Used New Bandsaw for sale (20,371)

Condition: used, Year of construction: 2003, Conveying equipment Gbsdoxta T Uopfx Am Esw NEW Omap Year of manufacture 2003

Condition: used, Year of construction: 2004, Hydr. reversing Bale size 0.8 - 180 m / Gbedorxta Eepfx Am Esw

Condition: used, Year of construction: 2015, front tire size: VF600/60R30, rear tire size: 650/65R42, Equipment: compressed air brake, front power take-off, front-end loader, Front loader Alö Quicke Michelin tires / Gjdstncb Ijpfx Am Eebw

Condition: new, New Curved Conveyor Outer dimensions 2800mm x 1400mm Belt width 200mm approx Complete with control panel Variable speed control Gbedpez E Nfbefx Am Eow Stop / start E - stop Reset facility 230 volts, single phase power

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, cutting angle (max.): 30 °, machine/vehicle number: M3378, For sale: large band saw for soft materials. Outreach: 1.25 m, allowing you to cut through material up to 2.5 m wide. Gbjdpfxszfwfxs Am Eew Cutting height: approx. 90 cm. Cutting length: approx. 2.3 m. The upper part can be tilted electrically to the left and right up to 30 degrees, making this a special sawing machine. Well-maintained machine with few operating hours. Fecken Kirfel – German quality. Installation and adjustment can be arranged upon request.

Condition: excellent (used), Year of construction: 2022, operating hours: 50 h, ABB Multimove 2*IRB1200-5/0.9 + IRC5 Multimove controller + TPU, as new DEVELOPMENT OF GSG ROBOTICS Gbodpfxjz Tadlj Am Ejw GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, providing comprehensive service for robot maintenance and repair. Over the years, we have developed into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control Gjdpfx Aoyug R Rem Ejbw enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Year of construction: 2025, condition: ready for operation (used), A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible. Gbjdpfx Amowihz Is Eow

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2026, total length: 13,600 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 245/70R17.5, wheelbase: 6,470 mm, = Additional Options and Accessories = - Lifting axle - Air suspension = Notes = Pezzaioli SBA31 SR 1st registration: ZFJSBA31USM009112 Unladen weight: 13,500 kg Lifting axle Lifting roof Gjdozpx Atopfx Am Eobw Hydraulic floor 3 + 4 levels Loading lift NEW Dutch registration: OX-49-HD = Further Information = General Information Year of construction: 2026 Registration number: OX-49-HD Axle Configuration Tire size: 245/70R17.5 Rear axle 1: Double tires; Lifting axle; Max. axle load: 9000 kg; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Rear axle 2: Double tires; Max. axle load: 9000 kg; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Rear axle 3: Double tires; Max. axle load: 9000 kg; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Weights Unladen weight: 13,500 kg Payload: 25,500 kg GVWR: 39,000 kg Maintenance, History, and Condition APK (Technical Inspection): Valid until 07/2027 Technical condition: good Optical condition: good Further Information Please contact VAEX The Truck Traders for further information.

Condition: excellent (used), Year of construction: 2020, operating hours: 200 h, ABB IRB360 Picker + IRC5 Compact controller, 2nd generation + TPU, as new DEVELOPMENT OF GSG ROBOTICS Gsdoz Taggopfx Am Eobw GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a holistic partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: used, maximum load weight: 33,169 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2012, next inspection (TÜV): 11/2027, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, total length: 14,000 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2012, Additional information: Godpfxo Akam Re Am Eebw * Type | First axle: Michelin R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 30% * Tire tread depth inner right | First axle: 30% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Michelin R * Type | Third axle: Michelin R * Tire size | Second axle: 385/65 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire tread depth inner left | Second axle: 30% * Tire tread depth inner left | Third axle: 30% * Tire tread depth inner right | Second axle: 30% * Tire tread depth inner right | Third axle: 30% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Price on request: Yes * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Lift axle | Third axle: Yes Additional features: * Rear doors * Homepage * Tail lift * Lift axle * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.

Condition: used, Metal-cutting bandsaw Manufacturer: Mössner Type: Rekord Technical data: Saw blade speeds: 12–750 m/min Condition: used Accessories, tools, and clamping devices shown are included in the scope of delivery only if this is explicitly stated in the additional information. Gbsdpfxj Ai T Tge Am Eow Subject to modifications, errors in technical data and specifications, and prior sale!

