Accessories and spare parts for sale
Identified location: Ashburn (US) (Edit)
used
Bending tool, die, upper knife, upper tool, straight tool
Bc87aack
-Tool for press brake
-Tool as a die
-Thickness 25/13 mm
-Drawing on the pictures
-Overall length 400 mm
-total height 108mm
-Weight 6,5 kg more
diameter: mm
intake diameter: mm
intake:
weight: wird ausgewogen kg
dimensions L x W x H: m
Abkant-Werkzeuge wie [...] Abstreifer, Matritzen und Stempel
unsortiert
03ka73ox more
chamfer lenght 480 - 4045 mm
4 pieces of unused upper tools:
tool No 5 length: 3050 mm, dimensions see sketch, price = 710,-
tool Nr 6 Length: 3073 mm, dimensions see sketch, price = 970,-
Vso7yq
tool No 9 L = 1925 mm divided, dimensions see sketch, price = 850,-
tool Nr.10 length: 1520 mm, dimensions see sketch, price = 850,-
Prices excl. VAT
Machine dealer with own stock of 2500 m². more
10-compartment Multitool with one set of replacement punches and dies The Multitool
was only once in use.price 4200€.
Bikp820pgi more
used
Bending tool, die, upper knife, upper tool, straight tool
-Tool for press brake
-Tool 90 °
Tf9j2scf
-Drawing with the photos
-Dimensions 26 x 95 mm
-Length 142 mm
-Weight 1.9 kg more
material width:304,8 mm
material thickness:0,12 - 2,2 mm
feed length:304,8 mm
clamping force of fastening pincer:850 N
clamping force of moving pincer:4410 N
feeding force:650 N
weight of the machine ca.:0,2 t
Y7lbzkdwk
dimensions of the machine ca.:0,6 x 1,5 x 0,8 m more
chamfer lenght 3050 - 4020 mm
4 pieces of unused upper tools:
tool No 1 Length: 3700 mm, dimensions see sketch, price = 940,-
tool No 2 length: 4020 mm, dimensions see sketch, price = 880,-
tool No 3 length: 3055 mm, dimensions see sketch, price = 750,-
Giwbsmr
tool No 4 length: 3050 mm, dimensions see sketch, price = 750,-
Prices excl. VAT
Machine dealer with own stock of 2500 m². more
Type: DYNA 40/15
Manufacturer: LVD
Made: 2017
Parameters:
Control system: EASY-FORM 135/30
Maximum force (pressing): 400 kN
Maximum bending length: 1530 mm
Maximum slider stroke length: 200 mm
Maximum distance from the table on the rider: 400 mm
Jvomta
Distance between frames: 1535 mm
Maximum access speed: 100 mm / s
Maximum bending speed: 25 mm / s
Power consumption: 16.5 kW
Rear stop: X. R. Z1. Z2
Machine height: 2500 mm
Machine width: 1205 mm
Machine weight: 3750 kg more
used
Bending tool, die, lower knife, lower tool, prism tool
-Tool for press brake
Bqwr7ad
-Prisms 30 ° 16 mm
-Drawing with the photos
-length 1545 mm (3 x 515 mm)
-Dimensions 30 x 75 mm
-Weight 20.1 kg more
material width:304,8 mm
material thickness:0,12 - 2,2 mm
feed length:304,8 mm
clamping force of fastening pincer:850 N
clamping force of moving pincer:4410 N
feeding force:650 N
weight of the machine ca.:0,15 t
dimensions of the machine ca.:0,7 x 1,05 x 0,6 m
Y7lepewkt more
chamfer lenght 480 - 4045 mm
Various tooling:
Bfjs7ytie7
1: 65 x 65 x 4045 mm (hardly used), dimensions see sketch, price = 940, -
2: 118 x 65 x 3055 mm, dimensions see sketch, price = 550, -
4: 90 x 90 x 515 mm, dimensions see sketch, price = 150, -
5: 65 x 65 x 480 mm & 65 x 65 x 665 mm, dimensions see sketch, price =300,-
Prices excl. VAT
Machine dealer with own stock of 2500 m². more
good (used)
Complete assortment of well-preserved stamps and dies in the same number and diameter as in the illustrated brochure.
Gfqjk0wzm more
used
Bending tool, die, upper knife, upper tool, straight tool
-Tool for press brake
-divided
-Tool 90 °
-Drawing with the photos
-Dimensions 26 x 95 mm
Bgzroymsv8
-length 124 mm (1 x 65/1 x 59 mm)
-Weight 1.7 kg more
dimensions 1525 x 150 x 150 mm
8
V-angle / opening width ca. 72 / 12 ° / mm
V-angle / opening width ca. 78 / 100 ° / mm
V-angle / opening width ca. 78 / 35 ° / mm
V-angle / opening width ca. 78 / 20 ° / mm
Bmsovqfs
V-angle / opening width ca. 82 / 70 ° / mm
V-angle / opening width ca. 82 / 38 ° / mm
V-angle / opening width ca. 82 / 17 ° / mm
ca. 84 / 50 ° / mm more
Power on time: 86849 h
Total Operation time: 38044 h
Length of the working table: 3000 mm
Width of the working table: 1500 mm
Cmqminjx
Maximum thickness of the cut sheet metal: 20 mm
Total power demand: 3.2 kW
Machine length: 5800 mm
Machine weight: 12.5 t more
The illustrated Mubea and Peddinghaus tools are not sold completely.
Eelzltm
You can tell us which stamps and matrices you need, so we can compile an individual assortment for you. more
used
Bending tool, die, upper knife, upper tool, straight tool
-Tool for press brake
-Tool 85 °
-Drawing with the photos
-Dimension 60 x 187 mm
Tf3kpzz2
-Length 100 mm
-Weight 4.4 kg more
TKL warehouse with machine connection
- 4 stations capable to feed 3 machines simultaneously
- Payload per pallet: max. 3,000 kg
- Useful surface of pallet: max. 1,500 x 3,000m.
