Continuous feed printer buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
3
Xerox 650/1300 CF monochrome duplex This machine is still in the printer in use, under Xerox maintenance contract. Status: still in production, test possible training possible. FreeFlow print server Date of delivery: immediately Printing speed can be switched on: 91.44 / 68,58 / 59,13 meters per minute Mt3ofo Print resolution: 240 × 240 dpi, 300 × 300 dpi, 600 x 600 dpi, 1200 x 600 dpi The maximum print width 495,3 mm Paper weight: 40-200 g / m ² Location: Szczecin, directly at th... more
3
Xerox 650/1300 CF monochrome embedded Controller Clicks: 70 + 80 Mio. imm. Hunkelers sold, all gone Eewwpwxvs • Supports plain or pre-printed media input from a roll or box-fed • Supports pinfed or pinless media –– 17–53 lb. bond (64–200 gsm) pinless –– 16–43 lb. bond (60–160 gsm) pinfed Print Speed 300' per minute (91.44 meters per minute) switchable to 226' and 194' per minute 654 ipm 2-up simplex US letter or 1,308 ipm 2-up duplex US letter 616 ipm 2-up simplex A4 or 1,232 ipm 2-up duplex ... more
3
Océ VarioStream 7450 has A-TWIN option installed SN 87.1xx pinless paper transport MRM S I-mode integr. Stacker Bbgiarx3 1st Installation: 2011 20 Mio. clicks Ethernet TCP/IP de-commissioned by Canon Availability: immediately upon order ex works present customer site EU more
4
Océ VarioStream 7400 (from same site) SRA3 Controller PINFEED Paper Transport IPDS 600 dpi integr. Stacker R3pvkld0t 26 Mio. clicks still installed and Canon maintained Availability: Dec. 2017 ex present customer site EU more
2
Xerox 1300 CF (2x 650) monochrome, duplex FreeFlow PrintServer Clicks: 95 Mio. 12" each Crnc0tz Availability: imm. ex works present customer site EU • Supports plain or pre-printed media input from a roll or box-fed • Supports pinfed or pinless media –– 17–53 lb. bond (64–200 gsm) pinless –– 16–43 lb. bond (60–160 gsm) pinfed Print Speed 300' per minute (91.44 meters per minute) switchable to 226' and 194' per minute 654 ipm 2-up simplex US letter or 1,308 ipm 2-up duplex US letter 616 ipm 2-... more
5
Xerox 650 CF monochrome Clicks: 32 Mio. clicks. option: can be made available with either Hunkeler or LASERMAX roll-to roll or roll-to stack Availability: imm. ex P2P ShowRoom Nuremberg • Supports plain or pre-printed media input from a roll or box-fed • Supports pinfed or pinless media –– 17–53 lb. bond (64–200 gsm) pinless –– 16–43 lb. bond (60–160 gsm) pinfed Print Speed 300' per minute (91.44 meters per minute) switchable to 226' and 194' per minute 654 ipm 2-up simplex US letter or 1,308... more
5
Océ VarioStream 8750 mit aktuellem Software Bundle 50Hz Pinless Paper Transport IPDS Production Mode TCP/IP 28 Mio. clicks Canon maintained 3q38tmykn available latest by mid March 2017 ex present customer site EU imm. available, if needed with full LASERMAX Finishing LX 550, LX535, LX530, 132CD, 122CD, LX561 + LX566 more
3
Océ VarioStream VS 6100 Resolution: 240/300/600 with auto detection Printing Speed: 106 ppm 2-up letter, 15 m/min. Paper Input: pinfed, max. width 18"/printable 17" integr. Stacker: yes Native Printer Codes: I-Mode Interface: TCP/IP Frequency: 50 Hz. 1st Installation: 2005 Clicks: 4,9 Mio. Status: de-installed Y3aep99gk Availability/ mid August 2016 latest ex works: EU Sales Price in EURO: Request a quote more
6
Dimensions (l x w x h) approx.: 12300 x 2350 x 2400 mm Weight approx.: 180000 kg Description: GENERAL SPECIFICATIONS Useful working lenght 5200 mm Useful working width 1400 mm Nr 1 openings press Nr 8 cylinders for top side - diameter 160 mm Pressure 7 Kg/cm2 Motorized transfer conveyor for the introduction of the panels into PRESS Security norme CE mark Bbhnsixc3j In Online Auction with approx. 99 further Machine Tools and other Assets! Bidding ends: Thursday, 29 March 2018 from 10am... more
6
Pinfeed Schneider 310S for papers in the individual benefit up to 200 g / m ² The cutting machine is used for the processing of endless documents. Components / characteristics: -Format memory: up to 41 different jobs can be saved and available, with counter -Programming: forward, backward, pause -Multiple programs -Microprocessor control system -Transport units: 2 -Paper holders and paper requirements -Width setting: Central with Handwheel -Edge trimmer: 2 -Long term blade 80 degr... more


