Used Orbital Welding Machine for sale (66,299)

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Blsdpfx Anjykvdlopop Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: good (used), Year of construction: 2010, machine/vehicle number: 235654, Offer 26284 Technical data: - Inverter DC welding machine for MIG-MAG – Pulse – Standard – and - E-hand (stick) welding - Welding current 330 A 25% ED - 250 A 60% ED - 210 A 100% ED - Welding current continuously adjustable from 5 to 330 A Bljdpfxj Afwyls Anpop - Wire diameter steel – stainless steel – AL 1.0 / 1.2 mm - Program control M3-10 with 4 main welding programs - Digital display for welding voltage, current and parameters - Adjustable parameters: wire feed speed m/min, welding voltage correction - Dynamics, wire burn-back time, gas post-flow time, etc. - Wire feeder Drive 4 L P with 4-roller drive and program control - Roller wire feed continuously adjustable 0.25 - 24 m/min - 2-cycle + 4-cycle regulation + special functions, spot welding - Water-cooled hose pack approx. 4 m - Ground cable - Pressure regulator - Intermediate hose pack machine – separate wire feeder case 5 m - Connection 400 V - Space required approx. W 500 x H 1350 x D 1050 mm - Weight approx. 200 kg

Condition: used, Year of construction: 2004, operating hours: 2,000 h, functionality: fully functional, input voltage: 240 V, input current: 2 A, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used Miyachi MDB-2000B spot welding machine, year 2004. Input voltage: 200–240 V Frequency: 50/60 Hz Input current: 1.5 A It utilizes a polarity-reversing system, ensuring reliable performance at every welded spot. Throughout the entire welding pulse, it monitors both voltage and current, thereby minimizing undesirable effects. Selectable current ranges: 250 A, 500 A, 999 A, 3.00 kA RS-485 communication Dimensions: 172 x 423 x 270 mm Weight: 19 kg Power consumption: maximum 300 W The system also includes two mechanical setups for battery welding (see photos). They consist of frame with pneumatic drives and necessary end switches for proper triggering of operation. If you have any questions or need more information, feel free to send us a message or give us a call. Bsdpfx Asz S Dy Ijnpslp

Condition: excellent (used), Air-operated, water-cooled 3-phase direct current spot welding machine make DALEX type PMS 11-4 G3 Asload: 650 mm Bljdpfx Aou A Dg Eonpep with special cylinder with low pressure range of 20-120 daN Rated power at 50 % duty cycle 60 kVA Sec. short-circuit current: 25 kA sec. open-circuit voltage: 3.68 V with add-on switch cabinet in accordance with VDE 0100 Main switch Synchronous welding control 8036 Weight: 685 kg

Condition: used, TIG + Shielded Metal Arc Welding Machine MESSER GRIESHEIM Type Uniwig GW 280 AC/DC Serial No. 4930185 Year of manufacture: 1985 Performance for TIG welding: 280 amps at 80% duty cycle (AC) 250 amps at 100% duty cycle (AC) 230 amps at 100% duty cycle (DC) Performance for stick electrode welding: 250 amps at 100% duty cycle (AC) 200 amps at 80% duty cycle (DC) Adjustment range: 3 coarse steps and infinitely variable Power supply: 400 volts, 50 Hz - 4-meter hose package with TIG torch - 2-stroke and 4-stroke welding function - Weld time setting for spot welding - Water-cooled Blsdpfjxf Uw Sjx Anpsp - Gas pressure regulator Required space (L x W x H): 1050 x 590 x 1000 mm Weight approx. 300 kg Good condition

Condition: good (used), Year of construction: 2014, total width: 600 mm, total length: 1,000 mm, total height: 600 mm, Manufacturer: MIBA Type: RNF-65 Year: 2014 Milling cutter laser guided Working range 2000 - 8000 mm Designed for mobile use on a 3000 mm gauge Specifications Metric US Standard There are (currently) no specifications for this machine. Blodpfjwq Hp Tsx Anpjp Dimensions (estimated) There are (currently) no dimensions for this machine. Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Year of construction: 2006, condition: used, Submerged arc welding device, welding accessories, forming gas welding device, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding machine, welding carriage, inert gas welding device, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding device, rail runner -Submerged arc welding machine without: power source -Submerged arc welding machine type: Minisaf 02 -Control box SUBARC 3 -Intermediate hose package -Equipment Bljdpfx Aod Nlf Nsnpep -Dimensions: 1200/800/H500 mm -Weight: 215 kg

Condition: excellent (used), Year of construction: 1996, ESAB LHF 400 Welding Rectifier / Electrode Welder Infinitely variable welding current range up to 400 A, power 400 A at 35% duty cycle, 315 A at 60% duty cycle, weight 165 kg, ... Siegfried Volz Machine Tools Bledpov N Hkcjfx Anpsp Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, welding machine -Manufacturer: Messer Griesheim, MIG/MAG gas-shielded welding machine -Type: Euromag 25-2 -Max. welding power: 250 A Blodpez A R R Tsfx Anpop -Wire feed: 4-roll drive, separate, mobile -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 970/490/H890 mm -Weight: 168 kg

