Carcase press

Gannomat / Ganner Concept 70 Eco

Condition: new, Year of construction: 2026, The composition of the cabinet handling systems to create a manual, semi- or fully-automatic cabinet assembly line is depending on individual production requirements. Cabinet assembly lines that will make work easier, reduce set-up time and increase precision, we will explain to you in a personal conversation. Cjdpfx Ansdx R D Dowegt

Condition: new, Year of construction: 2025, functionality: fully functional, space requirement width: 3,200 mm, space requirement length: 1,200 mm, space requirement height: 2,100 mm, overall weight: 170 kg, total width: 3,200 mm, total length: 1,700 mm, inner dimension width: 1,500 mm, HEAVY DUTY Drying Trolley / Cantilever Trolley – Designed for the Toughest Demands Key Facts at a Glance: 1. Ball bearing sliding rail for width adjustment from 1.70 to 3.00 m span 2. Space-saving, nestable design 3. High intermediate clearance of 135 mm for easy loading even at fast work cycles 4. Upright square tube support for a minimal contact area 5. Generous usable depth of 1,000 mm 6. High load capacity of 1,000 kg 7. Premium-quality casters for effortless movement, even when loaded Genuine high quality – made in Denmark. The trolleys are generally available directly from stock. To reduce shipping costs for our customers, we deliver the trolleys pre-assembled (see picture). Final setup is very quick and easy. Cgodpfsfiuhvex Anwjt Do you have any questions? Contact us – we are happy to assist!

Condition: new, functionality: fully functional, Year of construction: 2026, The CIDAN MEGAPRO folding machine is the strongest member of the product family. The solid and stable construction makes it possible to bend 6 mm steel (5 mm at 4100 mm) or 4 mm stainless steel (3.2 mm at 4100 mm) over the entire working length (at a working length of 3,100 mm). The MEGAPRO has many intelligent functions as standard, such as automatic adjustment of the sheet thickness, automatic adjustment of the bending angle and CNC crowning in the table. It also has a pneumatic tool clamping system. We also offer various backgauge lengths. The most important advantages: Cgsdstvl Sgjpfx Anwet - For high speed and precision, the upper and bending beam are equipped with double-driven servomotors. - CNC-controlled sheet thickness adjustment, bending center and crowning. - Optionally pointed or goat foot rail (up to 150 mm) can be used - The upper beam achieves a clamping pressure of up to 60 tons. Performance: 6 mm at 400 N/mm² (5 mm at a working length of 4100) 5 mm at 600 N/mm² (3.2 mm at a working length of 4100) 9 mm at 200 N/mm² (7.5 mm at a working length of 4100)

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 4s FORMAT4 Profit H200 13.33 was manufactured in 2019. It features a CNC portal machining center with a working area of 4000 mm in the X-axis and 1670 mm in the Y-axis. The machine is equipped with an electrospindle power of 12 kW and a tool magazine with 12 positions. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 Profit H200 13.33 machine we have for sale. Contact us for further details. • Working field (max panel size) • X: 3300 mm • Y: 1280 mm • Z clearance: 250 mm • Spindle • Tool interface: HSK F63 • Rated power at: approx. 12,000 rpm • Cooling: Air-cooled • Rotation: CW / CCW • Tool magazine • Linear tool magazine (side-mounted): 12 positions • Additional linear magazine on gantry: 4 positions • Max. tool diameter: 250 mm • Max. tool length: 300 mm Cedpfx Anoyi U Eljwegt • Drilling unit • Model: DH 24 6H 2S • Vertical spindles: 18 (12 in X, 6 in Y) • Horizontal spindles: 6 (4 in X, 2 in Y) • Max. drill length: 70 mm • Max. tool diameter: 10 mm • Grooving saws: 2 (X and Y) • Max. saw diameter: 120 mm • Max. speed: 6,000 rpm • Vacuum table • 6 consoles (instead of 4) • Dual-circuit vacuum system • Vacuum cups height: 100 mm • Pneumatic console locking • Adjustable side stops (Y-axis) • Axis system • X-axis: Rack and pinion drive • Y/Z-axis: Ball screw drive • Linear guideways on all axes • Central automatic lubrication • Control and software • CNC control with CAD/CAM software • 3D simulation preview • DXF import capability • Parametric programming • Remote service package (internet-ready)

Condition: excellent (used), Year of construction: 2019, Maximum swing range (vertical axis of the electric spindle): 1650 – 2350 – 3000 mm Vector speed (X-Y) (PRO-SPEED): 85 m/min Programmable speed in Z-axis: 30 m/min Element passage: 170 mm Multifunction device BRC-K: Cedpfxeyffh Nj Anwjgt Technical specifications (Gr-Multif_BRC-K_2.1_N5.1-0.6) 1) Performance: Motor 3.6 kW (S6 - 40%) Number of poles: 2 Speed control: via CNC with frequency inverter Cooling system with fan 3) Horizontal milling spindle: Tool holder: ER25 Spindle speed: 6000–18000 rpm Rotation direction: clockwise/counterclockwise Max. tool dimensions: L1 = 151 mm / W1 = 120 mm / D = 20 mm Max. tool dimensions 2: L2 = 111 mm / W2 = 80 mm / D = 20 mm Max. machining depth: 115–75 mm

