Used Paint Sprayer for sale (4,266)

Condition: good (used), Year of construction: 1994, Working area approximately 2,080 x 1,430 mm, Iedpepvil Tjfx Ap Dobc lateral impact plates on the right and left, filter area approximately 1,800 x 1,300 mm, 2 rows of paper volume filters approximately 650 x 1,800 mm, internal fine filter G4 approximately 1,350 x 2,000 mm, air flow rate 4,500 m³/h, pressure max. 500 Pa, motor 1.1 kW / 1,400 rpm. Ex works, as inspected, from the Seevetal location, subject to prior sale.

Condition: used, Year of construction: 1999, No. 5 roller blinds, motorized, for drying varnished chairs or similar products (see video) Available dimensions: mt. 4 x 22.5 Ibodpfx Apeyaqy To Dsc mt. 4 x 24.5 mt. 4 x 24.5 mt. 2.3 x 27.5 mt. 2.3 x 27.5

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 111313, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: R-30iA, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended for painting blades for wind turbines. For this purpose, it was installed on a 60 m long rail, which had another rail with which the robot could travel up and down. For this reason, two large additional amplifiers are installed in the control system. This is why the encoder break module is also present twice. Another special feature of this robot is that motors are installed in the shoulder to control two gear pumps. So a 2-component mixture on the robot is no problem. The robot was never actually used. The operating hours only occurred because the robot was live. This was also confirmed to me by the operator of the system (Enercon). The actual servo ON time is 0.2 hours. The robot has slight soiling, but is practically as good as new. Unfortunately, the teach pendant and the teach cable are very dirty. However, this could be replaced if necessary. The cable length between the robot and controller is 5m and can be plugged into the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. We have two of them. The price is for one robot. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. Iodpfxstu Hpqe Ap Debc The device can be inspected under voltage at Paintrobotics.

Condition: used, The painting line consists of the following elements: 1) MTL.120 monorail, 600 kg load capacity, equipped with hooks and rotation drive 2) Dry spray booth for painting 3) Dust extraction booth 4) Ducted solvent extraction system 5) Ducted paint oven system 6) Reciprocator for electrostatic spray guns 7) Wagner 30:1 high-pressure pump for solvent-based electrostatic installation Iedsyy Rivepfx Ap Djbc 8) Protective enclosure for low-pressure ASAI system 9) Flow coating system 10) Low-pressure pump for ASAI electrostatic installation

Condition: like new (used), Year of construction: 2011, functionality: fully functional, volume flow: 230,000 m³/h, nominal power (apparent): 22 kVA, For sale: filter for removing haze from paint. Fine dust filter. Isdpfx Aszhbqqsp Debc

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 07022/01, We are offering this used Cefla Finishing SPRAYBOTIC RU MW machine, manufactured in 2007. Ijdpfx Ajzhbd Rsp Dobc Machine type: SPRAYBOTIC RU MW Year of manufacture: 2007 Serial number: 07022/01 Supply voltage: 380 V Electrical frequency: 50 Hz Total installed power: 38.5 kW If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2005, Collomix Rota 30 Paint Mixer The Collomix Rota 30 is a high-performance biaxial mixer specifically designed for the fast and efficient mixing of paints, varnishes, and plasters in closed containers. It features a biaxial mixing process in which the container rotates simultaneously around two axes, enabling mixing times of less than 90 seconds, even with heavy materials. Features and Ergonomics Automatic clamping: After insertion, the mixing container is automatically fixed and centered. Safety features: Integrated safety door lock and an emergency stop button; the door only opens after the mixing unit has come to a standstill. Handling: Equipped with extendable rollers and height-adjustable machine feet for easy positioning. Durability: An integrated "splash guard" mechanism protects the drive components from contamination by leaking paints. Application areas The device is primarily used in the paint wholesale and retail trade, as well as in the chemical industry. It is often used as a system component in paint dispensing systems to mix color pigments into base paints without clumping. Collomix Rota 30 Paint Mixer For mixing: Ibedpey Nxh Eofx Ap Dec Paints Paint granules Facade paints Industrial paints Plasters Other low-viscosity materials Max. mixing weight: 35 kg Recommended continuous mixing weight: 30 kg Max. container height: 60-400 mm Year of manufacture: 2005 More paint mixers in other sizes - new and used - can be found in our shop! International shipping costs available upon request!