continuous...
every day

New machines via email!

Be informed!
4
Continuous feed gear box Fabr.ZImmermann Mui3v Type: FZ4 BJ. 1977. more
4
Ink system: viscosity control: automatic, bleed control: automatic, ink and make-up refill: 825ml cartridge automatically metered, print head size: 240mmx41mmx47mm, environment: temp.: 5 - 45°C, humidity: 10 - 90%. 7d30sv90d more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Enbnrsr Portable Cold Material Feed Bin System manufactured by BARBER-GREENE with the following Components and Features: -- (3) 8' x 8' material Feed Bins with Bin Extenders. -- Each Bin fitted with 24"" Variable Speed Feeders that are set up for 3 HP [...] Motors with DODGE Reducers but NO MOTORS are included. -- 24""Collecting Belt Conveyor with Drive Motor and Reducer with 5’ Discharge “Stinger” Section at the end. -- More photos to ... more
6
Stack roller conveyor with lift table Max. stack sizes 100cm x 230cm, 150cm high Vpzarwl0a Lift table with hydraulic power pack 0,75 kW Panel separation by vacuum cups, laying the panels on the cross feedbelts of the ramp Vacuumpump 0,55kW, 14 m³/h Downwards feed by driven belts and vacuum, motor 0,37kW with variator (0 - 6 m/min), 2 x 2,2kW vacuum Transport lengthwise by driven roller conveyor into the following machine, roller conveyor size 240cm x 120cm motor 0,37kW with variator (0 - 10 m/... more
6
Fronius robot wire feed unit with mig welding torch as shown. Wr0ew We have several wire feed units available. Please indicate how many you wish to purchase. Sold as seen. more

