Used Multi Mover for sale (8,568)

Condition: new, maximum load weight: 37,650 kg, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, total height: 1,300 mm, Year of construction: 2023, Equipment: ABS, Kässbohrer K.SHG Multi Extendable Container Chassis TECHNICAL INFORMATION: * Total length (retracted): 9,485 mm * Wheelbase retracted P(W): 6,050 mm * Overall width (W): 2,550 mm * Gooseneck (NH): 130 mm * Fifth wheel height (H5): 1,100 mm * Overall height: 3,990 mm * Axle load: 27,000 kg * Kingpin capacity: 16,000 kg * GVW (gross vehicle weight): 43,000 kg * Unladen weight: 5,353 kg * Total length F1+M2+R3 Pos.: 12,552 mm * Total length F1+M3+R2 Pos.: 12,552 mm * Total length F3+M3+R4 Pos.: 14,080 mm Nkedjmxfp Aopfx Afzet * Total length F2+M3+R4 Pos.: 13,964 mm CHASSIS AND RUNNING GEAR: * Chassis made of high-quality, high-strength S700 MC * KTL-coated chassis * BPW axles with air suspension and disc brakes * 1st axle liftable, automatically controlled via EBS * Tyres: 385/55 R22.5 * Jost landing legs OTHER FEATURES: * 5x2 container locks * Suitable for transporting 1x20 ft (at rear), 2x20 ft, 1x30 ft, 1x40 ft ISO, 1x40 ft HC, 1x45 ft HC ST, 1x45 ft HC LT, and 1x13.60 CB (with special permit) * Wabco brake system * 1x plastic toolbox * 2 rear mounted warning signs in accordance with UN ECE R70 regulations * Partial metallization * Chassis color: MB7350 Nova Grey For further information, we are happy to assist you.

Condition: excellent (used), axle configuration: 3 axles, first registration: 03/2013, total width: 2,470 mm, suspension: air, tire size: 385/65-R22.5, color: black, Year of construction: 2013, Equipment: ABS, = Further options and equipment = - EBS (Electronic Braking System) - Lift axle - Air suspension - Disc brakes = Notes = Attractive 2013 D-TEC FLEXITRAILER 45FT High Cube swap chassis with SAF axles, equipped with disc brakes, ABS/EBS, first axle as lift axle, double extendable frame (center and rear) plus fixed head, suitable for 1x20FT, 2x20FT, 1x20FT center, 1x30FT, 1x40FT, 1x40FT HC, 1x45FT HC. Unladen weight: 4,800 kg, Gross vehicle weight: 43,000 kg, tyres 385/65-R22.5 (R: 4/8/7mm; L: 10/6/8mm), Belgian registration with valid roadworthiness certificate until 26.10.2026. Two units available. = Additional information = Axle configuration Tyre size: 385/65-R22.5 Axle brand: SAF DISC Suspension: air suspension Rear axle 1: lift axle; max. axle load: 9,000 kg; left tyre tread: 25%; right tyre tread: 60%; brakes: disc brakes Rear axle 2: max. axle load: 9,000 kg; left tyre tread: 50%; right tyre tread: 40%; brakes: no brakes Rear axle 3: max. axle load: 9,000 kg; left tyre tread: 45%; right tyre tread: 50%; brakes: disc brakes Njdpfx Afsx Up Sfozokt Weights Unladen weight: 4,800 kg Payload: 38,200 kg GVW: 43,000 kg Functional Body brand: D-TEC FLEXITRAILER Extendable chassis: Yes Service history and condition APK (roadworthiness inspection): valid until 12/2026 Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more details.

Condition: new, empty load weight: 750 kg, maximum load weight: 2,250 kg, overall weight: 3,000 kg, loading space length: 5,400 mm, loading space width: 2,070 mm, tire size: 195/50r13c, Car transporter or multi-transporter from the manufacturer HULCO model CARAX-2 3000 540x207. As standard equipment, the Hulco car trailer has an aluminum floor, lashing eyes on the outside of the frame, loading ramps that can be inserted under the loading area, sloping rear, low chassis, stable welded steel frame, support wheel and a V-drawbar. We also offer accessories for Hulco car transport trailers such as high tarpaulin, wheel stoppers, rear support set, drawbar box, car lashing straps and locks. --- You can also find all of our cost-effective offers on our homepage Delivery throughout Germany (except islands) possible! Feel free to ask us about the prices. ---    Car trailer center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Nkodpfeh Rlvdjx Afzet Pick-up times: Monday - Friday – 9 a.m. 8 p.m.    Pick-up is not possible on Saturdays!

