Used Moulder Cutters for sale (3,390)

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Working area Y: 1500 mm Working area Z: 115 mm Max. speed X: 60 m/min Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Dsdpfx Akjx Ap A Rj Ajkw Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Longitudinal conveyor Sectional extraction system Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 7/787, Max. Die-Cut Size : 230 x 230 mm Min. Die-Cut Size : 10 x 10 mm Die-Cutting Pressure (Maximum) : 5700 Kg Dkodszcd Atspfx Ak Aew Max. Stack Height : 170 mm Die-Cutting Strokes max. : 11 p/min Technical data can vary according to job, consumables and possible other factors

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual Dodpfezt Ai Eox Ak Ajkw with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Dkedpfx Ake Ah Db Uj Asw Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Double-feed detection Weight: 240 kg Power supply: 230 V Made in Japan.

Condition: used, Various Gubisch machines for sale. Dksdpfx Ae Aia D Isk Aow Price: €1.00 per kg.

Condition: used, Year of construction: 2021, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, actuation type: manual, Felder table router F 500 M, acquired on March 25, 2021, for profiling, rabbeting, grooving, and edge processing of wood pieces. A classic stationary router for professional woodworking shops. Key technical data: - Machine type: Table router / Spindle router - Model: Felder F 500 M - Spindle diameter: Ø 30 mm - Usable spindle height: approx. 100 mm above the table - Table opening: approx. 180 mm - Spindle speeds: 3000 / 6000 / 8000 / 10,000 rpm - Max. tool diameter at the router fence: approx. 220 mm - Motor power: 4.0 kW - Working height: approx. 916 mm - Weight: approx. 300–320 kg depending on the version - Dust extraction port: approx. 120 mm at the router fence No warranty. Dkedpfx Asztxt Hok Aow

Condition: used, Year of construction: 2019, functionality: fully functional, 6 heads, good, working condition, FREUD tool set Dodpfx Akoz Tymmo Aekw

Condition: used, both grinding discs replaced used good condition cleaned function tested partially refurbished planing irons chisels Dedpfx Ako Ahr Avs Ajkw manufacturer: Iseli type: FL/T SM 175 H 380 V grinding disc diameter mm: 90 / 175 new price approx. €: 4000 storage location 97447 Gerolzhofen, free loading, unpacked handover in the current condition as inspected without warranty

Condition: used, Year of construction: 2019, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 6-24 m/min. LEADERMAC Type LMC 623 COMPACT Four-Sided Moulder ----- Sold on behalf of a client! Working width (min. – max.): 15 – 230 mm Working height (min. – max.): 10 – 150 mm Width and height are motorized/controlled 6 spindles, spindle diameter 40 mm, 6,000 rpm Spindle configuration ----- Spindle 1: bottom Spindle 2: right Dedpfx Ako Adfcts Askw Spindle 3: left Spindle 4: top Spindle 5: top Spindle 6: bottom Technical specifications provided by the manufacturer – no guarantee!

Condition: used, Pappschere - Board Cutter Wilhelm Leo'S Nachfolger 19030 Serial-No. WLNS Dkodpe Ahzwgefx Ak Asw Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Pappschere - Board Cutter Krause blau Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Djdps Ahzx Eofx Ak Ajkw

Condition: used, Letter Press Tiegel - DIE Cutter Heidelberg OHT Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1962 - Serial-No. 137806 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Dodpfe Ahzwrsx Ak Aekw

Condition: used, with new grinding wheel, 175 mm used good condition cleaned functionality tested partially refurbished planing iron chisel Djdo Ahr Agjpfx Ak Askw Manufacturer: Iseli Type: FL/T SM 175 H CE type-tested 380 V Grinding wheel diameter mm: 90 / 175 New price approx. €: 4000.00 Space requirement approx. L x W x H mm: 600x500x550 Weight approx. kg: 15 Total connected load approx. kW: 0.7 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected without guarantee and warranty

