Used Oximat for sale (1,337)

Condition: used, machine/vehicle number: YV2AP90DXBA71xxxx, mileage: 630,000 km, Year of construction: 2011, Please contact ATS Norway for more information Please provide reference number upon request: 22082 Specifications: Model year: 2011 Mileage: approximately 630,000 km EU approved until 20.05.2026 Euro 5 Wheelbase: 490/136 cm 700 hp Retarder Air suspension Tandem Lasdpfx Agox Izqtozok Diesel heater Onspot Tires (see pictures) Galvanized aluminum body Clutch replaced Gearbox serviced and circuit board replaced Compressor horn Roof lights Tool box Automatic transmission AC/Climate control 2x beds Radio Delivery by agreement Description: 2011 Volvo FH16 with 700 horsepower. It has onspot functionality. Delivery by agreement. Km: 630000 HK: 700 Technical approved: Yes EU-approved until: 20.05.2026 Own weight: 11400 Total Weight: 29500 Payload: 18025 Width: 255 Length: 937 Kw: 515 Euro: 5 Model: FH16 700 Gearbox: Automatic

Condition: used, Used Winkworth model PV3000 approximately 3,000 litre stainless steel process vessel. Unit measures approximately 1800mm diameter x 1800mm straight side. External jacketed rated 3.5 bar pressure at 200 deg.c. Unit has a welded flat top and welded conical bottom. Unit has a top entry stainless steel contra-rotating gate agitator with pitched blades driven by (2) geared motors: a 9.2kW geared motor operating at 14.8rpm and a 7.5kW geared motor operating at 27.2rpm. Unit has a bottom entry Silverson BE600 homogeniser with a square hole disintegrating head driven by a 22kW motor. Unit includes a bottom entry discharge pump. Unit is mounted on (3) legs. Lodpfex Ifiyex Agzoak

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 34 h, load capacity: 8,000 kg, lifting height: 3,440 mm, free lift: 1,170 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, fork carriage width: 2,120 mm, fork length: 2,400 mm, empty load weight: 12,500 kg, total length: 4,100 mm, drive type: Diesel, construction width: 2,130 mm, Diesel Forklift Load center of gravity: 600 Fork width: 150 mm Fork thickness: 70 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: New Front tires type: Superelastic Front tires size: 8.25-15 non-marking Rear tires type: Superelastic Rear tires size: 8.25-15 non-marking Description: In addition to this Clark model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, would be happy to advise you in detail about this C80D. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom builds for forklifts weighing 8 tons and over. We would also be happy to display your vehicle for consignment sale. Ledpfxov Ihkhj Agzoak Sideshift, fork positioner, Heating, full cab, full free lift, DPF

Condition: used, machine/vehicle number: YV2J1F1C9BA70xxxx, mileage: 139,917 km, Year of construction: 2011, Please contact ATS Norway for more information Please provide reference number upon request: 22065 Specifications: 2011 model 139,917 km Manual transmission Euro 5 6x2 419 hp Tank volume:10,000 liters Remote control Approximately 6600 pump hours Errors and omissions may occur. Error codes in the display (see pictures) Supersucker Disabled building Hydraulic opening when emptying Ljdex Ip Sfjpfx Agzjak Tires (see pictures) Front suspension: steel Rear spring: air Air conditioning/ac Radio Light Ready for delivery   Description: We have a 2011 Volvo FM 6x2 super suction w/ Disab p build for sale. The car has error codes on the display. There are errors on, among other things, the engine cooling valve. But the engine starts and runs. The structure functions as it should, but is worn after many years of operation. Errors and defects may occur and some cost is calculated. All services have been taken care of by the owner in his own workshop. Ready for delivery. Km: 139917 HK: 418 Technical approved: Yes EU-approved until: 18.08.2026 Own weight: 20900 Euro: 5 Model: FM Gearbox: Manual