Condition: excellent (used), axle configuration: 3 axles, first registration: 03/2013, total width: 2,470 mm, suspension: air, tire size: 385/65-R22.5, color: black, Year of construction: 2013, Equipment: ABS, = Additional Options and Equipment = - EBS (Electronic Braking System) - Lift axle - Air suspension - Disc brakes = Notes = Attractive 2013 D-TEC FLEXITRAILER 45FT High Cube swap chassis with SAF axles, disc brakes, ABS/EBS, first axle is a lift axle, extendable twice (center and rear) with fixed head, suitable for 1x20FT, 2x20FT, 1x20FT center, 1x30FT, 1x40FT, 1x40FT HC, 1x45FT HC containers. Unladen weight: 5,140 kg, Gross vehicle weight: 43,000 kg. Tires: 385/65-R22.5 (Rear: 6/4/4 mm; Front: 6/6/5 mm). Belgian registration with valid vehicle inspection (APK) until 26.10.2026. Two units available. = Further Information = Axle configuration: Tire size: 385/65-R22.5 Axle brand: SAF DISC Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 40%; Tire tread right: 40%; Brakes: Disc brakes Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 25%; Tire tread right: 40%; Brakes: No brakes Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 25%; Tire tread right: 30%; Brakes: Disc brakes Weights: Unladen weight: 5,140 kg Payload: 37,860 kg Gross vehicle weight: 43,000 kg Functionality: Nkodpfex T Di Njx Afzot Body manufacturer: D-TEC FLEXITRAILER Extendable frame: Yes Maintenance, History, and Condition: APK (vehicle inspection): valid until 10/2026 Technical condition: very good Optical condition: very good Further information: Please contact Arne Honingh for more information.

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA - multiple combination for sawing, milling, planing-thicknessing. The work tables made of heavily ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free working. Unique in this performance class: lightweight aluminum sliding table, anodized, with ball contact system. Swiveling saw blade from 90° - 45 Table extension arm with aluminum crosscut fence for panels and large workpieces Planing unit with TERSA quick change system with three planing knives Helical toothed steel infeed roller for constant workpiece infeed during thickness planing Curved milling hood for profiling, standard with fine adjustment Milling unit with two speeds Three independent motors for each working unit Quality Made in Europe Equipment details Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail Durably lightweight Saw unit adjustment Manual height and angle adjustment of the saw unit via star knob Precise positioning by means of a scale TERSA planer cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Nkodpfx Afedqzh Tjzet Particularly low noise Table planer The milling unit has two speeds for flexible tool use. The machine is equipped with a finely adjustable bow cutter for profiling. With the aluminum slide tenoning is possible without any problems. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helical toothed infeed roller guarantees constant infeed. The planing table can be folded towards the inside of the machine to save space. The changeover from planer to thicknesser is done in seconds with one handle. Surface planer Standard with TERSA planer blade quick change system Large dimensioned jointer tables The planing and thicknessing tables are made of grey cast iron and guarantee the smoothest running and vibration-free operation. Saw unit Saw swivels up to 45 With saw blade 250 mm Ø at max. 80 mm cutting height On the rip fence can be cut up to 500 mm width. Table extension With degree scale and aluminum fence for angular cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer cutterhead Anodized aluminum format sliding carriage Miter fence with one folding stop Multifunctional fence for parallel cutting and planing Eccentric clamping arm Model minimax c 26g TERSA Article no. 5500027 Cutting length 1200 mm Cutting width with rip fence 500 mm Max. Cutting width left of saw blade 1200 mm saw blade inclination 90 - 45 degrees Max. Cutting height at 90° 80 mm sliding carriage length 1140 mm Format sliding carriage width 201 mm Height of sliding table 70 mm Saw table length 1024 mm saw table width 224 mm saw table height 900 mm Cutterblock type TERSA Cutterblock diameter 62 mm Number of planing knives 3 pcs Planing table width 260 mm Dressing table length 1040 mm Angle of inclination of sawing/planing fence 90/45 degrees Dressing chip removal max. 3 mm Thicknessing table length 450 mm Thicknessing table width 260 mm Thickness working height min. 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, cutting height (max.): 120 mm, cutting width (max.): 1,000 mm, disc diameter: 400 mm, rotational speed (max.): 3,000 rpm, MEM Cobra lite edger. In good condition. 2 movable axles 18.5KW. Fixed axle 37KW or 11KW. Several new blades included. Nkjdsx Tzkkjpfx Afzjt

