Briquetting press

mütek Systemtechnik MPP NEM 900

Condition: new, Year of construction: 2024, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale Fsdpfx Aolht H Esh Ujgi If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: good (used), Manufacturer: Hazemag Type: SAP 4 Fgjdpfeg Stzbex Ah Uei Inlet Size: 650 x 450mm Electrical Motor: Included See PDF-file below for more detailed information.

Condition: refurbished (used), Year of construction: 2013, The unit is equipped with scroll compressors. The refrigerant is R410A. Cooling capacity is approx. 600kW kW at water parameters +12/7°C and ambient temperature +35°C. The chiller is not equipped with a hydraulic module (no pump or tank). This unit comes from our rental fleet. Transport is not included in the price of the unit. We provide a 3-month warranty (applies to the territory of the Republic of Poland). Fsdjgaqn Iopfx Ah Ujgi

Condition: good (used), 14000l stainless steel tank, AISI316L steel grade, Diameter 2.30m, Height 3.50m, Fjdpsm Tv D Rsfx Ah Usgi Cylinder wall thickness 2.1mm, Thickness of the bottom 3.4- 4 mm, 30 units available The tank requires a concrete spout or a platform on which the drain valve will be based (platform available at additional cost)

Year of construction: 1994, condition: ready for operation (used), Motor power: 15.5kW/19.5kW, pressing force: 320kN, spec. pressure: 425kN/m², machine dimensions X/Y/Z: approx. 5700mm/1900mm/1800mm, weight: approx. 6000kg. The machine has a defect due to moisture and should be checked. Fjdpfxeip D Rpe Ah Usgi

Year of construction: 2019, condition: new, Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C Fjdod Sg Hhopfx Ah Uegi working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7

Condition: good (used), Year of construction: 2003, machine/vehicle number: 4N1028, overall weight: 300 kg, total length: 1,400 mm, total height: 1,520 mm, total width: 780 mm, type of input current: AC, input voltage: 230 V, Equipment: type plate available, SPECTRO LAVMC05A SPECTROLAB spark spectrometer, metal analysis device Fsdpfx Ajvytaloh Uogi Input: 230 VAC / 50 Hz Power: 2500 VA

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Fgsdpfx Aoppyhtoh Uoi Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Condition: used, machine/vehicle number: 12599, Rotor diameter: 600 mm Rotor width: 1450 mm 12-knife rotor 3 rows stator knives Fgjdek N Iy Njpfx Ah Uoi Inlet cross section approx. 780 x 1490 mm Drive motor: 132 kW

Condition: excellent (used), 12 x GRP storage container Volume: 65,000 liters Fgedpfxshzt N Ns Ah Uji Diameter: 3.500 mm length: 7.800 mm Weight: approx. 2.500 kg Final storage medium: vinegar (food) Type: Cylindrical with flat bottom Connections: 1 x manhole oval 1 x residual drain 1 x discharge connection