Used Neon Sign for sale (4,494)

Condition: excellent (used), Emergency exit sign, escape route light, emergency and escape route lighting, emergency lights, escape routes, emergency lighting -Manufacturer: Ceag, Cooper Safety LED emergency exit sign with 3 pictograms, unused, original packaging -Type: SV EURO 1-3/D -Connection: 230 V Hodpfxszmubye Ac Tsr -Cardboard dimensions: 360/220/H110 mm -Weight: 1.8 kg

Condition: excellent (used), Emergency exit sign, escape route light, emergency and escape route lighting, emergency lights, escape routes, emergency lighting Hsdpfjcpnmcex Ac Ter -Dimensions: 380/190/H90 mm -Connection: 230 V -Number: 11 lights available -Price: per piece -Weight: 1.9 kg/piece

Condition: excellent (used), Emergency exit sign, escape route light, emergency and escape route lighting, emergency lights, escape routes, emergency lighting -Dimensions: 340/140/H80 mm -Connection: 230 V Hjdpfscuh Enjx Ac Tor -Number: 1x light available -Weight: 1.0 kg

Condition: used, For sale: a word and figurative trademark, registered with the Patent Office of the Republic of Poland. Nice classification: 29: preserved, canned, frozen, dried, and cooked fruits and vegetables; vegetable salads; fruit pulp; candied and glacé fruits; fruit salads; 30: tarts, cakes, and pastries with fruit; fruit flavorings for cakes, other than essential oils; mustard; ketchup; mayonnaise; sauces; seasonings; fruit teas; Hedszcuhtopfx Ac Tjr 32: fruit juices and nectars; vegetable juices; non-alcoholic beverages made from fruit and vegetable juices; non-alcoholic extracts and extracts from fruits and vegetables; carbonated and non-carbonated beverages.

Condition: used, machine/vehicle number: MPK5000, functionality: unexamined, Used Neon invitrigen Transfection System with Pipette holder. Hjdpfx Ajxp I Thec Tjr Manufacturer: Life Technologies Model: MPK5000 Voltage: 100-240V (50/60Hz)

Condition: new, functionality: fully functional, This listing is for information purposes only and does not constitute a legally binding offer. The WARRANTY applies exclusively to machines purchased DIRECTLY from us, not from other dealers. KINGWAY DEUTSCHLAND is the only authorized stationary specialist dealer for the Kingway brand on the German market, with its own dedicated service department. ORDER YOUR MACHINE FROM A DEALER OPERATING NATIONWIDE ACROSS GERMANY! WHEN PURCHASING FROM US, YOU ARE GUARANTEED SERVICE AND THE POSSIBILITY TO MAKE WARRANTY CLAIMS – UNLIKE WITH OTHER DEALERS. Model: ZL918 Neon Operating weight: 4,150 kg Max. load capacity: 1,800 kg Bucket capacity: 0.65 m³ Dumping height: 2,850 mm 4-cylinder diesel engine: 36.8 kW / 2,200 rpm Hydraulic pressure: 16 MPa Steering angle: ±35° Turning radius: 4,500 mm Tyres: 20.5 / 70-16 Ground clearance: 200 mm Travel speed: 28 km/h Dimensions: 5,050 x 1,750 x 2,520 mm FEATURES: - Exceptionally high-quality and robust build - Lockable cab, fuel tank, and engine hood - Heating / ventilation - Rear-view camera - Spacious comfort cab - Easy handling - Highly maneuverable - Compact and versatile - Fully road-compliant lighting system - Hydraulic quick-coupler system - Dedicated hydraulic circuit for attachments - CE certified according to the latest standards and directives Hodjyk Sngspfx Ac Tjr - Purchase possible WITHOUT VAT (only with valid VAT ID) - FINANCING available SCOPE OF DELIVERY: - FREE delivery within a 200 km radius - Wheel loader / yard loader ZL918 NEON - Including 4-in-1 bucket + pallet forks - Hydraulic quick coupler - Joystick control - 4x4 all-wheel drive - Float position For each of our loaders, you can additionally order: - Tow bar, - Counterweights, - Any type of accessory, such as push brooms, grapple buckets, snow ploughs, high-volume buckets, sweepers, grab buckets. PRICE: EUR 20,000 net EUR 23,800 gross

