Used Mobile Car Press for sale (25,624)

Condition: used, System: Mobile chamber filter press, used Type: Netzsch Area of application: Sludge dewatering Commission No.: 040.087 Filter plate format: 1200x1200 Number of plates: approx. 95 Filter plates: PP Filter cloths: optionally available depending on the medium Filter area: approx. 230 m2 Press capacity: approx. 3400 dm3 Filter pressure: approx. 15 bar Year of construction: 1993 Length: approx. 16 m Width: approx. 3.25 m Gusdpfjwf Uuasx Af Sjb Height: approx. 2.97 m Application: Sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for the solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspections of the systems are available by appointment at our factory.

Condition: used, System: Chamber filter press mobile, used Type: Netzsch Application area: sludge dewatering Machine No.: 89040419 Year of construction: 1994 Guedpfewqydksx Af Sjb Filter plate size: 1200x1200 Number of plates: approx. 100 Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 250 m2 Press volume: approx. 3540 dm3 Filter pressure: approx. 15 bar Washing system: No Conveyor technology: Conveyor belt underneath Discharge: Telescopic conveyor belt Kastner Polymer system: Alltech 3-chamber Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspection of the systems by arrangement at our works.

Year of construction: 2023, condition: new, Mobile complex for cleaning cars with ozone model Celette Trioxyclean, France. 6 units available. Gujdpfxju Dpygj Af Ssb Fast and completely decompose harmful volatile organic compounds inside the car, such as formaldehyde, ammonia, benzene, TVOC (Total volatile organic compounds), etc., deodorize unpleasant smells of cigarette smoke, alcohol and food, effectively kill suspended bacteria and viruses, and protect passengers from cross infection. Ozone (O3) output: 5000mg/Hr Negative ion: 8 – 10 Million Ozone concentration: 15-25mg/L Sterilizer rate: 99.99% Cooling type: air-cooled Input Supply: 220/110 Volt | 50Hz/60Hz Weight: 37 KG Dimension (L x W x H) cm: 55 x 40 x 126

Condition: refurbished (used), Chamber filter press with feed pump, cpl. new built in swap body or sea container, preferably 800 filter press with piston diaphragm pump, special requests can be considered Gusdpefbbqrjfx Af Sob

Condition: new, Mobile pressing plant with belt or packing press - construction depends on output per hour Gedjb Nvffjpfx Af Ssub More detailed Information on request!

Condition: new, PRICE: 5000 EUR Mobile lift for cutter cart Made of stainless steel Gujdpovtzzkofx Af Ssb Lifting weight: 200 kg Dimensions: 1160x800x2900mm Electrical power: 0.75kW Voltage: 220V 50Hz

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm Godpfx Afoh Rkhnj Seub 105 mm CUTOFF 170 ppm YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: used, functionality: fully functional, empty load weight: 1,750 kg, total length: 4,465 mm, Year of construction: 2023, construction height: 2,750 mm, construction width: 2,500 mm, Truck Condition: Ready for operation and fully functional Gsdpfx Afox Alnij Seub Technical condition: New Description: Mobile tire press for tire fitting. Industrial tires up to 20 inches, all tools included. Road approval. Mobile tire press for tire fitting. Industrial tires up to 20 inches, all tools included. Road approval.