Condition: excellent (used), Year of construction: 2022, operating hours: 10 h, ABB IRB 1200-5 /0.9 + Controller + TPU DEMO ROBOT, as new Godpoz Taf Asfx Am Eobw DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, offering a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: new, mileage: 1,000 km, power: 397 kW (539.77 HP), first registration: 11/2026, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: black, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 6,240 mm, loading space width: 2,470 mm, loading space height: 790 mm, Equipment: ABS, central locking, cruise control, parking heater, soot filter, = Additional options and accessories = - Front work lights - High beam headlights - Enclosed cab - Cab - Refrigerator - Air suspension - Particle filter - Sun visor - Auxiliary heater - Power take-off (PTO) = Notes = Volvo FH540 Aero 6x2*4 - HMF crane 4020 K6 - NEW! - Winch - 4x outrigger - Fly jib preparation 70,000 kg GTW Year of manufacture: NEW - Not yet registered Mileage: 1,000 km 10,000 kg front axle Full air suspension Steering axle Alcoa Dura-Bright wheels I-Shift Veb + Dynamic steering I-ParkCool Leather seats Refrigerator 1 bed HMF crane 4020 K6 Winch 2,500 kg Fly jib preparation Extra function Remote control 4 hydraulic outriggers Open box with aluminum side panels = Further information = General information Year of construction: 2026 Cab: Globetrotter Transmission Gearbox: I-Shift, 12 gears, automatic Axle configuration Suspension: Air suspension Front axle: Light alloy rims; Max. axle load: 10,000 kg; Steered; Tire tread depth left: 100%; Tire tread depth right: 100% Gsdo Ah Eg Hopfx Am Ejbw Rear axle 1: Twin tires; Light alloy rims; Max. axle load: 11,500 kg; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Rear axle 2: Light alloy rims; Max. axle load: 7,500 kg; Steered; Tire tread depth left: 100%; Tire tread depth right: 100% Weights Unladen weight: 18,920 kg Payload: 10,080 kg GVW: 29,000 kg Functional Mast: Telescopic Body manufacturer: HMF 4020 Condition Overall condition: very good Technical condition: very good Optical condition: very good

Condition: new, Year of construction: 2016, functionality: fully functional, cooling capacity: 28 kW (38.07 HP), type of input current: three-phase, type of cooling: air, overall weight: 281 kg, input voltage: 400 V, total width: 540 mm, total length: 1,470 mm, total height: 1,610 mm, warranty duration: 12 months, heating capacity: 26 kW (35.35 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 30 28/26 kW Cooling capacity: 28 kW / 7.96 tons (12/7 — 35°C) Heating capacity: 26 kW / 7.39 tons (40/45 —7°C) Year of manufacture: 2016 Options: Hydralic module. Heat pump Hydraulic module: 1 pcs. water pump (EBARA) Heat exchanger: Plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Mitsubishi (scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1,47 x 0,54 x 1,61 m Weight: 281 kg Working hours: 3 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Gbodpfxey Enrrj Am Esw The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2022, operating hours: 10 h, ABB IRB 1300-7 /1.4 + Omnicore C90XT + TPU DEMO ROBOT DEVELOPED BY GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Gjdpfx Aoz Tacuom Ejbw

Condition: like new (used), Year of construction: 2008, operating hours: 12 h, functionality: fully functional, warranty duration: 12 months, Cold Jet Aero 75 DX Machine is like new. Check out our other listings. DrDryice This machine is suitable for industrial cleaning, including large-scale projects. An advantage of this machine is that it does not contain the latest generation of electronics. It is one of the most powerful machines on the market and is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine, complete with the following equipment: Gbjdpfx Aswg R Edsm Eew COLD JET AERO 75 DX DRY ICE (12 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Coldjet Applicator 2 x Nozzles, NEW This is one of the best machines in the world. It has no electronics, which is why it is reliable and not expensive to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. We also offer repairs and maintenance for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Horizontal thin-cutting band saw 400 mm working width New 2024 model with bigger wheels and inverters on wheels. Gbedpfe Ahidkex Am Esw Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm

Condition: new, Year of construction: 2024, For sale: 3 brand-new, unused SEW-EURODRIVE ATEX explosion-proof helical-bevel gear motors, manufactured in Germany in 2024. Suitable for industrial applications in potentially explosive gas and dust environments, subject to the applicable ATEX installation requirements. Technical specifications: * Manufacturer: SEW-EURODRIVE * Type: KAZ57/II2GD EDRN80M4/2GD/AL * Year of manufacture: 2024 * Quantity available: 3 units * Condition: New, unused * Motor power: 0.75 kW * Frequency: 50 Hz * Voltage: 380–420 V Δ / 655–725 V Y * Motor speed: 1,440 rpm Gsdpfx As Ai Sm Rjm Ejbw * Output speed: 13 rpm * Gear ratio: 108.29 * Output torque: 540 Nm * Efficiency class: IE3 * Protection class: IP65 * Weight: approx. 42.9 kg per unit * Mounting position: M1–M5B / 15° * Ambient temperature: -20°C to +40°C * Country of manufacture: Germany ATEX specifications: * Gas: II 2G Ex eb IIC T3 Gb * Dust: II 2D Ex tb IIIC T120°C Db * ATEX motor certificate: PTB 10 ATEX 3026/47 Included: * SEW-EURODRIVE gear motor * Operating and assembly instructions * ATEX documentation * Accessories as shown in the photographs Price: On Request Please contact us with your required quantity for a quotation. Location: Rotterdam, The Netherlands Delivery terms: EXW Rotterdam Surplus stock – sold as is, where is, without warranty, claims, or returns.