Condition: used, Mobile Painting and Drying Rack – 328 cm Industrial Mobile Hanging Rack for Painting, Coating, and Drying Heavy-duty mobile metal rack designed for hanging, transporting, and drying painted or coated components in industrial production environments. Ideal for furniture manufacturing, woodworking, metalworking, spray painting workshops, and industrial finishing operations. The open-frame construction allows convenient access to suspended components during painting and provides space for air circulation during drying. The rack is equipped with a sturdy welded steel frame, upper horizontal hanging bars, diagonal reinforcements, and caster wheels for easy movement between preparation, painting, and drying areas. Technical specifications: Length: 3,280 mm Height: 2,100 mm Construction: Welded steel frame Mobility: Caster wheels Application: Painting, coating, hanging, drying, and internal transport Condition: Used, with normal signs of wear Ibedpfx Apez S Tq As Doc Available quantity: 3 units Price: €250 per unit, excluding VAT. The equipment is located in Gātciems, Latvia. Inspection is possible by prior arrangement. Loading assistance is available. Internal reference: 49914-26.

Condition: good (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 40 kg, CABO Mixspace Multispeed Paint Mixer Gyroscopic Mixer (gyromixer) Year of manufacture: 2015 Display Alphanumeric 20 x 4 Maximum bucket weight 40 kg Bucket holder tray Pull-out Bucket gripper Automatic Gyroscopic ratio 1:1.8 Speed ​​settings 3 programmable Mixing speed 80 - 180 rpm Acceleration / deceleration during the mixing cycle Automatic speed adjustment to the bucket height Mixing cycle time 20sec - 30m Maximum bucket diameter 380 mm Bucket height: min - max 90 - 490 mm Bucket height 340 (+30) mm Bucket types Round/Square/Oval Ijdpfxevmtw Rs Ap Debc Mains voltage: 230v 50Hz 3A Machine weight 190 kg machine dimensions: width:860mm length:850mm height:1150mm

Condition: used, For sale is a professional, industrial-grade painting station built with components from the renowned brand GRACO. The core of the system features two Endura-Flo™ 4D350 high-pressure pneumatic diaphragm pumps. These pumps are characterised by a best-in-class pressure ratio and exceptionally low fluid pulsation. Additionally, the station is equipped with two advanced Graco DataTrak™ control and monitoring panels, which control pump operation in real time, count cycles, and protect the system from running dry. The entire assembly is mounted on a heavy-duty, factory steel frame (stand). Technical Specifications: • Manufacturer: GRACO (USA) • Pump Model: Endura-Flo 4D350 Ijdpfx Apez Hw Aqe Debc • Quantity: 2 pumps included in the set • Pressure Ratio: 4:1 • Displacement Per Cycle: 350 cc (350 cm³) • Monitoring System: 2x Graco DataTrak (electronic control and runaway protection) • Compatible Fluids: Solvent-borne and waterborne paints, varnishes, lacquers, catalysts • Overall Dimensions of the Station: 152 x 237 x h=132 cm

Condition: ready for operation (used), Anti-spark centrifugal extractor fan Cardboard filters “Paint-Stop” filter Electric panel with IP55 protection class Ijdsw Rpxcepfx Ap Djbc Ceiling light with IP65 protection class Emergency push-button Discharge hopper

Condition: used, Mobile Paint Drying Racks – Double-Sided, 6 / 12 Levels Heavy-duty mobile drying racks for storing and transporting freshly painted, lacquered, or coated workpieces during the drying and finishing process. The racks feature a robust, welded steel frame with support arms on both sides. Individual levels allow painted parts to be stored separately, preventing contact between the workpieces. Mounted on casters for easy movement between painting, drying, and production areas. Suitable for furniture and woodworking production, paint shops, metalworking, printing, and other industrial coating applications. Two versions are available: 12-level version Quantity available: 12 pcs. Approximate dimensions: 600 × 2200 × 1200 mm 12 support levels Double-sided construction Mobile on casters Price: €450 excl. VAT / pc. Ref.: 47444-132 6-level version Quantity available: 2 pcs. Approximate dimensions: 600 × 2200 × 1200 mm 6 support levels Double-sided construction Mobile on casters Price: €390 excl. VAT / pc. Ref.: 47444-132/1 Total quantity available: 14 pcs. Ibsdpsz I Tynefx Ap Dec Used industrial equipment in good working condition with normal signs of use. Available individually or in larger quantities. Located in Gatciems, Latvia. Inspection is possible by appointment. Loading assistance is available. Delivery within Europe can be arranged upon request.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2433380060, overall weight: 176 kg, nominal power: 0.75 kW (1.02 HP), rotational speed (max.): 950 rpm, protection type (IP code): IP54, The devices in the COLOUR JET series are optimally designed for extracting paint mist and solvents at wet painting workstations. The front guide plate ensures that the mist is captured from below and at the side inlets, as solvents from paints settle and collect near the floor. At the same time, the guide plate enables uniform air distribution over the filter and protects the filter medium from direct exposure. Paint pigments are separated by the large-area replaceable filter, and the cleaned exhaust air is then discharged to the outside via a pipe or hose. Ibodpfx Ajzkgwnsp Dec Dimensions (W x D x H) in mm: 1,012 x 1,405 x 943

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. Ibsdpfx Aotu H Avjp Dsc At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. We would bring the device to us from Frankfurt.