Condition: new, New shields for machine tools produced by TOS/INTOS ŽEBRÁK of the FN, FNG, FNGJ and FNGP series. Hedpfsr Nbp Ajx Ac Ter

Condition: used, functionality: fully functional, SummaSign Pro D1010 Cutting plotter Hjdpfxsrzbp Ro Ac Tjr Good working condition. Please check out our other listings as well.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 1,100 mm, total length: 3,000 mm, total height: 720 mm, number of drawers: 3, This offer is for used high-quality designer office furniture in good condition. Delivered in 2023, the items are generally in very good condition due to minimal use. Monitored price as reference for 1x Vitra wire chair incl. cushion 6x Vitra wire chairs DKR + soft seats outdoor typ C -Poweder coated -Wire base in Basic Darf (smooth) -Glides fitted -Soft seats outdoor Tyoe C cushion -Non-slip coating on one side -Cover: Simmons 53 white / steel blue -Incl. original invoice new price 391,-€ each set -Price ex works 251,-€ each set 1x Johansen Design conference table incl. 9x Menu leather designer-chairs swing Table: -Discus Conference 300x110 cm Hedpezqr Ifefx Ac Tsr -F5150 MAT American Walnut, clear-lacquered MDF -Madison T XL base, design by Alexander Lervik 9x Chairs: -Menu Harbour Chair Star Base with Swivel Return (swivel chair with self-centering mechanism) -Upholstery Family: Dunes Sørensen Leather, Color 21000. -Incl. original invoice new price 14.648,-€ complete -Price ex works 8.310,-€ complete 1x set Vitra Bistro Table / High Table (EN 15372 Level 3) + Menu Chairs -Dimensions: Diameter 796 mm x 1100 mm -Round tabletop -Indoor base -Certified to EN 15372 Level 3 -incl 3x Menu Co Chair, bar chair -Incl. original invoice new price 1.131,-€ complete -Price ex works 579,-€ complete Prices may vary slightly depending on the quantity purchased. We would be happy to provide you with a tailored quote. You may also purchase individual pieces of furniture separately. Condition: This offer consists of used furniture, which may show signs of wear (such as minor scratches or yellowing). Packaging and Shipping: You are welcome to view the items during our business hours; please schedule an appointment to do so. Seaworthy packaging and worldwide shipping are available upon request. Please feel free to contact us directly for further information.

Condition: good (used), Year of construction: 1997, operating hours: 30,475 h, functionality: fully functional, machine/vehicle number: 8277, total height: 3,355 mm, total length: 6,200 mm, total width: 3,920 mm, input voltage: 400 V, type of input current: three-phase, UNISIGN CNC bed milling machine UNIVERS 5, year of manufacture 1997 Control system: Siemens 810 MGA 3 X-axis travel: 4000 mm Y-axis travel: 750 mm Z-axis travel: 400 mm Feed rate: 5 - 28,000 mm/min Rapid traverse rate X-axis: 28,000 mm/min Hsdpfxsylbf Ro Ac Tor Rapid traverse rate Y-axis: 28,000 mm/min Rapid traverse rate Z-axis: 28,000 mm/min 51 tool changer positions SK 40 DIN 69871 A / ISO 7388-1 T-slots 1 x 18H9 / 4 x 18H12 T-slot spacing: 130 mm Maximum table load: 1,000 kg 400V / 3 phases / 50Hz / 60A Power consumption: 40 kW Air pressure: 6 bar - 20 ltr/min Number of leveling elements: 8 pieces Operating hours: 30,475 hours Dimensions: 6200 x 3920 x 3355 mm Weight: 12,000 kg

