Used Packing Machine for sale (66,279)

Condition: good (used), Robopac Ariane 6050/2TA Lsealer shrink tunnel Serial: KN055476 L sealer sealing bars 600mm x 500mm, into shrink tunnel aperture 450mm x 200mm, adjustable controls, mobile, 3Ph Ndjdpfett D S Hox Amtec

Condition: used, Mosca RO-TRP-4 automatic strapping machine Features: • Can be integrated into any line • Direct conveyor system with frequency control, adjustable from 0.15 – 0.8 m/s Ndsdpfjt Srxgex Amtsc • IFM Ecomat 100 control unit with display • Hot-sealing system with electronic heating control • Fully automatic strapping tape threading system • Adjustable strapping distance via the control panel • Adjustable strap tension • Detection of the end of the tape with ejection of the remaining tape • Automatic ejection of the strapping loops in case of incorrect strapping • Structure painted blue – RAL 5010 The passage opening is 74 cm wide and 53 cm high. Strapping capacity: Up to 46 straps/min. Electrical power: 400 V, 50/60 Hz, 3 phases Consumption: 1.5 kVA Weight: 300 kg. You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Technical details: Ndedpfou Nu E Sex Amtoc table height: 800 mm table rotating: 360 ° table: 800 mm height over floor: 940 mm temperature: max. 450 °C electrics - voltage/frequency: 220/50 V/Hz total power requirement: 1,1 kW space requirements of the machine approx.: T:0,8xB:1,0xH:1,6 m With this machine can be packed parts respectively shrink-wrapped. There is a table with 4 stations on the machine. Can be purchased together with vaccum welding machine. i.D. *

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister machine, manufactured in 1991. This is a high-performance, continuous-flow blister sealing machine with card feeder, suitable for film thicknesses of 150 µm to 400 µm (possibly higher, but not personally tested). The entire line is offered for sale (see pictures). Speed: 1–9 cycles/min with 4-up tooling. Example: fragrance dispenser, 4 units per blister tray = 2000 blisters/hour. Dimensions: approximately 9m x 1m x 2.25m. Sealing platen size: 57x32cm. The machine was 100% functional until it was dismantled and properly stored in our machine warehouse and was in operation until recently. Inspection of the dismantled system is possible on-site. An identical machine is still in operation on-site. A sample packaging can be installed for a test run to demonstrate the functionality. Location: Czech Republic (10 minutes past the Bavarian/Czech border from Furth im Wald). Ndjdpfx Amjy Anifjtec

Condition: like new (used), Year of construction: 2002, functionality: fully functional, total width: 600 mm, total height: 1,540 mm, total length: 1,420 mm, Automatic strapping machine for plastic strapping Frame dimensions: 850x600 mm Nodsz Ibqhspfx Amtodc

Condition: used, Year of construction: 1999, functionality: fully functional, cutting length (max.): 1,800 mm, Equipment: CE marking, documentation/manual, PACKED WOOD SECTIONING MACHINE STORTI MOD. TGS P12 - Minimum pack length 1000 mm - Maximum pack length 5000 mm - Minimum pack width 300 mm - Maximum pack width 1200 mm - Minimum pack height 500 mm - Maximum pack height 1200 mm - Conveyor belt width 1250 mm - Feed speed 9.5 m/min Ndjdpfjx Srtmsx Amtjc - Drive motor 0.35 kW - Cutting bar length 1800 mm - Cutting bar feed speed 66 mm/min - Chain motor 14.5 kW - Number of programs 9 - CE rules - Year 1999

Year of construction: 2025, condition: new, Premade pouches packaging/filling and closing machine, rotary operation with 6 working positions. Suitable for flat pouches and doypack style pouches. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(200-450)xW(200-300)mm. - Technical specifications: max. speed of the machine in neutral: 30 cycles/minute; power: 380V, 3.5kW; compressed air: 0.6m³, 6bar; machine dimensions: L2500xW1800xH1800mm; weight: 1200kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ndsdpfjv Nlmiex Amtec

Condition: new, Year of construction: 2025, Premade pouches packaging/filling and closing machine, rotary operation with 8 working positions. Suitable for flat pouces and doypack style pouches with/without zipper or spout. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed, especially for zipper or spout bags. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(200-450)xW200-300)mm. - Technical specifications: max. speed of the machine in neutral: 30 cycles/minute; power: 380V, 4.0kW; compressed air: 0.6m³, 6bar; machine dimensions: L2500xW1800xH1800mm; weight: 1400kg. Njdpfxsv Nlmve Amtodc That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Premade pouches packaging/filling and closing machine, rotary operation with 6 working positions. Suitable for flat pouches and doypack style pouches. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(100-350)xW(100-210)mm. - Technical specifications: max. speed of the machine in neutral: 45 cycles/minute; power: 380V, 2.5kW; compressed air: 0.6m³, 6bar; machine dimensions: L2214xW1850xH1640mm; weight: 1000kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ndjdpsv Nlmcsfx Amtoc

