Used Mobile Extraction System for sale (9,661)

Condition: ready for operation (used), Sasse Elektronik 1360.9916005 PHMI mobile HMI, used, normal signs of use, 100% functional Lsdei Ec E Sjpfx Agzjhr

Condition: good (used), Year of construction: 1990, Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 75 kW -Speed: 1480 rpm -Volume flow rate: approx. 40000 m³/h -Total pressure: approx. 1600 Pa -Inlet connection: Ø 710 mm -Outlet connection: Ø 710 mm Ljdpfjb A H E Tox Agzjhr -Dimensions: 2400/1560/H2810 mm -Weight: approx. 1600 kg

Condition: used, Year of construction: 2021, functionality: fully functional, • Machine Type: Industrial Filtration and Extraction System • Product Designation: Filter Unit PPF25-1422vi ATEX & HPRec-A325 • CE-certified: Yes (CE marking visible on the nameplate) Manufacturer • Manufacturer: HEAB Absaugtechnik GmbH • Manufacturer Address (as stated on the nameplate): Quarzring 2, 04600 Altenburg, Germany Part 1: Identification • Model designation: PPF25-1422W ATEX • Serial number: 2021046 • Year of manufacture: 2021 (05/2021) Electrical Data (nameplate) • Motor power: 11 kW • Supply voltage: 3Ph / N / PE, 400 V • Frequency: 50 Hz Fan and Performance Data (nameplate) • Fan type: KHLE 17-450-5V-11-2-R0 • Airflow rate (AP): 4,000 m³/h • Maximum negative pressure: 1,500 Pa Filtration System (nameplate) • Filter area: 163 m² • Filter type: 3 × 225 × 600 mm 22 × 225 × 1,400 mm Explosion Protection (nameplate) • ATEX classification: ATEX • Explosion protection marking: Ex • Maximum housing overpressure: 0.2 bar (gauge) • Explosion pressure relief device: Type: High-speed venting VN735 Ledpfxsx Iul Do Agzohr Part 2: Model: HPrec-A325 Machine type: Filter unit Year of manufacture: 05/2021 Serial number: 2021044 Technical Data / Specifications Motor power: 0.37 kW Electrical connection: 400 V / 50 Hz / 3 Ph / N / PE Fan type: VT500 O2 Speed: 2,800 rpm Airflow rate (AP): 400 m³/h Max. negative pressure: 1,000 Pa Filter media: Pre-coating material: Limestone powder Filling volume: 75 kg (3 x 25 kg) Compressed air supply: 6 bar (dry and oil-free)

Condition: excellent (used), Year of construction: 2008, operating hours: 8,181 h, Equipment: ABS, additional headlights, adjustable boom, adjustable chassis, air conditioning, all wheel drive, cabin, differential lock, gripper hydraulics, hammer hydraulics, hydraulics, low noise, onboard computer, parking heater, standard shovel, For sale: fully operational and well-maintained LANZ FB 3000 material handler from 2008. The machine is in very good technical and visual condition, used in accordance with its intended purpose and regularly serviced. The sale includes a complete set of service documentation, operator’s manuals, parts catalog, and German documentation. ✅ Technical specifications: * Year of manufacture: 2008 * Operating hours: only 8,181 hours * Machine weight: approx. 4,500 kg Ledpjuui Ahofx Agzjhr * Drive: 4x4 – all-wheel drive * Engine: Deutz 4-cylinder turbo diesel, 77 HP * Hydraulic stabilizer outriggers * Spacious, glazed cab with full visibility * Clamshell grab – ideal for handling wood, scrap, or waste * Fully operational machine – ready to work immediately

Condition: used, Year of construction: 2009, 1 piece mobile compressed air complete system SCHNEIDER MAS650-10-90D-SILEND, mobile, intake capacity 650 l/min, output capacity 520 l/min, motor rated power 4 kW, voltage 4 kW, as per pictures and inspection. Colour: grey. Year of manufacture: 2009. Condition: used. Payment method: advance payment by bank transfer. Storage location: workshop. Shipping: Collection only – no shipping available for this item! Lodpfx Agox Ifp Tozohr

Year of construction: 2011, operating hours: 3,800 h, condition: ready for operation (used), functionality: fully functional, McCloskey I54 impact crusher on tracks Lhedpfxox Npv Ho Agzjr 2011 year 3800 genuine working hours on CAT C13 engine' 2900 crusher hours(new controller) Engine CAT C13 - 536 HP 53000 kg Inlet[mm]:up to 1200x1350 mm Max size of inlet materiał:800 mm CSS[mm]: 0-20 to 0-150 mm Capacity[t/h]: from 150 to 300 Feed hopper 6,8 m3 Fitted with overband magnet Fitted with prescreener Fitted with side conveyor 3-generator 31,5 kVA 400 V Wear plates 90% Blow bars 90% Machine in great working condition, can go straigt to work