Short Mag Bar Feed Hydrafeed MX1B

Burgess Hill, West Sussex, RH15 8QY United Kingdom
5943 km
2005
excellent (used)
Hydrafeed MX1B short mag bar feed, 2005, s/n 5176, 1½ metre bars, 3-80mm dia Yrp3z8 more
5
Electrode welding machine, welding rectifiers, electrode welder electrodes-welding - rectifier type IDEALARC DC-400 Welding power max 400 A wire feeder type LN-23P -empfohlene wire sizes 068 "inch 072" inch 5/64 "inch (max 2,0 mm) --for self protective flux cored wire, with 16 rollers cored wire manufacturer Lincoln type NR-203 NI 1% Ø 2 mm Qlhjj82zf Ground cable dimensions 1350/900/H1250 mm Weight 430 kg more
6
panel measured l x w: max. 3300 x 1500 mm staking height: 2000 mm panel weight: 100 kg clock: 15 Menge/min setting measure approx (l x w x h): 8500 x 4600 mm Dimensions (l x w x h) approx.: 8000 x 2000 x 2300 mm Weight approx.: 4000 kg Co7rvdvk Description: - Bridge length 6700 mm - Total length 7550 mm - Max. Gripping height 2000 mm - Stroke 2100 mm - Max. Plate size L x W 3300 x 1500 mm - Min. Plate size L x W 300 x 300 mm - Max. Plate weight 100 kg - Capacity / cycle time 15 cycles / ... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Yikxghc0l Custom Built Cold Material Feed Bin System with the following Components and Features: -- (2) Bins. -- Each Bin is fitted with 24”x 5’ Variable Speed Feeders with 10 HP AC Motors. (not shown in the photo). -- 30” Wide Collecting Belt Conveyor (Not shown in the photo. No Head or Tail Pulleys included). -- Note: The (2) Bins are connected at the center. more
3
Automatic carcase clamp, working left to right Min/max. furniture height: 300 / 1220 mm. Max. furniture width: 610 mm. (max. pass: 720 mm.) Min/Max. furniture length: 300 / 2500 mm. Working height: 500 mm. Number of horizontal pressure units: 3 Cycle tim approx. 20 s. Feed by belt, variable feed speed N8ubs7gyf Working pneumaticaly Automatic detection of the furniture sizes more
5
1 continuous furnace "AUE", 40KW, capacity approx. 80 kg / h, 2013 (with control and heated Cabinet) 2. stove oven "AUE", 45KW, internal dimensions approx. 200 x 200 x 200 cm, 2011 (with control and heated Cabinet) 3. 4 PCs. rack trolleys with 40 containers of part (on the photo, in the furnace to see) 3 peripherals: bunker, 4 PCs. magnet conveyor belts, part of the problem with linear conveyor, 3 PCs. quenching tank (1 x VA), Trowalanlage (Spaleck), centrifuge (Spaleck), Rotary dryer (Spalec... more
3
Mt909Xerox 6204 Wide Format Printer / scanner / Folding more
3
3-roll feed, feed, spindle moulder feed -3-roll feed Qkouogp0o -Feed speeds weight 50 kg more
6
working lenght min.: 250 mm distance: 32 mm control: SPS software: Windows XP Dimensions (l x w x h) approx.: 9000x2400x3000 mm Weight approx.: 5000 kg Description: - infeed conveyor 2500mm - connection belt 1500 mm - CNC Pilot S 20.11/7 drilling and milling center revolver aggregate 5,5 kw max. 18.000 r/min with 10 fold changer (centre holes possible) - drilling aggregate 4 kw max. 6000 r/min 11+5 drilling spindles horizontal 32 grid 9 drilling spindles vertical 32 grid - connection ... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Yikyc0two CEDAR RAPIDS Portable Cold Material Feed Bin System with the following Components and Features: -- (4) 8' x 10' Feed Bins with Bin Dividers. -- 8'x 24” Belt Feeders with 5 HP DC Motors, -- 30""x 50' Collecting Belt Conveyor. -- Frame Fitted with (2) Axles (No Wheels or Tires). more
2
Aigner integral stops Aigner table spacers left and right Feed More info and pics on request The machine is tested mechanically and electrically before delivery. F9t3mncng End-users receive a warranty of 12 months. more
3
Yrp8csVierzijdige schaafmachine met 4 assen - type SYNCRO - spanning 3 x 380 volt - ce veiligheidsnormen - uitvoering : * maximale werkcapaciteit 180 x 105 mm * minimale werkcapaciteit 20 x 6 mm * met referentiefrees more
6
729hlwkheLine consisting of: Top/bottom glue spreader Disc conveyor capacity 1400 mm Throughfeed press with platen size 1400 x 4400 mm platen thickness 38 mm Specific pressure on 80% of the surface: ca. 5 kg/cm2 downstroke rams 8 x diam 110 mm water heating (boiler not included) outfeed belt 5500 mm more
5
3-roll feed, feed, spindle moulder feed Qkoof7zvz -3-roll feed Feed speeds 2-30 m / min Weight 40 kg more
6
Dimensions (l x w x h) approx.: 13500 x 2400 x 1200 mm Weight approx.: 2000 kg Description: LIGMATECH ZHR 05/L/085 Feedback System Machine # 0-305-08-4385 Feed 8 - 30 m/min. Workpiece length approx. 300 - 2.500 mm Workpiece width approx. 60 - 800 mm Workpiece thickness approx. 8 - 60 mm Air table 2.500 x 1.000 mm with slanted position 60 mm Etavjuf Length of conveyor belt approx. 9.200 mm Width of conveyor belt approx. 1.000 mm Conveyor roller approx. 2.250 x 1000 mm more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Tukg7psj Custom Built Cold Material Feed Bin System with the following additional features:, -- (4) 10' x 12' Feed Bins. -- Electric Gates. -- Each Bin fitted with a Grizzly. -- 10'x 30"" Variable Speed Belt Feeders with 5 HP DC Drives and DODGE Reducers. -- No-Flow Detector Switches and Tachometers on each Bin. -- Bin Extenders. -- 24"" Walkway along Bin Tops. -- All bins are relined with Steel. -- 30""x 48' Belt Collecting Conveyor. -- Feed with ... more
