Used Mobile Car Press for sale (25,673)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir Fpjdpfew Sgnkox Afnec - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Fpodpfsiidm Nex Afnec Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2016, operating hours: 4 h, machine/vehicle number: 84149090, Complete container station with screw compressor, ready for operation in industrial conditions, equipped with a full air treatment system. Ready for immediate start-up. Only 4 hours of test operation. CONTAINER 10" Specifications: Compressor: Ervor Rafale 50 SP (2016) – screw type, oil-lubricated, fixed-speed Motor power: 37 kW (50 HP) Capacity (FAD): ~260 Nm³/h at 7–9 bar Drive: Belt drive with automatic tensioner Power supply: 400 V / 3 phase / 50 Hz Dryer: Adsorption (2-column, regenerated, timer or DP-controlled) Aftercooler: Air-cooled compressed air aftercooler with ventilation Filtration: Pre-filter, fine filter, and final filter class 1 μm / 0.01 μm Container: 10 or 20-foot, steel, ventilated, insulated, with service doors Control: Control panel + pressure switch, hour meter, phase protection Fodpsw D Ut Hefx Afnjpc Technical condition: Very good Cold-regenerated dryer Adsorption dryer ERVOR – 2-column air drying system Integrated in the container station. Suitable for continuous operation, with automatic bed regeneration. The set also includes an aftercooler and a complete set of filters (pre-filter, fine filter, final filter). System ready for industrial or military operation. Final humidity: ≤ -40°C PDP (pressure dew point) Air treatment and cooling system The station is equipped with a multi-stage compressed air treatment system, including: - 3-stage filtration (solid particles, oil, moisture), - Aftercooler with fan, - Insulated and serviceable pipelines, - Control manometers, ball valves, service bypasses, - System designed for heavy-duty use – industrial and mobile applications. Additional photos or video available upon request. We invite you to purchase.

Condition: like new (used), Year of construction: 2008, Equipment: type plate available, M. ROTH ENGINEERING Mixing Tank 1,015 L Pressure-resistant magnetic stirrer with heating jacket Tank capacity: 1,015 liters Jacket capacity: 15 liters Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +4 bar, jacket: -1 / 5 bar Manufacturer: M. Roth Year of manufacture: 2008 Fjdpfxsw T Sd He Afnepc Space requirement: 115 x 150 x 215 cm

Condition: excellent (used), Year of construction: 1997, Equipment: type plate available, GUTH ENGINEERING Mixing Tank 300 L Pressure-resistant magnetic stirrer with heating jacket Fpedpfx Afjw U Sw Ajnjc Tank capacity: 300 litres Jacket capacity: 33 litres Usable volume: approx. 50-250 litres Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +3 bar, jacket: -1 / 5 bar Year of construction: 1997 Space requirement: 120 x 90 x 210 cm

Condition: used, Year of construction: 2001, tank capacity: 620 l, GENERAL Equipment: Control cabinet (no guarantee) Design: standing Year of manufacture: 2001 Remarks: Mobile frame made of stainless steel with 4 plastic casters Outer diameter: 1,010 mm Inner diameter: 800 mm Total height: 2,050 mm Heating/Cooling: available Insulation: available Power: 0.75 kW Max. permissible operating temperature: 135°C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 4.0 bar Top cover: Removable/foldable top cover Agitator: Magnetic stirrer Type of stand: mobile frame Location: Bremen Technical documentation: Drawings, various documentation, CE marking and declaration of conformity, operating manual Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 620 liters Double jacket volume: 12.0 liters Cylinder wall thickness: 4 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Last application: Pharmaceutical VESSEL Max. permissible operating temperature: 135°C Specific weight of medium: 1.3 (t/m³) HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel Fpsdpfx Aox Dmd Isfnsc EQUIPMENT Discharge: 40 mm MATERIAL SPECIFICATION Temperature control system material: AISI 316 (V4A) 1.4435 AGITATOR 1 Agitator manufacturer: HANAG Steriltechnik AG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm Agitator mounting: bottom Agitator equipment: Drive controllable via control cabinet; various technical documents for the agitator available Top cover wall thickness: 6 mm

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, total height: 2,700 mm, total length: 3,900 mm, total width: 900 mm, We are selling the machine due to a new purchase. Viewing is possible by prior appointment. Fsdpfxsxqqpbs Afnopc