Condition: excellent (used), Year of construction: 2000, Robust swiveling milling machine T 26, swiveling from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the swiveling angle is displayed in the upper display, which is then set on the stop, allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for total adjustment and infeed fence individually, as well as input of the cutter diameter; the cutting depth is automatically calculated. Stop with lifting device can be swiveled away (for arc milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Fold-down stop for plunge milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron fence, left 500mm, right 500mm with two insert guide rails. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed connection, switchable from the control panel. Comfort stand with electrically height-adjustable feed support; this can be swiveled away for machine setup and then easily locked back into place. Dust extraction connection 2 x 120mm. Compressed air connection 6 bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belt renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse. See "other offers from this supplier." Dsdjzbm Tfopfx Ak Askw

Condition: excellent (used), Year of construction: 2019, 601 USED Baguette moulder, baguette-making machine FERNETO FVF800I. Dkedpfs Afai Dsx Ak Asw EXTERNAL DIMENSIONS (in cm): - W: 98 - L: 68 - H: 150 TECHNICAL DATA: - power supply: 400V 3AC 50-60Hz - power: 1.10 kW - weight: 202kg The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Year of construction: 1982, condition: used, functionality: fully functional, heavy duty B2+ die cutter Dkedpfx Asz Tk Axsk Asw size max 820x600 mm locks and frames spare die-cutting plate in production

Condition: used, Year of construction: 1969, Used Machine Dedpfx As Ad Rn Isk Askw Year of manufacture: 1969 Features and technical specifications: - Working width: max. 170 mm; planing head: 125 x 170 x 35 mm - Working height: max. 130 mm; planing head: 125 x 130 x 35 mm - 1st shaft: bottom, 3 kW - 2nd shaft: right, 3 kW - 3rd shaft: left, 4 kW - 4th shaft: right, 4 kW - 5th shaft: top, 4 kW - Feed rate: infinitely variable from 5 to 40 m/min

Year of construction: 2019, operating hours: 7,400 h, condition: excellent (used), Pwer Register 2 New SMart Feedeer 2 Elevated 400 mm. Format max. 76x106 cm Format min. 35x40 Max speed 8,000 f/h Minimum 70 g/m2 paper Cardstock max 2,000 g/m2 Corrugated cardboard up to 4 mm. Hours worked 7,300 Bernoulli device Available Febr. - March 2027 Djde Ad I Ulopfx Ak Ajkw

Condition: ready for operation (used), Year of construction: 2020, Garbin FIBER 630 E – Fiber Optic Cable Installation Machine Dsdpo Agg Igefx Ak Ajkw For sale is a Garbin FIBER 630 E, a machine designed for use in fiber optic cable installation work in civil engineering and road construction. This machine is suitable for professional use in fiber optic network expansion and supports efficient workflows on construction sites. If you are interested, we can provide further information regarding the year of manufacture, operating hours, and technical condition. Inspection is possible by appointment.

Condition: excellent (used), Complete high-performance planing line with WACO 6-head planer, double resaw bandsaw, full mechanization, moisture measurement, control system, etc. Truly complete! Capacity approx. 2,500–4,500 m3 per month and shift, depending on dimensions. Dsdpsykmixofx Ak Ajkw

Condition: used, Year of construction: 2011, Spindle swiveling: Yes, -45 to +45° Height adjustment: Handwheel Swivel adjustment: Handwheel Milling vice adjustment: Manual Height indicator: Mechanical counter Swivel angle indicator: Mechanical counter Milling stop indicator: Mechanical counter Milling spindle diameter: 30mm / new milling spindle Spindle speeds: 1500, 3000, 4500, 6000, 9000 Motor power: 4 kW Motor brake: Yes, automatic Dust extraction connection: 2 x 120mm Machine length: 1000mm Machine depth: 1200mm Weight: 580kg Dsdezdzbujpfx Ak Askw

Condition: used, Year of construction: 1993, Number of spindles 6 St. Working width 230 mm Working height 160 mm Feed motor 4 kW Dimensions (L/W/H) 4400 x 1800 x 1500 mm WEINIG Unimat 23 Automatic Planing and Grooving Machine For sale on behalf of a customer customer is still working on it, machine can be visited Dkedpfx Ajzz Ai Ujk Asw ----- Manufacturer’s Technical Specifications: Working width: 20–230 mm Working height: 6–160 mm Number of spindles: 6 Motor power per spindle: 5.5 kW (7.5 PS) Feed motor power: 4.0 kW (5.5 PS) Spindle speed: 6,000 rpm 3 units, table rollers ----- ----- Planing table length: 2 m 1 adjustment gauge 2 planing heads, 240 mm 3 brake units are defective; these could be reinstalled by an electrician. ----- Additional technical data (former order confirmation) attached ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer—not guaranteed!) All prices listed are net, plus applicable sales tax.