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Conveyor; Pick-up; Threading device; Combing device; 4 cross slides positions 1, 2, 4, 5; Integral loader Cucchi BLT compact version model MULTI L-6 year 2019 (diameter 38 mm); Tool holder, cams Nedpfx Afsya Aq Dszokt

Condition: new, maximum load weight: 33,190 kg, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment features. Full equipment details available upon request. Frame: * Standard ladder-type frame in lightweight steel construction with through-bolted crossmembers * With pre-cambered chassis frame * Coupling plate approx. 8 mm thick, fitted with a 2-inch fifth wheel king pin according to DIN 74080 / ISO 337 Chassis: * An increase in the total gross train weight is permitted for indivisible loads * Axle lift mechanism on axle 1, lift control fully automatic, load-dependent * Make of your choice, Kögel recommended * Tri-axle assembly with disc brakes Ø approx. 430 mm, offset approx. 120 mm * Air suspension with approx. 180 mm travel Vehicle Tyres: * Wheels with built-in sensors compliant with UN ECE R141 * Sixfold 385/65 R 22.5 UNIROYAL TH 506 tyres on 22.5 x 11.75 steel rims, offset approx. 120 mm (ET 120) Chassis Attachments: * Landing gear (make of your choice from Kögel), mechanical with compensating foot, approx. 24 t lifting capacity. Single-side operation, located on the right in the driving direction * Spray suppression system according to Regulation (EU) No. 109/2011 * 1 pair of quarter-circle mudguards in front of the axles * 1 pair of straight mudguards with mud flaps between the 1st and 2nd axle * 1 pair of quarter-circle mudguards with mud flaps behind the axles * 2 wheel chocks with brackets * Side underrun protection according to ECE-R732 * Waterproof plastic toolboxes, dimensions (internal) approx. 545 x 400 x 400 mm. Mounted at the rear, 1 left, 1 right * Rear right access ladder, extendable; high, rigid steel rear underrun protection according to ECE-R58 * 1 pair each of extendable warning panels for oversize loads, retroreflective red/white, with LED lighting, spiral cable, and connector. Arranged at the front and rear sections of the vehicle Brake / Air Suspension System: * EBS system 2S/2M with stability program (including ABS/ALB function), EBS connector ISO 7638 (without connecting lines), parking brake as spring-applied brake, external pneumatic connections, as well as external EBS diagnosis port via ISO 7638 connector * EBS system (make of your choice from Kögel) * Air suspension system incl. 1 lift and lower control valve, mounted on the left in the direction of travel behind the axle assembly. Driving height automatically adjusts * 2 foolproof coupling heads at the front ISO 1728 * Steel air tanks for brake system and air supply ( EN 286-2 ) Nkjdpfjx Uvlfex Afzst Floor: * Floor panels approx. 30 mm thick * Floor joints sealed all-round * Stake pockets for square tube stakes approx. 80 x 80 mm, layout according to drawing J9: 8 stake pocket rails (18 stake pockets per rail: 4 each on the outside + 10 in the centre) Front Wall: * Storage for up to 14 square tube stakes approx. 80 x 80 mm (length approx. 1,990 mm) on the inside front wall * Front wall approx. 2,000 mm high, with steel volume corner posts, made from profiled steel sheeting, bolted/riveted to the frame. 2 pairs of lashing rings (permissible lashing capacity approx. 1,000 kg per ring) at the bulkhead according to EN 12640 Side Wall: * VarioFix steel slotted outer frame * 24 pairs of lashing rings on the outer frame (according to EN 12640), permissible tensile force approx. 5,000 kg per ring Bumper Protection: * 1 pair of steel buffer blocks approx. 160x85x85mm mounted on the outer rear frame plate * Transverse zinc-plated s

Condition: excellent (used), Multi-spindle & bar-turning lathes TRAUB TK 42 * Spindle power 5.5 - 9 kW * Maximum workpiece length 206 mm Nkodjwc Aqdopfx Afzjt * Spindle bore 42 mm * Length L - R 2500 mm * Width V - H 900 mm * Height 1700 mm * Tool changer holder 4 slides

