Used Mubea Kblh 700 for sale (90)

Condition: used, Year of construction: 1979, Motorized high-performance hole punch MUBEA KL 30 Punching capacity 30 t Hole diameter, steel 45 30 in 8 mm or 20 in 12 mm Throat 210 mm Hodpjv N Hrtjfx Agljh Machine dimensions L x W x H approx. 800 x 600 x 1400 mm Weight 330 kg • Mechanical foot release via cable pull • Hand finder • Adjustable hold-down device Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Sheet metal width - 170 mm, Sheet thickness 8 mm. 80 x 10 mm, flat steel Steel bar cutting stencils for round D 20 mm and rectangular 20x20mm Knife length 170 mm. Sheet holding device Machine length 800 mm (1000 mm with moveable base) Hodjc Uqkcepfx Aglsh Machine height 500 mm plus 560 mm for base Machine weight 255 kg,. on mobile base

Condition: ready for operation (used), Pressure force: 10 tons Projection: 110 mm Required space: 300 x 170 x 680 mm Weight: 32kg Hodpfx Agshtq Hfeljh

Condition: good (used), for sheet thickness up to: 8 mm Hsdpfx Agstx Uqajlsh flat iron: 80 x 12 mm square iron: 20 mm round iron: 18 mm weight approx.: 88 kg space required: 620 x 250 x 380/880 mm high (with/without base frame)

Condition: used, Punching force: 800 kN (punches e.g. 30 m in 20 mm steel) Cuts 350 x 16 mm on the flat steel shear Hjdpfx Agjw Rvu Rjleh Foot switch for stroke activation Support table on the punching side A range of tools is included in the price

Year of construction: 1991, condition: used, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN throat 305 mm notching: rectangle tool mm Hedpod Ih Stofx Agloh total power requirement 5,5 kW weight of the machine ca. 1260 kg dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.

Condition: used, Punching force: 400 kN (punches e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shears With pipe notcher on the bar shear Foot switch for stroke activation Support table on the punching side Hsdpow Im Shefx Agleh Quick change device Range of tools is included in the price

Condition: used, Max. punching force: 500 kN Throat: 610 mm Hedou T Nv Depfx Agljh Including assortment of punches and dies Weight: 1700 kg

Condition: used, The Mubea tools shown are not sold in their entirety. You can tell us what kind of punches and dies you need, so that we can put together an individual range for you. Hsdpfx Agof Srpcslsh

Condition: used, Punching force: 550 kN (punches e.g. 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shears Projection: 305 mm Two separate foot switches for the punching and shearing side, so punching and shearing can be carried out independently Support table on punching side Hedpfx Agjt Exprjljh Assortment of tools is included in the price

Condition: used, Punching force: 750 kN (punches e.g. 30 mm in 22 mm material), with search device via foot switch for punching Projection: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on the flat steel shears Support table on the punching side Two separate foot switches for the punching and shearing side, so punching and shearing can be carried out independently Hodpfx Aer R Auzogloh Assortment of tools is included in the price

Condition: used, Punching force: 400 kN (e.g. punches 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shears Foot switch for triggering the stroke quick-change device Assortment of tools is included in the price Hjdpfolf Trkjx Aglsh

Condition: used, Electrical contact length stops for Mubea and Peddinghaus in various lengths. The price is for a Mubea length stop 1000 mm. Hjdpfef Srn Rex Agljh

Condition: good (used), Year of construction: 1999, Hydraulic steel bar shears with hole punch Hodpfx Aju Sy Uzegleh Fab. MUBEA Typ. HIW 750/510 Year 1999 Technical data Make Mubea Type HIW 750/510 Year of manufacture 1999 Punching pressure 75,000 kg Max. Hole capacity diam. 30 x 22 mm Stroke 70 mm Max. Stroke rate 42/min. Working radius 510 mm Flat steel 450 x 15 mm / 300 x 20 mm Angle steel 150 x 13 mm Square steel 44 mm Round steel diam. 50 mm Installation dimensions L 2.0 x W 1.40 x H 1.80 m Weight approx. 2.5 t Equipment - Electrical contact stop 2000 mm - Tool cabinet - Various tools and accessories as per photos All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, round bar steel 33 mm square edge steel 30 mm L-beam 60 x 8 mm hole diameter in sheet thickness 20 in 13 mm hole punhing press: pressure 35 t hole punching press: throat 320 mm Hodpfx Agevkix Eolsh hole punching press: max. length of stroke 24 mm hole punching press: capacity (dia. x thick.) 28 x 10 mm hole punching press: capacity (dia. x thick.) 23 x 12 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m

