpiece diameter: max. 63 mm Workpiece length: max. 400 mm Workpiece weight: max. 10 kg Travel distances: X-axis: 340 mm Z-axis: 625 mm Main spindle power: 40%/100%, 34/26.5 kW Torque 40%/100%, 144/112 Nm Dedpeyan Riefx Acpecn Speed: max. 6000 rpm Turret tool positions 2 x 11 (1 gripper) Rapid traverse speed X/Z: 30/30 m/min Spindle size: KK5 Circular diameter: max. 210 mm Workpiece diameter: max. 63/100 mm Tailstock pin: MK3, 120 N/bar Stroke: 5 mm Operating voltage: 400V Control voltage DC: 24V Control voltage AC: 230V Frequency: 50 Hz Electrical equipment: VDE 0113

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 4397, Ladies and Gentlemen, We are selling a Weiler Praktikant 160 AC lathe built in 1998 with original Weiler 3-axis digital readout. This newer version "AC" stands out above all due to the infinitely variable speed control, which makes working on the otherwise very user-friendly machine even easier. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Machine no. 4397 Year of manufacture: 1998 Center height: 160mm Center width: 650mm Spindle passage: Ø 40mm Dcsdpfx Ajq H D U Eecpon Spindle speed: 20-3000 rpm stepless Tailstock taper holder: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Year of construction: 2006, condition: ready for operation (used), A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible Dcedpfxjwftcve Acpjn

Condition: good (used), Threading chuck, tap chuck, tapping chuck, drill chuck, collet chuck, quick-release drill chuck -Manufacturer: FRONTAL ABW, Quick-release drill chuck, MK3 mount Dcedpfx Aox H N Rlecpen -Type: 5-20 mm -Dimensions: Ø 75 x 257 mm -Weight: 2.9 kg

Condition: excellent (used), For sale: ZMM C8C lathe as shown in the photos, marketed under the Huvema brand for the Dutch market. The machine comes from a school workshop where it has been in operation since its production. The condition of the machine is very good. On-site loading of the machine is provided. Turning trials were performed using a VCGT insert with a radius of 0.2. Dcsdpfxjy Rq Ute Acpsn 160 mm Bison chuck with split jaws Turning length: 750 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Tailstock taper: MK3 Spindle speeds: 85–2000 RPM 12 spindle speed steps

Condition: good (used), Drill press, bench drill, column drill, pillar drill -Manufacturer: Ibarmia, column drilling machine type 40 TF / C -Motor: Siemens 1.1 kW -Speeds: 104 - 1450 rpm, right-left rotation -Table size: 360 x 300 mm, travel 600 mm -Spindle mount: MK3 -Spindle stroke: 150 mm -Feed: automatic -Projection: 300 mm -Pillar Ø: 125 mm -Coolant device Dodpfx Aehaxknocpecn -Dimensions: 480/680 / H2220 mm -Weight: 358 kg

Condition: used, Quick-change drill chuck with inserts for holding drilling, reaming, countersinking, and threading tools. Tool holder - quick-change holder - quick-change chuck Type SF 46 MK4 presumably a West German product similar to BILZ / MAYSSO Tool holder: MK4 - only suitable for vertical use (sleeve is locked by its own weight) - suitable for clockwise and counterclockwise rotation Insert sleeve diameter: 46 mm 3 pieces of insert sleeve MK2, length = 105 mm 3 pieces of insert sleeve MK3, length = 109 and 122 mm 3 pieces of insert sleeve MK4, length = 135 mm - Quick-change system for drilling and radial drilling machines as well as CNC drilling machines - various operations can be performed with very quick tool changes in a single workpiece setup - with dual ball clamping system for secure torque transmission and play-free seating of the inserts in the chuck Dsdpfx Acez It Rmopocn - Not suitable for radial loads, e.g., milling, and tensile loads, e.g., back-countersinking. Weight: 14 kg good condition The inserts can be quickly changed without any auxiliary tools and are automatically locked when inserted into the chuck. The inserts are unlocked by axially shifting the switching sleeve. The tool change can be performed with the spindle both stationary and rotating. Short insertion and retraction distances of the inserts allow for tool changes in seconds. The quick-change system can be used vertically for both clockwise and counterclockwise rotation.

Condition: excellent (used), Year of construction: 2019, COURSE ROOM MACHINE For sale is a used Hager HDG 250 lathe with a center height of 250 mm. The machine was used in our in-house lathe courses, is in very good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Technical data: - Center height 250 mm - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) drain safety groove - Spindle bore (diameter) 20 mm - Tailstock quill 150 mm / MK3 - Hand rest upper part 300 mm - Weight 270 kg - Length x width 1,800 x 640 mm - Motor 2.2 kW (3 HP) - Speed 150 - 2,700 rpm The lathe is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Dodpfx Acsrtqi Iopocn Related terms: woodturning machine, lathe, lathe, woodturning bench, turning, woodturning knife, woodturning, turning, machine Reference: DH25500-K

Condition: used, Year of construction: 1970, Column Drilling Machine FLOTT SB32 Spindle mount: MK3 Spindle speeds: 135–770 rpm Dsdpfx Acoyvr Acepecn Round table, diameter 400 mm Overall height: 2 m Weight: approx. 200 kg.

