Used Nihon Kohden Cardiofax Gem for sale (320)

Condition: used, This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system. Capacity: 2000 bottles per hour Aluminium Cutting: Fords systems Format: 1 Pint Milk Bottles Sealing Device: Included Iodpfx Ahsxzx S Sjystb Construction: Fully Stainless steel on product connection Parts Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over Collection Table: Included Condition: Will be fully refurbished or As is

Condition: good (used), Choice of 40” drums to make products such as hash browns, potato waffles etc. Please note that the triangle hash brown unit has now been sold (August 2025) Iodpfx Ajqpd Ttshyetb

Condition: good (used), Rarely available. Idaho Little Gem 40" former for the production of potato croquettes etc. These are the industry standard machines used to produce for the World's leading fast food chains etc. Itedeigrvpepfx Ahyjb

Condition: used, functionality: fully functional, Instrumentation Laboratory GEM Premier 4000 Blood Gas Analyzer. The GEM Premier 4000 is comprehensive whole blood analyzer, offering a flexible analyte menu including pH, pO2, pCO2, electrolytes, metabolites and onboard CO-Oximetry. Yet it’s remarkably easy to use and maintenance-free, making the GEM Premier 4000 ideal for busy labs, use at the point-of-care and everywhere fast turnaround is mandatory. Easy to learn, simple to operate and complete, IL’s GEM Premier 4000 with iQM revolutionizes whole blood testing. 2 for sale. 1 piece/350 EUR. Itjdpjupvypsfx Ahyjb Good working condition. Please check out our other listings as well.

Year of construction: 2008, condition: used, Fully automatic carton sealing machine for gluing on top with self-adhesive tape • Running direction from right to left • Carton size range width 100- 500 mm, height 100 - 500 mm, length 150 - 760 mm • Output 20 cartons/min • Flap folding device • Drive 400V/50Hz Isdpfoimbdbox Ahyotb • 2 conveyers with length 4.30 m/2.50 included can dryer system • CARTON BOX SEALING MACHINE COMARME B52

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: N2104796, GEM F470 Iodpfx Aswtc Haehyjtb automatic cardboard box sealer with automatic LATCH LOCKING FOR CONSTANT CARDBOARD FORMAT incl. centering unit and PLC S7 Siemens control system BOX DIMENSIONS: - Length : min. mm. 150 - max. mm .600 - Width : min. mm. 100 - max. mm. 520 - Height : min. mm. 100 - max. mm. 670 TECHNICAL DATA: - SPS Siemens S71200 control - Centering unit infeed RCC500 - Drive & guide belts Vertical - Carton format setting Manual - Bottom & lid sealing unit - Standard version T22 / T23 - Tape width From 50 to 50 mm depending on the unit - Tension adjustable - Max tape roll diameter 360mm - Core tape roll 76mm - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Consumption 0.25 kW - Degree of protection IP 54 - Working environment + 5° C - max. +35° C - Transport speed 22 mt/min. - Average production 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm. 2,470 x 990 x 1,782H - CE safety protection: side sheet metal covers with access door, supplemented with infeed doors L 850 mm, top and bottom cover. Illustration may contain options subject to surcharge

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: F2101146, F2000 AUTOMATIC CARTON ERECTOR CARTON DIMENSIONS: - Length : min. mm. 220 - max. mm. 600 - Width : min. mm. 100 - max. mm. 500 - Height : min. mm. 100 - max. mm. 500 TECHNICAL DATA: - SPS Siemens S71200 control - Output: 840 cartons/min (depending on length and quality of carton) - Carton magazine: 110 cartons - Control panel: HMI digital, Kite model 7'' - Automatic start / stop by photocell - Venturi vacuum system: 25m3 /h 700mm HG - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Degree of protection IP 54 - Compressed air 6 bar - Air consumption 22 nl Itedpju Tk A Sefx Ahyeb - Working environment + 5° C - max. +35° C - Working height 650 mm adjustable +30 mm - Weight 490 kg - Machine dimensions mm. 1.535 x 2.125 x 2.105H - CE safety protection The machine includes a GEM B52 carton sealer. GEM B52 CARTON SEALER WITH SIDE DRIVE BANDS FOR CONSISTENT CARTON FORMAT CARTON DIMENSIONS: - Length : min. mm. 150 - max. mm. ∞ - Width : min. mm. 100 - max. mm. 500 - Height : min. mm. 100 - max. mm. 500 TECHNICAL DATA: - Drive & guide belts Vertical - Carton size adjustment Manual - Bottom sealing unit - Standard version T22 / T23 - Tape width From 38 to 50 mm depending on the unit - Tension adjustable - Max tape roll diameter 360mm - Core tape roll 76mm - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Consumption 0.25 kW - Degree of protection IP 54 - Working environment + 5° C - max. +35° C - Transport speed 22 mt/min. - Average production 1000 cartons/hour - Working height 650 mm - Weight 85Kg - Machine dimensions (L x W x H) mm. 900 x 880 x 1.750H - CE safety protection: side sheet metal covers with access door, upper and lower covers covers (mandatory in combination with F1000/F2000/F2008) Illustration may contain options subject to surcharge