Condition: new, Year of construction: 2025, machine/vehicle number: 332050066, Marini Carbon T-Box 160 mobile asphalt plant year: New Godpfehd I Upsx Af Soub capacity: up to 160 to./h. - container type - aggregate hoppers: 4 - capacity of one hopper: 10 m3 - drying drum: counterflow - burner: 13 MW - 1 year guarantee - CE This offer is subject to change, input errors and mistakes. Valid are only the specific agreements in the order confirmation respectively in the sales contract. more machines and mixing plants on our website More information Use: construction, Usable material: asphalt, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: new, Year of construction: 2025, machine/vehicle number: 712520122, FRUMECAR ECA 3000 fully mobile concrete plant condition: NEW Gedpfxshd Na Uo Af Ssub capacity: 120 m³/h mixer: Sicoma MAO mixer size: 3 m³ cement silos: 2x 55 to. guarantee: 1 year from startup more machines and mixing plants on our website More information Use: construction, Usable material: concrete, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: ready for operation (used), functionality: fully functional, mileage: 81,186 km, power: 185 kW (251.53 HP), first registration: 07/2010, fuel type: diesel, empty load weight: 9,174 kg, overall weight: 14,000 kg, axle configuration: 4x2, wheelbase: 4,350 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, Year of construction: 2010, operation weight: 9,174 kg, Equipment: ABS, differential lock, low noise, parking heater, tail-lift, trailer coupling, Truck Doka: - Iveco - Eurocargo 120E25 - EZ: 12.07.2010 - 6-cylinder 185kw diesel, 5880ccm, Euro 5 - 81.186km - Doka, 9-seater - 6-speed manual gearbox - Dif. lock - Unladen weight: 9,174 kg; permissible GG: 14,000kg - 800cm x 250cm x 366cm (lxwxh) - Wheelbase: 435cm - el. FH - el. mirrors - Digital tachograph - Radio/CD - Fog lights - Comfort driver's seat - cruise control Box body: - PALKIT - Case dimensions: 436cm x 250cm x 200cm (lxwxh) Gujdpfx Ajrz Nqlof Sob - Storage boxes left / right - Retractable sliding ladders right + rear Front part: - Folding bench seat - shelf installation - Parking heater - Window left - Door with window right rear part: - DHOLANDIA LBW, 1,000kg; 160cm - Ball-type trailer hitch (3,500kg) - Storage boxes / cupboards / lashing eyes - Workbench with vice - DUFLIS electro-hydraulic ladder rack / roof rack Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: used, Year of construction: 2004, total length: 8,000 mm, total width: 2,200 mm, total height: 2,450 mm, Colour: White Empty weight: 10.000 kg Price: On request - Details: - └ Description: 2 work fields per side - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 1729 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. workpiece width [mm]: 5500 - Max. workpiece height [mm]: 980 - Number of working fields [pcs]: 8 - Number of cylinders per press level [pcs]: 10 Gujdey Nxv Aspfx Af Sob - Number of clamps per press level [pcs]: 10 - Options: Separate pressing levels, Motorized rotation - Transport dimensions: 8000mm x 2200mm x 2450mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Guedpoy Ih Ryjfx Af Seb Features and technical data: Flexible, pneumatic press with very short setup times The press consists of a sturdy press frame, a smoothly movable press carriage, and horizontal and vertical press jaws. All controls are conveniently accessible. The MPH 100 achieves a clamping effect of the press carriage when pressing – similar to a screw clamp. - Equipped with 3 vertical press jaws - Equipped with 2 horizontal press jaws - Cabinet length: 380 - 2500 mm - Cabinet depth: max. 600 mm - Cabinet height: 350 - 1200 mm - Pressing force: 3.6 kN / press jaw - Working height: 600 mm - Weight: 1.1 t - Operating pressure: 6 bar Availability: short-term Storage location: 63934 Röllbach

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Storage location: Nattheim Gujdpfjvvkl Dsx Af Ssb

Condition: excellent (used), Year of construction: 1995, Rotary / carousel wood gluing press HESS, 6 meters Year of manufacture: 1995 The press is operational and in good technical condition. Press infeed Guodpfx Aoy Rzk Sef Sjb • Glue application machine with 2 rollers Technical data of the HESS gluing rotor • 4 working areas, each 6,200 x 1,000 x 150 mm • 4 pressing sections • 8 sliding pressure beams • 2 pneumatic pressure cylinders per each pressure beam • 21 hydraulic rams from above • Pressure force per cylinder: 35,000 N / 3,500 kg • Maximum total pressure at 120 bar: max. 73.5 tons per pressing surface Machine dimensions • Total length: rotor 11,100 mm • Depth: 3,050 mm • Height: 3,350 mm • Weight: 13,500 kg

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg - available immediately - Gusdsy Egz Sopfx Af Sob

Condition: ready for operation (used), Year of construction: 2015, bale weight: 480 kg, Brand: HSM Model: V-press 860 plus Year of manufacture: 2015 Pressing force: 418 kN Voltage: 400 V Max. bale weight: 480 kg (depending on material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 x 125 x 298.5 cm Guedpfsy Nizcjx Af Seb Feed opening dimensions: 120 x 65 cm Condition: Very good! Function tested. Video of the machine in operation available upon request. FLITS Rental & Sales service: With every machine, we provide a bundle of tying wire (120 wires). Need more bundles? Request a quotation without obligation.

