Used Mobile Apple Press for sale (19,316)

Year of construction: 2026, condition: as good as new (ex-display), Vacuum Membrane Press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which shortens the drying time of the adhesive, thereby increasing performance. Lhodpfxedwh E As Akqen Possible applications: Veneering / Form gluing / Coating... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of bent and laminated components The heating system is equipped with temperature control. Rubber membrane 2.5 mm Table top is made of plastic, 12 mm Oil-free Becker vacuum pump, 25 m3/h The control system for the vacuum / tank capacity is 15 l Working area: 3000x1500mm Heating system temperature: Max. 60 degrees C Heating system: 4.5 kW Pump power: 0.75 kW Vacuum pump capacity: 25 m3/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg The machine is equipped with a chassis. Location: Available ex-stock in 54634 Bitburg - free loading -

Condition: new, Year of construction: 2025, Chip extraction unit ASA 2803 Mobile, with a 180° rotatable extraction unit For milling, planing, and sawing chips (not suitable for dust) The 180° rotatable extraction unit enables chip extraction from below or above Robust metal fan impeller Standard equipment includes a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-woven Dimensions and weights Chip collection volume: 2 x 120 l Outer diameter of extraction nozzle, inlet: 203 mm Outer diameter of extraction nozzle, outlet: 1 x 100, 2 x 120 mm Lhjdpfxohk S Sdo Akqon Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 53 kg Electrical data Idle speed: 2950 min¯¹ Power consumption: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 1.92 m² Noise emission Sound pressure level max.: 87.5 dB(A) Volume flow Nominal volume flow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Ledpfx Akew Sgnksqjhn Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 350 mm, total width: 605 mm, total height: 1,080 mm, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 70 mm, scan area width: 70 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) Lhsdpfx Aszxcfkekqen - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 28 m², total height: 2,500 mm, total length: 3,150 mm, total width: 1,030 mm, overall weight: 900 kg, Wood chip extraction system, dust extraction system, self-cleaning filter, vacuum system – Hoecker Polytechnik brand. Model: Vacumobil JT 300 – with pneumatic cleaning of filter bags using compressed air during operation. Year of manufacture: 2009 Fan power: 7.5 kW Capacity: 6,000 m3/h Lhjdpfx Aoz Nxxaskqsn Filtration area: 28 m2 Air return Dust tank capacity: 495 liters Equipped with an automatic fire suppression system Inlet diameter: 300 mm Stock number: 1172

Condition: good (used), Durselen PB 16A four-head paper drill The device is in perfect condition, like new! This is the newest one. currently produced model. Production Germany. Four drilling heads with adjustable spacing. Ledpfx Aksz N R Umsqehn The machine has a pneumatic drill cooling system. Sliding work table. Automatic column system – a belt that is moved to the next position when worn out Technical data: Drill diameter: 2-16 mm, Stack height: 50 mm, weight: 300 kg Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Smooth regulation of spindle speed and lowering speed of heads on inverters. Solid construction on a pedestal. Waste is directed to the built-in bin Drill table adjustable in every plane, front and side margins. The set includes operating tools and drills.

Condition: good (used), Hang 117-01 paper drill The device is in perfect condition, 100% functional. The highest class of machines among drilling machines. Each head is independently adjustable, which allows the use of drills of different lengths. Drill table adjustable in every plane, with a lock. The spacing of the heads is adjustable with a crank. Waste directed to an external container. Two operating speeds: 950 and 1900 rpm Technical data: number of drilling heads: 2 diameter of lights: 3-10mm Lhjdoz N R Uyopfx Akqjn stack height: 60mm drill spacing min: 45mm / max 160mm table dimensions: 780x430mm Weight: 100kg Power supply 380V The machine has documentation, maintenance tools, drills, and a new column

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Lhedpoxnqauofx Akqjn Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), Code: 0223 Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Opening between platens mm 1500 Thrust ton 100 Lhjdoxmhcdjpfx Akqjn Movement from bottom to top Motor power Hp 4