Year of construction: 1998, condition: ready for operation (used), A Unisign CNC 5-axis large-format portal milling machine is available. Portal clearance height: 1200mm, tool stations: 35/53, tool interface: SK50, travel X/Y/Z: 10000mm/2000mm/800mm, table dimensions X/Y: 11750mm/1670mm, max. table load: 2500kp/m², max. table-to-spindle nose distance: 1200mm, main spindle power: 26kW, spindle speed: 6000rpm, feed rate: 24m/min, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 14000mm/5800mm/4000mm, weight: approx. 45t, control: Siemens Sinumerik 840C. Including automatic angular milling head coupling and decoupling, spindle orientation system, rigid tapping, through-spindle coolant, workpiece probing system and two-station pendulum operation. Documentation available. An on-site inspection is possible. Hsdpfx Aezpyw Eec Tsr

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: limited functionality, working width: 1,800 mm, type of input current: three-phase, total width: 2,400 mm, total length: 2,000 mm, total height: 2,200 mm, overall weight: 2,300 kg, additional equipment features: Complete with 6 de-reeling stations, Following consultation over 5 years with major UK manufacturers, production units, including working within factory which builds these machines, this machine was commissioned and built for experimental works to enable proof of concept for UK Government / Ofgem. This machine is built with steel welded frames to robust industry standards and fitted with 202mm diameter mandrel. Other mandrel sizes can quickly and easily be fitted. Six robust steel framed de-reeling stands – on wheels - are included, Hjdpezma E Djfx Ac Tjr A steel framed deluge system is included. An alternative individual application system by manifold of a new, unused Grunfeld GRS 5 - One component dispense system, can be included if required, enabling glue supply to individual reels. The electronic controller is by Hartec Control systems, with infinite capstan speed control. Current equivalent machines by Spiraltech start at over £100,000 ! Capstan angle manual control is industry tradition, as once set, no adjustment is needed. Approx 10 paper reels are supplied FOC for pretest alignment. Specially incorporated accessible gearbox readily disconnected from motor. Brand new electric 3 – phase motor with less than 10 hours useage. Selection of forming belts to suit differing materials.

Year of construction: 2016, condition: like new (used), functionality: fully functional, BÖHL JUNIOR S 450 VA fully automatic packaging machine / wrapping machine for spirally wrapping long goods with packaging material (typically stretch film) Product dimensions • Width: 15 – 220 mm • Height: 15 – 120 mm • Length: approx. 600* / 800 mm to 6,000 mm • Weight: approx. max. 3,000 kg / 6 meters including carriage - maximum cross-sectional diagonal of the product: 220 mm (customer-specific) Note: max. weight only possible if transferred with a powered, in-house conveyor system. (A) 600 mm* without carriage (B) 800 mm with carriage or distance between carriages min. 600 mm Packaging materials • PE stretch film, thickness approx. 17 – 50 μm (recommended 23 μm) • Roll diameter max. 400 mm • Roll width max. 125 mm • Core diameter 76 mm Specifications • Wrapping ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency-controlled) Technical data • PLC control Siemens S7 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 7 kW • Pre-fuse 35 A • Noise level 75 db (A) • Operating pressure 6 bar • Air consumption approx. 20 standard liters per cycle Technical section • Packaging material feed and mechanical pre-stretch system for 125 mm • Automatic clean-cut cutting unit for the packaging material • Electromotoric height adjustment of the wrapping ring • Automatic height detection of the product via light barriers • Packaging material tear and end detection • Pneumatic pressure rollers on the infeed and outfeed sides • Powered transport rollers on the infeed and outfeed sides in the machine • Quick-change device for packaging material rolls • Manually adjustable side guide plates as side centering in the infeed • SIEMENS frequency inverters for wrapping ring drive and feed • Complete electrical control, SIEMENS PLC S7 with touch panel • 2 m powered conveyor system with PU-coated rollers in the infeed area • 2 m powered conveyor system with PU-coated rollers in the outfeed area Packaging program - the following packaging programs are included: Wrapping - the product is wrapped along its entire length. Hjdpszn Ipyefx Ac Ter Multiple layers are wrapped at the beginning and end of the product (edge protection). The overlap of the film during wrapping can be adjusted using a frequency inverter. Wrapping with intermediate bandages - the bundling points are activated by means of a timer. The product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product. In addition, stability bandages are wrapped. The transport is stopped after adjustable distances, and layers are wrapped in place for an adjustable time. The overlap of the film during wrapping can be adjusted using a frequency inverter. This program may eliminate the need for strapping bands in some cases. Bundling - the bundling points are activated by means of a timer. The product is not wrapped along its entire length. Film bandages are wrapped, and the number of layers per bundling point is adjustable. The distance between the bundling points can be preset via the timer. Continuous transport without wrapping Machine dimensions (without safety fence): • Length: 1,930 mm • Width: 1,500 mm • Height: 2,200 mm • Conveyor height: 900 mm • Machine weight approx. 1,600 kg Operating side: on the right in the direction of transport Paint: machine RAL 7032, gray The system is in VERY GOOD technical and optical condition.