Year of construction: 2011, condition: used, Field of application: Construction Iodpfx Ahswph Egeyjtb Serial number: 110245xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20555 Specifications: Model year: 2011 Engine hours: approx. 7,200 (may increase – machine is in daily use) New chains on the mast Undercarriage: see photos for condition Boom rotor replaced about a year ago (cost: EUR 21,000) Oil leakage under the rig Tracks at the front of the mast are damaged and need replacement Hammer not included Video available Delivery by arrangement Description:2011 Gemsa Gemrok 45 SDKJM drill rig.Fitted with new chains on the mast and storage unit. The boom rotor was replaced approximately one year ago, with a total investment of EUR 21,000.There is an oil leak under the rig, and the front tracks on the mast are damaged and will need to be replaced.The machine is currently in daily use, so the hour count may increase.A video is available upon request. Delivery to be arranged. Hours: 7200 Own weight: 11 Model: Gemrok 45 borevogn. SE VIDEO

Condition: used, Year of construction: 2012, Serial number: 120705xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21979 Specifications: - 2012 model - Hours: Owner is uncertain Iedpfx Aex Dhakohyotb - Double key - Deutz Engine - Water tank - Undercarriage (see pictures) - Washer - Comes with drilling equipment, 3 hammers - 4-10 inch holes - Services have been done myself - Ready for delivery Own weight: Model: 2012 Gemsa Brønnborerigg

Condition: used, Year of construction: 2004, Field of application: Construction Serial number: 04085xxxx Please contact ATS Norway for more information Please provide reference number upon request: 15082 Specifications: Model year: 2004 Hours: Approx. 10,000 hours (Hour counter has stopped) Chassis: See pictures Belt width: Approx. 40 cm Equipped with winch Includes Dynaset generator Services: Performed both by the owner himself and at the workshop Remote control Ready for delivery M l: Length: 6.00 meters Height: 2.70 meters Width: 2.32 meters Weight: 12.6 tons Ijdpfjvg Nt Isx Ahyjtb Description: The hour meter has stopped, but the owner estimates that the machine has run approx. 10,000 hours. The engine was replaced 2 years ago and has only run 500 hours since the change. Drills 193 mm holes and the included equipment includes a drill bit and 120 meters of rods for immediate use. The machine is equipped with a 4-cylinder Deutz engine that only has 500 hours on it after engine replacement. It is ready for delivery and ready for work. Please contact us for more information or a viewing! Hours: 10000 Own weight: 12600 Model: 55S

Condition: used, Year of construction: 2012, Field of application: Construction Serial number: 120220xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18508 Itsdpfx Ahsv U Sggjysb Specifications: 2012 model Approx. 1,000 hours 250 m drill rods Suitable for well drilling and horizontal drilling 5 drill hammers included: 2 × 4-inch, 5-inch, 6-inch, and 8-inch (the 8-inch is brand new) Includes hoses and various additional equipment Grinding machine and drill bits included High-pressure washer Generator Welding machine 150 m air hose Location: Iceland Hours: 1000 Own weight: 14000 Total Weight: 14000 Model: Gemrok GDT brønnborerigg