Condition: used, Used Breddo model LORWW 100 US gallon (378 litre) capacity stainless steel vertical jacketed mixing vessel/Likwifier. Has approximately 1200mm diameter X 470mm deep tank with welded cone bottom and flat open top with hinged lids. Has approximately 250mm diameter bottom entry general purpose impeller belt driven by 30 hp 415 volt 3/50 1500 rpm motor with Allen-Bradley Powerflex 70 inverter drive. Also includes baffle bar. External jacket rated 125 psi (8.6 bar) working pressure at -20/+400 degf (-29/204 degc). Mounted on stainless steel mobile base with diaphragm pump local controls. Specifications: Capacity: 100 gal Diameter: 3.94' Height: 1.54' Vertical/Horizontal: Vertical Lodpsx Hwb Sofx Agzsak Type of stainless: Stainless Steel Legs/Lugs: Mounted on stainless steel mobile base

Condition: used, Year of construction: 2014, operating hours: 11,000 h, Serial number: KMTPC240J55K6xxxx Please contact ATS Norway for more information Please provide reference number upon request: 17924 Specifications: 2014 model Hours: Approximately 11,000 Ljdpfovg Nr Dsx Agzsak Weight: 25,500 kg Power: 141 kW Chassis (see pictures) Gjerstad S70 attachment Engcon tiltrotator SMP sanding bucket Central grease Belt width: Approx. 60 cm Width of the machine: Approx. 320 cm Cracks in the windshield (see photos) Rear view camera Extra light Rotor lamp Radio/CD Air conditioning/AC Previously under service agreement Description:Komatsu PC240, 2014 model, sold with Engcon rototilt and SMP sanding bucket.The machine has a service agreement and has been regularly serviced throughout its life. The turbo has recently been replaced. The GPS unit is not included.Last service was performed at 10,500 hours.Delivery can be done quickly. Hours: 11000 Own weight: 25500 Total Weight: 25500 Width: 320 Kw: 141 Model: PC240LC-10

Condition: used, Used Stainless Services Ltd approximately 1,370 litre 316L stainless steel vertical storage tank. Unit measures approximately 1200mm diameter x 770mm straight side. Unit has welded dished top and welded cone bottom heads. Internal rated 2.5 bar design pressure at 150 deg.c. Unit mounted on (4) legs. Specifications: Capacity: 361.9 gal Diameter: 3.94' Height: 2.53' Laedpfx Agex Hwb Eszsk Type Of Heads: welded dished top and welded cone bottom Vertical/Horizontal: vertical Type of stainless: 316L Legs/Lugs: 4

Condition: used, operating hours: 4,500 h, Field of application: Construction Serial number: 30xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21752 Specifications: Lsdsxvlc Tjpfx Agzsak Hours: approx. 4500 Capacity: 20 tons Winch Tires (see pictures) Outriggers New batteries Description:Kato KR-20 mobile crane with approximately 4500 hours.The crane is functional but no longer certified (last certified 11/2023).20-ton capacity.There is a contact fault in the horn, so it does not make a sound when the crane is extended.Can be delivered at short notice. Hours: 4500

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Specifications: Power: 11 kW Laodpfjx Hv U Rox Agzek

Condition: used, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 21789 Specifications: 2006 model Hours: approximately 12,200 Weight: 28500 127 kW Last certified October 2023. Chassis (see pictures) Excavator bucket Central lubrication is installed, although it is uncertain whether this works. LED light Heater Radio/CD Lasdpfx Aoxwkkfjgzjk Ready for delivery Notes: The machine is delivered without certification. Supplied with digging bucket. Description: 2006 New Holland Kobelco E 265 with flap excavator bucket for sale. The excavator has run for approximately 12,200 hours. Ready for delivery.   Own weight: 28500 Model: E265 med graveskuffe

Condition: used, Used Oliver & Batlle model HM-15 stainless steel bead mill. Has stainless steel jacketed chamber which measures approximately 450mm long x 250mm diameter. Ljdpfx Ajx Hv Udjgzsak Approximate total capacity 15 litre (product dependent). This equipment has a stainless steel rotor belt driven by 18.5kw, 415volt, 3/50, 1460rpm motor. Click on the link below to see a video of the machine running.