Condition: used, round bar steel 30 mm square edge steel 28 mm L-beam 60 x 8 mm flat steel 100 x 12 mm total power requirement 1,5 kW Hjdpfx Agjvu Hbfelsh weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m Profile steel shears with notcher

Condition: used, round bar steel 30 mm square edge steel 28 mm L-beam 90 x 8 mm 150 x 8 mm Hedpovu Hb Ssfx Agleh pressure 35 t total power requirement 2,8 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 0,75 x 1,0 x 1,5 m Profile steel shears combined with: - Foot switch - Length cut

Condition: good (used), Mubea Muhr und Bender section shear combined Hjdpfx Agsncc Hujljh Type: KBL 16 Dimensions: 200x75x197 cm LxWxH

Year of construction: 1982, condition: good (used), machine/vehicle number: 0155282778711, OFFER 21455 Technical data: - Pressure capacity 450 KN - punches e.g. up to 25 mm Ø in steel 15 mm - stroke infinitely variable 0 to 60 mm - stroke rate approx. 16 to 47 1/min Hsdpfshkr Dasx Agleh - throat 760 mm - Installation height 215 mm - working height 1150 mm - Drive 400 V / 7,5 kW - Space requirement approx. W 850 x H 1850 x D 1650 mm - Weight approx. 1350 kg - with: - E. foot switch - 20 pieces div. hole punches + dies

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW Hedepuy H Depfx Agleh - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: good (used), OFFER 70105 Technical data: - Hole diameter approx. 44 , 45 , 48 , 52 , 2 x 55 , 2 x 58 , 61 , 66 mm - 2 x 68 , 2 x 80 , 81 , 85 mm - oblong hole dimension approx. 12 x 42 , 12 x 50 , 18 x 55 mm - Punch holder 58 mm - punch height 54 + 58 mm Hjdpog T S Axofx Agljh - Adapter ring for punch - die height 30 + 40 mm - die outer diameter 90 + 140 mm - adapter ring for dies 90 - 140 mm - Weight approx. 90 Kg

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0168091277886, Offer 23294 Hydr. combined flat and profile steel shears with notching device and hole punch Technical data: - Flat steel shears - blade length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm Hodpfxsrll I Ue Agljh - Hole punch - Punching force approx. 750 KN - Infinitely variable stroke 0 - 70 mm - punches holes in steel up to 30 mm Ø in 20 mm - throat 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - with: - 2 E. foot pedals for two separate work stations - Turntable

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0504791315452, Offer 25218 Technical data: - Pressing force: 350 kN - Punching: e.g. up to 30 mm Ø in steel at 9 mm Hjdpjwuqprjfx Agleh or up to 28 mm Ø in steel at 10 mm or up to 23 mm Ø in steel at 12 mm - Stroke rate: 72 1/min - Throat depth: 200 mm - Installation height: 293 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 550 × H 1450 × D 700 mm - Weight approx.: 400 kg - Including: - stop table with adjustable stops - electric foot switch - machine base - various punches with die

Condition: ready for operation (used), Punching force: 500kN, throat depth: 610mm, stroke: 60mm, max. hole diameter in steel thicknesses 15mm/9mm/4.5mm: 30mm/50mm/100mm, max. material thickness: 15mm. Machine dimensions X/Y/Z: approx. 1100mm/1550mm/1750mm, weight: approx. 1650kg. An on-site inspection is possible. Hsdew U T Uvspfx Agljh

Year of construction: 1990, condition: ready for operation (used), Used for the horizontal winding of profiles, includes control cabinet with main switch of the system, infeed roller conveyor with movable side stop, pneumatically operated lifting device, control panel with emergency stop button, winding unit with height adjustment, outfeed roller conveyor. Connected load: 2.5kW, length: 16,060mm, width: 2485mm, height: 1900mm. With documentation, on-site inspection is possible. Hsdpfx Aswbpy Neglsh