Condition: good (used), Hazard lights, night markings, flashing lights, day/night markings -Signal lights for: Wind turbines Hjdpfxofkph Us Ac Ter -GF light: RE-LED 864 (Red) -Housing: aqua signal -Price: per piece -Quantity: 2 pieces -Dimensions: 380/356/H290 mm -Total weight: 15 kg

Condition: used, SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. SIGNODE automatic Strapping: Machine Model M400/PA/TSM for vertical strapping Pneumatic strapping floating head: for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness 450 kg. jumbo coil dispenser: with electrical unwinding Switchboard: Included Hodswxxz Repfx Ac Ter

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, overall weight: 9,000 kg, table length: 825 mm, table width: 625 mm, controller model: 21i MB, Travelling Bridge CNC Vertical Machining Centre Table size (2) 825 x 625 mm. Hjdpfxezavlus Ac Tjr Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), machine/vehicle number: 71080, Available: immediately Hjdpoh Ek U Defx Ac Ter

Condition: used, Year of construction: 1998, Format: 1100 x 900 mm Equipment: W 1100mm x L 900mm Max format W 90mm x L 50mm Min format 200-800gsm plus capable to run E/F Flute Hodpfx Aezg Icdec Tsr Longitudinal seam bonding double longitudinal seam bonding

Condition: used, Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens 810 D, total length: 6,500 mm, total width: 3,500 mm, overall weight: 9,000 kg, spindle speed (max.): 9,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis vertical machining center from Unisign, model Univers 4, year of manufacture 2004. The machine is used but in good condition, fully functional, and has been regularly maintained. Special feature: second milling spindle (replacement spindle included). Operating hours: 19,357 Technical Data -Traverse paths: X = 1600 mm / Y = 400 mm / Z = 400 mm -B axis: A axis (360° x 0.001°) 20 rpm -Spindle speed: 0 – 9000 rpm -Control: Siemens Sinumerik 810D -Table size: 1 bridge with 4 sides, L 1800 mm, 4 x 113 mm -Table load capacity: approx. 150 kg -Working feed rate: 5 – 28,000 mm/min -Rapid traverse (X/Y/Z): 28,000 mm/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 44 stations -Tool diameter: approx. 70 mm (up to 200 mm with free adjacent slots) -Max. tool length: approx. 240 mm -Max. tool weight: 5 kg -Max. total weight of tool magazine: approx. 200 kg -Tool change time: approx. 8 sec Machine Requirements & Dimensions -Total power requirement: 14 kW -Machine weight: approx. 9000 kg -Footprint (LxW): approx. 6.5 x 3.5 m Equipment & Accessories -Coolant system (approx. 480 L, internal & external emulsion) -Clefil RBF-E100 20 bar pump unit -Chip conveyor -Rinse gun in machining area -Hydraulic/pneumatic clamping options in machining area -Enclosed work area cover in accordance with safety regulations (UVV) -Röhmheld hydraulic aggregate (max. 500 bar) -Automatic probe RWP20.00 -Various SK40 holders -Technical documentation & floor plan available Maintenance -Regular maintenance performed -Hydraulic and pneumatic hoses partially renewed -LT module replaced in control cabinet The machine is immediately available and ready for operation. If interested or if you have any questions, please get in touch! All information provided to the best of our knowledge and belief. Subject to change, error, and prior sale. Hjdpfx Acex Iputs Tor