Bjugfmic9d
- Loading height per pallet: max. 90m
- Net quantity of warehouses: 82 units.
- System height: 9,500m.
- System length: approx. 4,800m.
- System width: approx. 6,300m.
- Bookshelf control
- Double block shelving block
- Pallets: 82 Units
- Seasons:
- Station 1 (front merchandise entry and exit) with scissor ... more
good (used)
Electrical contacts for Mubea and Peddinghaus in different lengths. The price is for a Mubea length stop 1000 mm.
Ovt2ycwz more
2019
as good as new (ex-display)
used
Bending tool, die, upper knife, upper tool, straight tool
-Tool for press brake
-Tool radius 1.5 mm
-Thickness 26/3 mm
Bg0gnaq9qh
-Drawing with the photos
-Overall length 550 mm
-total height 131 mm
-Weight 7.3 kg more
precitec LD 30C D50 - 930l /mm (4-fold) - Linear Drive (P0791-510-00002)
Technical data:
- Dimensions: approx. 380 x 150 x 130 mm
Razjglma
- Weight: approx. 4 kg more
used
total effective length 2,370 mm
effective height 150 mm
bending radius 4 mm
N02wx
damaged please see point mark on photo
weight approx. 73 kg more
Full working Ex Demo resonator for Sale. Excellent quartz condition. 14.000 aprox. Working hours.
Guaranteed max. output (Programmable in 1% increments): 4.000 W
Wave length: 10,6µm
Beam mode: TEM01*
Gating frequency: 100 Hz – 10 kHz
Laser Gas CO2: 1 l/h
Laser Gas N2: 6 l/h
Laser Gas He: 13 l/h
Cutting gas O2: 500 - 2000 l/h
Npo9p
Laser coding system: closed circulation
Electrical consumption values of entire unit2: 33 - 67 kW more
2019
as good as new (ex-display)
used
Bending tool, die, lower knife, lower tool, prism tool
-Tool for press brake
Cmbgbkue
-Prisms 90 ° 8 mm
-Drawing with the photos
-length 1005 mm (1 x 705, 1 x 300 mm)
-Dimensions 20 x 75 mm
-Weight 8.4 kg more
2020
new
1 set of guillotine shear blades
for motorized guillotine shears
Make: LAMI NOVA
Gxsfyb2
Model: MS 3003
cutting length 3050 mm
cutting thickness 3 mm
Delivery time: immediately, subject to prior sale
Options:
Further spare parts on request
Siegfried Volz Machine Tools
Rüschebrinkstr. 151-153
D - 44143 Dortmund - Wambel more
used
total effective length 3,020 mm
Bjbdwigz0w
effective height 145 mm
bending radius 20 mm
weight approx. 132 kg more
Deer foot punch ROLLERI P.145.85.R08 made of tool steel 42 GrMo4 induction hardened 54-60Hrc ground Max 60T/m, used consisting of:
3 pieces L= 835mm
1 piece L 805mm divided into 10/15/29/40/50/100/370 and 100mm horn right and 100mm horn left
Die block 60 x 60mm ROLLERI M460R/T used with V=16mm, V=22mm, V=35mm/ V= 50mm 85° made of tool steel C45 induction hardened 54-60HRc ground
Consisting of
3 pieces 835mm
Bjn8pyowbd
1 piece 645mm
2 pieces 97mm
Die holder for die block 60 x 60mm
ROLLERI C1050R ... more
Press brake tools WMR 100.08.86
Insert die base 13 mm
V8 mm, 86°, insertion radius 2.5 mm
Trumpf/Wila system, height 100 mm
Tool manufactured from 42CrMo4 hardened and ground.
Load 40 t/m
Total length 3090 mm,
Puiejy
Pitch 6x515 mm
Tool unused, therefore addition possible at any time more
used
Bending tool, die, upper knife, upper tool, straight tool
Bgzrrxyk8i
-Tool for press brake
-Tool 90 °
-Drawing with the photos
-Dimension 45 x 166 mm
-Length 217 mm
-Weight 7.6 kg more
2020
new
1 set of brand new guillotine shear blades
for a hydraulic guillotine shear
Make: MEGOBAL
Model: GH 2506
cutting length 2500 mm
cutting thickness 6 mm
Delivery time: immediately, subject to prior sale
Options:
Further spare parts on request
Siegfried Volz Machine Tools
Rüschebrinkstr. 151-153
D - 44143 Dortmund - Wambel
7womqaafy more
Press brake tools model TMR.150.12.30
bending die 30°, R=1 mm
System Trumpf/Wila, H150 mm
Tool manufactured from 42CrMo4 hardened and ground.
Load 40 t/m
Bjnrq7j8vt
Divided bottom tool Total length 3140 mm
consisting of 4x500 / 1x300 / 1x 290 / 1x200 / 2x100 /
1x40 / 1x35 / 1x30 / 1x25 / 1x20 mm
New unused tool, therefore addition possible at any time more
used
Bending tool, die, upper knife, upper tool, straight tool
-Tool for press brake
-Tool 26 °
-Drawing with the photos
-Dimension 13 x 180 mm
Ntlsb
-Length 45 mm
-Weight 0.7 kg more
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
10 valuable tricks for buying used machines online
Sell now on Machineseeker! Over 160,000 inquiries per month
Machineseeker now also sponsering Greuther Fürth
New Machineseeker.com TV commercial with Michael van Gerwen
Sponsorship of Michael van Gerwen and TV advertising
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Sheet metal working
Dealer for Sheet metal working