Condition: like new (used), Year of construction: 1994, Kallesøe 3 side rotation press New Air pipes Fpedpfxeuzkbms Afnjc

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 5328, total width: 1,350 mm, total height: 1,500 mm, total length: 2,100 mm, briquette diameter: 70 mm, overall weight: 1,500 kg, type of input current: AC, input voltage: 380 V, oil tank capacity: 250 l, funnel diameter: 1,200 mm, power: 9.2 kW (12.51 HP), year of last overhaul: 2024, The press is in very good condition, was recently overhauled by a specialist, has a new control cabinet and has been stored in the warehouse since then. It can be inspected and tested. The hydraulic oil and the die can be cooled for continuous operation. It has a pressing capacity of 140 - 175 kg/h. Fjdpfx Aox H A A Isfnspc

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 941, working height: 1,350 mm, working width: 600 mm, working length: 2,500 mm, TECHNICAL DETAILS Pressing length: max. 2,500 mm Pressing height: max. 1,350 mm Working depth: max. 600 mm MACHINE DETAILS Electrical data Rated voltage: 3/N/PE/400 V Rated current: 11 A Rated power: 4.7 kW Fpsdpfxexnyg Ro Afnoc Frequency: 50 Hz EQUIPMENT Vertical and horizontal press beams operated electromechanically Pressure build-up via frequency-controlled geared motors Vertical and horizontal press pressure adjustable separately Pressing time adjustable

Condition: new, Year of construction: 2022, Equipment: PACE control, ECO mode, HardHat hood made of PE, Xc2003 control system Minimum temperature: -10 °C Dimensions base frame: 4844 x 1807 x 1892 mm (L x W x H) Unload speed: 1500 rpm Rated speed at full load: 1960 rpm Fedpfx Afeii U R Donepc Ambient temperature: 45 °C Motor power: 104 kW Flow rate (FAD): 10.9-9.7 m³/min Operating pressure range: 5-14 bar Compressor control flexible pressure and flow control: PACE Engine make / model: John Deere / 4045HI551 Compressed air treatment consisting of: Compressed air aftercooler, water separator and PD filter. Emission level: Stage V Number of cylinders: 4

Condition: good (used), Code: 0024 Brand: ITALPRESSE Model: NUOVO/SP Quick setting semiautomatic case clamp Technical data Manual loading Max useful dimensions mm 2500 x 600 x 1250 Min useful dimensions mm 250 x 600 x 280 Motorized horizontal cross-beam with display Vertical beam setting N° 6 vertical cylinders Fsdovv Ul Uspfx Afnspc N° 6 horizontal cylinders Cylinders stroke mm 70 Cross-beam stroke mm 920 Installed power Kw 0,55 Overall dimensions mm 3600 x 800 x 2550 h Weight kg 1400

Year of construction: 2004, condition: good (used), Atlas Copco XAS 67 compressor Fpedpfxoiywpze Afnoc 3.7 m3/min Number of hours: 2,371 h Deutz engine Type: diesel

Condition: like new (used), functionality: fully functional, overall weight: 749 kg, fuel type: electric, total length: 2,765 mm, total width: 1,346 mm, total height: 1,435 mm, power: 37 kW (50.31 HP), volume flow: 6.6 m³/h, pressure (min.): 5 bar, pressure (max.): 12 bar, ambient temperature (max.): 50 °C, noise level: 61 dB, type of cooling: water, Year of construction: 2023, machine/vehicle number: APP876730, The Atlas Copco E-Air H250 VSD is a single-stage, oil-injected screw compressor driven by an Atlas Copco electric motor with class H insulation and a speed of up to 9000 rpm. Unique to this new range is the PACE functionality in conjunction with the intuitive XC2003 control system. This ground-breaking technology enables multiple pressure and flow settings, allowing you to adjust the airflow and pressure to suit the requirements of your application. The E-Air VSD motor is characterized by its compactness, energy efficiency and quietness. In addition, the compressors are easy to install and operate. No exhaust fumes, unrivaled performance, low noise level. A plug-and-play design also allows you to transport the E-Air anywhere. Warranty for demonstration unit: 12 months from delivery Scope of delivery of the compressor: - Integrated permanent motor from Atlas Copco - Soundproofed HardHat hood - Cooling circuit with aftercooler - Air and compressed air connection - Air/oil separator and control systems - Leak-proof frame made of ASTM A653 Zincor sheet steel with powder coating - Closed floor pan Fpsdpsud H Tnofx Afnoc - Undercarriage/chassis with fixed drawbar and hydraulic brakes - Overrun and parking brake, automatic reverse, star wheel - Truck DIN towing eye (40 mm), car coupling enclosed loose - 205R14C wheels for trailer operation - Lighting and operating license according to StVZO