Year of construction: 2025, condition: new, Premade pouches packaging/filling and closing machine, rotary operation with 8 working positions. Suitable for flat pouches and doypack style pouches with/without zipper or spout. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed, especially for zipper or spout bags. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(100-350)xW100-210)mm. - Technical specifications: max. speed of the machine in neutral: 45 cycles/minute; power: 380V, 3.0kW; compressed air: 0.6m³, 6bar; machine dimensions: L2500xW1800xH1800mm; weight: 1100kg. Njdsv Nlmpjpfx Amtjdc That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Packaging machine to pack multipacks of small tissue packs. Possible arrangements of single packs: 2x3, 2x4, 2x5, 2x6, 3x3, 3x4, 3x5 and 3x6 pcs. Including infeed conveyor. - Specifications: sizes for the single bags (to be arranged in multipacks): L(75-105)xW(50+/-2)xH(24+/-2)mm, multipack sizes ca.: L(150-300)xW(75-105)xH(48-72)mm; max. speed of the machine in neutral: 25 cycles/minute; power: 380V, 2.5kW; 0.5m³, 6bar; machine dimensions: L2300xW1250xH1450mm; weight: 1000kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nedpfev Nmbzjx Amtodc

Condition: used, Year of construction: 2019, Vertical packaging machine (VFFS) with servo drives and Videojet printer This Wolf VPC 250 is a vertical form-fill-seal machine built in 2019 by Wolf Verpackungsmaschinen. It forms bags from reel-fed film, fills and seals them, and can be combined with multihead weighers, linear weighers, auger fillers and other dosing systems. According to the specifications for the VPC 250 series, it makes bags of approx. 50 to 250 mm wide and 80 to 450 mm long, from film up to approx. 600 mm wide, with a fill volume of up to approx. 6 litres. What is achievable depends on the installed forming set, the product and the film. The machine has a Siemens SIMATIC touchscreen with PackML control, SEW drives and servo-controlled functions, dual vacuum-assisted film pull belts, a photocell for printed film and an integrated knife. The front and rear cross seals and the vertical seal each have their own temperature control. An integrated Videojet DataFlex 6320 thermal transfer printer prints dates, batch numbers and barcodes directly onto the film. Spare film pull belts and parts are available with the machine. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Vertical form-fill-seal machine (VFFS) Bag width: approx. 50–250 mm Bag length: approx. 80–450 mm Max. film width: approx. 600 mm Max. fill volume: up to approx. 6 litres Controls: Siemens SIMATIC touchscreen, PackML Njdpjz I Inasfx Amtodc Drives: SEW, servo-controlled Printer: Videojet DataFlex 6320 (thermal transfer) Construction: Stainless steel Machine number: 2511

Condition: used, Conveyorized chamber vacuum packaging machine for industrial food processing This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Conveyorized chamber vacuum packaging machine (belt) Output: 2–3 cycles per minute Sealing: Bi-active sealing bars, electronic temperature control, adjustable contact pressure Trim removal: Perforation blade with bag waste suction on both sides (B-version) Njdpfoz Nc Nnjx Amtodc Vacuum control: Evacuation stops at the evaporation point Construction: Stainless steel, all-enclosed

Condition: good (used), Year of construction: 1998, total length: 52,000 mm, total height: 17,000 mm, total width: 20,000 mm, overall weight: 1,600 kg, GHD Hartmann GBK-420 Bread packing machine Capacity- up to 60 pcs/min, product depended Condition – As seen in video, good, maintained. Inverters, safty relays, additional electrical componenets were recently replaced. Ndsdpfx Astryd Ajmtoc Products: Whole breads, not sliced, Length: up to 400 mm, Width: up to 260 mm, Height: up to 170 mm Can also pack connected burger buns. upto 120mm