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, CNC Lathe - Horizontal / Brand: GEMINIS / Type: GEMINIS GT9 G2 (heavy series) / Year of construction: 2015 Ijdpfevuih Usx Ahystb The machine can be inspected by appointment under power. TECHNICAL DATA: - Max swing over bed: 2.000 mm - Distance between centers: 8.000 mm - Height of centres: 1.050 mm - Swing over slide: 1.600 mm - Main spindle bore Ø: 150 mm - Main spindle nose: DIN 55026-15 - Speed range: 4 - Speed range I: 0-80 rpm - Speed range II: 0-175 rpm - Speed range III: 0-350 rpm - Speed range IV: 0-700 rpm - Cross slide travel: 1.060 mm - Quill Ø: 400 mm - Quill travel: 300 mm - Max. weight allowed between centers: 30 tons Machine base: - Distance between the guideways: 1.350 mm - Height of the machine base: 650 mm EQUIPMENT / ACCESSORIES: - CNC-Control: FAGOR 8065 - Independent 4-jaw chuck: Ø 1.600 mm - Set of hard inner and outer claws - Square automatic turret: SAUTER 4 pos – Ø 320 x 320 mm - Tailstock and quill: Motorised - Quill placement: Built-in Rotating - Automatic Locking/Unlocking of the tailstock body - Air conditioner for electronic cabinet - Portable electronic handwheel - Chip conveyor - 4-support Closed steady rest: Ø 500-900 mm - Permissible weight allowed for steady rest: 10 tons - Prepared for C-axis with transmission from main engine - Preparation for subsequent adaptation of a milling head with Y axis on turret - Preparation for rectifier head assembly - Very well-equipped with tools Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: used, Cogem engine-driven pump set 3''    • Maximum capacity 70 m3/h    • 125-liter tank    • Electric start    • Complete with suction hose Iedpfoyazwvox Ahyetb Condition: Used Year of manufacture: 0

Condition: used, Year of construction: 2018, Cantilever rack, heavy duty rack -Manufacturer: Gemac, cantilever rack base field double-sided -Cantilevers: 5 per side -Compartment height: 33 cm Itsdpfx Ahoryx Tzjyob -perm. Load: 200 kg per cantilever arm / 1000 kg total. see nameplate -Quantity: 12x shelves available -Price per piece -Dimension: 1315/1210/H2000 mm -Weight: 98 kg/piece

Condition: used, Tobacco cutting machine Itodpfx Ahsiy Efijyob -Sold/handed over: in its current condition as seen -Prototype: Machine is not operational -Manufacturer: Sagemüller, tobacco cutting machine with knife sharpening device -Cutting blades: 8 pcs. length 400 mm, 2 pcs. die 850/120/H275 mm -Individual components: see photos -Machine dimensions: 1900/1340/H1810 mm Total weight: 1935 kg

Condition: used, Ball valve, ball valve internal thread, metal ball valve Iodpsq Tfhnsfx Ahyotb -Manufacturer: GEMÜ, 2/2-way metal ball valve stainless steel, unused in original packaging -Type: B20 20D 137 SL Item No.: 88613077 -Size: DN20 3/4" -Pressure: PN63 63 bar -Hand lever: lockable -Quantity: 7 pieces available -Price per piece -Dimensions of cardboard: 180/100/H50 mm -Weight: 0.6 kg/pc.

Condition: used, Ball valve, ball valve internal thread, metal ball valve -Manufacturer: GEMÜ, 2/2-way metal ball valve stainless steel, unused in original packaging -Type: B20 25D 137 SL Item No.: 88613078 -Size: DN25 1" -Pressure: PN63 63 bar -Hand lever: lockable -Quantity: 6x ball valve available -Price per piece Iodpfxoq Tfhrj Ahyotb -Dimensions of box: 195/120/H60 mm -Weight: 0.9 kg/pc.

Condition: used, Measurement data acquisition device, test device, telemetry system, Can-Bus monitoring -Gemac: CANobserver .: 22550-00 -Number: 1 pieces -Dimensions: 115/50/H125 mm -Weight: 0.5 kg Iedpfx Ahjfg E E Njyjtb

Condition: good (used), Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch, level switch, magnetic lock switch -Manufacturer: Igema, magnetic lock switch Isdpfx Ajq Adpfohyotb -Type: M 510-60 -Voltage: 6-230V AC / 6-42V DC -Quantity: 3x switches available -Price per piece -Dimensions: 110/50/H170 mm -Weight: 0.4 kg