Condition: new, Year of construction: 2017, functionality: fully functional, cooling capacity: 16 kW (21.75 HP), type of input current: three-phase, type of cooling: air, overall weight: 227 kg, input voltage: 400 V, total width: 700 mm, total length: 1,100 mm, total height: 1,400 mm, warranty duration: 12 months, heating capacity: 18 kW (24.47 HP), Aircooled chiller/heat pump Blue Box Epsilon Echos 16 kW / 18 kW Cooling capacity: 16 kW (12/7 — 35°C) Heating capacity: 18 kW (40/45 — 7°C) Year of manufacture: 2017 Gedpfxsx Uyf Ao Am Ejbw Options: heat pump Heat exchanger: plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Siam ( scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1.10 x 0.70 x 1.40 m Weight: 227 kg Working hours: 268 h Condition: excellent, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2019, Used automatic band saw PEGAS 230x280 A-CNC-R Blade dimensions: 2720x27x0.9mm Gbsdj Af Ur Djpfx Am Eow Cutting angle up to 60° Blade speed from 20 to 100 m/min Cutting capacity at 0°: round 230 mm, rectangular 280x200 mm Year of manufacture: 2019

Condition: used, axle configuration: 3 axles, first registration: 10/2026, loading space length: 13,590 mm, loading space width: 2,500 mm, loading space height: 3,640 mm, total length: 13,820 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 100 %, color: white, Equipment: ABS, tail-lift, General Information Year of Manufacture: 2026 Axle Configuration Tire Size: 385/65R22.5 Tire Tread Depth: 100% Rear Axle 1: Reduction: single reduction Rear Axle 2: Reduction: single reduction Rear Axle 3: Reduction: single reduction Gbjdpfxo Akbx Ts Am Esw Weights Unladen Weight: 11,100 kg Payload: 30,900 kg GVWR: 42,000 kg Functional Features Tail Lift: Multi Deck 2500 kg Body Manufacturer: Burgers Condition Damage: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and meet the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, Radial fan REITZ, Type: MAE Manufacturer's No. 601475, Year of manufacture 2017 Volume flow rate 4260 m³/h = 71 m³/min. Pressure p 1.2 kg/m³ Air inlet Ø 250 mm (flange diameter in the base plate) Air outlet 245 x 195 mm Motor speed 2915 rpm Motor power 7.5 kW Mains connection 400 Volts 50 Hz - Fan impeller with 9 fan blades - Directly flanged drive motor - Flange dimensions for air outlet 310 x 260 mm - Sturdy metal housing made of 5 and 6 mm steel Space requirement L x W x H 1390 x 1030 x 600 mm Weight of radial fan 200 kg Very good condition, only test run completed. Gsdpfs Ah Ig Dsx Am Esbw

Condition: new, Year of construction: 2025, For sale: brand new / unused ZEISS Primovert inverted phase contrast microscope, supplied as a complete factory-configured kit in the original ZEISS packaging. This is one of 5 identical new Primovert units available. The complete configuration includes: ZEISS Primovert microscope stand, ref. 415510-1100-000 - Binocular tube - 4-position objective turret - Specimen stage 200 x 239 mm with metal stage insert - Binocular tube 45°/20 - Eyepieces 10x/20 Br. foc. - External power supply 100-240 VAC / 50-60 Hz - Dust cover - Original accessories and documentation ZEISS LD Condenser 0.4, ref. 415510-1700-000 - Working distance 55 mm - Suitable for objective magnifications of 4x to 40x Objectives included: ZEISS Plan-Achromat 4x/0.10 Ph0 Ref. 415500-1619-000 Working distance 12.0 mm ZEISS Plan-Achromat 10x/0.25 Ph1 Ref. 415500-1605-001 Working distance 4.4 mm ZEISS LD Plan-Achromat 20x/0.30 Ph1 Ref. 415500-1614-000 Working distance 4.6 mm at D=1 mm ZEISS LD Plan-Achromat 40x/0.50 Ph1 Ref. 415500-1617-000 Working distance 2.7 mm at D=1 mm Phase contrast components included: Phase annulus Ph 0/0.4, ref. 415510-1810-000 Phase annulus Ph 1/0.4, ref. 415510-1811-000 3-position phase slider, ref. 415510-1805-000 Also included: ZEISS LED illumination for Primovert Ref. 415510-1201-001 Condition: New / unused The microscope is supplied in its original ZEISS box with original protective foam, documentation, and accessories. The unit has not been used in a laboratory setting. 5 identical units available. Available immediately from stock in Belgium. Worldwide shipping available. Please contact us for additional information, pictures, shipping quotation, or a formal offer. Gbedjz E A Hfspfx Am Ejw

Condition: like new (used), Year of construction: 2026, Flexible horizontal band resaw with tiltable conveyor Modern resaw with impressive features : Cast iron dynamicly balanced wheels Hydraulic blade tension Inverter controlled feed system Automatic pressurised lubrication system with reservoir tank External control panel 22.0 KW motor - latest IE-3 energy efficient motor Gbodpo Ahidcofx Am Ejw Tilting conveyor up to 45 degrees * very suitable for shiplap cladding, wall cladding * Maximum material size (W X H): 300mm x 300mm Feed speed (variable): 0~18 m/min same as new