Condition: excellent (used), Year of construction: 1991, Multi-spindle & bar turning machines TRAUB TD 26 1991 * Spindle power 2.2 kW * Number of spindles 4 Nksdpfx Afjwc Aqwozjt * Spindle bore 26 mm * Speeds 1.18 > 4750 mm * Total power 3.2 kW * Length L - R 1800 mm * Width V - H 1000 mm * Height 1400 mm * Weight 800 kg * Tool changer 6 tools Additional information * Max. round: 26 mm, max. square: 18 mm, max. hexagon: 22 mm * * Bar loader available

Condition: excellent (used), track width: 360mm shaft width: 350mm max disc diameter: 350mm disc bore diameter: 80mm Nkedpfx Aeu Evqnofzjt max cutting height: 120mm electric lifting of the saw shaft electric lifting of the body smooth regulation of feed speed feed motor: 2,5kW main motor: 45kW

Condition: new, AUMA 07.1-F10 Multi-turn actuator New Nksdpfxov Uaico Afzot -Auftragsnr: 23078028 -NR: 2218NS66675 -PTB 01 ATEX 1119 -SKE0 56-2/80 -Art nr: Z048.703 - AZ F-3-S-ISO-STD

Condition: used, axle configuration: 3 axles, first registration: 02/2008, color: other, Year of construction: 2008, Empty weight: 5.400 kg Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Axle 3: left 8 mm right 8 mm Nedpfx Afow I Apvszokt We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 09/2011, color: other, Year of construction: 2011, Empty weight: 5.100 kg Axle 1: left 8 mm right 8 mm Nedpfjxqfyhox Afzjkt Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 08/2006, color: other, Year of construction: 2006, Empty weight: 5.600 kg Nodpfxow Rn Hfe Afzskt Axle 1: left 6 mm right 6 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 12/2016, color: other, Year of construction: 2016, Empty weight: 5.930 kg Axle 1: left 10 mm right 10 mm Axle 2: left 12 mm right 12 mm Axle 3: left 12 mm right 12 mm Nsdpswzyagsfx Afzokt We have the possibility to stack trailers!

Condition: good (used), Year of construction: 2014, Control FANUC 31i-B Main Spindle Bar Capacity 42mm Main Spindle Speed 7000rpm Main Spindle Motor 29/25kW Main Spindle C axis 0.0001 degree Sub Spindle Bar Capacity 42mm Sub Spindle Speed 7000rpm Sub Spindle Motor 19/16.5kW Sub Spindle C axis 0.0001 degree Sub Spindle Stroke 500mm Sub Spindle Rapid 60m/minute Turret 1 Stations 10 Milling Speed 6000rpm Milling Motor 4.2kW X Axis Stroke 70mm X Axis Rapid 30m/minute Z Axis Stroke 250mm Z Axis Rapid 60m/minute Y Axis Stroke 70mm Y Axis Rapid 15m/minute Turret 2 Stations 10 Milling Speed 6000rpm Milling Motor 4.2kW X Axis Stroke 70mm X Axis Rapid 30m/minute Z Axis Stroke 400mm Z Axis Rapid 60m/minute Y Axis Stroke 70mm Y Axis Rapid 15m/minute Turret 3 Stations 10 Milling Speed 6000rpm Nksdpfx Afsx H R Rtszjt Milling Motor 4.2kW X Axis Stroke 125mm X Axis Rapid 30m/minute Installation Footprint 7612 x 1530mm Weight 5500kg Electrics 57 kW, 68 kVA, 97 A, 400 V, 50/60 H Accessories Gantry work piece discharge unit, Parts Conveyor, Swarf Conveyor. High Pressure Coolant, Manuals, Tool Monitoring, UNIMAG Interface, Iemca Boss 552-HD Magazine Barfeed, Hainbuch Collet Chuck fiited to Main Spindle, 3 jaw chuck fitted to Sub Spindle

