Used Oce Varioprint 4120 for sale (220)

Condition: ready for operation (used), Year of construction: 2014, Two high-precision Wipotec checkweighers are available. 1) Wipotec OCS/EC, year of manufacture: 2014, throughput: 150 products/min, max. belt speed: 0.75m/s, weighing range: 200g-300g. 2) Wipotec OCS/HC-A-200, year of manufacture: 2014, throughput: 200 products/min, max. belt speed: 1m/s, max. weighing weight: 750g. Documentation available. On-site inspection is possible. Iedpfx Aewa Ti Esb Totc

Condition: excellent (used), measuring range X-axis: 250 mm, measuring range Y-axis: 380 mm, OCS Alfa-SYS Sara-set 33 Swift tool setting machine in very good condition. Current inspection/test until May 2025. I am including three pieces of fonts with the machine. The machine includes a Dymo Label 450 printer and a mouse with a disc. I am including a book with the machine. Itjdpfev Am Emox Ab Toc

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, number of slots in tool magazine: 120, total height: 2,900 mm, table length: 400 mm, table width: 400 mm, coolant supply: 40 bar, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, spindle speed (max.): 28,000 rpm, spindle speed (min.): 20 rpm, table load: 200 kg, operating hours of spindle: 39,945 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Scope of delivery: - HSC 55 machine - 3R-WorkMaster II pallet changer (automation) with all pallets Ijdpfx Aju Ivkgjb Tstc - High pressure system / belt filter system (DMG) - Refrigeration unit (OLAER) - chip conveyor Excluded from delivery: - Vices - Tool holder Technical data of machine: - See attached OC (order confirmation) Technical data automation: - Available, on request.

Condition: good (used), Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, transformer, auto-transformer Isdpfx Aow S Dm Deb Totc -Manufacturer: OCE Montecchio, Auto-Transformer Type CEI 14-6 -Power: 400 VA -Technical data: see photo type plate -Dimensions: 120/110/H125 mm -Weight: 5.8 kg

Condition: good (used), Column jib crane, overhead crane, workstation crane -Large base plate: 1000 x 1000 mm -Load capacity: 1000 kg -with chain hoist: Balkancar type B063M -Main stroke: 3.6 m/min -Fine stroke: 1.2 m/min -Reach: 3000 mm -Total height: 4120 mm -Hook height: 3110 mm -Swivel range: 360° -Transport dimensions: 4260/1160/H1000 mm Ijdpjxylgajfx Ab Tetc -Empty weight: 1290 kg