Condition: used, Year of construction: 1995, operating hours: 6,100 h, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21807 Specifications: 1995 model Ljdpfxexw Ni Tj Agzeak Approximately 6100 hours Poor suspension Errors and omissions Cleaning bucket Sorting tray Narrow drawer Direct attachment to the pole Starts and runs Sweating of hydraulic oil from cylinders (boom and stick) Import machine Sweating from hose from tank to central Ready for delivery Description: We have a 1995 Komatsu PC60-5 excavator with dredging bucket, screening bucket and narrow bucket for sale. The machine starts working as it should, but has errors and deficiencies as mentioned above in the specifications. Some cost must be taken into account. Ready for delivery Hours: 6100 Own weight: 1 Model: pc60-5 gravemaskin m/ renskeskuffe,soldeskuffe og smalskuffe

Condition: used, Unused from new Caldereria Teruel (Spain) approximately 1,000 litre 316L stainless steel IBC. Internal measures approximately 1110mm diameter X 1230mm straight side. Mounted on stainless steel forkliftable base. Hinged manway lid on top dish with fast release clamp. 40mm side bottom discharge with valve. Includes 12 months warranty. In stock and immediately available. Ljdpfx Ajx Hv T Tjgzoak Specifications: Material Grade: 316L Stainless Steel Dimensions: 1110mm diameter X 1230mm straight side

Condition: used, Year of construction: 2016, operating hours: 18,100 h, Serial number: CAT098MAN8T0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22005 Specifications: 2016 model Lajdpfjx Ib Irsx Agzok Hours: approximately 18,100 313 kW Weight: 29500 kg Tires (see pictures) Drawer (see pictures) Valve that needs to be replaced AC/climate Radio Services taken by owner Ready for delivery   Description: 2016 CAT 980M wheel loader with bucket. The owner believes it is an overhead valve that needs to be replaced. If the wheel loader receives a hard impact, the valve opens. The owner further states that he has simply stopped the wheel loader and started it again and then it functions normally. Watch video. Ready for delivery. Hours: 18100 Own weight: 29500 Kw: 313

Condition: used, Used Gericke type N450x800 MK2 nibbler. Unit has mild steel body with stainless steel 4-blade rotor, screen frame & screen. Unit direct driven with motor/gearbox. Has approximate throughput capacity of 30,000 l/h (product dependent). Lsdpfx Aex Hv T Hjgzeak Equipped With: Per RD 13/06/25 on hold for CcM Technologies, UK.

Condition: used, machine/vehicle number: WDB9642141L84xxxx, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 22053 Specifications: Not EU approved Model year: 2015 Mileage: approx. 394,000 km Automatic transmission All-steel body Tires (see photos) Retarder Euro 6 Length: 770 cm Width: 255 cm Wheelbase: 330 / 135 cm Curb weight: 13,790 kg Drivetrain: 6x4 Power: 578 hp Laedpjx Ib Ifefx Agzok Trailer hitch Air horns Radio/CD Climate control / AC Description:2015 Mercedes Arocs tandem tipper truck.The vehicle has driven approximately 394,000 km.All brakes were replaced in 2024.Available for delivery on short notice. HK: 577 Technical approved: no EU-approved until: 22.09.2025 Own weight: 13790 Total Weight: 28000 Payload: 14135 Width: 255 Length: 770 Euro: 6 Model: Arocs 6x4 Tippbil Gearbox: Automatic

Condition: used, Used Niro Mobile Minor stainless steel laboratory spray dryer. This unit has an approximate evaporation rate of 1 to 7 kg/hr depending on product. Has stainless steel chamber approximately 800mm diameter x 915mm straight side. Chamber is lagged and clad. Has electric heater, cyclone and pipework. Unit is mounted on mobile frame. Includes stainless steel Niro centrifugal air operated atomiser. Ledpfxox Hv Tye Agzoak Click on the link below to see a video of the machine running.