Condition: new, functionality: fully functional, mileage: 1 km, power: 47.81 kW (65.00 HP), fuel type: diesel, color: yellow, empty load weight: 6,530 kg, operation weight: 6,530 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, Equipment: cabin, crane, Wheeled Excavator G70X Wheeled Excavator The G70X wheeled excavator is a powerful, precise, and highly mobile machine, ideal for all types of construction work. Powered by a Euro 5 Yuchai F3065-S580 engine delivering 48 kW (65 hp), the G70X offers excellent performance, reliability, and low emissions. Advanced hydraulic technology and efficient operational parameters make this excavator indispensable on any professional job site. Engine and Hydraulic Efficiency Equipped with the Euro 5 Yuchai F3065-S580 engine, the G70X delivers 48 kW (65 hp) and complies with stringent Euro 5 emission standards for environmental friendliness. The engine provides a balance between high power and fuel efficiency, enabling prolonged operation without frequent refueling. The hydraulic oil flow rate of 85 L/min and a main relief valve pressure of 24.5 MPa ensure powerful work performance for rapid, precise movements and high digging force. Excellent Work Parameters The G70X offers a wide operational range, with a maximum digging reach of 6,535 mm, minimizing the need for frequent repositioning. It achieves a maximum digging depth of 3,530 mm, digging height of 6,715 mm, and dumping height of 4,905 mm, making it suitable for deep excavation and efficient material handling at height. Speed and Maneuverability Engineered for high mobility, the G70X attains a maximum travel speed of 30 km/h for rapid transit on the job site. The platform rotation speed is 8.5 rpm, enabling precise control in confined spaces. With a minimum front turning radius of 2,275 mm and a rear turning radius of 1,665 mm, the excavator offers excellent maneuverability, ideal for work in narrow or challenging terrains. Technical Data Weight: 6,530 kg Engine: Euro 5 Yuchai F3065-S580 Engine power: 48 kW (65 hp) Oil flow rate: 85 L/min Main relief valve pressure: 24.5 MPa Maximum digging force: 35 kN Maximum travel speed: 30 km/h Platform rotation speed: 8.5 rpm Fuel tank capacity: 135 L Lodexr Rwhopfx Akqjhn Hydraulic oil tank capacity: 120 L Maximum digging reach: 6,535 mm Maximum digging depth: 3,530 mm Maximum digging height: 6,715 mm Maximum dumping height: 4,905 mm Minimum front turning radius: 2,275 mm Minimum rear turning radius: 1,665 mm Overall length: 5,950 mm Overall width: 2,010 mm Overall height: 2,800 mm Wheelbase: 2,410 mm Tire size: 195/85-20 Ground clearance: 430 mm Blade width: 1,980 mm Blade height: 390 mm Bucket width: 700 mm Boom length: 3,400 mm

Condition: used, pressing force: 150 t, Eccentric Press Brand: ULECIA Serial No.: 1877 Type: Pneumatic Clutch Force: 150 t Lhjdoylzcvjpfx Akqsn Strokes per minute: 40 Stroke (Max / Min): 160 / 24 mm Power: 10 HP *The press is delivered as is, without any type of warranty.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25SFERA08, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2000 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 2400mm Lodpfx Asz Ipdcskqehn -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS21, Exhibition unit ATLANTA NEOS stretch wrapper with articulated arm 99 individually storable programs Start/stop at the same position (corner counter) Wrapping height 2000 mm Mast height approx. 1500 mm (fits through almost any door and in almost any van) Powerstretch PRS 200% film (more available as an option) Motorized pre-stretch system with stepless adjustment Electronically controlled film tension via control unit IEF quick-loading system for easy film roll changes Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit (available as an option) Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series Minimum 160 pallets per Charging – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (pallet included) 2,150 mm Height measurement via light sensor or dimension input on the display Protective bar for emergency stop of the drive Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light at machine start Fall protection for the film carriage Push buttons for start & stop Machine function compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Upward and downward carriage speeds independently adjustable - Upward carriage speed from 1.3 to 5.4 m/min - Downward carriage speed from 1.3 to 5.4 m/min Lhsdpez Iq Trjfx Akqjn - Number of wraps at the pallet base (1-10 wraps) - Number of wraps at the pallet head (1-10 wraps) - Pallet wrapping height adjustment - Film application tension for foot and head wrapping / ascending and descending, independently adjustable - Film pre-stretch for foot and head wrapping / ascending and descending, independently adjustable - Ergonomic height for film changes ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable wrapping programs for the NEOS arm - Cross wrapping (upward/downward) - Simple wrapping (upward only or downward only) - Wrapping cycle with preset start and stop height - Wrapping to a preset height (with the height sensor deactivated) - Wrapping cycle for large pallets - Wrapping cycle for top sheet film - Soft start cycle for applying edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp edges Pallet edge wrapping Wrapping cycle with manual or motorized cord formation (optional) Further systems available immediately from our Ludwigsburg warehouse Also available with the ARYA system – automatic film application possible