Condition: good (used), Year of construction: 2003, sheet width 2520 mm plate thickness 2.50 mm ST thickness at "Niro-steel" 1.50 mm upper clamping bar adjustment 160 mm Itedpfx Ajxbh Eujb Tec adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm Bending speed ca. 120 Grad/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 total power requirement 7.2 kW voltage 400 V weight 3430 kg range L-W-H 4120 x 2400 x 2090 mm Current new price ~ 100.000 euros From a maintenance workshop With very good equipment (!!) Equipment: - CNC electric motor-driven universal swivel bending machine * High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotatable upper beam / as automatic tool change system * With 2x tool stations (sharp and goose foot bending rail) * Reduces set-up and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 * Control panel at front right (operable with PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swivel control, front right - Servo converter-controlled drives * for bending/upper beam & electric backgauge - CNC motorized lower beam adjustment - CNC electric motorized backgauge * Travel speed 300 mm/sec. - with rear sheet metal support surface, including ball rollers - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: used, mileage: 100,000 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, first registration: 04/2021, next inspection (TÜV): 03/2027, emission class: none, color: white, driver cabin: other, suspension: other, number of seats: 6, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, sliding door, soot filter, traction control, * Appointment scheduling for consultation and test drive = shorter waiting times: * Time is valuable, and you shouldn’t spend it waiting. This is why we ask you to arrange an appointment by phone for consultation or a test drive. * Service booklet * Non-smoker vehicle * Sortimo shelving system TRANSMISSION / CHASSIS * Drive type: Front-wheel drive * 6-speed gearbox LIGHTING & VISIBILITY * Visibility Package 1 * Windscreen wiper with adjustable intermittent function * Fog lamps with static cornering light * Entry lights * Headlight range adjustment * Indicator integrated into exterior mirrors * Rear fog lights ENTERTAINMENT * Digital radio reception (DAB+) * Multifunction steering wheel * Digital radio reception (DAB / DAB+) ASSISTANCE SYSTEMS AND SAFETY * Driving assistance system: Crosswind Assist * Driving assistance system: Hill Start Assist * Passenger airbag * Driver airbag * Option to deactivate passenger airbag COMFORT * Cabin seats: Driver's seat with lumbar support * Auxiliary heater * Additional electric heater * Rear wing doors without windows (opening angle 256 degrees) * Fog lamps * Daytime running lights * On-board computer * Front and rear park pilot system * Cruise control * Air conditioning * Isofix child seat attachment points * Diesel particulate filter * Start/stop system * Heated windscreen * Single rear wheels * Standard front axle load * Brake dust shield * Axle ratio 4.429/3.263 * Visible and proven exhaust pipe * Mechanical parking brake * Air conditioning refrigerant R134A Itjdpfx Abjydtm Do Tjc * Standard fuel tank * Diesel switch-over capability * Lockable fuel filler cap * Speedometer (km/h) * Reduced deep discharging of batteries * Not for mobile office equipment * Microphone * Halogen headlamps * Less headlamps - wiper activated * No roof marker/clearance lights * Roof-mounted interior/map lights * Frost white * No fleet equipment * Production plant Otosan (Turkey) * O. ul f. media database * Fewer special value packages * Roof mounted radio antenna * Additional brake light * Front bumper partially in body color * Sliding window, 2nd row left * ICE base version (OC) with DAB USB * Rear parking aid * Grill - rear wall/partition * Rubber flooring in footwell * Lockable glove compartment * Pollen filter * Manually adjustable double passenger seat * Single driver’s seat / double passenger seat as required * Driver’s seat with armrest * Two-stage door hinges * Full wheel covers * Special high-performance alternator * And much more * All information is provided without guarantee. They do not constitute an agreed quality. Subject to error and prior sale. * Our services: * Financing available, also without down payment * Registration service * Trade-in of your old vehicle * Delivery possible * Tyre service, winter and summer tyres available at extra cost * We also speak various languages: * English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian, Macedonian, Slovenian, Bulgarian, Slovak * We look forward to your visit!

Condition: excellent (used), Year of construction: 2002, Model .Amada. Vipros 368 King Stock number 01967 Year of manufacture 2002 Frame Construction ... Bridge Type Press Capacity ... 30 Tonnes (294 kN) Press Type ... High Speed Hydraulic Servo Ram Axis Traverse Distance ... 1525 x 2000 mm Workable Max. Sheet Size ... 1525 x 4000 mm (with auto repositioning) Max. Material Thickness ... 3.2 mm mild steel Max. Hole Dia. Max. Material ... . (shearing strength 36 kg/mm2) 82 mm dia Max. Material Weight ... 75 Kg Max. Material weight ( Max. Speed) ... 60 Kg Max. Hole Dia. ... 114.3 mm Number Of Stations ... 58 stations:24 x 12.7 mm 24 x 31.7 mm 4 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm 2 x 114.3 mm Axis Speed ... 113.0 m/min Hits Per Minute (2mm pitch) ... 860 H.P.M./3 mm stroke (8mm pitch) ... 560 H.P.M./3 mm stroke (25mm pitch) ... 460 H.P.M./3 mm stroke Turret Speed Bi-Directional ... 30 R.P.M. Punching Accuracy ... ± 0.1 mm (incl. 1 reposition) Isdpfsvn D Tfjx Ab Totc Ram Stoke Length (maximum) ... 40 mm Tool Lubrication ... Air Blow System Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 28 kVA 400V +/- 10% 50Hz Air Pressure Required ... 5.0 Kgf/cm2 Air Flow ... 250 1/min Cooling Water Flow ... Min 40 1/min. Machine Length ... 5025 mm Machine Width ... 4120 mm Machine Height ... 2630 mm (3190 mm to mirror) Machine Weight ... 18000 Kg