Condition: excellent (used), CATALOG NUMBER: 6911 TECHNICAL DATA - Track width: 350 mm - Shaft width: 370 mm - Max cutting height: 200 mm Maximum saw blade diameter: - Upper shaft: 340 mm - Lower shaft: 300 mm - Blade bore diameter: 80 mm From above: - Kickback guards - 2 pressure slip shafts - Pressure unit - Saw shaft 37 kW - 2 smooth slip shafts From below: - Infeed table + guide rail - Kickback guards - Crawler track - Saw shaft 37 kW - Crawler track - 1 outfeed shaft, slip, smooth - Pneumatically pressed rollers - Maximum saw blade diameter: 300 mm - Electric lifting of upper body up/down 1.1 kW - Automatic central lubrication - Electrically controlled stepless feed speed adjustment 3 kW - Extraction nozzle diameter: 230 mm, 250 mm - Dimensions (LxWxH): 3000x2300x1900 mm - Weight: approx. 4500 kg ADVANTAGES – Italian production Njdpfx Ajx Rc Tbofzskt – Twin-shaft – Used multi-blade saw – very good condition Net price: PLN 168,900 Net price: EUR 40,200 Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. width of cant: 870 mm - Min. length of cant: 1500 mm From above: - Pawls - Feed shaft, toothed, metal - Pawls - Feed shaft, toothed, metal - Pressure unit - Shaft with saw blades - 2 feed shafts, metal, pneumatically pressed From below: - Guide Nodpfxjx Rc Rgj Afzjkt - Metal sliding roller - Pawls - Track - Shaft with saw blades - Track - Stepless feed speed adjustment via inverter 4-40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric vertical movement of body up/down: 0.55 kW - Electric adjustment of saw blade shafts: 2 x 0.25 kW - Central lubrication - Extraction nozzle diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg - Centering device included - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 x 1.5 kW - Pneumatic top pressure - Side pressure - Dimensions (L/W/H): 4850 x 1100 x 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech manufacture – Double-shaft design – Centering device – DTR documentation – Year of manufacture: 2010 – Used multi-blade saw, in very good condition Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2010, CATALOGUE NUMBER: 6591 TECHNICAL DATA - Maximum cutting height: 250 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm Nkedox Rc Nvjpfx Afzet - Minimum blade diameter: 300 mm - Maximum blade diameter: 400 mm - Maximum infeed material width: 860 mm - Minimum workpiece length: 1,500 mm * From above: - Kickback devices - 2 pneumatically pressed, metal, toothed feed rollers - Kickback devices - Pneumatically pressed, metal, toothed feed roller - Pressure unit - Saw shaft - Pressure unit - 2 pneumatically pressed, metal, toothed feed rollers * From below: - Metal idler roller - Guide - Kickback devices - Track - Saw shaft - Track - Stepless feed speed adjustment via inverter: 4–40 m/min - Main motors: 2 × 75 kW - Feed motor: approx. 3 kW - Electric body lift (up/down): 0.55 kW - Electric adjustment of saw shafts: 2 × 0.18 kW - Centralized lubrication - Extraction connector diameter: 2 × 300 mm - Dimensions (L × W × H): 3,400 × 2,650 × 2,200 mm - Weight: approx. 7,500 kg ADVANTAGES – Czech manufacture – Double-shaft – DTR technical documentation – Used multi-blade saw, very good condition Net price: 275,900 PLN Net price: 65,690 EUR Net price based on exchange rate 4.2 PLN/EUR (price subject to change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 1997, Technical details: Nkedpjwl Nm Djfx Afzjt number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 8,6 t spindle drive motor: 11 kW

Condition: used, Year of construction: 2015, Technical details: number of spindles: 6 spindle passage: 22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. Nkodexc Idmspfx Afzet *

Condition: used, Year of construction: 1987, Technical details: Nksdpfx Afomf Aw Aszst number of spindles: 8

Condition: used, Year of construction: 2008, Technical details: Nkedpjluhcgsfx Afzet number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 4,5 t spindle drive motor: 11 kW

Condition: excellent (used), Year of construction: 2009, operating hours: 100 h, functionality: fully functional, machine/vehicle number: SKU 102781, overall weight: 1,300 kg, power: 4 kW (5.44 HP), space requirement width: 1,350 mm, space requirement length: 1,520 mm, space requirement height: 1,400 mm, Equipment: rotational speed infinitely variable, The special design of the Multi Grind makes it possible to combine the functions of cylindrical, surface, and tool grinding in a single machine. During external cylindrical grinding, the workpiece can be clamped on one side or supported between centers in the robust tailstock. An internal grinding attachment can also be mounted on the headstock, and even light surface grinding tasks are possible with this model. In tool grinding operations, the Multi Grind allows for precise sharpening of the cutting edges on a wide variety of tools – making it particularly versatile in its application. - External and internal cylindrical grinding - Surface grinding - Tool grinding - Hydraulic table feed - Extensive accessories Nkjdpfx Aexqgi Djfzot