Tool

Mubea

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls 80 to 120 mts/min Max. cutoff lgth: 15 meter track Cpsdofkmr Sjpfx Afnju Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Condition: used, Year of construction: 1966, Used machine Year of manufacture: 1966 Cpsdoxwz Rvspfx Afnju Equipment and technical data: - Roller diameter: 500 mm - Saw blade length: 4080 mm - Saw blade thickness: 0.5 mm - Motor power: 3 HP - Rated voltage: 380 / 220 V - Rated current: 5.8 / 10 A Availability: approx. end of January 2026 Location: Hesse

Condition: used, Pressing force: 560 kN For example, punch a 30 mm hole in 15 mm steel Cpjdpfexz Ep Djx Afnou Stroke triggering via foot switch Assortment of tools is included in the price

Condition: good (used), functionality: fully functional, Year of construction: 1991, Hole punch 700 kN, projection 510 mm, punches 30 mm in max. 20 mm . Flat steel shears: 500 x 18 mm . Notching device with rectangular tool up to 13 mm . Profile steel shears, L-steel, 90° mm . - Machine in good original condition!! approx. 70 sets of hole punching tools Cjdpfoyfibgex Afnepu . .

Condition: used, Year of construction: 2017, machine/vehicle number: 119, Lg.no. 24217 Technical data: - max. working width 2520 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - preselectable bending angle setting - upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 4.0 kW Cedpfstpnplex Afnjpu - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Manufacturer: Mubea, die Ø 90 mm Cpjdpfsiqhg Ujx Afnsu -Type: Mubea 90 Mounting Ø 50 mm -Dimensions: Ø 90 x 115 mm -Weight: 3.4 kg

Condition: used, Year of construction: 1988, 220 V frequency 50 Hz combination machine ja extensive accessories ca. 50 Sätze Cjdpfxondz Npe Afnjpu pressure 50 t

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Load capacity: 12000 kg Max sheet width: 1600mm Cpodpfshrnbkjx Afnju Coil diameter: 1800mm Weight : cca 14 t Without control cabinet!

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: 0166890274834, control type: manual, degree of automation: manual, actuation type: hydraulic, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, throat depth: 650 mm, sheet thickness steel (max.): 15 mm, overall weight: 1,700 kg, total length: 1,500 mm, total width: 650 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), input voltage: 220 V, input current: 26 A, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2023, Equipment: foot remote control, Muhr & Bender (Mubea) Punching Machine KLH 500/610 – incl. punching tools Used punching machine from Muhr & Bender (Mubea), model KLH 500/610, Made in West Germany. Condition: The machine has been professionally inspected by a machinery technician and is in very good, fully operational condition. All functions have been tested. Technical data (all information without guarantee): – Punching force: approx. 500 kN / 50 t – Max. punching diameter: up to approx. Ø 100 mm (e.g. Ø 30 mm in 15 mm steel) – Max. sheet thickness (steel): approx. 15 mm – Throat depth: approx. 610 mm – Stroke: approx. 60 mm – Drive: hydraulic, manual/conventional control with foot switch – Connection: 220/380 V, 3~, 50 Hz – Power: approx. 7.5 kW – Rated current: 26.3 A / 15.2 A Scope of delivery: – Muhr & Bender (Mubea) KLH 500/610 punching machine – including corresponding punching tools (scope as per photos) Cjdpfex Dtp Rox Afnjpu Important notes: – The stated price applies to self-collection only. – Dismantling, loading, and transport are the exclusive responsibility and at the expense of the buyer. – Sale is from used stock, without guarantee or warranty. Inspection possible by appointment. I am happy to answer further questions.

Condition: used, Max. punching force: 700 kN Projection: 510 mm Cuts on the flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat iron Support table on punch side with stops Assortment of tools is included in the price Csdpfx Aeumluqefnopu Weight: 3.000 Very good condition

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 158 h, arm reach: 1,300 mm, Hello, Cedpfx Afop E T N Ajnepu we are selling a demonstration robot UR10e, was used for a concept study but was discarded.

Condition: used, pressure 30.0 t Csdpexaaipsfx Afnopu punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: excellent (used), hole punhing press: pressure 100 t output 40 in 22 mm L-beam 160 x 16.0 mm square edge steel 50.0 mm round bar steel 50.0 mm flat steel 600 x 15.0 / 400 x 20.0 mm throat 610 mm engine output 8.5 kW weight of the machine ca. 3150 kg range L-W-H ca. 2200 x 1400 x 1830 mm Equipment: - Robust electro-hydraulic profile steel shear - Punching station with punch quick-change device and die holder - Includes large support table with movable stop - Continuous stroke adjustment with jog/setup mode - Triangular notching station with support table - Bar, profile, and angle steel shear - Flat steel station with support and guide table - Various punches and dies (drawer cabinet) - 1x electric contact length stop Cpjdpoxn Tydjfx Afnju - 2x freely movable foot switches - Operating instructions (PDF)

Year of construction: 2024, condition: new, Make: DURMA Cpsdpfjd R Er Dex Afnou Type: MS 2504 year of manufacture: 2022 cutting length: 2550 mm sheet thickness: 4 mm Control: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per min.: 42 motor power: 7,5 kW backgauge range: 750 mm table width: 450 mm table height: 800 mm dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment control unit EZM9910 backgauge range 750 mm programmable via control unit Jvcmke Plastic inserts for hold-down 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring loaded stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper knife with 2 cutting edges Lower knife with 4 cutting edges CE marking Extended equipment Adjustable angular fence 0-180 The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Further machines are ready for demonstration at our facility in Staufenberg. We will be happy to provide you with further information on request.

Condition: used, sheet width - max. 200 mm plate thickness 6 mm flat steel 70 x 7 mm round bar steel 13 mm weight of the machine ca. 50 kg Cjdsg Sx R Rjpfx Afnspu dimensions of the machine ca. 800 x 500 x 1800 mm