Condition: used, Year of construction: 2010, functionality: fully functional, MARCHESINI BLISTERING LINE composed of 1) MARCHESINI BLISTERING MACHINE, MODEL MB460 Continuous motion machine for PVC/ALU blisters (can also process different materials in polypropylene, PET, PVC+Aclar, COC). Thermoforms the blister packs and fills them with products of various shapes (capsules, tablets, oblongs and others), seals the cover and discharges the packaged blister packs onto the output belt. Design, construction and ergonomics are compliant with cGMP standards. Balcony technology for easy access, maintenance and cleaning. Built in 2010. PRODUCTION Production speed: up to 600 blisters/min Blister size: Width: 30 - 86 mm; Height: 3 - 12 mm; Length: 70 - 140 mm 2) MARCHESINI CARTONING MACHINE, MODEL MA352 Continuous motion horizontal cartoning machine, suitable for high-speed cartoning of bottles, vials, droppers, etc. Entirely with a balcony structure for maximum accessibility, extremely fast format changeover times and minimal maintenance. Built in 2010. PRODUCTION Mechanical speed: up to 400/minute Format range: A: 25 - 70 mm; B: 15 - 85 mm; H: 65 - 150 mm ENERGY CONSUMPTION Installed power: 7.5 kW; Compressed air consumption at 6 bar: 240 Nl/min 3) METTLER TOLEDO DATAMATRIX STATION Serialiser for pharmaceutical product packaging. Built in 2020. - 2 megapixel camera - full track and trace compliance - Output: 400 pcs/minute (max) 4) OCS CHECKWEIGHER, MODEL HC Built in 2009. PRODUCTION Isdpjycxb Defx Ab Tetc Number of weighings: 400 pcs/minute (max) Range: From 0.1 g to 750 g / 0.0d to 10 g Max. speed: 1.67 m/s CHARACTERISTICS Energy: 230 V 50 Hz

Condition: good (used), Year of construction: 2013, functionality: fully functional, The devices are fully functional. Prepared for operation in a production line. They operated online with an OCE Variostream 8650 roll printer. Isdpfx Aotq Agaob Totc

Condition: ready for operation (used), Year of construction: 2000, sheet width 2520 mm plate thickness 4.0 mm ST thickness at "Niro-steel" 2.0 mm upper clamping bar adjustment 250 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm work height max. 869 mm control POS 2000 voltage 400 V total power requirement 6.0 kW weight 4100 kg range L-W-H 4120 x 2400 x 2090 mm current list price ~ 90.000 euro from a maintenance workshop with excellent equipment (!!) new touchscreen installed in 2023 - in checked conditoins - machinevideo - ?v=5Y2NheJjdWo Features: - CNC electro-motorized universal bending machine * ??High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds Itedpfx Aex H Alceb Tjc * Torsion-resistant welded construction - SCHRÖDER CNC control model POS 2000 * Control panel front right (operable with PC mouse) * Touchscreen replaced in 2023 * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swiveling control, front right - Servo inverter-controlled drives * For bending/upper beam & electric backgauge - CNC motorized lower beam adjustment - CNC electro-motorized Backgauge * Travel speed 300 mm/sec. * with rear sheet metal support surface - 1x freely movable double foot switch - Operating instructions (PDF) * Optional accessories included: - SCHRÖDER split gouge tools - top

