Multi blade saw

SCM M 3

Condition: excellent (used), Catalogue number: 7863 TECHNICAL DATA - Track width: 300mm - Working shaft width: 300mm - Max. disc diameter: 350mm - Disc bore diameter: 70mm - Max. cutting height: 120mm - Table width with extension: 750mm - Table length: 1530mm Dcedpfx Asztaanjagjk - Top: - Kickback barriers (protection against material reversing) - Metal sliding roller - Kickback barriers - Metal sliding roller - Shaft with saw blades - 2 smooth metal sliding rollers - Bottom: - Guide bar - Kickback barriers - Track - Laser - Centralised track lubrication - Infinitely variable feed speed via inverter - Feed motor: 1.5kW - Main motor: 26kW - Brake - Extraction port diameter: 200mm - Overall dimensions (L/W/H): 1700x1400x1600mm - Weight approx.: 1700kg ADVANTAGES - Italian manufacture - Equipped with laser - Very good condition - Used multi-blade saw Net price: 39,900 PLN Net price: 9,500 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary subject to higher exchange rate fluctuations)

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s Dcjdpsyh Hwuefx Aagjk - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Condition: excellent (used), CATALOG NUMBER 7946 Technical Data: - Track width: 300 mm - Working width of shaft: 300 mm - Max. blade diameter: 350 mm - Blade bore diameter: 70 mm - Max. cutting height: 120 mm - Table width with extension: 1030 mm - Table length: 1840 mm – Top: - Kickback protectors (anti-kickback barrier): 2 rows - Metal feed roller, pressure type - Kickback protectors - Metal feed roller, pressure type - Shaft with saw blades - 2 smooth metal feed rollers – Bottom: - Guide rail - Kickback protectors - Track - Laser - Central lubrication of track - Stepless feed speed adjustment - Feed motor: 1.1 kW - Main motor: 18.5 kW - Extraction outlet diameter: 200 mm - Overall dimensions (L/W/H): 1900x1800x1600 mm - Weight: 1770 kg Advantages: – Italian made – With laser – Unpainted – In very good condition – Used multi-blade saw Dodpfxozr U Hte Aageck Net price: 55,900 PLN Net price: 13,300 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 8031 TECHNICAL DATA - track width 300mm - working width of the roller 300mm - max. disc diameter 350mm - disc bore diameter 70mm - max. cutting height 120mm - table width with extension 1030mm - table length 1740mm * from above: - kickback pawls (barrier to prevent material from retracting) 2 rows - sliding roller, metal, pressure roller Dsdpfozha Izjx Aageck - kickback pawls/ratchets - sliding roller, metal, pressure roller - roller with saws - 2 smooth, metal sliding rollers * from below: - guide strip - kickback pawls/ratchets - track - central, electric track lubrication - stepless feed speed adjustment - feed motor 1.1kW - main motor 25kW - dust extraction nozzle diameter 1x200mm, 1x120mm - overall dimensions L/W/H 2550x1800x1450mm - weight 1770kg ADVANTAGES - Made in Italy - Unpainted - Very good condition - Used multi-blade saw Net price: 57900 PLN Net price: 13786 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to larger fluctuations)

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm Dcsdpfx Aorigxysagsk 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: excellent (used), CATALOG NUMBER: 7947 Technical specifications: - Track width: 300 mm - Shaft working width: 300 mm - Max. saw blade diameter: 350 mm - Saw blade bore diameter: 70 mm - Max. cutting height: 120 mm - Table width with extension: 750 mm - Table length: 1540 mm – From above: - Kickback barriers (anti-return block for material) - Metal roller guide - Kickback barriers - Metal roller guide - Shaft with saw blades - 2 smooth metal idler rollers – From below: - Guide rail - Kickback barriers - Track (caterpillar) - Central track lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Main motor: 37 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 1800x1550x1500 mm - Weight: approx. 1700 kg Advantages: – Italian manufacture – Very good condition – DTR technical documentation – Used multirip saw Net price: PLN 33,900 Net price: EUR 8,070 (based on EUR/PLN 4.2) (Prices may change with significant exchange rate fluctuations) Dcsdpfjzh Ixbjx Aagjk

Condition: excellent (used), CATALOGUE NUMBER: 8029 TECHNICAL DATA - track width: 300mm Dcodpfszhbafex Aagjk - working width of the roller: 300mm - max. blade diameter: 350mm - blade bore diameter: 70mm - max. cutting height: 120mm - table width with extension: 760mm - table length: 1540mm * from above: - deflectors (barrier to prevent material from recoiling) - metal feed roller, with pressure - deflectors/pawls - metal feed roller, with pressure - saw arbor - 2 smooth, metal feed rollers * from below: - guide strip - deflectors/pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 1.1kW - main motor: 18.5kW - diameter of dust extraction nozzle: 180mm - overall dimensions (L/W/H): 2250x1450x1600mm - weight: 1570kg ADVANTAGES - Made in Italy - Very good condition - Used multi-blade saw Net price: 36900 PLN Net price: 8786 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Dsdpfx Aov Td Eloagsck Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual ° Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements.