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 400 V, Used baguette long moulder model FVF 800 Weight range approx. 50 – 1200 g Output/hour approx. 1,200 pieces - Stainless steel housing - Mobile undercarriage - Various new parts (bearings, drive shaft, main switch, new belts) - Technically inspected, cleaned Fully functional Dksdsy N S Dyspfx Ak Aow (Photos = sample model) All prices are net plus VAT, ex works Syke. Available at short notice (shipping possible at buyer's cost) Advance payment required with order We operate exclusively under our General Terms and Conditions. Subject to prior sale, technical modifications, and errors.

Condition: new, functionality: fully functional, Weinig Hydromat 4300 NEW / UNUSED EQUIPMENT Working Width: 30 – 300 mm (with tool diameter 203 – 250 mm) Working Height: 10 – 120 mm (with tool diameter 203 – 250 mm) 50mm spindles 6,000 RPM Bottom Horizontal Spindle Motor: 75 kW, 6000 RPM. CNC radial adjustment and positioning. Fully automatic straight jointer. Hydro Lock counter-bearing. Top Horizontal Spindle Motor: 75 kW, 6000 RPM. CNC radial & axial adjustment and positioning. Fully automatic straight jointer. Hydro Lock counter-bearing. Right Vertical spindle Motor: 37 kW, 6000 RPM. CNC radial & axial adjustment and positioning. Fully automatic straight jointer. Left Vertical spindle Motor: 37 kW, 6000 RPM. CNC radial & axial adjustment and positioning. Fully automatic straight jointer. Top Horizontal Spindle Dedpe Ah Rrdsfx Ak Aekw Motor: 55 kW, 6000 RPM. Segmented pneumatic pressure shoe with MarathonPower coating CNC radial & axial adjustment and positioning. Fully automatic straight jointer AND profile jointer Hydro Lock counter-bearing. Bottom Horizontal Spindle Motor: 55 kW, 6000 RPM. CNC radial & axial positioning. Adjustable and lockable table plates. Table plates with wood insert. Additional pressure shoe with wood insert for ripping operations. Max sawing height 65 mm with 100 mm flange diameter. Fully automatic straight jointer. Rotaplan pressure plate above bottom spindle. Hydro Lock counter-bearing. Feedworks Short 1.5 m infeed table with heavy 4-roller feed system 6x powered top feed rollers 11kW each (250mm). 5x bottom bed feed rollers 11kW each. (121kW total feeding power) Continuously variable electronic feed speed: 30 – 300 m/min. CNC controlled up/down feed movement positioning. Freewheel gearboxes on 4x roller feed system 250mm x 300mm wide Other information Frequency inverter drive for spindle startup/shutdown. Operating Voltage: 400 V (380-420 V range), 50 Hz; Control Panel mounted on a swivel arm. Separate control cabinet located 2.5 m from planer. Air conditioning unit for switch cabinet to prevent inverters overheating. Integration for third-party mechanization. WEINIG Machine Control (WMC): 21.5" multi-touch screen. MarathonPowerCoating PLUS special wear-resistant table coating. Automatic lubricant pump with 30L tank. Remote Support / VPN Diagnosis Network. Internal workpiece monitoring system. Safety Enclosure: Full soundproof/safety housing Slide-away anti-kickback guard for ripping.

Condition: excellent (used), Year of construction: 1979, Deckel FP2 Aktiv tool milling machine with 3-axis Heidenhain TNC 111 Aktiv digital readout. The machine is in very good condition and comes from a state training department. Fixed table, SK 40 spindle taper. Accessories: various collets and arbor holders, tailstock. Very good, ready-to-operate condition. Can be demonstrated under power by arrangement. Dkodoxyhmvopfx Ak Ajw