3
More info and pics on request The machine is tested mechanically and electrically before delivery. Dygzprd End-users receive a warranty of 12 months. more
3
workpiece length:2000 (2x) mm roll diameter:75 mm work piece width:700 mm weight of the machine ca.: t Jttyhi more
1
Feeding unit with 3 pneumatic rollers Muyg9 Feeding automatically a double end tenoner or edge bander more
6
Dimensions (l x w x h) approx.: 8475 x 2985 x 2015 mm Weight approx.: 4000 kg Description: For decoupling of processing machines by interstitial buffering of workpieces. The workpiece is automatically taken horizontally from a transport, set up vertically on the long side and can be removed from the storage tank. - 75 positions - lenght of return path: 8400 mm - processing machine: v=ca. 30m/min Road height: 950-1000mm - conveying transports:v= 10-50 m/min frequenzy-controlled - drive-an... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cqxfsphxw Material length 9"" to 80"" opening with Trim saws; Motorized opening with LED readout on the control panel; Left hand fixed with left hand fence line. -- Hopper magazine for material capacity: Minimum length 9"" (230 mm), max. 80"" (2,000 mm); width 0.8"" (20 mm) to 6-3/4"" (160 mm) and thickness 0.4"" (12 mm) min. up to 3.14"" (80 mm) maximum. -- Each side equipped with: (2) Trim saw motors 5.36 HP; saw blade dia. 15.75"" (400 mm). -- Hydra... more
4
Stroke: Max 500 mm. Material thickness: 0.5-12 mm. Material width: approx. 100 mm. Incl. hydraulic system with control Thrust and clamping force: 20.000.N Operating pressure: 180 bar Feed weight: approx. 450 kg. ABM. L x W x H: 2250 x 750 x 1400 mm. The plant can be seen under power and is immediately available. Please also my other listings. Xhmaz9o more
6
5-reel feed wood produced ET 117 very good condition, as good as new with tripod easy handling and positioning Roll width: 60 mm Diameter: 120mm Construction year: CA 1988 the cast is very stable and rigid tripod each squeegee is separately stored, with a big spring way optimal security against non-return with swivel joint for horizontal and vertical use the 5 rolls are also in very good condition works fine Na0at has been used very little and is in absolutely mint condition, was... more
3
Automatic carcase clamp, working right to left Min/max. furniture height: 300 / 1220 mm. Max. furniture width: 610 mm. (max. pass: 720 mm.) Bbdj30ho0p Min/Max. furniture length: 300 / 2500 mm. Working height: 500 mm. Number of horizontal pressure units: 3 Cycle tim approx. 20 s. Feed by belt, variable feed speed Working pneumaticaly Automatic detection of the furniture sizes more
6
Dimensions (l x w x h) approx.: 15000 x 1800 x 4000 mm Weight approx.: 4500 kg Description: Pressure surface approx. 3000 x 1800 x 600 mm, 3 vertical press cylinders, horizontal press unit, electrically movable, with safety light barrier system, 2 removal transport belts, total length approx. 6500 mm In Online Auction with approx. 641 further Machine Tools and other Assets! Bbfli8fvf2 Bidding ends: Monday, 19 February 2018 from 10am (local time) Auction start price: EUR 1.500 (plus VAT and 15%... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Dak7fv2 Portable Cold Material Feed Bin System manufactured by STANDARD STEEL with the following Components and Features: -- (4) 8' x 12' material Feed Bins. -- Electric Gates. -- Each Bin fitted with a Grizzly. -- Each Bin fitted with 5'x 20"" Variable Speed Belt Feeder with 5 HP DC Drive and FAULK Reducer, -- No-Flow Detector Switches and Tachometers on each Bin. -- 24""x 55' Collecting Belt Conveyor with 15’ Foldable Discharge “Stinger&r... more
6
Bar feeder for lathe, bar loading magazine bar feeder FMB Hydrobar Type Turbo 3000/1700 make: LMS No. 3-200943 1989 rod diameters up to 38 mm material nominal length 3000 mm Material Max. 3200 mm compressed air 6 bar Power lubrication approximately 1.1 kW motor power feed 0.25 kW Power supply 380 V, 50 Hz - mechanical feed via chain drive gear motor - pipe end with collet 18 mm (18 mm collet is available) - open and close the Rod guide with pneumatic cylinders - rod guide by guiding inserts made... more
2
DESCRIPTION Engine type: Electric hydraulic NC roll feed 9tp380yev Type: GVHY 600/120 Storage location: Ennepetal Stock number: 1094 Material width: 0-600 mm Material thickness: 4 mm Material cross section Max: 1800 mm ² Roll diameter: 120 mm Feed accuracy: +/-0.1 mm Hard chrome-plated and polished rollers Band guide with basic adjustment Roller support 4-way Hydraulic quick roller ventilation NC hydraulic drive Control Panel. PLC input step motor controlled PSS 300 Specia... more
6
Venturi-vacuumlifting and balancing system Max. capacity: 70 kg. Max. radius 2700 mm. Max usefull radius: 2490 mm workpieces rotation around horizontal axis: 180° 360° freedom Bbfjjymmph Vertical stroke: 1000 mm. Number of suction cups: 4 Height needed: 3600 mm. more
6

