Used Oelskimmer Rsk for sale (209)

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for: joint milling -with: heavy dovetail guide -Milling unit: swiveling -3x: Perske Motors -Engine 1: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Engine 2: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz Lhjdpfx Adjdx Aiwopsk -Speed: 2880/5880 rpm -Motor 3: Type KNS 51.14-2 D -Power: 1/2 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2750/5700 rpm -Other engines with different performance levels are available from us for an additional charge. -Number: 1x joining milling unit available -Price: per piece -Dimensions: 1370/1100/H1330 mm -Weight: 608 kg

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. Lhsdpfx Adezb Idrepek TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Frequency control Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), Sennerskov Hydraulic Plywood Press for Sale Heavy-Duty Oil-Heated Hydraulic Press – Fully Operational A robust and well-maintained Sennerskov hydraulic plywood press is offered for sale due to changes in production requirements. Originally manufactured around 1970, the press was extensively upgraded with a modern PLC control system in 2014 and has since been used successfully in plywood manufacturing. The machine is fully operational and can be inspected while running in production. Technical Specifications * Manufacturer: Sennerskov * Year of manufacture: Approx. 1970 * PLC control system installed: 2014 * Press format: 3,650 × 2,150 mm * Daylight opening: 270 mm * Hydraulic cylinders: 20 pcs. * Cylinder diameter: 110 mm * Maximum hydraulic pressure: 230 bar * Heating system: Thermal oil heated * Weight: Approx. 40 tonnes * Included equipment: * Mylar sheets * Feeding table Description This is an exceptionally heavy-duty industrial press designed for continuous plywood and laminated panel production. The machine features a highly rigid construction, ensuring uniform pressure distribution across the entire pressing surface. The press has been used for plywood production and is suitable for a wide range of applications, including: * Plywood manufacturing * Veneered panels * Laminated wood products * Furniture components * Specialty composite panels The press was modernized with a PLC control system in 2014, providing reliable and user-friendly operation compared to older relay-based systems. Condition * Fully operational * Can be inspected under power and in production * Press plates are in excellent condition * Press plates are flat and free from known damage or deformation * Well maintained throughout its service life Lodpfxezd Shrj Adpjhk

Condition: new, overall weight: 2,600 kg, 2-horse trailer with front exit and tack room from Cheval Liberte model TOURING-COUNTRY-PREMIUM. High entry door, elegant design, aerodynamic, various poly colors, aluminum walls and aluminum floor. Horse transporter for two horses with outstanding driving comfort! The aluminum horse trailer is equipped with a Pullman 2 chassis, which was developed by ChevalLiberte itself. An entry that is only 35cm high, independent wheel suspension, longitudinal control arm, coil spring and shock absorber offer these excellent driving characteristics. Ljdpfx Adov A Txaopjhk A flat ramp that can also be opened like a door makes the horse transport trailer a universal trailer, for example to be able to easily load pallets or to clean the interior better. It is less stressful and less likely for the horses to be injured, as slipping off the flap is thus impossible. The two-horse trailer also has extensive equipment to offer, such as a front exit, tack room, polyester hood in various colors, aluminum walls, aluminum floor, high entrance door, flap door system, Pullman 2 chassis, 100 km/h, interior light, automatic support wheel, four sliding windows, stable frame, V-drawbar and so on. You can find all the equipment below. Inexpensive accessories such as tie-down brackets, feed buckets, weather hoods, drawbar protection hoods, double-wing doors, trailer locks, 2600 kg GVW, aluminum rims and scratching mats are also available. The structure is splash-proof.