Condition: good (used), functionality: fully functional, Year of construction: 1992, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Control system: LVD MNC 95 Lodpfx Akoz I N Hwsqjhn Total power consumption: 14 kW Machine weight (approx.): 7,700 kg

Condition: good (used), Key technical specifications: • Working height: approximately 10.30 meters. Ljdpfxez Ikv Te Akqehn • Maximum outreach: 3.30 meters. • Load capacity (platform): 200 kg to 250 kg depending on the configuration/year. • Total machine weight: approximately 3.28 tonnes (3,280 kg). • Dimensions (L x W x H): 2.81 m x 0.99 m x 1.99 m. • Power supply: 24V / 250 Ah electric traction battery. • Turret rotation: 350 degrees.

Condition: excellent (used), Year of construction: 2010, Used press brake from MVD Type EAP12 040D Capacity 1250 x 40 tons Lhsdpfx Ajz Il U Rekqjn Delem DA56 CNC control Y1, Y2 and X axes CNC controlled Akas Fiessler laser safety system Includes numerous tools

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, stroke length: 265 mm, throat depth: 410 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 6, table height: 900 mm, oil tank capacity: 250 l, overall weight: 12,500 kg, total length: 6,450 mm, total width: 2,650 mm, total height: 2,750 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, number of support arms: 2, pressing force: 175 t, clearance between the columns: 3,600 mm, distance table to ram: 530 mm, table length: 4,050 mm, table width: 104 mm, type of input current: three-phase, Equipment: CE marking, safety light barrier, 2013 Durma AD-S 40175 CNC Press Brake – 6 Axis – Cybelec ModEva 10S Control Used 2013 Durma AD-S 40175 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Cybelec ModEva 10S graphic control, Y1, Y2, X, R, Z1 and Z2 axes, CNC motorised crowning, laser guards, tooling and rear safety doors. Lhsdpfxsz Imc Ns Akqen Manufacturer: Durma Model: AD-S 40175 Axes: 6 Year: 2013 Capacity: 4000mm x 175T Control: Cybelec ModEva 10S Control Includes: Large Selection of Top & Bottom Tooling Description 2013 Durma AD-S 40175 CNC Press Brake, a high-quality 6-axis CNC hydraulic press brake with 4050 mm bending length and 175 tonne bending force. This machine is ideal for precision sheet metal bending, fabrication workshops, engineering companies, subcontract metalwork and production environments requiring a robust, accurate and well-specified press brake. This Durma AD-S 40175 is fitted with a Cybelec ModEva 10S Graphic CNC Control, offering 3D graphical programming and automatic bend sequences. The machine has 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2, giving excellent flexibility for accurate bending and efficient backgauge positioning. The machine is in very good condition and comes complete with a large selection of Euro-style top and bottom press brake tools, laser guards, foot pedal, CNC controlled motorised crowning, quick-release top tool clamps and rear safety doors. Key Features Bending length: 4050 mm Bending force: 175 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Cybelec ModEva 10S Graphic CNC Control Condition: Very good condition Crowning: CNC controlled motorised crowning Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications Model: AD-S 40175 Bending force: 175 tonnes Bending length: 4050 mm Distance between columns: 3600 mm Y-axis rapid speed: 120 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s Crowning: Motorised Daylight: 530 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 Backgauge finger blocks: 2 X-axis travel speed: 500 mm/s X-axis travel: 650 mm R-axis travel speed: 350 mm/s R-axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 litres Machine dimensions: 6450x2650x2750 mm Machine weight: 12,500 kg Cybelec ModEva 10S Graphic CNC Control The machine is fitted with a Cybelec ModEva 10S Graphic CNC Control, a user-friendly press brake control designed for graphical programming and efficient bending setup. Control features include: 3D graphical control interface 10.4” colour TFT screen 128 MB RAM 128 DM main memory Easy Cursor operation Automatic bend sequence calculation Single-page part programming capability CAD/CAM sequence viewing support Included Equipment This used Durma AD-S 40175 press brake is supplied with: 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Cybelec ModEva 10S Graphic CNC Control Large Selection of Euro-style top & bottom tooling CNC controlled motorised crowning Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Front support arms Backgauge finger blocks