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical specifications: - Galvanized sheet steel construction - Space-saving thanks to compact design - Delivered ready for operation - ATEX - pressure shock resistance FSA tested - Low energy consumption with high performance thanks to clean air side high-performance fan with special impeller - Energy-saving motor of efficiency class IE4 - 4 large-capacity collection containers with insert bags Cgsdpfx Ajx H Dahsnwet - High safety and long service life due to certified filter media with test certificate - Compressed air pulse cleaning ('Jet' cleaning) with time-controlled regulation for filter surface regeneration - PLC control system with display, for 4 slide valves EPN 24V DC, 4 machine start contacts and 1 start for external automatic switch-on (additional slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to water supply required) - Extinguishing agent ABC powder is not suitable for fires involving metals or cooking fats and oils - Non-return flap, type-tested - Manufactured according to DIN EN 16770 - Residual dust content in exhaust air below 0.1 mg/m³ - GS-HM-03 'H3' test passed - IE5 efficiency power pack - Start-up slide valve control: Z 16 - Motor power: 11 kW - Rated volume flow (Vnenn): 6,927 m³/h at 20 m/s - Max. volume flow (Vmax): 8,000 m³/h - Negative pressure at Vnenn: approx. 3,100 Pa - Negative pressure at Vmax: approx. 2,300 Pa - Collection volume: 495 liters - Sound pressure level: < 73 db(A) - Extraction nozzle diameter: 350 mm Dimensions: 3,930 x 1,030 x 2,560 mm Weight: approx. 1,080 kg Original price over €30,000 Availability: short-term Stock location: 63934 Röllbach

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Csdpfx Anjmkixwowogt - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: ready for operation (used), Year of construction: 2018, This SCM DMC sd60 belt sander was manufactured in 2018. It features a working width of 1,100 mm and handles materials from 4 to 170 mm in height. Equipped with a main motor of 15 kW, it offers feed speeds of 4.5/9 m/min. Additional features include a rubber-coated calibration roller, sanding roller, hard sanding pad, and electronic controls for precise operation. Consider the opportunity to buy this SCM DMC sd60 belt sander. Contact us for more information. Machine Benefits Technical Machine Benefits • Working width: 1100 mm • Min. /max. Working height: 4 - 170 mm • Sanding belt dimensions: 1115 x 2150 mm • Feed speed: 4. 5 / 9 m/min • Main motor 15 kw (20 hp) Extra Information ontrol Unit Electronic ammeter for the main motor to display current consumption Electronic display of the working height Electronically controlled sanding belt Electronic working height adjustment Electronic Programming Unit LOGIC 50 K Electronic Programming Unit LOGIC SC with LCD display with two rows of dust-proof polishing keypads and integrated LED signals Workpiece Rubber pressure rollers Kickback protection at the inlet Rubber feed carpet Roller table with two rollers at the inlet and outlet of the work table Pneumatic on/off switching of the roller - 1st unit Cgodpfx Aex Nr Sdenwet Pneumatic on/off switching of the roller - 2nd unit TES elastic link sanding pad Pneumatic on/off switching of the sanding pad unit Tools "R" unit with roller "CS" combination unit with roller/sanding pad Rubber-coated calibration roller Rubber-coated sanding roller Hard sanding pad "RA" diagonally ribbed steel contact roller in the first unit

Condition: new, Year of construction: 2026, More time saved! More convenience! The RED-3200/1.0/155* electric swing bending machine is ideal for thin sheet metal processing up to 1.00 mm steel sheet, recurring one-off productions, and small-batch manufacturing. The upper beam and bending beam are motorized. The RED-3200/1.0/150* motorized swing bending machine has a working length of 3200 mm and bends steel sheets up to a maximum thickness of 1.00 mm. Prod-Masz's electric sheet metal bending machines now feature an electric pressure lifting device. Cgsdpfecri E Nsx Anwot This is a fully electric sheet metal bending machine. ✔️ Maximum working length: 3200 mm ✔️ Bending capacity: up to 1.0 mm (steel sheet) ✔️ Titanium-zinc sheet: 1.0 mm, aluminum sheet: 1.2 mm, copper sheet: 1.2 mm ✔️ Bending angle of the bending machine: max. 150 degrees ✔️ Bending jaw thickness: 18 mm ✔️ Cutting with the roller shear across the entire working width ✔️ Lifting of the upper beam in three positions ✔️ Upper jaw stroke: 80 mm ✨ Seize this unique opportunity and upgrade your workshop with the best press brake on the market! Trust the manufacturer that has been an industry leader in metalworking for years. -> Rotary shear (max. cutting capacity 1.2 mm / steel) plus €500 -> crusher/ welt press plus €75 Delivery costs: € please ask Additional equipment: - Rotating finger guide 65cm plus €1250 - Measuring gauge 36cm (2 pcs.) €75 - Measuring gauge 65cm (2 pcs.) €150 Delivery date: every Monday/Tuesday Cash on delivery or prepayment We look forward to hearing from you! - We issue invoices

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Cjdpfew Nafkjx Anwegt Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term