Condition: new, Year of construction: 2025, functionality: fully functional, Gannomat Concept 70 Eco body press Year of manufacture 2025 including the following options: - Rapid traverse speed adjustment speed up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel connections when pressing bodies together, as well as when making drawers. Brief introduction: • With tried and tested tolerance compensation (GANNOMAT system) • 2 potentiometers for continuously adjustable pressing force • Pressing force min. 300/500 daN (kg) for Concept Eco or Pressing force min. 600/800 daN (kg) for Concept Primus • Pressing force max. 2200 daN (kg) for Concept Eco or Pressing force max. 3500 daN (kg) for Concept Primus • 3 pressing and adjustment speeds 5/10/25 mm/sec. (with fine positioning / creep speed) • Freely adjustable pressing time pre-selection with automatic opening • Concept Eco: Simple operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simple operation via LCD display Universal application area: • Bodies e.g. for furniture and cabinets • Mitered bodies • Bodies with protruding lids • Drawers • Pressing several bodies / drawers Advantages: • Tried and tested tolerance compensation (GANNOMAT system) • Electromechanical body press with frequency-controlled gear motors • Independent vertical and horizontal press beam • Long service life thanks to tried and tested, high-quality components • Solid and robust construction Fodjvxgrropfx Afnjpc • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple thanks to simple and practical control panel • Fast thanks to press beam positioning speed of up to 50 mm/sec (option) • Efficient thanks to precise pressing of a wide variety of body sizes • Flexible thanks to adjustable parameters such as e.g. Pressing force, pressing time, travel speeds • Precise through precise angle pressing of furniture bodies and drawers • Professional production of bodies and drawers using modern body presses

Condition: used, Hydraulic unit for mobile clinching tongs or mobile shaper ECKOLD type HA 500 / 2 Serial No. 737 / 783 Year of construction 1991 Hydraulic unit type HA 500 / 2 Operating pressure 50 - 500 bar adjustable Delivery rate 2.6 l/min Tank capacity 16 liters Engine power (hydraulics) 3 kW Rated power 3.1 kW Mains connection 380 Volt, 50 Hz. Control voltage 24 Volt, DC - Pressure line with screw coupling - With HAWE GS 2-2 solenoid valve - Mobile on 4 swivel castors Weight without hydraulic oil 125 kg good condition Fjdequzfcspfx Afnopc

Condition: new, Aircraft AIRPROFI 401/50 P Mobile Piston Compressor with Belt Drive (2018410.2) Professional compressors with 2-cylinder high-performance unit made of cast iron and maximum equipment. TECHNICAL DATA Dimensions and weights Length (product) approx.: 810mm width/depth (product) approx.: 430mm Height (product) approx.: 790mm Weight (net) approx.: 56kg Electrical data Fpjdpfskzk Agjx Afnec Supply voltage: 230V Mains frequency: 50Hz output power: 2,2kW Input power: 2,76kW Noise emission Sound power level Lw: 96dB(A) Explanation of sound power level: Sound power level according to DIN EN ISO 3744 (RL 2000/14/EG) Compressor Compressor system: HOS Suction capacity approx.: 365l/min Filling capacity approx.: 266l/min Explanation filling capacity: at 6 bar working pressure Number of cylinders: 2 Number of compression stages: 1 Compressor speed: 1360min¯¹ Compressed air tank Maximum pressure: 10bar Tank capacity: 50l EQUIPMENT Pressure control: Filter pressure regulator Automatic pressure switch: CONDOR Compressed air line material: Flexible armored hose line with heat protection Compressed air treatment: Filter pressure regulator, water separator, mist lubricator Compressed air tapping: Two comfort safety couplings, one ball valve Compressed air tank: Hot-dip galvanized inside and out with fifteen-year warranty against rusting through Tank base: Two wheels with PU foam tires, two swivel castors with locking brake Made in Europe

Condition: used, Year of construction: 1989, Working dimensions 3000 x 1250 x 650 mm Fpodpfx Ajxu Egvofnsc Cylinder stroke 110 mm Machine dimensions 3240 x 2120 x 770 mm Weight approx. 900 kg

Condition: excellent (used), Year of construction: 2017, Portable compressor ATLAS COPCO XAVS186 ST4, machine with aftercooler (air dryer) after full service!!! Technical data: Capacity: 11.50 m³/min; Working pressure: 14 Bar; Year of manufacture: 2017; Fodpfx Aonzh Rbsfnjpc Engine: JOHN DEERE Operating hours: 1,643 h !!!!!; Compressor fully functional, ready for work, with warranty Machine in perfect condition!!! Below is a link to a video showing the machine in operation.