Condition: used, Year of construction: 2008, functionality: fully functional, Technical specifications: Washing booth: Manufacturer: Hege Year of construction: 2017 Washing equipment: Steam cleaner, electrically heated Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 8000 x 5000 x 3000 mm Preparation room Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 5140 x 4120 x 3000 mm Painting booth Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air / Recirculation mode possible Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 1 Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Recirculation mode Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 2 Manufacturer: Hege Year of construction: 2017 Ventilation: Recirculation mode Heating: Pumped hot water Dimensions: (l x w x h) 5840 x 4120 x 3000 mm Lift and lower station Manufacturer: Hege Year of construction: 2017 Lifting capacity: 980 kg Manual push conveyor: Year of construction: 2008 / Extension 2017 Isdszdc D Sspfx Ap Djbc Load capacity: 400 kg/m Operating mode: manual

Condition: used, No. 3245 Ijdpfjxpilxjx Ap Djbc Commissioning trolley / paint drying trolley Reinhold Beck Maschinenbau Trapez Used, good condition A total of 9 units available For space-saving storage until further processing For lacquered panels, strips or profiles Shelf width 500 - 2000 mm Shelf depth 510 mm 15 shelves, lined with rubber or foam Distance between shelves approx. 78 mm Load capacity per shelf 40 kg (600 kg in total) Mobile, some with brakes Castors in various designs Transport dimensions approx. 800 x 700 x 1850 mm LWH Weight approx. 90 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Automatic wooden chair painting system, already disassembled and sold in separate pieces: - 3 roller shutter belts, 2.5 metres wide - 3 roller shutter belts, 4 meters wide - 2 painting chains consisting of tracks, chain, towing motor and hangers - spray booths - correspondence desks Ibodpfxjxlb E Aj Ap Dec - various

Condition: ready for operation (used), machine/vehicle number: 89915, Drive system = compressed air, Material/air ratio = 16:1, Maximum material pressure = 90 bar, Air inlet pressure = 1 to 6 bar, 4 double strokes per 1 liter of material, with MX type spray gun with double hose, unused since the last maintenance in 01/20, Condition as inspected, Ex works, from warehouse Seevetal, subject to prior sale. Iedsiv Huwspfx Ap Dobc

Condition: excellent (used), mileage: 168,247 km, first registration: 11/1979, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 5,700 mm, total width: 2,230 mm, total height: 2,860 mm, Year of construction: 1979, = Additional options and accessories = - PTO (Power Take-Off) = Further information = Usable material: Bitumen Suspension: Leaf suspension Front axle: Steered Number of cylinders: 6 Number of chambers: 1 Pump: Yes Technical condition: Very good Ibsdpfx Apowizq Ae Djc Optical condition: Very good Please contact Thierry Leemans for further information.

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 2,900 mm, total length: 1,100 mm, total width: 3,150 mm, working width: 3,000 mm, Manufacturer: Heimer Model: TSW-R 22-22 Ibedpfx Aszlrrmop Dec Year of manufacture: 2007 General / technical data: Used spray booth with dry filter technology (TSW). The spray booth has a modular design and can be connected to an exhaust unit. The filter mats above the paint booth absorb the particles during the painting process within their structure. Due to the modular design, the filter mats can be easily replaced. Dimensions (h x w x d): 2900 mm x 3150 mm x 1100 mm

Condition: used, For sale is a complete industrial painting station, equipped with two highly efficient pneumatic double diaphragm pumps of the GRACO Triton® 3:1 350 type. The pumps in the Triton series were specifically developed for demanding finishing applications in the metal and wood industries. Thanks to the 3:1 ratio, they generate a high material output pressure and deliver an extremely even, pulsation-free spray pattern. The stainless steel construction allows for trouble-free use with highly viscous, abrasive media, as well as water- and solvent-based paints. Isdpoz Im I Sefx Ap Dsbc Technical specifications: • Manufacturer: GRACO (USA) • Pump model: Triton 3:1 350 • Number of pumps in the set: 2 • Pressure ratio: 3:1 • Max. air inlet pressure: 0.6 MPa / 6 bar (88 psi) • Max. material working pressure: 1.8 MPa / 18 bar (260 psi) • Material: Stainless steel (SST) for maximum chemical resistance • Overall dimensions of the station: 152 x 252 x H=132 cm