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-N Estun E21 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping E21 controller (Mounted on a swivel arm) - Controls X (backgauge) and Y (ram) axes - Allows the creation of up to 40 programmes - Each programme may consist of 25 steps Ijdpsgi Dldsfx Ab Tstc - Intuitive operation through the use of English abbreviations, which are explained during training It is a sophisticated but easy-to-use controller that allows operation in three modes: - Manual - Single automatic - Serial automatic Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Itsdpfxegi Dlpe Ab Tjc Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4020-CNC Delem DA-58T Specifications - Nominal pressure: 2000 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1800 mm - Height: 2800 mm - Weight: 13700.0 kg Isdpfx Aetizaysb Tjtc Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3220-CNC Delem DA-58T Specifications - Nominal pressure: 2000 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm Itodpfx Asipxzpeb Tjc - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1800 mm - Height: 2900 mm - Weight: 10500.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-N Estun E21 Specifications Itodpfxjh Ranpe Ab Tsc - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping E21 controller (Mounted on a swivel arm) - Controls X (backgauge) and Y (ram) axes - Allows the creation of up to 40 programmes - Each programme may consist of 25 steps - Intuitive operation through the use of English abbreviations, which are explained during training It is a sophisticated but easy-to-use controller that allows operation in three modes: - Manual - Single automatic - Serial automatic Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 4x2000 SMO-2004-N Specifications Itjdpeiggf Iefx Ab Tec - Maximum thickness mild steel (PN-EN S235): up to 4.0 mm - Maximum working length: 2000 mm - Cutting angle: 0.5 - 1.5° - Strokes/minute: 6 - 20 - Backgauge retract distance: 600 mm - Motor power: 4.0 kW - Length: 2700 mm - Width: 1500 mm - Height: 1650 mm - Total mass: 2500.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 8x3200 SMO-3208-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 10 - 15 - Backgauge retract distance: 600 mm - Motor power: 11.0 kW - Length: 4300 mm - Width: 2000 mm - Height: 2100 mm - Total mass: 6400.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) Ijdpfoh Rah Uex Ab Totc - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC Delem DA-58T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist Isdpfx Abetizave Tjtc We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 8x4000 SMO-4008-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 4000 mm - Cutting angle: 1.5° - Strokes/minute: 8 - Backgauge retract distance: 600 mm - Motor power: 11.0 kW - Length: 4800 mm - Width: 1800 mm - Height: 1950 mm - Total mass: 7300.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) Ijdpfx Absiuzupj Totc - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3220-CNC OT-41 Specifications - Nominal pressure: 2000 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1800 mm - Height: 2700 mm - Weight: 10600.0 kg Tools Ijdpfx Abjium Dhs Tstc - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3225-CNC Delem DA-58T Specifications - Max working thickness (S235): up to 10.0 mm - Nominal pressure: 2500 kN - Max working length 3200 mm - Throat depth: 400 mm - Max stroke: 250 mm - Daylight: 535 mm - Distance between side frames: 2500 mm - Max backgauge distance: 600 mm - Nominal motor power: 18.5 kW - Length: 3300 mm - Width: 1850 mm - Height: 2900 mm - Weight: 11600.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences Ijdpfxoium Hke Ab Tetc - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 10x3200 SMO-3210-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 10.0 mm - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 10 - 12 - Backgauge retract distance: 600 mm - Motor power: 15.0 kW - Length: 4000 mm - Width: 1800 mm - Height: 2100 mm Itedpfx Abjiukw Ts Toc - Total mass: 8400.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-CNC Delem DA-58T Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6600.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences Ijdjgi Dkyepfx Ab Tjtc - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 6x2500 SMO-2506-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm - Maximum working length: 2500 mm - Cutting angle: 0.5 - 2.5° - Strokes/minute: 18 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3200 mm - Width: 1700 mm - Height: 1850 mm - Total mass: 3800.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller Itodegih Upjpfx Ab Toc (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.