Used Mobile Dust Extraction for sale (34,728)

Condition: new, Year of construction: 2025, Suction port diameter: 1 x 200, 3 x 100mm Nominal volume flow: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240l Kodpfx Ajhpmawsgzsfa Filter cleaning: motorized motor power: 3 kW Noise level: 78dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Condition: used, filter area: 17.6 m², volume flow: 930 m³/h, intake manifold diameter: 180 mm, nominal power: 15 kW (20.39 HP), Kiekens filter including filter bags (used) Separate fan unit with matching ductwork from filter to fan. filter surface area 17.6 m² 15 kW fan 32.0 kPa max. 930 m³/h max. Kfjdpfxjw Rbwwo Agzea mechanical cleaning: 0.25 kW 1.1 A 690 rpm

Condition: used, machine/vehicle number: 0940, without hall piping Ksdpfxerz Iq Hs Agzjfa

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Kfedpol Dw U Djfx Agzja Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: new, WAM FLO dust collector extraction filter cabinet filter extraction installation New Motor power fan 3kW 3000rpm Filter surface 22m2 Equipped with electro-pneumatic cleaned cartridges Stainless steel 304 Zero dust emission 7 pieces in stock Kodpfx Agowyf Aqozofa See our other advertisements VMA Wekerom

Condition: good (used), Delta New Poluclean P30 dust extraction system Delta New Poluclean P30 Kfedpoihfwpjfx Agzoa Dust extraction system 400 V 5,5 kW 3500 m³/h 95 liters weight: 361 kg Dimensions: HxWxD = 300 x 100 x 97 cm More extraction units in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: new, Year of construction: 2025, Suction nozzle diameter: 250mm Maximum volume flow: 5000 m³/h Nominal volume flow: 3534 m³/h Volume flow monitoring: Pressure difference display Filter area: 25.4 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 70 db Scavenging bag volume: 480 l Filter cleaning: mororic Motor power: 5.5 kW Extinguishing device: yes Machine length: 3510 mm Machine width: 880 mm Ksdpopfat Eefx Agzjfa Machine height: 2545 mm Weight: 850 kg

Condition: like new (used), Selection of our available used spare parts / accessories and consumables. Kfodpfx Aovvrq Isgzea Filter plates (various manufacturers) Filter cartridges Bag filters Filter hoses

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: V-006-11, volume flow: 3,300 m³/h, Extraction filter device for filtering dust and small sawdust with a large filter surface and large collection bags. Kfedpfx Agjwgb H Eszja Used on CNC as a drain for wood dust and sawdust. Including motor.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system Kjdpfeib Dadox Agzsfa "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: as good as new (ex-display), Demonstration machine Technical data: Engine output 3 HP at 100% duty cycle, voltage 400V, suction capacity 3900 m³/h, suction connection 150 mm, distributor 3 x 100 mm, dimensions L x W x H = 150 x 75x 220 cm, weight approx. 60 kg Kodpfx Agjvrvr Iezofa Prices subject to change, errors, printing and typesetting errors reserved

Condition: new, Year of construction: 2025, The DCV8900E+ professional industrial extraction unit has been designed for the most demanding working environments. It is a high-performance unit designed to remove sawdust, dust and shavings from carpentry machines, guaranteeing continuous extraction performance throughout the production cycle. Thanks to its compact design and high suction power, the central extraction unit is suitable both as a stand-alone unit and as part of a multi-point extraction system. Technical data Motor power S1 7.5 kW / 400 V, 50 Hz Motor speed 3000 rpm Extraction capacity 8900 m³/h Suction nozzle diameter 300 mm Suction speed 32 m/s Number of filters 45 Filter material Polyester (5 microns) Filter area 20 m² Dimensions (L x W x H) 2400 x 1170 x 2240 mm Kfsdpfx Agswwq Ndjzea Weight 500 kg Standard equipment 45 polyester filters (5 microns) metal rotor and rotor housing hermetic film containers integrated filter cleaning system

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Kedonyhvqepfx Agzsfa Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Year of construction: 1993, condition: used, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. The unit is made of stainless steel. The extractor is suitable for outdoor installation thanks to a built-in heater that prevents water from freezing. Brand: Venti Oelde Kfsdpfetixlbjx Agzoa Model: RWA 400 15 Kw fan. Capacity - 8000 m3/h year of production : 1993 Inlet diameter - 400 mm Control cabinet with technical documentation included.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 33461/2021/155537, overall weight: 1,150 kg, filter area: 55.2 m², suction capacity: 2,550 m³/h, Dust extraction, fume extraction by Herding. Model: COMP 1500-14/9 SB Clean surface filtration based on rigid filters. High-efficiency blast cleaning system with low compressed gas consumption. Powerful radial fan with direct drive electric motor with attached frequency converter for process- and energy-optimized operation. Integrated control cabinet with processor to control all components. High-quality powder coating of the compact housing. All Herding polymer-based filter media are completely PFAS-free, have an extremely long service life and, depending on the process, achieve a service life of more than 15 years. Unit new. 11 Kw. fan with integrated frequency converter Capacity - 2550 m3/h Kedpfxeuy N S Us Agzefa Inlet diameter - 200 mm stock no.: 0889