Condition: new, overall weight: 2,600 kg, 2-horse trailer with saddle room from ChevalLiberte model TOURING-JUMPING V1. Large entry door, elegant design, aerodynamic, various poly colors, aluminum walls and aluminum floor. Horse transporter for two horses with outstanding driving characteristics! Lhsdpfsv A Tywex Adpok The aluminum horse trailer is equipped with a Pullman2 chassis, which was developed by Cheval Liberte itself. 35cm entry height, independent wheel suspension, longitudinal control arm, coil spring and shock absorber ensure unmistakable driving comfort. Loading or unloading is quite safe thanks to a flat ramp flap. The ramp-door combination of the horse transport trailer is outstanding. This means that pallets and horses can be loaded stress-free and without injuries and the interior can be cleaned better. This means that horses cannot slip off the flap. The two-horse trailer is equipped with a large saddle room, polyester hood in various colors, aluminum walls, aluminum floor, high entrance door, flap door system, Pullman2 chassis, 100 km/h, interior light, automatic support wheel, four sliding windows, stable frame, V-drawbar and so on. Inexpensive horse trailer accessories such as tie-down brackets, feed buckets, weather protection hoods, drawbar protection, trailer lock, aluminum rims and scratching mats are also available. The structure is splash-proof.

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 -Engines: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos -Price/Sale: complete Ledpfxsgy Da Se Adpohk -Overall dimensions: 500/560/H670 mm -Weight: 51 kg

Year of construction: 2023, condition: new, The cable granulator is widely used in copper scrap recycling to separate copper and plastic. The processing capacity is 100-150 kg/h. It can be crushed and separated without classification. It is the best choice for recycling copper scrap. Application V-S10 wire granulator machine is mainly used for processing copper and aluminum wires such as household wires, industrial wires, automobile wires and so on. Design and manufacture 99.99% excellent efficiency and reliability equipment, such as: Copper rice mill, air gravity sorting, electrostatic separation, pre-shredding, vibration screen, magnetic separation conveyor belt, self-cleaning dust separation. Technical Specifications Model V-S10 Power Lhedpepm E U Refx Adpek 17.8kw Range 0.1~30mm Weight 900kg Mea 1550*1500*2100mm Process capacity 100~150kg/h

Condition: excellent (used), Professional dividing table / dividing head BERNARDO BS-1 equipped with a high-quality BISON Ø160 mm lathe chuck. This set is designed for milling machines and precision machining requiring angular division and indexing of parts. Lhsdpfx Ajza Hidjdpok Technical data: • Dividing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw • Chuck diameter: 160 mm • Maximum chuck speed: 3000 rpm • Precise angular scale • Dividing plate with indexing crank • Robust cast iron construction • Ability to perform accurate angular divisions Applications: • Milling polygons • Manufacturing gears • Machining shafts and rotating components • Drilling holes at a specific angle • Tooling and production work Condition: • Used item • Fully complete • Normal signs of use visible in the photos • BISON chuck operates smoothly and securely clamps the part • Scales and dividing mechanism are clear and functional The set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank The item being sold is exactly the one shown in the pictures.

Year of construction: 2023, condition: new, Offer price for a short time only: € 13,500.00 net. Previous price: € 15,000.00 net. Copper cable granulator (cable shredder) can recycle waste copper wire into separated copper and plastic, the process capacity is 50-80kg/h, the dry physical shredding method does not produce pollution. Design and manufacture 99.99% excellent efficiency and reliability advanced technology: ● 10 years durability, High reliability and sturdiness.... ● Copper rate of 99.99% purity. ● Compact design with an affordable purchase price. ● Robust and powerful copper wire grinder with 5 rotating and 2 fixed blades that grinds cable scrap to 3 mm/4 mm/5 mm. ● Airflow gravity sorting system to guide the copper particles out of the insulation. ● Significant vibration separator to separate the copper granules from the insulation by weight. ● Self-cleaning dust collection system to reduce maintenance time and eliminate dust. Ledpfx Adopm E T Tepjhk ● Total 2 small vibrating screen tables at both outlets to get 99.99% excellent pure copper. Application Types of copper and aluminum wire scrap that the C06 wire granulator can process include: Household wires, Industrial wires, automotive wires, etc. Technical specifications Model V-C06 Power output 13kw range 0.1 ~ 30 mm weight 1200kg Mea 1360*1360*1915mm Process capacity 50-80kg/h