Condition: good (used), Manufacturer: Comp Tip: SB5 Fedpfxsh Eic Ae Afnopc Engine: 2,2 KW Cylinder stroke length: 500 mm Chamber size: 500 x 350 x 400 mm

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Gannomat Mod. 260 carcass press Clamping size 2500 x 1250 x 650 mm Working pressure 0 - 10 bar Cylinder stroke 110 mm Space requirement 3240 x 2120 x770 mm Weight 900 kg Year of construction 2010 CE conform Fpsdpforfbnbex Afnsc The machine is still being refurbished and more pictures will follow shortly

Condition: excellent (used), Year of construction: 1997, Clamping machine Italpresse model SP 30-8 year 1997 S/N 978612997 working lenght approx. 3000mm working width 600mm working height min-max 450 - 1250mm 12 pcs supports 8 pcs pneumatic pressure cylinder Dimensions L x W x H = 3,5m x 0,8m x 2,24 m Fedpfehwwnrox Afnspc 1150 Kg technical information under subject of correction

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0243 / 25634, total height: 2,600 mm, total length: 100,000 mm, total width: 1,000 mm, pressing force: 120 t, Ocmac automatic throughfeed carcass press KOPR CC-EL Manufacturer OCMAC s.p.a. Italy ( acimall) S/N 0243 / 25634 year of construction 1995 Hydraulic self-adjusting electronic carcase press for the assembly of furniture. Automatic feeding of the workpieces Technical data: Max. usable mass: Length 2300mm width 600mm Height 1500mm Min usable dimensions: Length 500mm Width 300mm Height 200mm Feed rate of the conveyor belt: 2,4-12M/min Closing time of the press 20-40 seconds Installed power 11.5 kW Max pressure: 120 bar Voltage: 380 V , 50 hz Fpodjqai H Tjpfx Afnec Net weight 4500 kg

Condition: ready for operation (used), Year of construction: 1969, functionality: fully functional, machine/vehicle number: 70-10 6840, table width: 2,750 mm, table length: 1,500 mm, pressing force: 500 t, distance table to ram: 1,000 mm, stroke length: 850 mm, Refurbished eccentric press including robot and mold carriage TECHNICAL DETAILS Press force: 500 t Stroke: 850 mm Stroke rate: 12 - 24 rpm Adjustability: 325 mm Stand spacing: 3250 mm Table area: 2750 x 1500 mm Ram area: 2750 x 1500 mm Distance between table and ram: 1000 mm Compressed air pulling device in the table Force at 6 atm: 140 t Stroke: 250 mm Ejector in the ram Force at 6 atm: 46 t Stroke: 150 mm Fpsdpfxewcn H Rj Afnoc

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 680 kg, total height: 910 mm, total length: 1,200 mm, total width: 750 mm, table height: 910 mm, table width: 75 mm, overall weight: 195 kg, table load: 680 kg, table length: 1,200 mm, working height: 910 mm, The Rhino Cart® mobile clamping station is a turnkey system for clamping and clamping when welding and fabrication. Clamping and clamping at any point on the reversible, flat ground, nitrided (heat-treated) 1200 x 750 mm table top for accuracy in all your setups. Be ready for any job with the Rhino Cart® package, including: the Rhino Cart® welding table + fixture kit. Welding table (TDQ612075) + 66 pcs. + fixture kit (TDK6100) Fast clamping and clamping at any point on the surface. Accurately set stock for each new project. Table top reversible and is splash and rust resistant. Lockable wheels +set feet for mobile or stationary use. Rhino shelves, racks, and pegboard keep your fixture tools organized and within easy reach! Fpedpfx Afetizfaensc Price excluding VAT excluding shipping: €1950. Price including VAT excluding shipping: €2359,50