Year of construction: 1991, condition: good (used), Dust extraction,welding fume extraction,filtering,self-cleaning filter,pneumatic,vacuum dust collector,absorber for plasma,laser,sandblasting and all kinds of dry dust. Donaldson Torit model: 3DF18 Cyclo - with pre-separator Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, thus high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter cartridges. Kfodpfemrm Raex Agzsa 7.5 Kw fan Capacity 6000 m3/h Underpressure 3000 Pa Filtration area 378 m2 Inlet diameter - 350 mm Ultra WEB filter cartridges 18 pcs.

Year of construction: 2005, condition: good (used), Dust extractor,welding fume extractor by HERDING. Ksdpfx Aopgnfdsgzofa Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Integrated control cabinet with microprocessor to control all components. Herding MULTICOATER - (for sticky dust) for automatic addition of filter additives to protect filter media. 4 Kw fan Capacity - 800 m3/h Herding® DELTA or DELTA² filter elements Filtration area - 14.56 m2

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table Ksdpfxsn Nw Ntj Agzefa extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Filtration area 104 m2 Included : Filter unit Inverter Lime dispenser Noise suppressor

Condition: good (used), Dust collector, extractor, self-cleaning vacuum filter, absorber, dust collector for extraction of graphite dust, metal dust, mineral dust, hard fibers, combustible, hazardous, toxic substances and effective collection of process dust, sandblasting, sodding, grinding, polishing and all kinds of dry dust. The dust extractor has explosion class ST1 and ST2 The vacuum fan is located behind the filter on the clean side which reduces the risk of explosion to a minimum. Pocket filter insert - multi-pocket 11 Kw fan in sound absorbing housing Capacity 3500m3/h Negative pressure 7000 Pa Kfodpfxeg Rhfbo Agzoa Filtration area 24 m2 Automatic filter cleaning by electric motor. The extractor has been working on graphite processing.

Year of construction: 2014, condition: excellent (used), Professional pneumatic cleaning cabin with dust extraction. It is used in power plants, cement and gypsum factories, mills and mixing companies, also in the chemical industry As in the metallurgical industry, dust can have a very negative impact on the health of personnel. Kfsdpfx Agshm E S Aszoa By using cleaning cabins we prevent dust and hazardous substances from being carried into toilets, changing rooms etc. The cabin provides personnel with a simple option to to clean themselves during working hours, e.g. before The cabin provides staff with a simple option to clean themselves during working hours, e.g. before and during breaks in the morning and at midday and at the end of the shift. Exhaustion made in EX version Year of manufacture : 2014 Filtration surface: 16 m2 Capacity: 2500m3/h Vacuum: 2400 Pa The device is in very good condition

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. Kjdpfx Aotq Ufvegzsfa High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1500 m3/h Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Mag. no: 0848/2

Condition: good (used), Year of construction: 2003, RIBO BE-AL-F1 dust extraction , water extraction vacuum filter, separator for grinding , polishing , cutting , brushing , deburring , aluminum and metals wet. Kfedpfx Aotpwrqegzsa Extraction made of stainless steel. The vacuum fan is located behind the filter on the clean side, which reduces the risk of explosion initiation to a minimum. Ideal filter for extracting and filtering hot and flammable or highly hygroscopic dusts that do not allow the use of traditional cartridge or bag filters, guaranteeing reduced maintenance costs. Recommended for use in mechanical workshops, it is ideal for grinding, brushing and metal polishing departments. Eex 1.85 Kw fan Capacity 1600 m3/h Vacuum of 2500 Pa

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Kodporhidmjfx Agzefa Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Year of construction: 1999, condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Kfjdehqd Tvopfx Agzea Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Fan power 11 Kw Efficiency up to 8000 m3/h. Vacuum up to 4300 Pa Filtration surface 128 m2

Year of construction: 1998, condition: good (used), Sawdust extractor,dust extractor,self-cleaning filter,vacuum ALKO ECO JET Filter cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Ideally suited for all kinds of dry dust in various technological processes. It is possible to replace the filter bags according to the requirements and purpose. Year of manufacture 1998 5.5 Kw fan located on the clean side which reduces the risk of explosion initiation to a minimum Inlet diameter 250 mm Capacity 4320 m3/h Filtration area 29 m2 Vacuum 3700 Pa Kjdpfxeiu Hq Ds Agzjfa Extinguishing system "fireman" Air return ATEX flap flap noise damper Extinguishing system *firefighter*. Control cabinet with automation to run 8 machines Technical documentation Dimensions of Extraction: Height - 3.05 m Base width - 2.75 m x 1.00 m