Condition: used, Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm Bledpfjvuz N Rex Anpjp incl. foot switch

Condition: used, MERKLE Insquare W 300 AC/DC Welding Machine with original hose set Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC Range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A TIG AC Range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A Electrode Welding: Electrode diameter: 1.5-6 mm Open-circuit voltage: 80 V Working voltage: 20-32.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 13.1 kVA Primary continuous current: 19 A Primary peak current: 22 A Welding Processes: 10-stage switch: TIG DC Negative, TIG DC Positive, TIG DC Negative with start pulse, TIG AC low-noise, TIG AC Rectangular TIG AC "Balanced TIG", Electrode Negative Electrode Positive Electrode "Sinusoidal" Electrode Rectangular Selector Switch 1: 10-stage switch: Current 1, Time 1, Ramp-up and ramp-down time, Starting current, ending current, Ignition pulse, point time, Pre-gas and post-gas time Selector Switch 2: 9-stage switch: Current 2, Time 2 (for pulse operation), AC balance, AC frequency, Hot start time and current, Current adjustment, Electrode diameter, display U Settings: 2 potentiometers for selector switch 1 and 2 Displays: 2 LED displays with preview and hold function for current, voltage, time, frequency Time functions: 4-stage switch: OFF, Slow pulsing, Fast pulsing, Spot welding Ignition: 4-stage switch: OFF, High frequency, Lift-TIG Energy control: 4-stage switch: on the unit, Hand or foot remote control, Welding torch Operating mode: 4-stage switch: 2-stroke, 4-stroke, 4-stroke with 2 currents, Gas test, Test, Program Bodpfx Asl Sm Hbsnpjlp Program memory: 20 memory locations freely assignable AC frequency: 50-200 Hz AC balance: 9-91 % Pre-gas time: 0-3 s Post-gas time: 0-25 s Current rise time: 0-2 s Current fall time: 0-20 s Ignition pulse: 0-100 ms Spot time: 0.1-2.5 s Slow pulsing: 10 ms-2.5 s Fast pulsing: 50 Hz-5 kHz Hot start time: 0-1.5 s Hot start current: 10-200 % Current adjustment: 100-250 % Button: Test protection device Button: Program selection LED: Power ON, Over temperature, Fault, Protection circuit, Display hold, Start current Rise, Current 1, Current 2, Fall, End current Power source: IGBT inverter Ignition: High frequency or Lift-TIG Standard: EN 60974-1 "S" / CE Torch connection: EURO central connection with 5-pin connector Torch cooling: Water circulation cooling system Socket 50 mm²: Workpiece cable Socket 50 mm²: Electrode welding cable Power connection: 4 x 4 mm², 5 m long Gas connection hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder Gas bottle holder: 10 - 20 - 50 l gas bottle More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Spot welding machine with single-acting cylinder and flange-mounted electrode holders above and below Make: DALEX Type: PMS 14-3 Blsdpfxotuwz Is Anpsp Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 54.5 kA Secondary open circuit voltage: 7-14 V Electrode force: 80-1,200 daN Equipped with: 8-step switch Main switch Attached control cabinet HARMS+WENDE Synchronous welding control MPS 200 8 welding programs with AEG nameplate Start via foot pedal

Year of construction: 1990, condition: ready for operation (used), With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible. Bsdpfx Anjq Ttz Nepelp

Condition: used, WIG and electrode inverter welding unit ESS Type 170 ATG (AC-DC) TIG welding machine Serial No. Year of manufacture: 2007 TIG output 170 amps = 35% duty cycle 130 amps = 60% duty cycle 110 amps = 100% duty cycle Blodpfjrtvi Usx Anpop Electrode output 140 amps = 35% duty cycle Mains supply 230 Volt, 50 Hz - DC and AC welding - HF ignition - stepless power adjustment - 2-stroke and 4-stroke operation - pulse welding mode - stick electrode operation - 8 meter hose package with TIG torch - shielding gas pressure regulator - fan cooling - portable Equipment dimensions (L x W x H) 400 x 270 x 500 mm Weight 26 kg The welding test shows very good results when welding stainless steel with DC current and very good results when welding aluminium with AC current. Overall in very good condition.

Condition: good (used), Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg Blodpfxeqvp Nkj Anpop

Condition: used, WIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) WIG Welding Machine Serial No. Year of manufacture: 2007 WIG output: 225 A = 40% duty cycle 180 A = 60% duty cycle 140 A = 100% duty cycle Electrode output: 180 A = 50% duty cycle Power supply: 400 Volt, 50 Hz, 16 Amp plug - DC welding unit - stepless power adjustment - 2-stroke and 4-stroke operation - HF ignition - pulse welding mode - stick electrode mode Bjdpfxsrtvi Rj Anpslp - water-cooled - 8 meter WIG hose assembly with hand torch - shielding gas regulator - operating manual Space requirement (L x W x H): 1000 x 450 x 710 mm Weight: 90 kg The welding test produced very good results when welding stainless steel with DC. Otherwise in very good overall condition.