Condition: used, Used unit Motor 400 V / 750 W Lhedpfx Agjx H U Ntszor with filter cloth Capacity 100 l mobile Availability: short-term Warehouse location: Flörsheim

Condition: good (used), Year of construction: 2015, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, mobile welding fume extraction filter devices, welding fume extractors -Manufacturer: Kemper, filter unit for mobile welding fume extraction Ledpfox Hvqfsx Agzohr -Type: 63100 -Drive: 1.6 kW -Volume flow rate: 340 m³/h -Extraction arm: not included -Machine dimensions: 300/300/H690 mm -Weight: 23.5 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale is a 3-axis CNC machining center of the brand Ingersoll and type OPS 800. Ideal for the production of graphite electrodes thanks to the built-in high-speed spindle The machine is fully functional and ready for immediate use Technical data Year of construction: 2004 X-path: 800 mm Y-path: 700 mm Z-path: 500 mm Control: ANDRON Spindle speed: 42,000 min/-1 Tool changer: 36-fold Tool holder: HSK 63 incl. Graphite extraction: Chip trays Cooling system WKZ not included For sale is a 3-axis CNC machining center of the brand Ingersoll and type OPS 800. Ideal for the production of graphite electrodes thanks to the built-in high-speed spindle The machine is fully functional and ready for immediate use Technical data Year of construction: 2004 X-path: 800 mm Y-path: 700 mm Z-path: 500 mm Control: ANDRON Spindle speed: 42,000 min/-1 Tool changer: 36-fold Tool holder: HSK 63 incl. Graphite extraction: Chip trays Cooling system WKZ not included Lhjdpfx Aeuu Rthegzjr On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2018, operating hours: 6,800 h, functionality: unexamined, Basic package AK560: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC Directive 50 mm EC towing eye incl. guiding shoe Tires 385/65 R22.5 Hydraulically adjustable support leg Splash protection (inner and side-mounted mudguards) Permissible total weight 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT IV emissions standard Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: "Streusel" flail tip Centrally arranged wear strips Electric pump for operating cylinder functions (e.g., raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, releasing travel drive) when engine is off Lhjdpfx Asxx Rvkogzsr 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, gradation on request) incl. rear flap Scraper floor with 32 strips Complete radio remote control Preparation for travel drive Acoustic start-up warning Paint finish: RAL2011 deep orange Additional equipment: Special paint in DB6841 MB-Trac Green Hydraulic travel drive Fuel tank 600 l Fine shredding basket Rear conveyor 4 m, belt width 1800 mm Separate drive for feed roller and scraper floor Reinforcement plates on both sides of the feed hopper sidewalls Impact plate with wear strip and additional tooth row Delivery date by arrangement

Condition: new, Year of construction: 2025, Suction nozzle diameter: 300mm maximum volume flow: 6000 m³/h nominal volume flow: 5089 m³/h volume flow monitoring: pressure difference display Filter area: 31.8 m² Ledpfx Aepfat Njgzshr Residual dust content: less than 0.1 mg/m³ Sound pressure level: 70 db Shrew bag volume: 480 l Filter cleaning: mororic Engine power: 7,5 kW Extinguishing device: yes Machine length: 3245 mm machine width: 1030 mm Machine height: 2595 mm Weight: 780 kg

Condition: used, Year of construction: 1996, total height: 2,200 mm, total width: 700 mm, total length: 1,700 mm, - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 938 551 - Capacity [m³/h]: 1770 - Connection diameter [mm]: 160 - Number of connections [pcs]: 1 - Main fan [pcs]: 1 - Main fan power [kW]: 2.2 - Negative pressure [Pa]: 2500 - Mobile: Yes - Control cabinet present: Yes - Collection bins: Yes - Number of bins/bags [pcs]: 1 - Voltage [V]: 400 - Power [kW]: 2.2 - Transport dimensions: 1700mm x 700mm x 2200mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lhjdpjx E R A Hsfx Agzjr Yorick Diebels

Condition: used, Mobile Extraction Unit AF 14 - Year of manufacture: 2013 - 400 Volt Lhedpfox Htbnsx Agzer - 1.85 kW - 2350 m³/h air flow rate - 140 mm Ø suction port - 200 liter chip collection bag - Steel impeller - Dimensions (L x W x H): 965 x 570 x 2030 mm - Weight: approx. 50 kg

Condition: good (used), Year of construction: 1983, radial fan, dust extraction blower, fan, extraction, dust blower -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm Ljdpfx Aeb A Siuogzehr -Volume flow rate: 10,000 m³/h -Total pressure: 3500 Pa -Inlet connection: Ø 350 mm -Outlet connection: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