Year of construction: 1984, condition: good (used), centrifugal pump, acid pump, alkali pump -Motor power: 11 kW -Speed: 1440 rpm Itedpfsb A R Iysx Ahyob -Capacity: 40 m³/h -Pipe connection inlet: DN80 -Pipe connection outlet: DN80 -Dimensions: 1550/550/H550 mm -Weight: 240 kg

Condition: used, conveyor belt, belt conveyor, transport belt, belt conveyor Ijder H Nl Topfx Ahystb -Conveyor belt: Conveyor belt on solid stainless steel base, height adjustable -Speed: 14.5 m/min -Conveyor belt width: 385 mm -Conveyor belt length: 2195 mm -Motor/gearbox: Nord 0.55 kW see photo type plate -Total dimensions: 2215/630/H860 mm -Weight: 69 kg

Condition: new, saw blade diameter 600 x 30 mm capacity 90 degrees: round 215 mm capacity 90 degrees: square 195 x 195 mm capacity 90 degrees: flat 140 x 395 mm capacity 45 degrees: round 170 mm capacity 45 degrees: square 170 x 170 mm Ijdpfx Ahjxaccfoyjtb capacity 45 degrees: flat 100 x 175 mm turning speeds 2800 U/min total power requirement 3.0 kW weight of the machine ca. 310 kg range L-W-H 1077 x 1214 x 1558 mm Features: - Semi-automatic high-performance circular saw (underfloor) * For cuts from 0° to 180° right and left * In aluminum and light metal alloys * With rising saw blade * With extremely large cutting range (saw blade diameter 600 mm) * Digital display for angle adjustment from 0° to 180° - Manually opening safety cover - Hydro-pneumatic saw blade feed (via two-hand operation) - 2 pneumatic vertical vices with quick adjustment - Heavy-duty cast iron construction ensures vibration-free . . operation and maximum precision - Large bearing-mounted turntable with internal indexing at 0/45° * Ensures quick adjustment for miter cuts - Extractor nozzle for connecting a chip extraction system - Pneumatic spray system for cooling and lubricating the saw blade - Machine base frame - Powerful saw drive with 3-phase 3HP motor Included in delivery: - 1x carbide saw blade ø 600 mm - Blow-out gun - Full protective cover - Tool set - Detailed operating instructions, maintenance manual, etc.

Condition: new, saw blade diameter 0 x 30 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 125 x 125 mm capacity 90 degrees: flat 190x100 / 230x50 mm capacity degrees: round 110 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 130 x mm turning speeds 2800 U/min mitre joint cuts -/+ degrees total power requirement 2.2 kW weight of the machine ca. 2 kg Itsdpfx Ahsxaa Husyob range L-W-H 1600 x 750 x 1000 mm Features: - Semi-automatic high-performance circular saw (underfloor) * For cuts from ° right to ° left * In aluminum and light metal alloys * With rising saw blade - Manually opening safety guard (optionally with pneumatic opening) - Hydro-pneumatic saw blade feed (via two-hand operation) - Heavy-duty cast iron construction ensures vibration-free . operation and maximum precision - Large bearing-mounted rotary table with internal indexing at 0/° * Ensures quick adjustment for miter cuts - Extraction nozzle for connecting a chip extraction system Scope of delivery: - 2 pneumatic vertical vices with quick adjustment - Tool set - Detailed operating instructions, maintenance manual, etc. - Blow-out gun - Machine is delivered without a saw blade!

Condition: new, Year of construction: 2025, New machine Itjdpfx Asx Sttujhyob Year of manufacture: 2025 Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical data Machine length: 2,122 mm Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Electrical connection: 400 V Total connected load: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term

Condition: used, Year of construction: 1976, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 800 mm turning length: plan =140 / quer =120 mm center height over bed: 170 mm spindle bore of work spindle: Ø 40 mm range of revolution per miute: 25 - 2000 / 20 step U/min feeds:: längs: 0,028 - 1,0 / quer: 0,012 - 0,44 mm tailstock quill taper MT: MK3 tailstock quill adjustment:: 120 mm total power requirement: 3,0 kW weight of the machine ca.: 1,1 t dimension machine xH: 2,0 x 0,8 x 1,4 m Itsdpfxeva Erte Ahyeb Threading possible: Metric, Withwort and modular thread Equipment: - 2-way measuring device VISUCONT - 3-jaw chuck Ø 205mm with internal clamping jaws - quick-change steel holder Multifix - foot brake - cooling water pump (exclusive supply) *