Condition: used, machine/vehicle number: YS2R6X4000218xxxx, mileage: 816,000 km, Year of construction: 2022, Please contact ATS Norway for more information Please provide reference number upon request: 22062  Specifications: EU approved until 28.04.2026 Mileage: 816,000 km Transmission: Automatic Full air suspension 6x4 Tires in good condition Refrigeration/freezer unit Euro 6, 660 hp 18-pallet box body Box body from 2019–2021 (to be confirmed by owner) Partition wall Internal length: 7.42 m Internal height: 2.85 m External height: approx. 4.2 m Bull bar Sand spreader Tool box Trailer hitch VBG coupling 2 bunks Radio/CD Climate control / AC Service history Video available Ready for delivery Description: 2022 Scania R660 6x4 box truck.The vehicle is EU approved and ready for delivery.18-pallet box with refrigeration/freezer unit, box body from 2019–2021.Possibility to purchase 3 identical trucks with approximately the same mileage. Laedpfsx Ip R Isx Agzjk Km: 816000 HK: 659 Technical approved: Yes EU-approved until: 28.04.2026 Own weight: 13900 Total Weight: 28000 Payload: 14025 Width: 255 Length: 1021 Euro: 6 Model: 2022 Scania R660 6x4 Skapbil m/ Kjøl/frys aggregat Gearbox: Automatic

Condition: used, Used Tycon approximately 6,000 litre working capacity and 7115 litre total capacity type 808 blue glass lined receiver vessel. Unit measures approximately 2,000mm diameter x 1680mm straight side. Unit has welded dished top and bottom heads. Internal rated full vacuum/2 bar design pressure at -10/+200 degC. Unit mounted on (4) mild steel legs. Lodpjx Hv R Sofx Agzoak Specifications: Capacity: 1,585 gal Condition Of Glass: Used Internal Pressure: 14.5038 psi Internal Temperature: 392°F Vertical/Horizontal: Vertical Diameter: 78.74" Straight Side: 1680

Condition: used, Used Netzsch approximately 1,000 litre stainless steel vertical jacketed mixing vessel. Unit has welded flat top and bottom heads. External jacket rated 3 bar working pressure. Unit has top entry stainless steel anchor type agitator with drive and stainless steel high shear agitator with drive. Unit is mounted on (4) legs with forklift attachment. Ledpfox Hv Scsx Agzeak Specifications: Capacity: 264.2 gal Type Of Heads: Flat top and bottom heads Vertical/Horizontal: Vertical Legs/Lugs: 4 legs with forklift attachment

Condition: used, Used Pfaudler model CE10000 vertical glass lined reactor. Approximately 10,000 litre capacity. Internal rated 6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 7.5 bar/full vacuum design pressure at -29 to 200 deg.c. Unit has welded dished top and bottom heads. Top entry 3-blade retreat curve agitator with Pfaudler VSO gearbox and drive. Unit has mild steel mounting ring. Specifications: Capacity: 2,641.7 gal Ljdsx Hv R Espfx Agzoak Material of construction: Glass lined, External mild steel jacket Internal pressure: 87 PSI Jacket pressure: 108.778

Condition: used, Comprehensively tested, used Kemutec 316 stainless steel ribbon blender. Manufacturer: Kemutec Material: 316 Stainless Steel Capacity: Approximately 50 Litre Capacity Mixing Trough: Approximately 540mm x 320mm x 400mm Discharge Type: Manual Plug Valve Type Of Mixer: Single Interrupted Ribbon Ljdpjx Hv N Uefx Agzjak Motor: 2.3 kW Also includes: Local controls, stainless steel hinged lid with clamps and perspex cover and stainless steel mobile frame. Click on the link below to see a video of the machine running. Specifications: Capacity: 1.8 ft³ Material of construction: 316 Stainless Steel Horsepower: 3.1 hp Dimensions: 21.26 x 12.60 x 15.75

Condition: used, Used Hosokawa Micron Ltd model MICRON RI 12 K322 CF inline disintegrating slurry mill. Product contact parts in stainless steel. Unit has a throughput capacity of approximately 100 to 120 cumt/hr (product dependent). Working pressure rated 10 bar with a design temperature of 0 to 100 deg.c. Unit is belt driven by 37kw motor. Unit is mounted on a mild steel stand. Ledpfxex Hv I Rj Agzsak Click on the link below to see a video of the machine running.

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Laedox Hv Iwjpfx Agzok

Condition: used, Used Caleva Model 380A stainless steel spheronizer. Unit has a 380mm diameter bowl. 250g to 5kg batch size with an approximate output of 50kg per hour. Unit is driven by a 1.5kw, 415 volt, 3 phase, 50 hz motor. Mounted in stainless steel cabinet. Laodex Hv Iqepfx Agzok