Condition: excellent (used), Year of construction: 1978, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 24, overall weight: 140,000 kg, Hot forging hammer 5 ton Kramatorsk type M2147 Nominal weight of dropping parts: 5000 kg Actual mass of dropping parts without upper die: 5080 kg Energy of blow: 12 500 kgm /125 kJ/ Max. number of strokes per minute: 50 Lhodpfxslnlq Do Adpek Ram stroke: 1300 mm Min. distance ram – die holder: 400 mm Distance between columns: 800 mm Die length: 950 mm Die holder length: 1180 mm Dimensions /L x B x H/: 3000 x 2000 x 6470 mm Bottom anvil weight: 23 t Upper anvil weight: 77 t Total weight 140 t

Condition: new, Self-centering 4-jaw chuck designed for mounting on lathes, rotary tables, and milling machines. Mounting according to DIN 55029. Hardened and ground working surfaces ensure a longer service life while maintaining accuracy and repeatability. Balanced scroll plate and chuck allow for higher rotational speeds during machining without excessive vibration. Mounts directly to the machine on a CAMLOCK-type spindle nose. Technical data: Parameter Value Unit Lathe chuck cast iron 4-jaw 3744 BISON A 200 mm Ratio 1:4 5 mm Lhsdpfsyw Tupjx Adpjk B 78 mm E 55 mm F 104.8 mm Q 6 J 29 mm Weight 19 kg Equipment: Lathe chuck One-piece hard external jaws One-piece hard internal jaws Key

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG cutting unit for cutting off edge protrusions on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x Perske engines -Engine Type: -Power: 0.22 kW -Voltage: Volts -Frequency: Hz -Speed: 18,000 rpm -Other engines with different performance levels are available from us for an additional charge. Lhjdpfxob Sab Ho Adpok -Dimensions: 1240/600/H1100 mm -Weight: 296 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x Perske motors -Engine type: KCS 70.12-2D -Power: 3.0/4.4 kW Lhodpfx Ajb R Ua Eedpjk -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 1100/600/H1330 mm -Weight: 340 kg

Condition: good (used), Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -Number: 2 x motors Perske -Power: 0.15 kW -Voltage: 133 volts -Frequency: 200 Hz -Speed: 11,160 rpm -Other engines with other services in stock for an additional charge -Dimensions: 470/400/H620 mm Lhodpfx Ascv H A Njdpek -Weight: 55 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x Perske motors -Engine type: KCS 70.12-2D -Power: 2.7/4.5 kW -Voltage: 220/380/380 Volts Ljdjb R Ua Nepfx Adpshk -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 1060/660/H1010 mm -Weight: 326 kg

Condition: good (used), Modular unit, finishing unit, grinding unit, grinding station, belt sander, belt sander, edge sander, edge sanding machine, profile grinding unit, small belt sander -Belt sanding unit: from belt sanding machine -Type: unfortunately no type designations -Drum motor: Perske type DKAL 2117/2 3.7 kW 2840 rpm Lhsdpfx Adjzrfb Uepok -Roller: Ø 183 x 370 mm -Rollers: Ø 117 x 325 mm -Individual components: see photos -Transport dimensions: 1110/560/H300 mm -Weight: 195 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG cutting unit for cutting off edge protrusions on the front and rear edges -with heavy leadership -Milling unit: swiveling -1x Perske motors -Engine Type: -Power: 0.75 kW -Voltage: Volts -Frequency: 300 Hz -Speed: 8,600 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 940/620/H350 mm Lhedpfxob Sgzae Adpjk -Weight: 54 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG cutting unit for cutting off edge protrusions on the front and rear edges -with heavy leadership -Milling unit: swiveling -1x Perske motors -Engine Type: -Power: 0.75 kW -Voltage: Volts Lodpfx Adsb Sc Svspshk -Frequency: 300 Hz -Speed: 8,600 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 990/620/H340 mm -Weight: 52 kg

Year of construction: 1994, condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.3 kW -Voltage: 165 volts Lsdpsb Uhqaofx Adpshk -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Weight: 64 kg

Year of construction: 1994, condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling Ljdob Uhp Tspfx Adpshk -2x engines Perske -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 500/500/H600 mm -Weight: 54 kg