Condition: excellent (used), Year of construction: 1980, - saw - moulder - thicknesser planing width 210mm planing height 120mm Hodpfxop Sugfj Ac Tor tool change is done by changing the position of the belt.

Condition: ready for operation (used), Year of construction: 2004, Pack press Signode with plastic strapping Hedpfozca Uxox Ac Tjr

Year of construction: 1978, condition: used, 1,2 t, Coil OD 1.650 mm Hjdpfx Acotn Die Tjr 20 - 300 x 0,4 - 3,5 mm

Condition: ready for operation (used), Year of construction: 2010, operating hours: 55,000 h, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 36,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, number of axes: 3, This 3-axis Unisign uniport 6000 gantry milling machine was manufactured in 2010. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 1,000 mm. The machine is equipped with a powerful 36 kW main drive and a 30-pocket automatic tool changer. If you are looking to get high-quality milling capabilities, consider the Unisign uniport 6000 gantry milling machine we have for sale. Contact us for further details. • Space requirement: approx. 12 x 11 m • Passage: height 1,000 mm / width 1,500 mm • Max torque: 720 Nm • Gearbox: 2-stage, ratio 1:4 • Machining capacities (C45): drilling 120 mm dia / tapping M55 / milling 100 cm³/min Hjdpfx Acoy A Ifms Tor • Construction: Gantry design with movable portal bridge and stationary clamping table • Table configuration: Clamping bars in transverse direction with 750 mm spacing (standard plate fields omitted) • Tool changer: Automatic tool change; 30-pocket chain magazine on the portal column (capable of tool change into the angular head) • Operation mode: Pendulum machining capability • Cooling: Machine cooling unit; water-air heat exchanger integrated into the control cabinet • Coolant system: Operated dry; pre-fitted/ready for coolant use • Maintenance status: Tool magazine and X1/X2 ball screws completely overhauled in 2023; last manufacturer maintenance in 2023 • Installation: Machine recessed and anchored in a foundation pit Additional equipment • Angle boring and milling head, 1 unit, 4,000 rpm, SK50, with Hirth coupling for high accuracy and stability; plus 1 spare unit • Probing: RWP20.50-M probe; plus 1 spare Hexagon RWP 20.50-M probe • Hydraulic clamping device with clamping bridges for axis machining, including hydraulic unit • 1x T-slot clamping field (2500 x 1200 mm) as an alternative to the hydraulic fixture • Chip conveyor: Hinged belt type • Safety fence with Sick light grids • Makrolon curtains on both sides of the bridge (motorized height adjustment) • Separation wall with viewing window • Setup and leveling elements • Diverse spare parts • Documentation included Technical Specification Taper Size SK 50

Condition: used, Year of construction: 2021, UV curing oven in operational condition. Possibility for 2 units. Hsdoy Nzb Uspfx Ac Tjr Ask for a quotation!

Condition: used, Year of construction: 1996, x-travel 3000 mm Hedpfx Acoud Ixle Tjr y-travel 1500 mm z-travel 400 mm Serial number 7872 chip conveyor MAYFRAN 40.6GS-HR/SP20 control SIEMENS SINUMERIK 820 table surface area 3000 X 1500 mm table load 1000 kg / m2 Tool changer 52 stck. weight of the machine ca. 15000 kg UNISIGN - Uniport 4 - Machining centre - Vertical Technical details will be added shortly 40820 operating hours including chip conveyor from the manufacturer MAYFRAN with TYPE 40.6GS-HR/SP20 Total weight: 15,000 kg