Condition: good (used), Advantech AMiS-60 Professional Mobile Workstation for Medical Environments Guodjy Ny A Rjpfx Af Seb A high-quality, mobile medical cart by Advantech (Model AMiS-60). Designed as a "Workstation on Wheels" (WoW), this system is perfectly suited for hospitals, nursing homes, and medical practices, enabling the seamless integration of medication dispensing and patient documentation directly at the bedside. Highlights & Features: Ergonomic Design: Thanks to a manual gas-spring height adjustment mechanism, the cart can be effortlessly and continuously adjusted to suit any user's height with a single motion (accommodating both sitting and standing positions). Secure Medication Dispensing: Equipped with an MDS medication box featuring 16 individually removable compartments. The box includes an electronic control system (Open/Close) as well as a mechanical lock for emergency access. Integrated Power Supply: The chassis houses a high-performance LiFePO4 battery system, designed to provide long operating times and rapid recharging capabilities. Full-Featured IT Workstation: Includes a monitor mount (VESA-compatible), a retractable keyboard tray, and integrated mouse pads (usable on both sides). Hygienic & Mobile: Smooth, disinfectant-resistant surfaces and smooth-gliding medical-grade twin casters (lockable) ensure maximum mobility throughout hallways and patient rooms. Technical Specifications: Manufacturer: Advantech Model: AMiS-60 Monitor: Includes Philips Medical Display (white) Connectivity: Integrated cable management system and equipotential bonding for medical safety compliance. Power Supply: 100-240V AC (standard wall outlet for charging). Accessories: Barcode scanner holder mounted on the monitor arm; emergency key for the medication box included. Scope of Delivery: Advantech AMiS-60 Base Cart Philips Monitor Medication Box (16 compartments) You can find additional items—both new and used—in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2026, functionality: fully functional, Mobile high-pressure waste container washers Autonomous container unit, independent from the chassis. Specifications: - Hydraulic lifting and lowering, - Washes either two small containers (120–240 L) or one large container (1100 L), - Two washing nozzles, - Programmable washing cycles, - Honda engine or equivalent, Gsdewmln Tspfx Af Sjub - Power generator Low operating costs: - 3.5 t permissible gross vehicle weight for the chassis, - Only a few liters of petrol for an entire working day, - Water recycling system (average 800–1000 liters per day), - Up to 100–150 containers (120–240 L) cleaned per day, - Biodegradable cleaning and disinfecting agents (EU-certified). Versatile applications: - The unit can be removed from the truck bed and used separately (especially important during winter). Additional options: - Cleaning of construction machinery, gardens, parks, playgrounds, kindergartens, schools, offices, traffic signs, facades, parking lots, and much more. - Hot water function. - Power sockets (mobile generator) for your electric tools. - Quick couplings for an additional water tank. More photos and videos available on request.

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel Gsdow Nafkepfx Af Seub - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: excellent (used), functionality: fully functional, working width: 1,200 mm, working length: 3,000 mm, LOMEC Windmill Press 3 GLUING SECTIONS! The press is in excellent condition! Gedpfx Afeyr D Rvs Seub TECHNICAL PARAMETERS: - Working length: 3000 mm - Working width: 1200 mm - Pneumatic clamps - 3 gluing sections - 3 side clamps per section Machine dimensions: - Length: 320 cm - Width: 125 cm - Height: 260 cm - Weight: 700 kg Financing options available via leasing or installment payments. Simply visit our website: jbsmaszyny.pl You are welcome to test the machine. Where can you see our machines? JBS WOODWORKING MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE Nationwide machine transport! Do you have questions? Call or write!

Condition: ready for operation (used), Year of construction: 2009, bale weight: 550 kg, total width: 1,570 mm, total height: 2,985 mm, overall weight: 2,403 kg, total length: 1,800 mm, filling opening width: 1,195 mm, filling opening length: 65 mm, bale width: 110 mm, bale length: 120 mm, bale height: 120 mm, transport height: 225 mm, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2009 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Gusdjy Iwi Ejpfx Af Sob Filling opening: 119.5 x 65 cm Condition: very good! Video of machine in operation available on request.

Condition: used, Year of construction: 1989, Working dimensions 3000 x 1250 x 650 mm Cylinder stroke 110 mm Machine dimensions 3240 x 2120 x 770 mm Weight approx. 900 kg Godjxu Egvjpfx Af Ssub

Condition: excellent (used), Year of construction: 2013, operating hours: 1,165 h, ATLAS COPCO COMPRESSOR XAS87 5,00m3 13r !!! Compressor DIESEL ATLAS COPCO XAS87 machine after service Technical data: capacity 5.00 m3/min; working pressure 7 Bar; year of production 2013; engine; KUBOTA Godpfxstu E Eyj Af Seub mileage 1165h!!! compressor fully operational,ready to work,we give warranty net price: 39800 zł gross price: 48954 zł Below is a link to the video , showing the work of the machine

Condition: excellent (used), Year of construction: 2018, ATLAS COPCO COMPRESSOR XAS58 3.0m3/min 2018r. Compressor DIESEL ATLAS COPCO XAS 58 machine after service Technical data: capacity 3.00 m3/min; working pressure 7 Bar; year of production 2018; KUBOTA engine mileage 681h!!! Godpfx Aetyk Svof Sjub compressor fully operational net price: 39500 zł gross price: 48585 zł Below is a link to the video , showing the work of the machine