Year of construction: 2012, condition: good (used), functionality: fully functional, For sale is a CFT compact filter technic top-mounted dust extraction system, type HKAF 12-30 The system is fully functional and ready for use immediately after connection All documentation for the system available thanks to CFT Digital Contact details can be passed on after purchase. Technical data: Year of construction: 2012 Length: 2476 mm Width: 1277 mm Height: 2330 mm Weight: 600 kg Exhaust air flow rate: 28 m3/min Filter elements: 12 pieces Filter area: 30 m² Filter material PMB 600*500 Shock valves: 4 pieces Rotary cycle control unit: 12 cycles Compressed air parameters: 4.5 bar Loading & or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Lhedorfcpmjpfx Agzor PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2004, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 4000 mm TRANSVERSAL TRAVEL: 1250 mm VERTICAL TRAVEL: 2000 mm RAPID FEEDS L-T-V: 20 m/min TRANSVERSAL TRAVEL OF THE TABLE: 2000 mm PALLET: 2000 x 2500 mm; 1200 rpm MAX ADMITTED LOAD: 28000 Kg HEAD: A/B AXIS AUTOMATIC ; ISO50 DIN ; 15-4000 rpm; 30 kW; 650 Nm Ljdpfx Aewlwhcegzshr TOOL MAGAZINE: CHAIN-TYPE ; 41 POS CONTROL UNIT: FIDIA C20 XPOWER HIGH PRESSURE COOLANT: 12 Bar ACCESSORIES: PORTABLE HANDWHEEL ; SWARF CONVEYOR ; LASER TOOL SETTER

Condition: good (used), Toppy Octabin Mobile Pile Turner This machine is like new, fully functional, and ready to use. Manufactured in 2011. This machine is designed for turning pallets, boxes, big bags, etc. It is also ideal for emptying containers, transferring goods, etc. Technical specifications: Maximum pallet size: 1000 x 1200 mm High stack height Load capacity: 400 kg Device weight: 950 kg Lhsdex Ncz Aspfx Agzor Battery charger included. Controlled from a control panel, fast operation, hydraulic drive. Independent control of each fork, smooth rotation adjustment. The machine can also be used as a pallet loading trolley. Quiet operation. Compact design, space-saving.

Condition: used, Year of construction: 2018, Nominal air flow: 5,089 m³/h Inlet nozzle: Ø 300 mm Negative pressure at nozzle: 2,434 Pa Filter cleaning: compressed air Chip collection volume: 3 x 165 liters Motor power: 7.5 kW | 400 V - 50 Hz / IE3 Sound pressure level: 71 dB(A) Max. compressed air connection: 6.0 bar Protection: 25 A Dimensions (LxWxH): 3,050 x 1,058 x 2,361 mm Weight (net): approx. 952 kg Stock location: Nattheim Ljdpfxoxnlaps Agzehr

Condition: new, Mobile sheds are intended to increase the logistical and production capacity of any company, create new covered spaces to be used for logistical solutions such as permanent or temporary storage of goods, creation of new production or service areas, covering loading/unloading areas, vehicle and machinery storage, in all areas of business application. Lhedpfx Ast Ef T Djgzsr

Condition: good (used), Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm Lhjdpsb A E Uhofx Agzer -Weight: 135 kg

Year of construction: 1997, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD LONGITUDINAL TRAVEL: 4000 mm TRANSVERSAL TRAVEL: 1200 mm VERTICAL TRAVEL: 2000 mm RAPID FEEDS L-T-V: 15 m/min TABLE SIZE: 5000 x 2000 mm SPINDLE: 4000 rpm; 27 kW; 1200 Nm Lhodpfeh Stzkox Agzjr HEAD: A/B AXIS AUTOMATIC ; A 2,5°- B 2,5° ; ISO 50 ; 4000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 30 POS CONTROL UNIT: SELCA S3045 WEIGHT: 25500 Kg ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: EXTENSION 400mm -ISO50 -6.500rpm; AUTOMATIC HEAD EXCHANGE; PERIMETER GUARDING

Condition: good (used), Mobile delivery for folding machine Heidelberg SAK-66 Fully operational, ready for production. Manufactured in Heidelberg, Germany. Ljdpfx Asx Ncwkjgzehr Brand new belts. Can be connected to any Heidelberg folding machine, with smooth delivery speed adjustment. Height and angle adjustment.

Condition: used, Year of construction: 2016, unused - like new Airflow rate: 5,500 m³/h Power: 2.0 kW Filter area: 3.2 m² Negative pressure: 920 Pa Dimensions: 2770 x 800 x 1860 mm Weight approx.: 195 kg Lsdpfjx H Rxqjx Agzohr Stock location: Nattheim

Condition: good (used), GUK ZK-500 Mobile Folding Machine Manufactured by GUK, Germany. The machine is in perfect, like-new condition. All belts are new. Can be connected to any GUK folding machine. The device also operates independently of the folding machine. Lodpjx Ncvtofx Agzjhr Flexible speed control.

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Lhedpfox Ncu Ajx Agzor Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included.