Condition: used, VC999 single-chamber vacuum packaging machine – pre-owned Mobile single-chamber vacuum machine from VC999 (Inauen Maschinen AG, Herisau, Switzerland), stainless steel floor model on castors with an oil-lubricated VACFOX rotary vane pump. Key features - One spacious vacuum chamber with a raised filling plate to set the product height - Seal bar across the full chamber width, suitable for bags up to the full width of the chamber - Oil-lubricated VACFOX rotary vane pump: deep final vacuum and a long service life - Mobile floor model on castors, easy to move around the production floor - All-stainless housing, built to take daily cleaning - Digital control with programme memory: vacuum, seal and venting times stored per product Applications - Meat and cured meats - Fish and seafood - Cheese and dairy - Ready meals - Butchers, fish processors and foodservice Benefits - Extends the shelf life of the product - Protects quality and freshness - Swiss build quality, made for intensive use - Mobile, so you can use it wherever it is needed - STC keeps parts for vacuum machines in stock Nodpfoz Hqycox Amtsdc Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full details on our website: [](/) Machine type: Single-chamber vacuum machine Condition: Pre-owned Design: Mobile floor model on castors Vacuum pump: VACFOX rotary vane, oil-lubricated Seal bar: One seal bar across the full chamber width Material: Stainless steel Origin: Inauen Maschinen AG, Herisau (Switzerland)

Year of construction: 1998, condition: used, DESCRIPTION : STRAPPING MACHINE BRAND MOSCA TYPE RO-M-P2 YEAR 1997 Nodpfx Aofwmwxsmtsdc Max. boxes: 400 x 500 mm Electrical power:220 VOLT 0.5 Kw DIMENSIONS: 2300 x 1100 x 1800 mm

Year of construction: 2017, condition: ready for operation (used), A foam bag system for packaging smaller and individually manufactured parts is available. Packaging capacity: 16 bags/min, film type: perforated, bag dimensions 1 X/Y: 470mm/400mm, bag dimensions 2 X/Y: 470mm/600mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/700mm, weight: approx. 30kg, control: Instapak 901. Includes two component filler, spare parts, and foil bags. Documentation vorhanden. An on-site inspection is possible. Nodpjx A Hg Hofx Amtodc

Condition: used, Fully automatic MOSCA strapping machine RO-TR 700-2 Manufacturer: Gerd Mosca GmbH Type: RO-TR700-2 PLC control Operator panel for setting operating modes, strapping intervals, and band tension PP straps suitable for the machine, widths 5, 6, 7, 8, 9, or 12 mm Operating voltage: 400 V 3-phase Nodpfx Aetzbhcemtedc Current consumption: 3 A Power: 2.1 kW Frequency: 50 Hz Rollers: four swivel rollers, two of which can be locked Overall dimensions: approx. 1350 x 1200 x 1650 mm (W x D x H) More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Skinetta ASK 450 Stretch Banding Machine Intended use of the machine: The stretch banding machines in the SKINETTA series are designed for tightly wrapping individual or multiple products with polyethylene film. In contrast to shrink-wrapping machines, the film is stretched tightly around the packaging before sealing. This tension is the main advantage of the process, reducing film consumption by up to 20%. A particular advantage of the patented SKINETTA sealing system is the stepless, precise metering. The film is sealed in a very small area (welded), creating a clean seal with minimal overhang. By using a SKINETTAther or SKINETTAshrink hot air hood and a sufficiently wide film, the overhanging film overhang can be reduced laterally. This increases the stability of the container and prevents individual products in correspondingly grouped containers from falling out sideways. With suitable additional devices, a complete closure of the containers is possible by sealing, crimping, and folding the sides. The SKINETTA stretch banding machine program includes six basic models for film widths from 25 mm to 200, 290, 440, 590, 790, and 1250 mm. To increase output, two- to four-lane systems are available in addition to the single-lane version. - With the SK series (semi-automatic), the products are grouped on the machine table by an operator. Insertion into the film and the subsequent stretch banding process is triggered either by a foot switch or a two-hand control. Full automation is possible at a later date (except for the SK 200 model). - With the ASK series (fully automatic), the products are fed, grouped, and then banded fully automatically using appropriate additional equipment. A modular system of feeding, grouping, forming, and special equipment, based on over 20 years of experience, allows adaptation to the most diverse customer tasks with proven standard elements. Technical data: Machine dimensions (base machine) Length: 1670 mm Width: 980 mm Height: 1700 mm Table height: 1700 mm Weight: 400 kg Power connection: 400 V Ndodpfx Amjp U T Ifotoc Power consumption: 6.1 kW Additional equipment: slat conveyor You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: ready for operation (used), Year of construction: 1998, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, Packaging machine for automatically sealing cardboard boxes on both the top and bottom with packaging tape. Ideal for efficiently processing boxes in warehouses, production environments, and logistics departments. Ensures a neat and secure seal, making the boxes ready for storage or transport. Video available upon request. Ndedsz R A Syopfx Amtec