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS07, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm Lhedpoz Inbyefx Akqon ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: good (used), Year of construction: 1997, Used Beyeler press brake Type PR10 200 4100 Lhsdpez H Udlefx Akqon Capacity 4100 x 200 tons Cybelec CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC-controlled Wila upper and lower clamping system Tools not included

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Lhjdpoz H I E Aefx Akqon Effective operating hours approx. 22,000 Pre-compression force 28 t Main compression force 85 t Infeed chute 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume output: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-strand vertical, (3-strand horizontal) Oil tank volume 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (L x W x H) Weight approx. 27,000 kg Materials: Paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It was dismantled from ongoing operation. The horizontal tying is currently not functioning. The technical documentation is available. The following work has been carried out by us: New wear plates (Hardox) in the press channel Seals completely replaced on the main cylinder Oil filter changed Vertical tying system overhauled and made operational. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made with advance payment, ex works, without warranty. Our payment terms are 100% advance payment.

Condition: good (used), Year of construction: 2005, stroke length: 1,000 mm, throat depth: 400 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, overall weight: 9,650 kg, total length: 5,700 mm, total width: 1,800 mm, total height: 3,100 mm, power: 7.5 kW (10.20 HP), pressing force: 120 t, clearance between the columns: 2,550 mm, Equipment: documentation/manual, Press brake SAFAN - H-Brake 120TS1 MACH-ID 9820 Make: SAFAN Type: H-Brake 120TS1 Control: TS1 YOP: 2005 Lhsdpfxsz Hka Aj Akqjn Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X/ Z1 / Z2 / R-Central Control: TS1 Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2016, condition: like new (used), Ytron Vibration Mobile Stainless Steel Feeder Hopper EX rated 11 2 D IP65, Atex Vibration motor Temperature probe Year 2016 Lsdpezp N Exjfx Akqehn As new condition Including control box

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 74300 € 1404.27 € 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 8 sides Pneumatic counter-balancing of the ram 7" touchscreen Lodpowiqq Sjfx Akqjhn Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Hydraulic overload protection Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00

Condition: used, Year of construction: 2022, operating hours: 2,600 h, Equipment: all wheel drive, Caterpillar M318 Lhsdszz Ezyepfx Akqjn Engine: Cat C4.4 – Power (ISO 14396): 129 kW / approx. 176 HP – Displacement: 4.4 l – Cylinders: 4 – Emissions: EU Stage V Travel performance Max. speed: up to approx. 35 km/h * Drive: hydrostatic travel drive * Steering: all-wheel steering with oscillating axle Tank & Hydraulics Diesel tank: approx. 350 liters * Hydraulic system: load-sensing hydraulics with multiple auxiliary circuits for attachments Air conditioning Only 2,600 operating hours and in very good condition

Condition: good (used), Year of construction: 2008, working width: 4,100 mm, stroke length: 290 mm, overall weight: 11,000 kg, pressing force: 160 t, distance between side stands: 3,550 mm, Brand: Dener Model: DMP 160/40 Year: 2008 Bending length: 4,100 mm Force: 160 tons 2 axes (Y, X) *Torsion bar machine, Y axis X stop: 650 mm Cylinder stroke: 290 mm Distance between uprights: 3,550 mm NC control: Dener HT062 Neck: 450 mm Ljdjwi Sktspfx Akqohn Motor power: 15 HP Weight: 11,000 kg