Vacuum Feeding System -

Düsseldorf Germany
6383 km
used
Offer
Another 9 hours
Dimensions (l x w x h) approx.: 18000 x 12000 x 4500 mm Weight approx.: 15000 kg Description: Consisting of a gantry with vacuum suction traverse, 16 driven roller conveyors WTT, roller width each approx. 540 mm, each conveyor conveying length approx. 8500 mm, support table, driven, further transport with cross conveyor, entire control and regulation technology, cross transfer carriage WTT, for feeding the roller conveyors, gantry passage approx. 15000 mm In Online Auction with approx. 641 furt... more
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Xn2nbt8d ARMINIUS - SP-12, [...] Through Edge Profile Sander.4-Head Single-side conveyorized feed Edge Profile Sander for flat or profiled edges. -- 1st Head: KS-10 Flat linear belt oscillating sanding head for straight edges, 2.5 HP, 4-3/4"" x 82.7"" abrasive belt, 24 MPS belt speed. -- 2nd & 3rd Heads: Type PS33 for sanding profile's or straight edges and also permits the use of sanding discs. -- The workpiece passing through the machine activates a l... more
1
EBS-6500 is a single head industrial printer of type "INK JET" (ink drop ejection), with which you can label the locomotive articles (E.g. on a conveyor) electro. The device is intended for printing with different coloured dye-based inks (i.e. homogeneous, pigmentlosen inks). An outstanding feature of the new printer: no connection to a compressed air supply is required. The printer was with us for indicating batches of buckets in use. There can be other packaging Kennezeichnen, the device is... more


continuous...
every day

New machines via email!

Be informed!

to

to

Change search
CONTINUOUS FEED PRINTER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close