Condition: good (used), Year of construction: 2000, Multiblade tracked SCM M3 4 - Italian production Dcedjg Tdfdspfx Aagjk - year of production 2000 - DTR TECHNICAL SPECIFICATIONS: track width 300 mm cutting height 120 mm engine power 25 kW max. blade diameter 350 mm max. workpiece width 1000 mm min. workpiece length 400 mm adjustable feed on the inverter pneumatically adjustable ruler on the right revolver ruler setting of 6 types three rows of anti-recoil pawls possibility of putting on a board - a shoe spindle diameter 50 mm sleeve diameter 70 mm sleeve equipped with spacers automatic central lubrication four upper pressure shafts spigot diameter 180 mm and 120 mm dimensions of the machine (length / width / height) 210/175/160 cm weight 1800 kg

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 120 mm, cutting width (max.): 300 mm, saw blade diameter: 350 mm, height adjustment type: mechanical, saw blade bore: 70 mm, actuation type: electric, - Operating manual, DTR - Italian production TECHNICAL SPECIFICATIONS: - Track width: 300 mm - Cutting height: 120 mm Dsdjym Ag Sspfx Aagjck - Max. blade diameter: 350 mm - Motor power: 30 kW - Table width: 750 mm - Min. workpiece length: 600 mm - Feed speed adjustable via gearmotor - Three rows of anti-kickback pawls - Possibility to mount a board – shoe - Spindle diameter: 50 mm - Sleeve diameter: 70 mm - Sleeve equipped with spacers - Automatic central lubrication - Four upper feed rollers - Extraction port diameter: 200 mm - Machine dimensions (L/W/H): 155 / 165 / 160 cm - Weight: 1800 kg

Condition: used, Year of construction: 2008, without briquetting press Filter area 32 m² Dcodpfxovxlqmo Aagjk with funnel transition to container or connection to rotary valve used, top condition, little used Brand Schuko Type Vacomat 300 Year of manufacture 2008 Clean air device / negative pressure GS dust-tested BIA-tested CE type-tested Motor 7.5 kW Connection diameter 300 mm Pressure pa. 3090 Air output 5800 m³/h Control Filter pressure monitor Extinguishing device powder extinguisher New price approx. 17,000.00 EUR Space requirement approx. 3600 x 1590 x 2550 mm / 4400 without funnel Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: excellent (used), CATALOGUE NUMBER 8028 TECHNICAL DATA - track width 300mm - working width of the roller 300mm - max. disc diameter 350mm - disc bore diameter 80mm - max. cutting height 120mm - table width 750mm - table length 1540mm * from above: - pushers (barrier protecting against material kickback) - sliding roller, metal, pressure roller - pushers/pawls - sliding roller, metal, pressure roller - roller with saw blades - 2 smooth, metal sliding rollers * from below: - guide rail (pneumatically adjustable) - pushers/pawls - track - central track lubrication - stepless feed speed adjustment - feed motor 1.1kW - main motor 25kW Dcedpozmfr Ajfx Aagsk - dust extraction nozzle diameter 1x200mm, 1x120mm - overall dimensions L/W/H 2430x1530x1450mm - weight 1540kg ADVANTAGES – Made in Italy – Guide rail – pneumatically adjustable – Very good condition – Used multi-blade saw Net price: 38900 PLN Net price: 9262 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Dcsdpfxohp Rc Ie Aagjk Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: good (used), Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Dcjdpfx Asvu U Itjagek Remote control with digital read-out Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Second-hand machine Features and technical specifications: High-performance multi-blade saw Heavy-duty grey cast iron construction Robust conveyor chain consisting of precision links connected directly to one another Dodpfx Aajzk N Ucjgock Wear-resistant guide surfaces on the conveyor chain with an extremely low coefficient of friction Automatic chain lubrication Quadruple saw shaft bearing arrangement for maximum stability Saw sleeve with conical seat and self-centring 4 pressure rollers for precise cuts even with thin workpieces 4 rows of slitter and return fingers Cutting height up to 110 mm with a 350 mm saw blade diameter Min. cutting length 250 mm Clamping width of the saw sleeve 300 mm Min. and max. saw blade diameter 200/350 mm Saw shaft speed 4,200 rpm Feed speed 4–48 m/min Conveyor chain width 300 mm Saw chuck diameter (with 2 wedges 20 x 5 mm) 70 mm Workbench height 750 mm Extraction connection diameter 200 mm Air flow rate at 25 m/s: 3,500 m³/h Motor 25 kW Feed motor 1.1 kW with laser alignment beam 1,800 kg Sound emission 98.3 dB W(A) at idle without extraction during operation 107.1 dB W(A) Workplace-related emission level 81.8 dB W(A) at idle without extraction during operation 91.2 dB W(A) Availability: at short notice Storage location: 63934 Röllbach