Condition: used, Year of construction: 2020, operating hours: 2,563 h, power: 192 kW (261.05 HP), Equipment: air conditioning, all wheel drive, cabin, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: Fendt Rogator 655D sprayer Registration date: May 20, 2021 Production unit: .563 Pump hours: 1,500, sprayer hours: 695 Transmission: 40 km/h 2 rotating beacons 8 headlights at the top front, 6 headlights at the bottom front Work lights at the top rear Full cab with air conditioning, Category 4 Joystick control 2 monitors / Varioterminal 10.4" 2 camera systems Air conditioning Radio, Bluetooth, USB port, hands-free phone system 2nd seat Refrigerator and warming cabinet 3" suction hose 3" high-performance pump system Stainless steel centrifugal pump 785 L/min 5-way valve, stainless steel, electric 1 Agromie basic package Contour Assist 2 water connections on the driver's side at the bottom for supply and drainage 2 partial widths 18 and 36 m / nozzle bar Dualtec 2+2 Rinsing gate Electric tank level sensor Spray nozzles 0.5 at the front + fertilizer nozzle behind it Nozzle XRC11003-VP set, 75 pcs 2 sensors on each side for slope compensation Large tank 6,000 L, rinsing tank 500 L Air compressor with pneumatic system Mechanical ground sensor Optisonic boom height control Variable Tecontrol Varioguide RKT Novatel Emergency steering Optisonic height control Central lubrication Hand wash tank and soap dispenser on the driver's side at the bottom Small storage compartment under the cab on the driver's side Retractable step with storage area Storage compartment on the passenger side at the bottom Both axles steerable Trailer coupling Iedpfx Ajz Edlvop Dobc 2-wheel, 4-wheel Tires: Allianca Agriflex IF 480/80R50, front approx. 60%, rear approx. 80% 2 track widths, Optitrac hydraulic track adjustment Price: € 165,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of € 10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are subject to change.

Condition: good (used), Spray booth with extraction system and cabinet – Used painting system for workshops and industry This spray booth with integrated extraction system and practical storage cabinet is the ideal solution for professional painting work in workshops or production facilities. Technical specifications External dimensions of the spray booth: 72 cm (width) × 60 cm (depth) × 80 cm (height) Extraction system integrated for optimal dust and paint fume extraction Cabinet with storage space: 72 cm (width) × 109 cm (depth) × 100 cm (height), incl. 6 drawers Materials & surface: powder-coated steel, rust-resistant Airflow & filter technology: pre-filter + fine filter, exhaust system Colors / Design: green & black (custom colors available on request) Modularity & expandability: can be part of a larger painting system Condition / quality: (New / Used, inspected) Warranty / service: 12 months warranty, spare parts & maintenance available With its compact dimensions of 72 cm width, 60 cm depth and 80 cm height, it offers an efficient work surface with minimal space requirements. The cabinet with 6 drawers (72 cm × 109 cm × 100 cm) provides ample storage space for tools, paints and accessories. Iedpeg I Dhgsfx Ap Dsbc Complete workshop equipment, large selection of mezzanine floors, pallet racking, shelving, paternoster lifts. High-quality industrial machines, lathes, grinding machines, handheld machines. You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Painting line Manufacturer: Giardina, Rich Fruit, Neomec, Kremlin The painting system is designed for painting elements made of MDF or HDF boards. The spray booths have two circuits, one for clear coats and one for colored paints. The system is designed for water-based UV coatings. The system consists of the following elements: Infeed Manufacturer: Neomec Conveyor table with a cleaner Spray painting machine Manufacturer: Giardina Type: Dualtech 416 Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Iedpezuzg Sofx Ap Dobc Turntable Conveyor table Conveyor table with a cleaner Spray painting machine Manufacturer: Rich Fruit Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Each booth has two circuits, one for paint and one for coatings, driven by KREMLIN pumps and spray guns from the same company. Length of the machine line: 92 m Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, power: 157 kW (213.46 HP), Equipment: all wheel drive, cabin, More data and images will follow! More photos and details coming soon! -----Internal vehicle number: 12255 Errors and prior sale excepted. Isdpsw Nfb Rofx Ap Debc