Condition: like new (used), Year of construction: 2016, ANCIMO AC-60 CL AUTOMATIC BUBBLE PACK THERMOFORMING AND SEALING MACHINE Manufacturer: ANCIMO Model: AC-60 CL Year of manufacture: 2016 Condition: Excellent. Very few operating hours. Complete documentation available. GENERAL DESCRIPTION Automatic machine for the production of blister packs through thermoforming, filling, and sealing, designed to work with a wide variety of materials such as PVC, PVDC, polyethylene, aluminum, and laminated materials. The system allows for cavity formation through thermoforming, as well as subsequent sealing with upper materials such as aluminum, cardboard, or plastic film, resulting in a high-quality and attractive finished package. The machine is in excellent condition and has complete technical documentation. TECHNICAL SPECIFICATIONS • Thermoforming area: 400 x 200 mm • Heat sealing area: 400 x 200 mm Ndjdpfx Ajzcftgomtec • Installed power: 21 kW • Electrical power supply: 380 V III + N • Approximate dimensions: 7,400 x 963 x 1,900 mm COMPATIBLE MATERIALS • PVC • PVDC • Polyethylene (PE) • Aluminum • Cardboard • Laminated materials and other thermoformable materials EQUIPMENT INCLUDED • Automatic thermoforming unit • Heat sealing system • Trimming unit for individual blisters • Unwinder / film feeder • Rewinder for collecting trims and waste • Coil handling trolley • Coil loading trolley • Format changeover trolley DOCUMENTATION • Original manuals • CE marking • Electrical diagrams • Pneumatic diagrams ADVANTAGES • European manufacturing • Year 2016 • Very few operating hours • Excellent overall condition • Wide range of compatible materials • Format changes using a dedicated trolley • Available for immediate inspection

Condition: excellent (used), Endoline Carton Erector Model 221 With bottom taper Serial number: 051235542 415 V, 3 Ph, 50 Hz Ndjdpfx Amsv Tywwotec Dimensions carton erector: 1850 mm x 1850 mm x 2150 mm Including outfeed roller conveyor, roller width: 400 mm Dimensions roller conveyor: 1750 mm x 800 mm x 550 mm.

Condition: new, total length: 4,500 mm, total width: 8 mm, PB-Strapping strapping band, 8mm, length 4500m, core 200, black We offer the PB-Strapping strapping band. Manufacturer: PB-Strapping Type: 8045 Order number 0365512 272 Color: Black Tensile strength: 910 Core dimension: 200 Ø internal (mm) Width (mm): 190 Length / spool: 4500 m ⭐ Condition: New Scope of delivery as shown in the picture 9 pieces available. Price: Per piece Shipping is possible, but the buyer pays the shipping costs. Shipping: €9.95 Nedoza Dmyjpfx Amtodc

Condition: ready for operation (used), A fully automatic tray sealing machine Sealpack is available. Packaging capacity: 10-12cycles/min, max. film width: 420mm, max. tool temperature: 210°C, max. sealing tool weight: 150kg, max. sealing dimensions X/Y: 280mm/345mm, max. tray height: 120mm, max. film roll diameter: 400mm, max. film core diameter: 3inch, max. roll weight: 65kg, closing pressure: 1450kg, tool trolley dimensions X/Y/Z: 1100mm/950mm/1400mm. Machine dimensions X/Y/Z: approx. 3150mm/800mm/1700mm, weight: approx. 1600kg. Including one tool trolley. Documentation available. An on-site inspection is possible. Nodpfx Aeyxq U Nemtjdc

Condition: ready for operation (used), Year of construction: 1990, operating hours: 160,857 h, functionality: fully functional, machine/vehicle number: 396, type of input current: AC, input voltage: 400 V, compressed air connection: 8 bar, sheet thickness aluminum (max.): 80 mm, pressure: 16 bar, film width: 560 mm, roll diameter: 1,200 mm, overall weight: 3,000 kg, input current: 48 A, heating capacity: 19.4 kW (26.38 HP), Equipment: cooling unit, documentation/manual, ILLIG RV 53 Thermoforming Machine + a cooling unit – PS, PVC, PET & Other Thermoplastics Njdpfjz Hi Ilsx Amtedc The machine is suitable for the production of thermoformed products from PS, PVC, PET and other thermoplastic materials. The machine has been regularly maintained and well cared for throughout its operating life. It has only been used for approximately a few hours per day on average, resulting in relatively low operating hours for a production machine of this type. The machine is still in operation, allowing prospective buyers to inspect it under working conditions. A live demonstration is available by prior appointment. This is a good opportunity to acquire a well-maintained ILLIG RV 53 thermoforming machine with the advantage of being able to inspect and test the machine in actual production before purchase. Further technical specifications, photographs and additional information are available upon request.