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate made from a tool steel Length: 2980 mm Width: 1580 mm Thickness: 94 mm Bedpjhwn Tuofx Anpslp - solid steel plate - surface milled - 4 pieces of bolted support brackets - plate with some symmetrical holes Own weight: 3400 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, laser type: fiber laser, laser source manufacturer: Rofin, laser source model: FL40, laser power: 4,000 W, laser wavelength: 1,070 nm, input voltage: 400 V, input current: 40 A, input frequency: 60 Hz, type of input current: three-phase, We offer this Rofin FL40 laser welding machine in very good condition, manufactured in 2017. Nominal power: 4000 W Power range: 10 - 100% Laser beam quality: 3 - 4 (Multi Mode 100 µm) mm·mrad Power stability: ±2% Pulse frequency range: CW - 5 kHz Wavelength: 1070 ±10 nm Maximum possible power (950-1100 nm): 8000 W Maximum possible power (1100-1150 nm): ≤100 W Supply voltage: 3 x 230/400 V ±10% or 3 x 277/480 V ±10% Mains frequency: 50 or 60 Hz Apparent power at the beginning of module life: 12.7 kVA Active power at the beginning of module life: 11.8 kW Current consumption at 400 V at the beginning of module life: 18.4 / CCU: +0.5 A Apparent power at the end of module life: 15.2 kVA Active power at the end of module life: 14.2 kW Bedpfx Ajzcf T Tenpelp Current consumption at 400 V at the end of module life: 22 / CCU: +0.5 A Current consumption at 480 V at the end of module life: 18.3 / CCU: +0.5 A Fuses: 40 A If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: used, AC spot welding machine, projection welding machine ARO Type MA 350 DC AC resistance welding machine Machine No. MA35031332 / 9731122B110 / Year of manufacture 1997 Power at 50% duty cycle 30 kVA Power at 100% duty cycle 21 kVA Maximum welding power 156 kVA Reach 550 mm Electrode arm diameter 60 mm Electrode holder diameter 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Bjdpfx Anshpf Iyjpslp Operating air pressure 0.5 to 6 bar Mains connection 400 Volt, 50 Hz Connected power 75 kVA / 63 Amps / Conductor cross-section 3x 16 mm² Possible sheet metal combination max. 5 mm + 5 mm - Welding control ARO Micro 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuously adjustable welding current via thyristor module - Parallel electrode guidance - Double-stroke welding cylinder (pre-stroke / welding stroke) - Operating mode: single stroke and series of spots - Electrode force continuously adjustable via air pressure - Water-cooled via external water cooling (water chiller not included) - Electric foot switch - Control cabinet with control unit permanently mounted on the machine - PC interface RS 485 - Welding point counter - Operating manual for control unit, spot welding machine and electrical diagram available Space requirement W x H x D 520 x 1550 x 1150 mm Weight 290 kg Very good condition

Condition: used, functionality: fully functional, Multi-function welding machine (MIG, TIG, electrodes) Brand: Kemppi Model: Pro 3000 / Promig 500 Water-cooled unit with Kemppi PRO Cool 10 chiller. TIG/electrode welding unit Kemppi PRO TIG 410 - Kemppi TL control panel - Functions for TIG welding: pre-gas, post-gas, arc, high frequency TIG generator Kemppi Pro 3000 MIG/wire welding unit Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Kemppi ML SYNERGIC control panel - 4 feed rollers - Pulsed arc current with Synergic panel - Dedicated functions for welding steel, stainless steel and aluminum Includes: - TIG welding torch Blodpsxf Hv Hjfx Anpop - MIG welding torch - Earth cable - Gas regulator

Condition: excellent (used), Air-operated, water-cooled rocker-arm spot welding machine Brand DALEX Type SL 16/S Bedpfov Sql Nex Anpslp Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Secondary open-circuit voltage: 1.8 - 3.5 V Electrode force: 278 daN Arm reach: 180-500 mm adjustable Arm spacing: 140 or 300 mm With 8-position switch for power preselection Additional control unit 1036

Condition: good (used), Welding current: 10 - 200 A Weight: 103 kg Bjdpfjyrglcex Anpjlp Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 2018, condition: ready for operation (used), Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) Hürner are available. Years of construction: 2x 2016 and 1x 2018, working range OD: 40mm-160mm, power: 2.85kW, reduction inserts: 40/50/63/75/90/110/125/140, weight: approx. 80kg. Documentation available. On-site inspection is possible. Blodpfx Ansviv Azepjp

Condition: ready for operation (used), Year of construction: 2020, Longitudinal sealing: continuous, photo cells: horizontal/vertical, working height range: 760mm-960mm, max. transport speed: 30m/min, film core diameter: 76mm, max. film roll diameter: 350mm, max. film roll width: 650mm, sealing stamp width: 300mm, product width range: 50mm-410mm, product height range: 1mm-250mm, min. product length: 50mm, film thickness range: 7µm-80µm, max. output rate: 85cycles/min, materials: POF/PE/PVC/PLA/bio films. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/1800mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Bedpfx Anjxuvnqjpelp

Year of construction: 2012, condition: ready for operation (used), A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible. Bljdpfxsxr Nwas Anpep