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 140 mm, center width: 500 mm, spindle speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, We are offering for sale a WEILER Primus VC lathe. This model series is particularly distinguished by the Siemens control panel and the fully stepless speed regulation. As the name suggests, the VC can operate with constant cutting speed. The machine has undergone extensive inspection in our workshop and is in excellent geometric, technical, and visual condition. All guides are in good order, the gearboxes run quietly, and the levers are easy to operate. We cordially invite you to test the Primus VC at our premises. We look forward to your inquiry! Availability: Immediately Centre height: 140 mm Centre distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Available thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Additional equipment and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE declaration of conformity, and much more on request. Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are at least workshop-tested Dsdpfoyalurex Acpocn - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can perform a complete or partial overhaul of your chosen machine - Upon request, we can repaint your chosen machine in the color of your choice - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety features - We are happy to handle shipping and/or installation for you

Condition: good (used), Drill, drill press, pillar drill, pillar drill -Manufacturer: Gosmeta, pillar drilling machine type B-30N -Motor: 1.1kw -Speeds: 110 - 920 rpm, 5 levels -Table size: Ø 330 mm, travel 510 mm -Spindle mount: MK3 -Spindle stroke: 125 mm -Projection: 300 mm -Columns Ø: 120 mm Dcsdpfx Ajhx E Ugocpon -Dimensions: 490/750/H1850 mm -Weight: 282 kg

Condition: new, Year of construction: 2024, ALZMETALL pillar drilling machine AX 3/S, drilling capacity in steel 40 mm, spindle speeds: 160-2250 rpm, short spindle MK3, spindle stroke: 120 mm, overhang: 293 mm, column diameter: 115 mm, machine table usable support surface: 514 x 360 mm, with T-slots 2 x 14 mm x 224 mm, distance spindle-table min./max. 117/701 mm, machine table height adjustment via hand crank, machine height without options: 1840 mm, net weight: 260 kg. Standard equipment: Main switch with locking mechanism Motor with thermal protection contact Mushroom push button (latching) for EMERGENCY STOP Speed adjustment, stepless Spindle guard with electrical protection Dcedjz E Sqyepfx Acpon Main switch Right and left rotation Protection class IP 54 Motor insulation class "F" (155°) Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black including the following options: LED machine light, item no. 12. Digital drilling depth display Zero point setting (drilling start) 5-digit LED display, character height 13 mm, item no. 37.1 Delivery time: ex stock Waiblingen Beinstein The machine can be inspected at our premises by appointment.

Condition: good (used), Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, cutter, circle cutter Dedpex H Rwtjfx Acpocn -Manufacturer: Marchner, die cutter, boring head, circle cutter -Recording: MK3 -Diameter range: 33 - 85 mm -Transport dimensions: 340/165/H100 mm -Weight: 5.3 kg

Condition: good (used), Stock number: 3075 Manufacturer: Alzmetall Machine number: 11495 Type / Model: AB3 ES Quill stroke: 180 mm Dcedpfx Aeyifmwocpsn Spindle taper: MK3 Drilling capacity: 30 mm Speed range: 160 to 1,420 rpm, stepless Throat: 280 mm Table diameter: 450 mm Clamping surface diameter: 360 mm Table height adjustment: – mm Column diameter: 110 mm Footprint: 450 x 650 mm Total connected load: 2 kW Accessories/Equipment: Condition: good Weight: 0.3 t Machine dimensions: 600 x 900 x 1,850 mm

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER HDE-59 BIG lathe with a center distance of 1,000 mm. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Motor 2.2 kW / 3 HP / 400 V - Speed levels: 100-450 rpm 300-1,100 rpm 750-2,700 rpm - Center height 250 mm - Center width 1,000 mm - Hand rest 350 mm - Direction of rotation switch - Spindle M33 x 3.5 mm with ASR (Euro) run-off safety groove - Spindle and tailstock cone MK3 - Hollow spindle D = 20 mm - Main spindle with 4 bearings - Quill travel 150 mm (with scale) - Total length 1,780 mm - Weight 235 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Dcedpfxstpnddo Acpon Related terms: wood turning machine, lathe, lathe, turning, turning knife, wood turning, turning, machine, Hager Reference: R-A0117

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Table size: 1120 x 280 mm T-slots in table: 3 x 16 mm Table longitudinal travel: 600 mm Table transverse travel: 250 mm Vertical travel: 360 mm Spindle rotation: +/-45° Distance between table surface and spindle face: 230–630 mm Maximum spindle speed (vertical): 108–2400 rpm Maximum spindle speed (horizontal): 90–2000 rpm Spindle taper: ISO 40 Spindle stroke: 120 mm Power: 2.2/2.2 kW (vertical/horizontal spindle) Dimensions: 1700 x 1450 x 2245 mm (W x D x H) Weight: approx. 1350 kg Accessories, features: - 3-axis SINO digital read our system - spindle feedrate in three steps - 200 mm machine vice - 45° tiltable spindle head - Rotating console - Rotating machine table - 2 x reducers (ISO40/MK3, ISO40/MK2) - Drill head with collet, diameter 3 – 16 mm - 2 horizontal milling spindles - 1 x 15-piece chuck set, diameter 2 – 20 mm - Clamping set - Work light - Cooling water system Dcedpfsybb T Hsx Acpon

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment, two-jaw thread cutting chuck Dedpfx Aexdw Svjcpscn -Manufacturer:Röhm, two-jaw tapping chuck MK3 -Type: MK3 B24 -Tool holder: square up to 24 mm see photos -Dimensions: Ø 85 x 245 mm -Weight: 4.4 kg

Condition: excellent (used), revolving point, revolving center point, revolving Morse taper, revolving center point, revolving lathe point, center point Dcsdpfxehb Ug No Acpsn -Manufacturer: Stieber % Nebelmeier, revolving center point with adapter set unused -Types: RKN 3 DM 4-22 -Recording: MK3 / MK4 -Price / fee: complete -Dimension box: 270/180 / H65 mm -Weight: 3 kg

Condition: used, Gillardon drilling machine, MK3, 2 speeds, right and left rotation, hand and foot switch, light, coolant pump, speed control with hand lever, threading tool, various drill bits, €980.00. Dedpfxozpd U Io Acpecn