Condition: new, Year of construction: 2025, machine/vehicle number: sn. 816, functionality: fully functional, total height: 3,500 mm, total length: 3,600 mm, total width: 4,000 mm, cutting height (max.): 1,300 mm, feed length X-axis: 2,600 mm, feed length Y-axis: 1,300 mm, space requirement height: 3,600 mm, space requirement length: 4,200 mm, space requirement width: 4,500 mm, warranty duration: 12 months, Polish manufacturer of machines and equipment for cutting and processing polyurethane foam with over 25 years of experience offers for sale a brand-new automatic horizontal cutting machine, Model: TYPE PARK. The machine features a stable and robust steel construction. Cutting is performed by the movement of the cutting frame along the X and Y axes, while the table remains stationary. The cutting frame is driven by two reinforced toothed belts and moves on linear bearings along the X-axis. In the Y-axis (up and down movement of the frame), the feed is powered by two ball screws and linear bearings. The machine supports both single-sided and double-sided cutting modes and includes an automatic cutting correction system for double-sided cutting. Machine equipment includes: Automatic, self-adjusting saw blade tensioning system Stationary table with powered conveyor belt for easy material loading Automatic cutting length measurement Quick-change system for the saw blade Automatic material clamping system Working parameters: Cutting width: 2100 mm Lhedowq Dvdjpfx Adpek Cutting length: 2500 mm The machine is fully enclosed with safety fencing and equipped with safety light curtains at the loading and unloading zones. As the manufacturer, we provide installation and servicing within the EU. The machine is CE certified. We also offer a wide range of machines and devices for cutting foam and mineral wool. We invite you to explore our full range of products.

Condition: used, Year of construction: 1988, turning diameter over bed 2000 mm turning diameter over slide rest / mm turning length / mm - Type 1 K 671 320 F3 - Year of manufacture 1988 (first commissioned in 1998) - Turning length 10,000 mm - Turning diameter over bed 2,000 mm (modified) - Faceplate diameter 1,950 mm - Faceplate clamping range 400 - 1,350 mm - Speeds 1.00 - 140 rpm - Torque 125,000 Nm - Main cutting force 130 kN max. - Automatic swiveling tailstock - Max. workpiece weight 70 tonnes - Max. workpiece weight with steady rest 100 tonnes - Drive power 100 kW - Number of bed ways 4 Lhodoxn Tz Iopfx Adpjk - Dimensions 22,000 x 6,200 x 2,900 mm - CNC control SIEMENS 840D (2010 for €220,000.00) - Support feed X-Z 0.3 - 4,000 mm/min. - Support rapid traverse X-Z 4,000 mm/min. - Inner cone dimensions 140 x 1:7 - The machine complies with CE guidelines - Includes 2 steady rests, 1 roller block, 4 jaws, boring device - Condition: very good condition

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -2x engines Perske -Motor 1 type: KNS 71.16/201 -Power: 4.4/6.6 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5870 rpm -Motor 2 type: MP-10-L -Power: 1.0/1.5 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 3000/6000 rpm -Other engines with other services in stock for an additional charge -Number: 1x joint milling units available -Price: per piece -Dimensions: 900/1000/H1030 mm -Weight: 360 kg Ljdpfx Adjb Uhi Nspjhk

Condition: excellent (used), • Model: WIDAX WULMIX-HE LINE M68 Ø160 R16 • Mounting: SK40 DV40A SE40 050 tool holder • Diameter: Ø160 mm • Number of insert pockets: large – full set • Insert type: 058 (reusable, replaceable) • Condition: very good, teeth and body without damage, ready for use • Precisely balanced steel body • Manufacturer: WIDAX – Made in Germany • Ideal for CNC milling machines and machining centers with SK40 spindle Lhjdpfx Aexmu A Dodpek

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -The two-motor HOMAG profile milling units ensure corner rounding even when processing veneer -for rounding edges on the front and rear edges of the workpiece and at the bottom Lhjdpfjb Uht Nsx Adpjk -each 2x corner copying units -2x engines Perske -Power: 0.3 KW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Dimensions: 780/470/H340 mm -Weight: 52 kg